Change The Line On The Stihl Trimmer

Automatic line winding to a spool

There is a type of reel in which the automatic mechanism winds itself. from the user it is enough only to correctly fill the line. The fishing line is passed through a hole on the inner part of the body, its antennae without winding are passed through the hole on the outer body, the reel is assembled, and when the winding button is rotated, the fishing line inside is wound independently. It is impossible to make the winding wrong in such a spool: the mechanism itself will determine the correct direction, since it can only spin in one direction.

We wind the fishing line

Slowly completed disassembly of the spool-spool without losing its spare parts allows you to proceed to the main task. winding the fishing line into the reel. Technological features of the spool design and the number of working antennae determine the sequence of actions.

How to insert line into the trimmer spool? Instruction

Change The Line On The Stihl Trimmer

The warranty production of the factory trimmer refueling will inevitably require line replacement. Having a very rough idea of ​​how to thread the line into the trimmer reel on their own, beginners are reluctant to take up this business. However, with some skills, mastering this simple teaching does not present any difficulties, and the similar instruction presented below will make this process as easy as possible.

Preliminary preparation

First of all, to wind the fishing line, you need to remove the spool (bobbin, spool) from the trimmer. specific actions will depend on the complexity of the configuration and the type of the product itself:

  • Small electric trimmers with a working position of the motor and the coil in the lower part, as a rule, have side buttons on both sides of the bobbin. When pressed at the same time, the upper part of the spool together with the inner content for winding the line is disconnected, while the lower part remains on the trimmer. It is advisable to disassemble the bobbin on a flat, smooth place so that the spring included in the structure does NOT jump out and does NOT get lost;
  • Electric and gasoline trimmers with a curved bar without the possibility of installing a knife, as a rule, have spools with special lamb: in such designs, hold the spool in a stationary position with one hand, and rotate the wing nut that fixes the Bobbin on the bar with the other hand. After disconnecting the nut, the entire bobbin is removed.
  • Electric and gasoline trimmers with the ability to install a knife on a straight Bar (for example, Stihl trimmers) have a hole under the reel. To keep the rod stationary, a screwdriver or other suitable object is inserted into this hole and, with slow rotation, such a mutual arrangement is achieved when the screwdriver enters the hole and the bobbin is fixed. After that, the coil body is scrolled clockwise (with a left-hand thread) and removed from the trimmer.

For the second and third options, the coils, depending on the design, are disassembled in different ways. In the bobbins, a lamb is unscrewed from the lamb, in the coils, the latches are pressed from the latch and one part of the coil is released from the other. If the halves of the bobbin are connected by thread, then it is enough to turn them by hand in opposite directions until they are completely unscrewed.

Coil with one working tendril

The simplest option and uncomplicated sequence of actions:

  • The dimensions of the reel and the length of the original factory winding determine the recommended length of the line for winding. 2. 5 m.
  • One end of the line is inserted into the fixing technological hole located inside the spool.
  • The fishing line is wound on the drum in the reverse rotation of the spool in the direction of the trimmer. as a rule, on the inside of the bobbin an arrow indicates in which direction the winding is being carried out.
  • A small section of the fishing line is left free to lead it out. it is fixed in a specialized groove on the inside of the bobbin, designed to hold the winding when assembling the bobbin into working condition.
  • The left end of the line is passed through the hole in the outer part of the reel.
  • The bobbin halves are assembled and put on the trimmer bar.

How to change line for gasoline trimmers

Coil with two working tendrils

In this type of spools, you should determine the number of grooves for winding the line, lying on the inside of the spool:

  • One groove. both tendrils are wound together in one groove;
  • Two grooves. each antenna is wound on an individual groove.

For both cases, a line with a length of 2-3 m is taken.In single-groove reels, the line is pulled into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the opposite direction of rotation of the bobbin on the rod side. inside the arrow usually indicates the correct direction of winding. If there are fixing grooves, the ends of the fishing line are threaded through them or held with the fingers of the free hand, they are threaded into the through hole of the outer half of the bobbin, the bobbin is closed and attached to the trimmer bar.

The difference in line winding in two-groove spools is that initially a 2-5 m long line segment is folded in half (to determine the mid-bend), and the bend loop is inserted into a special groove between the grooves. Both antennae of the fishing line are wound each along its own groove, fixing the antennae and assembling the coil is similar to the above-described option with one groove.

The first execution of this procedure, perhaps, will seem long and rather laborious, but with time and experience this task will be solved much faster and easier.

The following will clearly show how to thread the line into the trimmer spool and wind it correctly. this operation is NOT difficult and with some patience it will certainly be crowned with success:

How to change line to trimmer?

The trimmer is considered to be the simplest and most convenient device for cutting grass and other types of low vegetation. It should also be noted that it is this device that is in demand among consumers today. Let’s figure out today how to change the fishing line on it, and do it without outside help.

You now have a trimmer. this is great, because the device is inexpensive and at the same time very convenient and effective. Time passes, and if you used this unit all the time, then the line becomes unusable, which means it’s time to replace it. Taking it to specialized repair points is one of the options to change the fishing line, but why pay for it if you can carry out this process yourself.

The advantages of the trimmer are:

  • Very easy to maintain
  • Easy to operate, everyone can handle it
  • At a price. affordable, which means that everyone can buy it

So, in order for the trimmer to be effective. It is necessary to choose the right cutting type attachments or special heads. If the cutting attachment can be sharpened, then in the case of a fishing line, nothing of the kind can be done, it will only need to be changed.

It is worth noting that the fishing line tucked into the reel is called the cord and the part in question can be installed on a trimmer, which runs on electricity or on gasoline.

When you need to change the fishing line to a trimmer, you should start this process by disassembling the coil itself, you simply cannot do without this to achieve your goal. It turns out that first we shoot, and then we disassemble the coil to get to the line.

The mowing type head is NOT simple in design, it has several parts, namely, springs (this part may not be found in all models), a casing, a cover and a bobbin with fishing line.

If your unit is powered by electricity, before starting the disassembly process, it is imperative that you turn it off from the network. The mowing head can be attached to the trimmers in several ways, which will determine how the disassembly process will be carried out. So, we proceed to removing the trimmer head (you need to understand that complete disassembly will be required to carry out this process):

  • We are looking for clamps, which are located on both sides of the lid, press on them and remove the lid, which is a protective barrier for the head, which is located under it.
  • There is a spool under the cover, and it is this that needs to be removed. It should also be noted that some models are also equipped with a spring, which is located directly under the bobbin and if there is one, it should also be pulled out. Because it is small and you can lose it.
  • There is a screw under the bobbin, which can be unscrewed either with a Phillips or flat screwdriver (also depends on the model and manufacturer). Some models have a bolt instead of a screw, so keep that in mind. The screw or bolt will need to be Unscrewed.
  • After the fasteners are removed, we carefully grasp the housing and remove it from the gearbox shaft.

The second option for disassembling the head is useful if it is screwed directly onto the gear shaft. In order to remove the part in question, you will need to fix the shaft. A metal rod or a thin screwdriver is useful here:

  • We stick the twig into the hole and fix the shaft
  • After that, it is necessary, holding the head body, to scroll it, moreover, it is necessary to do it only clockwise, but not against it. You need to understand that the thread in this case is left-handed, and that is why scrolling should be carried out in the direction of.

Now let’s start winding a new line. First you need to choose the thickness and, of course, the length of the cordon, usually these parameters are selected depending on the model. Basically, you need to purchase a new line that is similar to the old one in all respects. If, for any reason, you are not satisfied with the parameters of the old one, then decide on your own and buy the one that, in your opinion, will be the best option.

You also need to understand that the thicker the fishing line you choose, the thicker the grass it can mow, but the diameter of the fishing line is considered a universal option in this case Corresponding to the size of 2 mm.

The acquired new line must be wound around the head, which is why the first stage of our process was its analysis. When the head is open and you are holding a new cord in your hands, we proceed to winding it:

  • First, we decide how much fishing line we need for winding. To do this, we wind the fishing line in such a way that it does not go beyond the reel itself.
  • Now we fill the line into the spool. for this we fold the line twice, and one end should be shorter than the second, by about 10 cm.
  • Since the bobbin itself consists of two parts, and the central side is the dividers, you need to find a groove on it, in which the fishing line will be inserted. It is worth noting that in order to carry out this process, you will need to make an effort.
  • The spool will indicate the direction of the line winding, so be careful. We wind it up carefully and take our time. Attaching one end, which is shorter, into the groove. Located on the side of the coil and in the other groove Attaching the other end.

Now we Install the coil head in place and fix all this in the reverse order. Your trimmer now has a new line to help you cut your grass quickly and easily.

Share this tip: “How do I swap line for a trimmer?”

# Spoiler # end_spoiler