Hilti hit re 500 chemical anchor consumption
FIND ANOTHER MANUFACTURER’S EQUIVALENT: CHEMICAL ANCHOR ANALOGUES LIST
For use in wet holes, in water-saturated concrete. Perfect for diamond holes with larger depths and diameters.
- Quality and reliability of the manufacturer Hilti speak for themselves!
- Hilti chemical anchors can withstand enormous loads. Makes it possible to install studs with a diameter greater than M24 and reinforcements!
- No stress in the concrete, which in turn reduces the spacing and edge distance
- Good flexibility
- Ideal for use in diamond drill holes. Makes it possible to use in wet holes thanks to its high adhesion. Has a long curing time, which in turn makes it possible to perform corrective work on the studs and installation in deep holes of large diameters
- Comfortable handling
- Easy to use. Requires little force during injection, thanks to the ergonomic dispenser. Unique packaging reduces construction waste.
- It does not emit a pungent odor, so you can safely work indoors and indoors.
- Easy to inspect studs and rebar already installed, thanks to the red color.
Consumption of Hilti chemical anchor (any)
In this document you can determine the exact amount (consumption) of any Hilti adhesive.
You will need to: download the document, open it in Excel, allow editing (if Excel prompts you).
Then you have to enter the diameters of the holes and the stud and the depth of the hole into the formulas. In the final formulas you get the volume (ml.) of the adhesive required per hole and per n-number, which you can also specify.
Arrangement of reinforcing releases with the help of chemical anchors “Hilti
The production of Hilti adhesive anchors is based on epoxy resin and urethane-methacrylate. This product is used to secure mounting and working fittings. The adhesive anchor is selected by calculation, taking into account the factors:
Reinforcement release technology with Hilti anchors is used in European countries and Hilti chemical anchoring products can be used for various construction and installation tasks.
Hilti chemical capsule anchors
This type of Hilti anchor adhesive is in the form of a capsule. Each capsule is designed for installation of one fastener element. The capsules themselves are represented by cylindrical containers filled with glue. It is a two-component compound that is mixed during installation.
Such products are marked with the HVU label, which indicates:
For example, if the product is marked HVU M14X100, this indicates a hole depth of 100 mm in the base and anchor stud mounting with M14 thread.
The company from Liechtenstein manufactures chemical anchors for a wide range of threads: from M8 to M39.
The process of installing a stud using such a capsule is roughly as follows:
- First, a hole of the desired diameter and depth is drilled in the base. The manufacturer advises to choose the diameter of drill bits for studs with threads from M8 to M16 by 2-3 mm more, for studs with threads from M20 to M39 by 3-4 mm more.
- Then it is necessary to clean the drilled hole from dust, using compressed air or any mechanical method.
- Next, it is necessary to insert the chemical capsule “Hilti” into the hole.
- After that, clockwise it is necessary to screw the pin into the hole (it will damage the capsule, due to which the components will be mixed and the mortar will begin to harden).
At a positive ambient temperature, the mortar will freeze completely in about 20-60 minutes. At temperatures around zero or below, it will take several hours to cure. For fastening of metal parts with high dynamic stresses we recommend using special HVU-TZ capsules.
Hilti Chemical Capsule Anchors
This type of Hilti anchor adhesive is presented in the form of a capsule. Each capsule is designed for the installation of one item of fasteners. The capsules themselves are represented by cylindrical containers filled with adhesive. This is a two-component compound that is mixed during installation.
Such products are marked HVU, which indicates:
For example, if the product is marked HVU M14X100, this indicates a hole depth of 100 mm in the base and the anchor stud mounting with M14 thread.
The Liechtenstein-based company manufactures chemical anchors for a wide range of threads: from M8 to M39.
The process of installing a stud using such a capsule is approximately as follows:
- First, a hole of the required diameter and depth is drilled into the base. The manufacturer advises to choose a drill diameter 2-3 mm larger for studs with threads from M8 to M16 and 3-4 mm larger for studs with threads from M20 to M39.
- The drilled hole must then be cleaned of dust using compressed air or any mechanical means.
- A Hilti chemical capsule has to be inserted into the hole.
- After that, it is necessary to screw the threaded rod clockwise into the hole (it will damage the capsule, due to which the components will mix and the mortar will begin to harden).
At a positive ambient temperature the solution will cure completely in about 20-60 minutes. At temperatures around zero or below it takes a few hours to cure. For the installation of metal products that experience serious dynamic loads during operation, it is recommended to use special HVU-TZ capsules.
Hilti injection anchor systems
Such chemical anchors are marked HIT, represented by a plastic cartridge with foil containers (in one. glue, in the second. the composition-curing agent). Hilti, a manufacturer from Liechtenstein, offers a choice of seven different products. This type of adhesive “Hilti” for anchors differs in the following characteristics:
- scope of use;
- adhesive component and hardener type;
- Cartridge volume (330 ml or 500 ml);
- allowable load on the stud.
