How to unlock the Bosch Logixx 8 Varioperfect washing machine?
Unplug the machine from the socket. Then, on the front panel, open the drain filter, and check the presence of the emergency hatch opening cable in this machine. If there is one, you need to gently pull it, and the door will unlock.
Open the Bosch logixx 8 door and press the button to the left marked “options”. Hold down the button until the machine beeps and the lock is released. On Bosch maxx 5 you need to press the start/pause button and hold it for about 6-8 seconds.
How to remove the lock from a Bosch Serie 4 washing machine?
How to unlock the Bosch Serie 4 washing machine To deactivate the childproof lock, press and hold down for 3-5 seconds the Anti-smoke and End by.
Turn on the machine. Hold down the power key with one hand and turn the programme lever 2 steps to the left with the other hand. After a couple of seconds, release the power button. The display will show the duration of the selected program, or all LEDs will blink simultaneously if the model has no display.
How to remove the lock on a Veko washing machine?
To disable the child lock, press the 2nd and 3rd buttons simultaneously for 3 seconds. The display shows “C:OFF” (child lock is off).
Resetting Bosch Classixx washing machine errors
Press the “Start” button. Without releasing it, turn the selector counterclockwise by 2 divisions. The machine will enter the service menu and lock the door. The “Start” button can be released after 2 seconds.
How to reset an error on a Bosch washing machine?
You can also reset the complete washing machine program by pressing the “Start” or “Pause” button. In this case, press and hold the button for 5 seconds. In this way you can reset the error on your Bosch washing machine.
You have probably noticed that during the washing the key or padlock symbol appears on the washing machine display. We hasten to reassure you, if there are no other complaints about the washing machine operation, then the appearance of the lock indicator is a perfectly normal situation, indicating the locking of the door.
Bosch Logixx 8 washing machines: general features
The machines in this series have the same standard dimensions (60 x 60 x 85 cm), although they give you more loading capacity. Models provide class “A” washing with economical energy consumption at “A” and “A” level. Depending on the model, the spin speed can be 1000, 1200 or 1400 revolutions.
The water consumption per cycle (cotton, full load, washing temperature 60 degrees) is 56 liters, power consumption is 1.35 kilowatts.
The models of the range are equipped with the modern brushless motors of direct EcoSilence Drive type, which provides up to 30% power saving, is much quieter than conventional motors and has a longer service life.
The special noise- and vibration-absorbing AntiVibration system ensures the quiet operation of the machines of the series. The essence of the system lies in the special design of the side walls of the units.
The machines of the series are equipped with detergent trays of three sections, of which two are for bulk products and one for liquid products.
All models are covered by a one-year warranty.
Bosch Logixx 8 washing machines: operation
Bosch Logixx 8 washing machines are equipped with electronic control, which is implemented by a rotary programmer, buttons and LCD-display.
You can select one of the washing programs from the programmer. enables the setting of options such as washing temperature, spin speed, degree of soiling, delayed start, economical washing, ironing, interface language, sounds, etc. The programmer can be rotated in both directions.
The display shows data relating to the parameters and the washing stage, error codes, activation of the safety functions, time remaining to the end of the wash, etc.
The models of the series do not have an automatic laundry weighing function, but can determine the approximate quantity by volume (drum load indication). Accordingly the machine determines the amount of water necessary for washing (consequently less energy will be needed for water heating). The display shows the detergent recommendations (as a percentage of the full load).
Individual settings, Individual settings. User manual Bosch Logixx 8 VarioPerfect WAS24443OE Spin speed 1200 rpm
This function allows you to change the spin speed and temperature before and during the programme
programs. The result depends on the stage of the programme.
The washing temperature displayed on the display can be changed. Each programme has a maximum wash temperature selection limit.
After selecting a programme, the display shows the programme duration. You can delay the start of the programme
programs. The time to finish is set in one hour increments. max, up to 24 hours. Press the button © (Time to finish) until. until required number of hours (b=hour) appears on display.
© (Spin speed in./min) / а (Without spins)
You can change the spin speed shown on the display or select ^ (No spin = no finish
For a shorter wash and spin cycle; after the last rinse, the laundry is still in the water; Ⅲ Extraction speed: at least 30 minutes after the last rinse, the screen displays.). You can
Change the spin speed shown on the display. The maximum spin speed depends on the machine model and the program set.
Speed Perfect For shorter wash times with comparable washing quality to the standard spin speed
program. Max. number of loads per load. cm. “Program Review.”,
To save energy at a wash quality comparable to that of the standard program.
2 (Easy ironing) Special spinning operation with subsequent laundry loosening. final
Spins at a lower spin speed to leave the laundry more humid than normal.
