Changing & Draining Your Walk Behind Lawn Mower s Oil. Craftsman lawn mower oil change

How To Change The Oil On A Craftsman 625 Series Lawn Mower?

To change the oil on your Craftsman 625, begin by placing the lawnmower on a surface that you do not mind spilling oil onto in the case of spilling some. First of all, you should remove any fuel which is already in the engine. The easiest way to do this is to simply allow the fuel to run out while you are using your lawnmower. For safety purposes you should disconnect the spark plugs. The oil drain plug for the Craftsman 625 series lawnmower is located on the bottom of the mower, just above the blade. Tip the mower back. The plug is round and threaded with a square head. Using the square head of a ratchet extension, twist the plug counter clockwise and remove. The oil will start draining out so place a container underneath it to collect the old oil. Once it has drained, replace the plug and tighten clockwise until snug. Replace with new lawnmower oil or SAE-30 weight oil. Many people forget how important it is that basic maintenance should be performed on a lawnmower at regular intervals. To keep the engine running in top condition, you need to change your lawn mower oil fairly often. It’s not a difficult process and only takes a few minutes to complete. Check with the manual how often you will need to change the oil and it will usually vary from between 25-50 hours of use. If you have recently bought a lawn mower, the oil needs to be changed after the first five to eight hours of use. This is to get rid of any metal shavings or debris that might have been left in your machine during manufacturing and assembly.Never tip your machine with the carburettor or spark plug down. The oil will saturate the air filter and cause hard starts or cause the mower not to start at all. If you do accidentally contaminate the air filter, it will need to be replaced. Drain the oil through the dipstick tube into a container. Allow sufficient time for all oil to drain. Dispose of the drained oil properly.

Here are some related questions which you might be interested in reading.

Checking your oil is one of the most important things that you can do to extend the life of your lawn mower engine. In this video, Pete will show you how to properly check the dipstick in a Honda lawn mower, but this process can be used for any rotary-style lawn mower.

Checking the Oil Level Using Your Dipstick

We also briefly touched on the subject of checking your fuel. You should always run fresh fuel in your mower to ensure that you're getting the most out of your engine. If you decide to run old fuel, please note that this could affect things later on, as the high content of ethanol in fuel attracts water which could damage your engine. Also, carburetors, fuel line and tanks tend to collect gunk that can slow fuel flow and cause your mower to stall or not start.

Draining the Oil Out of Your Lawn Mower

After the draining process is complete, you'll need to screw the dipstick back in and make sure that it is snug (again, not over tightening it). Then, tilt the mower back on all four wheels.

The Craftsman Lawn Mower Oil Capacity

The capacity of the oil in Craftsman lawnmowers differs based on the particular model and engine model.

The manufacturer’s or the owner’s handbook should be consulted to determine the precise quantity of oil required for your specific mower.

As a rule of thumb, generally speaking, Craftsman mowers equipped with a four-cycle engine will have an engine capacity of about 20 to 20 ounces (0.59 Liters).

However, this could differ greatly based on the engine’s size and model. Certain models might require greater or lesser oil, and it’s, therefore, essential to consult your owner’s manual to determine the recommended capacity for oil.

The oil that is not filled up or properly can cause damage to the engine or performance problems, therefore it is important to weigh the oil with care and then ensure that you are adding the proper amount.

Oil for the Craftsman lawnmower filter

The majority of Craftsman lawnmowers equipped with four-cycle engines come with an oil filter that helps filter out contaminants from the engine and to prevent damage to the engine.

The exact type and size of the filter could be different based on the model and the engine model. It’s essential to review the manual of the owner or call the manufacturer for the proper oil filter for your particular Craftsman mower.

If you change the oil it’s suggested to change the filter in order to ensure maximum engine performance and durability.

To replace the filter find the filter and employ an oil wrench to loosen it and take it off. Clean the surface of the mounting for the filter and place the new filter following the directions of the manufacturer.

Refilling the oil filter regularly and making sure you use the correct type of oil and capacity will help to keep the Craftsman lawn mower in good working order and help prevent expensive engine damage.

Choosing the Right Type of Oil for Your Craftsman Lawn Mower

When it comes to selecting the appropriate kind of engine oil to use with the Craftsman lawn mower a couple of important aspects to take into consideration.

SAE Viscosity Rating

The Society of Automotive Engineers (SAE) created an index for measuring oil viscosity.

The oil’s ease of movement at a certain temperature is indicated by the viscosity rating. For the majority of Craftsman lawnmowers, SAE 30 is the preferred viscosity rating for warmer conditions, whereas SAE 10W-30 is suggested for colder conditions.

Synthetic is different from. Conventional Oil

Another aspect to take into consideration when selecting grass mower oils is deciding whether you choose conventional or synthetic oil.