The most widespread and reasonably priced glue HIT-MM-Plus (330 ml container costs about 700-1000 ml) is a good example from Liechtenstein. Two-component adhesive, made of urethane-methacrylate.
It is recommended for stud bolts with threads from M6 to M16. Installation is performed in the following types of substrates:
The most expensive type of product is glue HIT-RE-500-V3, which cost about 3000 It is used for installation of releases of bearing reinforcing elements of overlaps, foundations, stairs, columns. The adhesive is made on the basis of epoxy resin with additives, due to what it is able to hold reinforcement from 10 to 55 mm in diameter.
Features of HVU anchors:
Application
When using Hilti’s HIT-RE-100 concrete anchor adhesive, consumers can count on the following advantages of these products:
- Can be used indoors and outdoors with the base material regardless of its current condition (dried, moistened, filled with moisture, etc.п.).
- Wide range of accessories (metal brushes, electric dosing device, injection pistons).
- High level of efficiency for use in solid concrete bases without cracks.
- Long curing time, so that adjustments can be made during installation.
- Easy cleaning, which greatly simplifies installation.
per 330ml capacity.
Variety of HILTI anchors
The hybrid unique chemical composition of this class of anchors makes them irreplaceable in construction and furniture production, as well as in minor repairs of domestic appliances. For each type of application specific, most suitable and easy to use polymer formulations have been developed.
- Hilti HIT-RE 500 chemical anchors are used in damp environments, damp concrete, for support structures. These fasteners are indispensable for work in water.
- HILTI HIT- HI 70 are excellent for fastening parts to hollow (energy-saving) partition walls, aerated concrete and other loose materials.
- HFX is suitable for residential repair, appliance and plumbing fixtures. Extremely easy to apply, requires no special skills. Cures quickly, injects without dispenser and allows for short periods of distraction when needed. The hardening degree is monitored by color changes.
- HIT-ICE works perfectly even at lower temperatures.20 degrees Celsius. Can be dosed quickly and easily.
- HIT-RE 100 is a standard epoxy adhesive compound for anchors and rebars in concrete bases.
- HIT-HI 200-A is a uniquely developed hybrid adhesive for restoration of anchor joints and rebar penetrations in critical locations.
- HIT-MM PLUS. an inexpensive and reliable material for mounting in concrete and brick.
Rules and peculiarities of using anchors
- To work with anchoring devices designed for foam concrete and porous materials, a mesh sleeve is offered, which is placed in the hole drilled in the working base before bonding the parts. It is best drilled with a diamond tipped instrument to achieve a smooth and perfectly round surface. injection of resin from the tube through a plastic tube into the until the cavity is filled to two-thirds of its depth. Then a threaded rod is pressed in with a twist, to which the necessary part will be screwed later on. Once cured, the compound will provide a strong, reliable and durable connection of the elements to be fastened.
- In any case, the drilled holes should be cleaned of dust and blown out with compressed air beforehand.
- The capsule anchor is a glass ampoule filled with adhesive. One capsule is designed to hold one part. To be used in hard, dense structures. If this element is inserted into a prepared hole and hammered into it with force, the hardener leaks from the shattered container and reacts with the main adhesive. Not recommended for large volumes.
- To minimize the consumption of a mortar cartridge it is recommended to use a mortar injection calculator which takes into account the diameter of the stud, the depth of the hole and the number of parts to be fastened. This will considerably reduce mounting costs.
- It is not necessary to use non-professional devices, such as pharmacy enemas, for hole cleaning. Also, cavities must not be washed with water because this will unnecessarily increase the curing time and weaken the setting effect by up to 80 percent.
In loose environments, poor accessibility, low temperatures and high humidity, right up to work in water, Hilti is definitely superior to all available analogues of metal fasteners in terms of quality and reliability. Storing and transporting capsules and tubes does not involve any inconvenience. Opened container with adhesive can be stored for up to one year after initial use. Simply close it tightly. Lime-sand blocks and cellular concrete products are beyond the reach of metal dowels without the use of special labor-intensive technologies, while the use of a chemical anchor can quickly and efficiently solve the problem.
Under rapid changes of temperature conditions the chemical compounds do not create a compressive or expanding effect, which is an additional guarantee of reliability of the connection.
The disadvantages include a relatively high cost, a short shelf life (up to one year) and a long curing period.
