Can I drill a hole with an electric screwdriver?

Can I drill metal with an electric screwdriver?

It is possible, with modern screwdrivers you can make a hole without any problems.

An electric screwdriver is not just a construction tool, it is the most in-demand tool in everyday situations that sometimes arise in our lives. Electric screwdriver has many uses: tightening and unscrewing screws and screws, drilling in wood, metal, chipboard, OSB, plywood, tiles and other materials, as well as bricks and lightweight concrete (if there is a shock function).

Screwdrivers can be 2 types cordless and cordless. When comparing the two types, it can be said that the mains electric screwdriver has the advantage that it is always ready to work, while the cordless screwdriver needs to be charged (this could take several hours).

The ability to drill in various materials depends directly on the rotation speed and torque. With a high torque electric screwdriver can both twist self-tapping screws and drill. With a low torque, only soft materials, such as wood, can be drilled. To tighten screws, the rotation speed should be 400-500 rpm. If you need to drill, you should set rotation speed at 1200-1300 rpm.

Also, no less important in an electric screwdriver is the gearbox, which affects the angular rotation speed of the working shaft of the device. You need 1200-1500 rpm for drilling, 500 rpm will suffice for screwdriving.

If you choose a mobile electric screwdriver, then look to have a spare battery included to help avoid downtime. And if the first one fails, you do not have to rush out and buy a new battery. The cost of a new battery is 80% of a good electric screwdriver.

Screwdrivers can be equipped with different batteries:

The lithium-ion battery is considered the safest material for humans, but it is not resistant to low temperatures.

Before you buy an electric screwdriver, it is necessary to try it in action, many stores offer such an opportunity. electric screwdriver should be comfortable in your hand, otherwise you will have difficulty working with it, your hand will get tired very quickly.

Cheap and low-quality electric screwdriver can fail very quickly, so it is better to spend once for a good tool and work at your pleasure.

Task: drill holes in steel pipes (poles for video) and drive self-tapping screws in them. Capacity of 10-15 holes 2-4 mm in diameter per hour. There is a socket for recharging, there is no way to get 220 to the poles.

Yes, virtually all. if drills are properly sharpened. And if you are specific, then read out the amount allocated to the tool, and then will run into fans DeFort, Bort, Packard Spence, etc German-Swedish-Chinese brands and trample on the. р. I apologize in advance if this list does not include your famous company.

Screwdriver with two spare batteries, plus a conductor on the pipe, plus a reserve of drill bits. and off you go.

From my recent experience. Recently I drilled a dozen holes with 8 in 2 mm steel (4 at first, then 8), one with 4 in 10 mm steel, drilled 3 stuck screws, 2 holes with 4 in a few mm steel, I threaded them. Some 4k self tapping screws into the wood, drilled underneath them. hole for cable 8 in the wood 20 mm, then a few more screws in a dense plaster, the force on the verge of breaking the slot (if the hands and screw it in, it is very powerful screwdriver sweating a lot). Did something else for small things, screws, small screws, one hole in the plastic with a blunt drill. I can’t remember everything. ah, yes, before that the phone socket to the wall with a self-tapping screw, the other into the plug (did not go), a hole in the brick under it. All this on the same charger, charged a long time ago, in mid-November (t.e self-discharge must be taken into account), the charge is still there, how much. I do not know. I think that should cover the work you want out of it in an hour, and in that hour it charges another battery. So it’s all realistic.

But, IMHO, mandatory requirements should be:

I have a screwdriver Bosh Gsr 14.4-2, blue, two speeds, two batteries, charging an hour. Battery 14.4 V x 1.5 Ah. What does the index mean?2 do not know, I assume that because of the battery, t.к. model without it according to the parameters of 1:1, but the battery capacity of 1.2 Ah. Bought in the house for 3900, it’s cheap, just happened to get on some action Without the action is worth at least 4 with a few hundred. Good luck!

Greetings! In this article we will talk about whether or not an electric screwdriver can drill concrete. Sometimes it happens that you need to make a hole or a cavity in the concrete, and except for an electric screwdriver at hand do not have anything. Will have to think about what to do with it. There are of course impact screwdrivers, but even they will not cope with concrete. At the most they can do with a brick.

I still recommend getting a torch for that kind of thing. Even the cheapest one. You’ll be making holes in seconds. But if you need to do the job right here and now, you can try the following method. True for it in addition to an electric screwdriver and drill bit will require two more things. a puncher and a hammer.

You can use an ordinary drill bit for metal. but after this work, it instantly blunted and to drill metal it will have to sharpen later. If the electric screwdriver is an impact drill, you can use a brick drill bit with a carbide tipped tip.

How to prepare it for work?