^ (Water plus) Increased volume of water. Gentle washing of laundry.
You can protect the washer-dryer from unintentional changes to the settings
settings.on./Off.After starting or ending a programme, press and hold the M (Start/Delivery) button for approx. 5 sec.Note: the child safety lock can remain active until the next programme, even after the machine is switched off.
In this case, before starting the program. child-proof lock option should be deactivated-
tivate. and after starting the program if necessary. reactivate. Note:
of the programmer has been changed. To avoid interrupting the program, install the programmer
back to the original program, the ^ symbol lights up again continuously.
If you want to add more laundry after the program has started, press the
M (Start/restart) key. The washing machine checks whether it is possible to add more laundry.
UE5 (YES) symbols lit steadily: laundry can be added.Symbol pi (NO) flashes: wait until CHE5 (YES) will illuminate continuously.
Note: Only open the door when both symbols are lit
on (NO): adding laundry is not possible.Note: The door will remain closed for safety reasons if the water level and/or temperature is high or during spin cycle.To resume the program, press key M (Start/Deload).
If no operation is performed for several minutes before starting the program and after the program has run with the washing machine switched on
the backlight goes off and the M (Start/load) key flashes and the washing machine is switched on for several minutes. Press any key to turn on the backlight.
Warning tone volume.
By consecutively touching the indicated key
To start the program or to add laundry and to activate/deactivate the childproof lock.
Hardware disabling the lock
If the machine has already finished washing, but still does not remove the lock, it means that you have to disable the key on the screen without the help of others. It is not difficult to do this: just press the Start/Start button for 5-6 seconds. Holding down the power button should restart the system and cause all options to reset. Then UBL will shut off and the light will stop blinking.
This is a critical system reset that resets all the previous options. A similar restart is needed when the washer does not respond to button presses.
If restarting does not work, and the key lights up again when starting the system, it means that there has been a malfunction. It is necessary to check the door mechanism and test the UBL with the control board.
How to unlock the washing machine Indesit
To unlock its door, you must first make sure that the machine has fully pumped out the water from the drum.
If there is no water in the machine. try to remedy the situation by performing a complete reset of the software. unplug from the socket and let stand so for about half an hour. During this time, the program will reset and the door will unlock. If you do not have time to wait that long, start the washing mode again. Before it starts, the machine, first, will reset the lock, and then, start it again. You will be notified by a beep if the door of the washing machine is open. All you need to do at this point is to open the door and cancel the wash.
Another solution is to use the emergency opening cable at the bottom of the machine; if water remains, use the “Drain” function. If it’s faulty, you’ll have to drain the water yourself, using the drain hose. Then, use the previously discussed methods of solving the problem.
How to disable the child lock on the washing machine?
Your LG washing machine has a child-proofing system activated (red face-lock on the control panel is flashing). To disable the child lock, press and hold the “Temperature” “Spin” button for 5-10 seconds.
How to disable the childproof lock on a Bosch washing machine:
- On Bosch logixx 8, you must open the hatch door and press the button that is marked with an arrow to the left “Options”
- On the Bosch maxx 5 you need to press the start/pause button and hold it for about 6-8 seconds
- On the Bosch WAS 20443, a similar lockout is removed in the same way.
How to disable the key on a Bosch washing machine?
The flashing key on the display of your machine means that you have the childproof lock on. To turn it off, press and hold the Start / Pause button for 5 seconds.
Unplug the washing machine from the socket and leave it for 10-30 minutes. After. gently press the door near the lock and try opening the hatch again. Please note! This method will help if the cause is a faulty LOS.
How to open the door of a Bosch washing machine
But the handle breaks in stages, before that you have to watch how hard it is to close and open the door. If this is the case, do not hesitate to call a service technician for diagnosis.
The boot lid may not open due to a broken water sensor or a broken control panel.
You can try to repair them yourself. When doing this kind of repair, check whether the machine is unplugged. Do not forget that you are an inexperienced technician, and repairs can be expensive later. Therefore, entrust the matter to an experienced specialist, who will immediately determine the cause of the breakdown and fix your washing machine Bosch.
Video instruction for self-repair.
The task of the organization, especially the established structure of the organization is largely responsible for the creation of new offerings.
In our apartment, in the kitchen, we have a Neff integrated dishwasher. And as you understand, it would take a lot of time and effort to dismantle it and bring it to a repair shop. That’s why we invited the master of this service center with home repair. It has been running smoothly for three years, but the time came when it needed repairs. All the problems were in the water quality. That’s what caused the machine to malfunction. The technician advised to put an extra filter, specifically for the dishwasher. No more problems in the future. Also very nice that before coming to the workshop, he asked about the model of the machine and what was wrong with it at the time of the failure. This gave him the opportunity to take all the necessary parts with him at once, and make repairs on the spot. Very satisfied with the repair and the craftsman who made it.
We have a very small family, there are only two people in it, and the Bosch dishwasher is also a compact size. This machine has served us every day for 8 years without any problems. But there came a point when it just stopped working. Before I went to work, I called the repair shop and arranged to bring them a dishwasher for repair. They didn’t even ask for the model, they just agreed to do it. Brought it, left it, said that when they fix it. call back. Already in the afternoon I got a call, the car is fixed and I can come get it. After work, so I did. In fact, we only had one day without a dishwasher. Everything was done very quickly.
Not so long ago, asked for repair when my wife said that the dryer (which we have brand Miele) no longer works, or rather stopped spinning drum in the machine when you try to run it. There was nothing to do, so I called the master. A young man came, took a look and said that we broke the control unit board, voicing the price of repair. I expected a much larger amount, so I was glad when I heard the figure in half than expected. Overall satisfied, the repair took more than an hour, with the master is very accurate in his work, I had time to observe the process, while talking on distracted topics, he slowly carried out repairs.
On the Internet I found your site. Washing machine Bosch. After the request, the next day Baranov Alexander Leonidovich came. Master of the highest category. Professionally, methodically, with knowledge of his business eliminated all the problems: replacement of the heater, leaking, knocked out the RCD. Lots of problems. I have already been to the repair shop once. The wizard on the leakage waved his hand: “it happens”, replaced the heating element, although it was in working order. In short there is something to compare. That’s why Alexandr Leonidovich meticulousness and attention surprised and pleased! THANK YOU! I agree with Irina: YOU ARE THE BEST.
Safety Instructions, Flow Options, Wet Instructions. Bosch Logixx 8 VarioPerfect WAS24443OE Instruction Manual Spin Speed 1200 RPM
Attention! The text in this document was recognized automatically. To view the original page you can use the “Original” mode.
Safety Precautions
Risk of electric shock!
These instructions are enclosed with the washer-dryer and must be followed according to the recommendations given therein.
The message AIR FRAME is displayed on the screen when a child is trapped inside the machine, endangering their own lives.
containing solvents such as stain removers, flushing gasoline, after filling with water could cause an explosion.Such laundry must be rinsed thoroughly by hand before use.
Risk of injury! The door of the service door can get very hot.
What to do if, Emergency unlocking, Service. Bosch Logixx 8 VarioPerfect WAS24443OE Instruction manual Spin speed 1200 rpm
Warning! The text in this document was automatically recognized. To view the original page, you can use the “Original” mode.
– Pressed ^ (Start/Download) or © (Time to End)?- Door hatch closed?- Childproof lock active? Deactivate it.^ с. 5.
– Program selected ^ (No spin)?.^ с. 3,4.- Clean the suction pump.^ с. 11.- Clean the drainpipe and/or drain hose.
Spin result is not satisfactory. The laundry is wet/creamy.
Squeeze out due to uneven distribution of laundry.
Distribute fine and coarse laundry evenly in the drum.
The program time changes during the wash process.
– This is not a malfunction. the program time is adapted
to the current washing process. This may cause a change in the program time on the display.
– Run the program Cotton 90 ° C without laundry. Use multipurpose
Detergent may come out of the detergent drawer
Mix 1 tablespoon of conditioner with ^l of water and pour this solution into the Cell II.
(Not suitable for washing outdoor clothing and down jackets!).
– Use less detergent for the next wash.
Strong pinches, vibration and movement of the machine when wringing.
– Transport locks removed?
– The power supply is interrupted?- Safety device tripped? Switch on/replace fuse.- Power saving mode is active? ^
– If problem occurs again, call service technician
Drum, control system compensates for imbalance.
of the power supply. An extra rinse cycle is activated.
Detergent residue on. Some phosphate-free detergents release laundry.
During the extra rinse cycle quickly. The water volume is too high. Unable to fill the laundry. If flashing ^ (Start/Download) is needed, close the injector door immediately and a warning beep sounds. Press key ^ (Start/Download) to continue program,
If you are unable to solve the problem yourself (by switching the appliance off and on again) or if the washer-dryer requires repair:
e.g. in the event of a power failure
The programme continues when the power supply is restored. If it is necessary to remove the laundry, open the door of the appliance door using the method described below:
Detergent solution and laundry may be hot. Let it cool down first.If the drum is still spinning, do not try to put your hand inside it.Do not open boot door as long as water is still visible through the door glass.
Set the programmer to Off. and unplug the power cord from the outlet.
Pull the emergency unlocking device downwards with a suitable tool and release.The appliance door will open after this.
If you are unable to reset the door by yourself, contact Customer Services