Synthetic oil is made for longer-lasting use and provides greater defense from abrasion and wear but it’s also more costly than conventional oils.

Conventional oil, on the contrary, is less expensive, however, it will require more frequent oil replacements.

Craftsman lawn mowers are made to work with conventional and synthetic oils, therefore it’s dependent on you. Synthetic oil is a great option if you want the best chance of protecting your automobile and have the extra money to spend on it.

If you’re on a lower budget and want to replace your oil more often conventional oil could be a better option.

Oil Additives

Certain lawn mower oils come with additives specifically specially designed to bring additional advantages. Some oils have detergents to help maintain the engine clear by getting rid of dirt and other debris.

Certain oils could also have anti-wear substances that help protect the engine from damage. Consider if you want to choose an oil with additives and what sort of additives you want before selecting a lawn mower oil.

How to Change Your Lawn Mower Oil

Changing the oil in your lawn mower is a fairly simple task that you can complete yourself with only a handful of basic tools. This is a step-by-step procedure:

  • Begin by operating your lawnmowers for a couple of minutes to warm the oil. Warmer oil flows better and drains out from the motor faster.
  • Switch off the mower, and remove your spark plug cable to stop the engine from starting accidentally when you’re working on it.
  • Find the drain plug for oil located on the underside of your engine. Install a drain pan under the plug to collect all the oil that has been leaking out.
  • Unplug the drain and let the oil be drained out completely.
  • When all the old oil has been drained out remove the drain plug, and then tighten it with a secure.
  • Take off the cap for oil fill and then add the required amount of new fuel to your engine. Make sure you apply the proper viscosity and the type of oil.
  • Replace the cap that fills with oil and clean up any oil that is left.
  • Connect with the ignition plug, and begin the engine. It should run for a couple of minutes to circulate the fresh oil.

Craftsman Lawn Mower Oil Type – What Type Is Safe to Use?

The right type of oil for your craftsman lawn mower is crucial for the performance and longevity of the engine. There are a number of oils on the market today, but which ones work best with your lawn mower?

What kind of oil should you use for a craftsman lawnmower?

Depending on the lawn mower engine and the climate condition of your region the most recommend craftsman lawnmower oil is SAE 10W-30 and It’s works 32 degree Fahrenheit. On the other hand, for the colder climates SAE 5W-30 is the most reliable oil that increases efficiency and mower performance as well.

Craftsman Lawn Mower Engine Oil Types

There are many types of oil that are available for Craftsman lawn mowers. So based on the specific types of engine we choose the based engine oil that increase mower efficiency and give the mower more power.

Briggs and Stratton Engine oOil

Does your Briggs and Stratton engine need a little more or a little less lubrication? Engine oil is a key component in the health of an engine, so finding the right type is essential. The best way to determine what’s best for your engine is to read over this article. We’ll tell you what the different grades are, how they can benefit your engine, and how often you should use them.

So based on the engine and climate temperature Briggs and Stratton recommend some oil that is increase mower more powerful.

  • Eliminate any frictions and add an extra protective coating for engine components.
  • It is made to improve fuel economy and boosts power output and performance.
  • Decrease engine deposits and exhaust emissions.

Kohler Lawn Mower Engine Oil

The Kohler Lawn Mower Engine is one of the most reliable engine available for residential use. One of the best features about this engine is that it has a cast iron cylinder, making it more durable than engines with aluminum cylinders. The Kohler Lawn Mower Engine also has a dual voltage starter, which allows for easier starting in hot climates, and an electric starter that eliminates the need to pull on a cord.

For this system, if the area temperature is average, you may use SAE 10W-30, but if the temperature is under 0 °F, we recommend rounding towards SAE5W-30.

Honda Lawn Mower Engine Oil

Honda engines are designed with the environment in mind, so they are more environmentally friendly than other brands. Honda’s engines have earned the EPA’s Ultra-Low Emission Vehicle (ULEV) designation. The Honda lawn mower engine is designed to be small and simple in size. The engine has a 4 stroke design which is quieter than 2 stroke engines. A 4 stroke engine also uses less gas than a 2 stroke engine, making this Honda lawn mower engine even more environmentally friendly.

Honda makes many types of engines, including the GX120 GX200 and GX160. These engines should be fed with SAE 10W-30 oil and operating in temperatures ranging from 0 to 100 degrees Fahrenheit. However, if you are looking for an oil that operates only in the summer and when the temperatures are above 50-60 degrees Fahrenheit, opt for SAE 30.

Why Lawn Mower Motor Oil is Important?

Most homeowners take very good care of their lawn mower, but after the machine has been put away for the season, many people forget to give it an oil change. Without engine lubrication, the motor will eventually seize up and stop running. The importance of proper engine maintenance goes beyond just remembering to change oil, as there are other vital parts that must be maintained in order to ensure that the cylinder head is not warped or cracked.

  • Stop the lawn mower engine and make sure that your engine is stand by on a flat surface.
  • Remove the dipstick cap and wipe up with a dry cloth
  • Now reinstall the dipstick and see the oil level.
  • If the oil level is end of dipstick then you need to pour up with the oil.

Can I use 10W30 instead of SAE 30 in my lawn mower?

No. We can’t.Generally SAE-30 is used for the lawn mower and on the other hand 10W30 is used for Vehicles and can also be lawn mower.

Desmond J. Hernandez

I'm a lawn mowing expert and gardening enthusiast. I started my own lawn care business in college and have been doing it ever since. I love taking care of lawns and gardens, and I'm always looking for new ways to improve my skills. I'm also a big fan of composting and using natural fertilizers.

How Often Should I Change My Lawn Mower Oil?

 

changing, draining, your, walk, lawn, mower

 

Facing equipment or project problem you can't find an answer to? We have you covered. Check out of frequently asked questions below, or contact us directly if you don't find an answer to your problem!

Q: How Often Should I Change My Lawn Mower Oil?

Taking proper care of your lawn mower will help your machine run well for years to come. One overlooked aspect in lawn mower maintenance is how frequent oil changes should take place. Engine oil and oil filters should be replaced at least once every spring or summer, or every 50 hours of use. whichever comes first.

Step One: Getting Started

Begin by starting your lawn mower’s engine to let it warm up for about 60 seconds. After turning off the engine, disconnect the spark plug wire to ensure your lawn mower doesn’t accidentally start while you’re working. With a towel or rag, clean old oil and dirt from the dip stick shaft and drain plug areas. Following clean-up, remove the dip stick.

Step Two: Draining the Oil

If you’re changing the oil on a push mower, begin by propping up the mower deck so the spark plug is facing up. Place the oil-safe container underneath the mower. With a socket wrench, unscrew the oil plug counterclockwise until oil can escape. Empty the oil from your mower into an oil-safe container.

Step Three: Replacing the Oil Filter

Begin by locating the oil filter on your lawn mower or tractor. Twist the oil filter counterclockwise to remove it. Inspect the seal of the oil filter for any dirt or debris and clean it off. Using new engine oil, lubricate the clean sealing gasket so that it appears clean. Once it appears clean and well-lubricated, place the new oil filter into the filter adapter and screw it back into place by hand. Using a wrench, tighten the oil filter.

Step Four: Refilling the Engine Oil

Without overfilling, pour the recommended amount of oil directly into the hole where the oil fill plug goes. Once your new oil is inside the lawnmower engine, replace the oil fill plug or dip stick. Wipe the dip stick clean before inserting it back into the dip stick shaft. Finally, pull the dip stick back out to make sure the oil level is correct.

Choose Stanley Son for all your outdoor power equipment repairs and maintenance. Schedule your lawn mower service with us today.

My lawn mower that a friend recently gave me wouldn't stay on today when I was trying to cut the grass after filling it with gas so I'm assuming it might need an oil change. Now because I've never been responsible for the maintenance of a lawnmower prior to now, I'm wondering if I have to drain the gas out first prior to tipping it over?

What about removing the drain plug from under the deck.

Many new mowers no longer have a drain plug under the deck unfortunately.

Funny I spent 10 minutes looking for a drain plug on my self propelled TORO, since my last lawnmower had one under the deck. Well I finally gave up and asked my brother for advice and he suggested exactly what is described in this article. The only drawback with this method is that oil tends to get in the combustion chamber resulting in a puff of smoke (pollution) the next time I start it.

Just want to point out that I hadn't changed the oil in 4 years since I bought it (don't know how I forgot as I am usually pretty good) and boy was the oil black and dirty. Had to flush it about 5 times (starting it between changes and letting it run for a minute or two) before the oil started to drain clear. I used synthetic oil as it's the only oil I use for all my 4 stroke combustion engines.

Warning

Contact an auto parts store for location of oil disposal facilities.

  • The Craftsman DYT 4000 riding lawnmower is a reliable mower for homeowners with larger yards to cut.
  • As with any other lawn equipment, changing the oil on a regular basis keeps the engine properly lubricated and helps to extend the life of the mower.
  • Raise the hood of the lawnmower.
  • Clean the area around the oil fill cap/dipstick with a rag.
  • Turn the oil fill cap/dipstick counter-clockwise and pull it off the engine.

Kenneth Crawford is a freelance writer with more than 10 years of experience. His work has appeared in both print and online publications, including "The American Chronicle." Crawford holds an associate degree in business administration from Commonwealth College.