The first thing you’ll need to do in order to get to work is to remove the electric screwdriver from its case or suitcase and check for any visible damage, chips or cracks. If you notice that there is something wrong with the tool, you must not use it under any circumstances, as it can be unsafe. Make sure that the battery of the electric screwdriver is charged, or that the electric screwdriver is plugged in. When these conditions are satisfied, turn the electric screwdriver on at idle speed and check that the nozzle rotation and the threads on the fastener match. If everything is correct, you can safely start working.

Do not forget to choose and properly fix the nozzle or drill bit depending on where and how you are going to work. We mentioned above how to attach them when we were talking about changing nozzles.

When using the instrument directly, there are also a number of simple rules and requirements to follow.

Pay close attention to the electric screwdriver itself. On it there is a special scale, by turning which it is possible to regulate the power of the tool. Turn the dial to the mode that you need based on the kind of work you are doing now.

Switching between these tool options is quite easy and straightforward. Just hold the electric screwdriver by the handle above the battery pack. The handle is most often covered with a material that is rubberized. This is why this machined handle is safe to use and ensures that the electric screwdriver does not fall out of your hand when you are working. the tool can also be strapped to the hand for extra security.

Screw with blown out edges

Flat head / half head screws (or rather slotted screws) often come off, and there can be several reasons for this:

• The use of old, low-quality or unsuitable tools;
• screwing in the wrong way (with a hammer, for example);
• Insufficient torque during unscrewing/screwing and, as a result, the screwdriver popped out of the slot;
• screw getting “stuck” (corrosion)
• incorrect use of hardware (without drilling, when necessary, or for the wrong material).

Is it possible to drill a hole in a concrete load-bearing or brick wall of a panel house with an ordinary drill, a torch, or an electric screwdriver without dust, how to do it

Making repairs in an apartment or house, there is always the question of drilling a wall. You can use different tools, depending on the purpose of the hole and the material of which the surface is made.

There are nuances when working with each tool, especially when drilling a wall. What is the right way to make the right hole, and what are the recommendations to follow??

Can an electric screwdriver drill into metal?

Can, modern screwdrivers can make a hole with no problem.

an electric screwdriver is not just a construction tool, it is the most in-demand tool in everyday situations that sometimes arise in our lives. Electric screwdriver has many uses: tightening and unscrewing screws and self-drilling, drilling in wood, metal, chipboard, OSB, plywood, tiles and other materials, as well as bricks and lightweight concrete (if there is a function of impact).

Screwdrivers may be of 2 types network and cordless. Comparing these types, it can be noted that the network electric screwdriver has an advantage in that it is always ready to work, and the cordless screwdriver needs to be charged (this can take several hours).

The ability to drill in different materials depends directly on the rotation speed and the torque. With a high torque an electric screwdriver can both drive self-tapping screws and drill. With low torque, only soft materials such as wood can be drilled. For tightening screws, the rotation speed should be 400-500 rpm. If you want to drill, then the speed should be set to 1200-1300 rpm.

Also, an important element in the electric screwdriver is the gearbox, which affects the angular velocity of the working shaft of the device. For drilling it is necessary to have 1200-1500 rpm, for screwdriving it is enough to have 500 rpm.

If you choose a mobile electric screwdriver, then look, that the included spare battery, which will help avoid downtime. And if the first one fails, you do not have to rush out and buy a new battery. The cost of a new battery is 80% of a good electric screwdriver.

Screwdrivers can be equipped with different batteries:

Lithium-ion battery is considered the safest material for humans, but it is not resistant to low temperatures.

Before you buy an electric screwdriver it is necessary to try it in action, many stores provide such an opportunity. The electric screwdriver must be a good fit for your hand otherwise you will have a hard time with it, your hand will get tired very quickly.

A cheap and low-quality electric screwdriver can fail very quickly, so it is better to spend once for a good tool and work at your pleasure.

The task: to drill holes in steel pipes (posts for video) and drive self-tapping screws there. Capacity 10-15 holes 2-4 mm per hour. there is a socket for charging, there is no possibility to pull 220 to the poles.

Yes practically all. if the drill bits are properly sharpened. And if you are specific, then read out the amount allocated to the tool, otherwise fans will come running DeFort, Bort, Packard Spence, etc German-Swedish-Chinese brands and trample on the. р. Apologize in advance if this list does not include your distinguished company.

A screwdriver with two spare batteries plus a pipe mandrel plus a supply of drill bits. and off you go.

In my recent experience. Recently drilled a dozen holes 8 in steel 2 mm (4 at first, then drilled 8), one 4 in steel 10 mm, drilled three dead screws, 2 holes 4 in steel a few mm, threaded them. Several screws 4 in the wood, under them drilled. hole under the cable 8 in the wood of 20 mm, then a few more screws in dense plaster, the force on the verge of breaking the slot (if the hands and screw it in, then a very powerful screwdriver pretty sweaty). I also did minor things, screws, small self-tapping screws, one hole in the plastic with a blunt drill. I do not remember everything. ah, yes, before that, the phone socket to the wall with a self-tapping screw, the other into the cork (did not go), a hole in the brick under it. All this on the same charger, charged a long time ago, in mid-November (t.(e self-discharge needs to be considered), there is still a charge, how much. do not know. I think that should cover the work you want out of it in an hour, and in that hour it charges another battery. So everything is real.

But, IMHO, mandatory requirements should be:

I have a screwdriver Bosh Gsr 14.4-2, blue, two speeds, two batteries, charging an hour. 14.4V x 1.5Ah battery. What does the index mean.2 don’t know, I assume it’s because of the battery, t.к. The model without it in parameters 1:1, but the battery capacity of 1.2 Ah. Bought at homeboy for 3900, it’s cheap, just happened to get on some action Without the action it costs at least 4 with a few hundred. Good luck!

Greetings to you! In this article it will be discussed whether or not it is possible to drill with an electric screwdriver in concrete. It sometimes happens that you need to make a hole or a cavity in the concrete, and there is nothing but an electric screwdriver at hand. You’ll have to think about what to do with it. There are of course impact screwdrivers, but even they can not cope with concrete. At most they can handle bricks.

Of course, I still recommend getting a torch for such cases. Even with the cheapest one. You can make holes in seconds. But if you need to do the job right here and now, you can try the following method. Truth to it in addition to an electric screwdriver and a drill will need two more things. a puncher and a hammer.

You can use an ordinary drill bit for metal. but after this work, it instantly blunted and to drill metal it will then have to sharpen. If an electric screwdriver percussive, you can use a drill bit for bricks with a carbide tipped at the end.

How to drill?

• First, you put the puncher to the desired location and tap it with a hammer until there is some indentation.
• Then you take an electric screwdriver and drill with the drill bit. This way you will remove what the drill bit has crumbled, and you can also move forward a bit more, as the drill is able to drill through the mortar. But it can not cope with a coarse aggregate, such as rock or gravel, so it can drill only up to bump into them.
• When the drill bit hits rock or rubble, then take the drill bit again and pound on it with a hammer.
• Repeat until you get the desired result.

It’s not an easy job and it takes a lot of effort. But nevertheless leads to the desired result. That is, the work that the peorator does on the move, in this case you have to do by hand with a punch.

If you work, you will run into rebar, then change the place of drilling. You can of course try to drill through the rebar with a metal drill bit, but this will be even more time consuming, so it is easier to change the drilling location.

Is it possible to drill through metal with an electric screwdriver

If you do not have a drilling machine or a drill, you can also drill metal objects with an electric screwdriver. The main thing is to choose the right equipment. The equipment for concrete, wood or ceramic tiles is shaped and ground differently. For metal, they are labeled with the letters HSS.

To increase durability and wear resistance, the working surface of the equipment is coated with nitride titanium. For steels with a hard structure, tools marked R18 are used. If Cobalt is added to the coating, the toughness of the equipment increases many times over. Now you can not think about how to drill out the lock cylinder of the entrance door with an electric screwdriver.

Even alloy steel can be drilled with an electric screwdriver if the drill tip is carbide-tipped. But this is already in the realm of experimentation, because it will not be cheap. If the metal is thin sheet, cone-shaped drill bits are used for drilling.

The equipment of an electric screwdriver for metal is designated HSS

Can an electric screwdriver drill through a concrete wall??

What electric screwdriver to choose for drilling in concrete?

At one time in many construction processes it is necessary to drill in concrete. A tool that can cope with a similar task. an electric screwdriver.

Design and characteristics

From the outside, as well as from the mechanical aspect, the electric screwdriver looks like a drill. The difference is the low rotational speed/ high torque.

Among other things, the screwdrivers have fixed speed characteristics (in drills, they are regulated without assistance). Speed control is essential for safe, high-quality tool operation.

The chuck stops when the screwdriver is fully tightened. Despite the chuck stopping, the engine is still in practice.

For a very type of work is designed for a certain speed / mode of operation. There is a reverse function, screwing, unscrewing screws (also nuts, screws, screws, soft materials). Doctors routinely use screwdrivers. Sometimes (work with drywall, interior assembly, creating a partition) the tool increases the speed and productivity of the work significantly.

Scheme of construction of a cordless electric screwdriver.

Screwdrivers are designed on a similar principle. The basis of construction:

• pistol grip (for work with the master hand);
• low weight;
• A starter button that starts/regulates rotations;
• power source. mains or battery (look at the fact that the battery is more massive and more expensive than the tool itself);
• the capacity is limited by the total weight of the tool;
• uninterrupted operation time of about 3 hours;
• Spare battery available (depending on model).

Advantages of

• autonomy (modern creation foresees no mains cable);
• Easy drilling in concrete (and other materials);
• The electric screwdriver can certainly be used for household repairs/installation/furniture assembly;
• Adjustable drilling speed in an electric screwdriver
• Many varieties for a particular type of work (electric impact screwdriver / cordless electric impact screwdriver, etc.).

Makita BHP452

Feature: battery charging completes within 20 minutes. The amount of braking/rotation can be adjusted without assistance, depending on the needs and goals. Built-in LED flashlight. Leads the screwdrivers in terms of speed and ease of switching.

Cordless electric impact screwdriver. The main differences are:

DeWALT DCD985M2

• the most powerful impact mechanism (drilling holes 13/60 mm in concrete, 16 mm in stone);
• 3-speed gearbox, the speed of which is adjustable by the user;
• it is easy to find 1 suitable combination of 22 for the rotary mode;
• Speed block integrated in the tool gives you extra control
• LED backlight;
• Specially designed chuck for drilling in different materials;
• functionality (tightly intertwined with technical characteristics);
• compatible with the fasteners, for drilling in metal/wood/stone/concrete.

Bosch Uneo

A cordless electric screwdriver capable of drilling in masonry/making holes in concrete monolithic blocks/screwing. Tool feature:

• ability to drill at a speed of 0, 9 Joules;
• weight is 1 kg
• Battery charge time of 3 hours;
• makes holes in concrete in a few seconds, with enough charge for 70 screws;
• the speed is self-regulating;
• The chuck can be replaced with any similar chuck (other brands can be used);
• 6-sided chuck.

Working rules

The rules for working with the tool on concrete are not complicated and do not set a clear framework. Remember about safety, do not put yourself and your construction in danger.

• Charge the tool beforehand (be sure to follow the charging times given in the instruction manual for your purchase. If you do not follow such rules, the tool can quickly become unusable);
• Put the right nozzle in the tool;
• Press down on it, bringing the chuck into motion;
• Use reverse to change the chuck or drill bit;
• Try not to expose the tool to shocks, strong mechanical impact, it can spoil its quality characteristics;
• After use, wipe, clean, and put it in a dry place out of the reach of children.

Tile drilling mistakes

If only a hand drill is available in the garage, even it can drill tiles. But the electric screwdriver is not in short supply, so it is better to use it. There are enough tricks, so without some experience, you can make mistakes.

Cracks and chips in the tile show that the work was done by a person without skills. Drilling was done in percussion mode, which is unacceptable. There are other signs of an incorrect drilling mode. Which can lead to damage to the ceramic tile coating:

• The drill bit rotates at high speed, overheating the tile:
• The user puts a lot of pressure on the electric screwdriver:
• the drill bit is not chosen correctly;
• Incorrect angle of inclination;
• The drill bit is sliding on the flat tile surface.

You have to drill in the center of the tile to avoid cracks

Cracks in the tile can appear as a result of excessive haste. If the tiles have just been laid, you don’t need to do anything with them for two days. Only then can you start drilling.

The ideal is to drill in the center of the tile. But sometimes holes are needed around the edges as well. And here it is necessary to proceed more carefully. And to the question of whether in this case you can drill with an impact electric screwdriver, it should be answered. no.

Drilling with a diamond drill bit

In fairness it is worth writing about such a method as a diamond drill bit in concrete.

There are special drills for diamond drilling, which are quite massive machines that drill with diamond crowns. And theoretically, such a drill bit can also be adapted to an electric screwdriver. These bits have a small 1/2″ threaded rod in the seating. And if your electric screwdriver has a chuck for 13 mm instead of 10 mm, it is possible to clamp such a bit right to this rod.

If the chuck at 10 mm, you need to think of some adapter.

However, this story has one fat “But!”which completely negates all of these plans. And this “But!”is the price of the drill bit, which is comparable to the price of a new torch, and often even more expensive. So this method can be immediately discarded.

It is possible to drill through concrete with an electric screwdriver this way, but it will be difficult. In fact, the main work will be done with the drill. In Soviet times, people made all the holes in concrete with a punching tool and did without any screwdrivers or drills. An electric screwdriver in this case only simplifies the work.

So again, I recommend that you get a torch. For example, on the website Alltools.The cheapest peorator you can buy for a ridiculous amount of money. You can make sure of it by clicking here.