Rules and peculiarities of using anchors
- To work with fasteners designed for foam concrete and porous materials, a mesh sleeve, which is placed in the hole drilled in the working base before bonding parts. It is better to drill with a tool with a diamond tip to get an even and perfectly round surface. The binding agent is injected into the sleeve from the tube through a plastic tube until the cavity is filled to two-thirds of its depth. Then the threaded rod is pressed in with a twist, to which the necessary part will be screwed later on. After full curing, the composition will provide a strong, durable and reliable connection of the elements to be fastened.
- In any case, the drilled holes should be cleaned of dust and blown with compressed air beforehand.
- A capsule anchor is a glass ampoule filled with adhesive. One capsule is designed to hold one part. Applicable for mounting in hard, dense structures. If such an element is inserted into the prepared hole and the required stud is hammered there with force, the hardener flows out of the broken container and reacts with the main gluing substance. Not recommended for use in filling large volumes.
- For economical consumption of the contents of the cartridge with the mixture it is recommended to use a calculator of the required amount of injection mass, which takes into account the diameter of the stud, the depth of the hole and the number of parts to be reinforced. Will greatly reduce installation costs.
- Do not use non-professional devices, such as pharmacy enemas, to clean holes. Also the cavities must not be washed with water, because this would unnecessarily increase the curing time and weaken the setting effect by up to 80 percent.
In loose environments, poor accessibility, low temperatures and high humidity, up to work in water, Hilti is certainly superior in quality and reliability to all available analogues of metal anchoring devices. Storing and transporting capsules and tubes does not involve any inconvenience. An open container of adhesive can be stored for up to one year after initial use. You just need to close it tightly. Lime-sand blocks and cellular concrete products are beyond the reach of metal dowels without special labor-intensive technology, while the use of a chemical anchor can quickly and effectively solve the problem.
Under sudden changes in temperature conditions, chemical compounds do not create a compressive or expanding effect, which is an additional guarantee of connection reliability.
The disadvantages are its relatively high price, short shelf life (up to one year) and long curing period.
Comparison of properties of BIT-500 and HIT-PE 500
High-performance two-component chemical formulation for anchorages based on synthetic, solvent-free, high molecular weight epoxy resin. Basically differs from other types of chemical anchors by the fact that by mixing the components in equal proportions (3:1) and the following curing it forms a high-molecular compound, the so-called “cross-linked polymer”, which surpasses all compositions for chemical anchors in its physical and mechanical properties. Characterized by a considerably longer curing time, which makes the compound easy to apply to great depths and fills large holes.Description
Purpose and area of application
Specially designed for high-reliability anchoring in the compressed and stretched zone of concrete under high operational loads (including dynamic and seismic effects). Certified for mounting in the bottom edge of the horizontal surfaces (in the ceiling). No shrinkage damage allows large diameter rebar, tie rod and foundation bolt applications in openings with large annular clearances. Specially designed for use in diamond drill holes with smooth, ground interior surfaces. It is used for installation of embedded anchors and foundation bolts of large diameters, fastening of industrial equipment, organization of reinforcement outputs in monolithic construction and reconstruction of industrial buildings and structures, airports, sea and river ports, transport infrastructure, energy and military facilities.
Different types of HILTI anchors
The hybrid unique chemistry of this class of anchor makes it indispensable in construction, furniture production, and for minor repairs on household appliances. For each type of application specific, most suitable and easy to use polymer formulations have been developed.
- Hilti HIT-RE 500 chemical anchors are used in damp environments, damp concrete, when installing load-bearing structures. These fasteners are indispensable for work in water.
- HILTI HIT- HI 70 is excellent for fixing parts to hollow (energy-saving) partition walls, aerated concrete and other loose materials.
- HFX is suitable for residential repair, appliance and plumbing fixtures. Extremely easy to apply, requires no special skills. Cures quickly, can be injected without dispenser and permits short periods of distraction if required. The curing degree is monitored by color changes.
- HIT-ICE works perfectly even at lower temperatures.20 degrees Celsius. Dispenses quickly and easily.
- HIT-RE 100 is a standard epoxy adhesive compound used for fastening anchors and rebar in concrete substrates.
- HIT-HI 200-A. a unique development of hybrid adhesive for restoration of anchor joints and reinforcement gaps in critical locations.
- HIT-MM PLUS. inexpensive and reliable material for installation in concrete and masonry.
Special terms
Suitability к of operation. ability of the (anchoring) product to comply with its intended use and ensure its designed service life.
Lifetime service. is the period of time during which the performance of the product (anchoring) is maintained at an appropriate operating level, t.е. At a level appropriate to their intended use.
Longevity. The ability of a product (anchor) to provide the specified service life of the anchorage (subject to appropriate maintenance).
Reinforcement release, embedded в reinforced concrete. reinforcing bar, embedded in any construction of a building or structure and designed to ensure the joint operation of existing and newly built reinforced concrete structures.
Reinforcement fixing element includes:
