Cutter on t 25 with his hands

Algorithm of assembling a self-made milling machine

cutter, hands

Fixing the working shaft to the base frame (be sure to use bearings of the opposing type). For making the shaft you can use metal pipe, which diameter does not exceed 5 cm.

How to make a tiller with your own hands

I want to make a homemade milling machine for t-25. Please advise which spare parts will fit better for the burr.

LEONID (Perlie) I have an axle from a Moskvich 412. Can be assembled from it?

(Mandita) You can try to cut the pins and weld a crimp under the blades directly on the axle. It is possible to use an angle reducer.

LEONID (Perlie) I’m afraid the half axles will be weak, and one axis turns forward and the other backward. How to combine them into one side of the rotation?

grandfather (Mandita) satylites throw out the planter for wedge.

Sergey (Balderik) look at youtube type somodelnye soil tillers

LEONID (Perlie) I can’t find spare parts for the side gearbox. And if you put the gearbox from the mole will hold a heavy land?

Tatyana Bukhalova (Kokuyeva) My husband made from the rear axle of a Moskvich You can do Zhiguli and Volga.

LEONID (Perlie) Tatyana, did your husband make a cutter on the axle with a chain or gearbox? There are photos?

Tatiana Bukhalova (Kokuyeva) Leonid, I do not understand anything myself I will ask you everything and I will write you.

Sergei (Balderik) I also want to make a cutter, from the bridge.in short, weld the diff.instead of wheels, you should weld sprockets like a chain drive to a half-meter shaft or a tube with the same sprockets, and attach blades to this tube. Just saw it on the farmer.I think Petrovich did it there, he also welded springs instead of blades.

Grandpa (Mandita) I used to have a chain with a double row 25 on the right side of the jail I had to change 3 times, then I made a reducer is beautiful.

Sergey (Balderik) I agree, the gearbox is certainly better, and the chain must have been open? And if you put it in a case, although the chain is the easiest and most accessible option.You need to look for a suitable gearbox.

Ivan (Telfor) I’m building myself a gearbox from Kpi 2.4 and a chain of 25 on one side. but you can do it off the axle, but it’s a diff. Don’t weld it. It will not live long, just do both sides of the drive sprockets. It would be more reliable.

Ivan (Telfor) I’m building myself a gearbox from Kpi 2.4 Shaft from Donov corn reaper, trimmed to 1.How to make a cutter with your own hands on a tractor? 2 M axle can be not welded diff, and put on both sides of the sprocket and the chain 2

Grandpa (Mandita) The chain was closed and in nigro. It will not withstand the impact force of the blades on the ground. It would be better to work with burrs in tillage, but people are saving for winter and not plowing in spring. That’s why the chain does not hold.

Sergei (Balderik) HAVE TO DO WITH A THREE-WAY RUN MUFFLED

Tags: How to make a cutter with their own hands to the tractor

The cabin with their own hands

For the manufacture of the frame cab is the best material is a profile tube, which is attached to the seal for glass. The size of the molding for the glass is determined by the size of the cabin and the thickness of the seal. As a template it is best to use sheets of chipboard, which will most accurately match the required size.

To fix the seals use thin steel strips that are welded to the frame racks of the cabin. The structure of the cabin is welded separately, in parts, and then assembled into a single structure. Corner beams must be of strong material, which is not subject to deformation due to shocks. After welding the body of the cab, you can start cutting out the windows and glazing itself. To install the heater it is necessary to additionally insulate and seal the tractor cabin.

The heater on the tractor

Air heating in the T-25 cab is done by many amateurs. The main heater will serve as a cooling fan from which the cabin is conducted to the tube, which will pump warm air. It is important to insulate the tube with sealant at both ends, so that the efficiency of the homemade stove increases. This will prevent exhaust fumes from entering the cab. The on/off function can be adjusted by installing a damper from any passenger car furnace.

Features of minitractor tiller application

We have already said that a tiller can replace three devices at once. Here’s a list of these devices with the functions they perform:

триммер на трактор т 25 своими руками часть 2 /trimmer on the tractor t 25 with his hands part 2

Each tool has its own advantages, despite being similar in purpose. A tiller for a mini-tractor, assembled by your own hands, performs the same functions, but much more effectively. Depending on the implement, it turns the soil around or just makes it looser, helping to apply fertiliser evenly and deeply and to penetrate deep into the soil.

In other words, a tiller is a mechanized analog of a shovel. It loosens the ground well, ensures the proper application and distribution of fertilisers and stops or delays the growth of weeds. At the same time, it allows you to get rid of large stones, lifting them to the surface. they only need to collect and throw away

Why use a tiller?

We’ve already said that a tiller can replace three implements at once. Here’s a list of these devices with the functions they perform:

Each device has its own advantages, despite the similarity in purpose. The minitractor cutter assembled by your own hands performs the same functions, but much more effectively. Depending on the device, it provides a turnover of the soil or simply makes it more loose, contributing to an even and deep application of fertilizers and moisture penetration into the deeper layers of soil.

In other words. it is the mechanized equivalent of a shovel. They loosen the soil well, ensure the proper application and distribution of fertilisers and stop or slow down the growth of weeds. At the same time, it allows you to get rid of large stones, lifting them to the surface. they only need to collect and throw away

Soil tiller with their own hands: 8 photos and drawings of self-made

Tractor tiller made by our own hands is an excellent helper in home or farming. You can use it to level the ground, mix soil evenly, or mix it with fertilizer. You can also loosen the soil or weed out a pesky weed. A power tiller consists of a shaft, curved blades, a frame on which the blades are mounted, and a gearbox with a hood. Why not make life a little easier, especially in heavy soil or overgrown fields, by making a power tiller?

There are several types of tiller blades. Curved blades are the most common and wear-resistant.

The second type of blades for a tiller is the so-called “legs”, but they are very brittle.

The model in the photo works perfectly at 5 km/h.

To make the construction, it is enough to have skills with a welder, a drill, an angle grinder and various fittings.

This cutter variant is perfect for sowing fields.

Parts that are in close proximity to one another should be lubricated with grease or machine oil.

Where can I buy a tractor tiller?

Many Russian and foreign companies are engaged in production of milling machines for tractors. Generally, the range of tractor attachments is wide enough to meet the needs of any farm, whether a private farm or a large agricultural holding. For a T 25 tractor, it would be optimal to buy a tiller with a working width of 1.4 m. 36 blades provide high-quality soil cultivation and effectively crush weeds.

For a large farm, the amount is quite manageable, but for a small farm, it is a significant investment. In this case, you can make a tiller yourself, especially most of the tools and materials are usually at the owner’s fingertips.

Where can I buy a tiller for my tractor?

Many Russian and foreign companies are engaged in production of milling machines for tractors. In general, the range of tractor attachments is wide enough to meet the needs of any farm, whether it is a private farm or a large agricultural holding. For the tractor T 25 will be optimal to buy a cutter with a working width of 1.4 m. 36 blades provide high-quality soil cultivation and grind weeds effectively.

The amount is affordable for a large farm, but for a small farm it is a significant investment. In this case, you can make a mill yourself, especially most of the tools and materials are usually at the owner’s fingertips.

Tillage milling complexes aggregated with MTZ tractors

Multifunctional tractor machinery produced by MTZ-Holding is successfully applied for milling of field soils with the help of milling tillage units of different types, characteristics of which are given below.

Field milling and cultivating complex KFG-3,6

KFG-3,6 complex aggregated with tractor tractors of the third level is designed for post-tillage soil crushing in the areas with high salt content as well as for subsurface loosening of the fallow lands.

Equipped with a working milling drum mounted on a rotating shaft with L-shaped knives, driven by the power take-off of the base chassis, the unit weighing 1.320 tons and measuring 6.845×3.90×2.860 per hour, cultivates up to 3.24 hectares of land up to 0.1 m in depth and travels at up to 7 km per hour.

Operational and technical characteristics of KFG-3,6
Working Area Front Size (m) 3,6
Drum diameter at knife ends (m) 1,690
Number of cutter drum knives (pcs.) 108
Milling drum speed (rpm) 10
Ground clearance (m) 0,28

FPSh-200 tillage milling garden unit

Tillage tillage device FPSH-200 designed to work with BELARUS 50/52/80/82 and its analogues is used for tillage of inter-row areas in vineyards, bushes and orchards and for presowing of land for planting vegetables.

Equipped with the eight-section 0,55 m diameter rotor, the mechanisms of lateral movement of the boom and the arrow-shaped tines, the unit cultivates up to 12 hectares of land in one hour, loosening the soil to a depth of 0.06 to 0.15 m and removing weeds at the same time and travelling at 3 to 6 km per hour.

Operated by a tractor operator, weighing 0.66 tons and measuring 1.535×3.630×1.20 meters, the unit is designed for transport at a speed of up to 15 km per hour.

FPSh-200 Performance Characteristics
Front working area (m) 1,45/1,75/1,85
Number of knives in rotor (pos.) 8
Limit of left/right axis deviation (m) from base chassis longitudinal axis 1,570/1,350
ground clearance (m) 0,4

MT-1,8 milling greenhouse complex

MT-1,8 milling unit aggregated with 0,6-0,9 tractor tractors is used for soil preparation during planting of vegetable crops with simultaneous embedding of fertilizers preliminary scattered on the ground surface.

Working elements, rotating in the same direction as the wheels of the base machine, mounted on a tubular shaft driven by the PTO of the base chassis, allows the unit to cultivate up to 0,107 hectares of agricultural land per hour, cultivating the soil to a depth of 0,15 m at a speed of up to 2.25 km per hour.

Operator operated undercarriage unit weighing 0.350 tons and measuring 1.10×2.10×0.95 meters is easily moved into transport position and can be transported up to 10 km per hour.

Operational parameters FT-1,8
Fuel consumption of the base machine when cultivating 1 hectare of land (kg) 11,68
% of breakable clods up to 10 mm / more than 50 mm in size 75/5

Unified forestry cutter FL-08

Designed to prepare forested areas with no more than 600 stumps per hectare for young forest planting and firebreaks, the FL-08 is designed to work with Class 3 tractor tractors.

Outfitted with seven discs fixed on a rotating shaft with four pairs of double-sided knives, milling drum 0.64 m in diameter, weighing 0.75 tons, operates on an area of 2.5 to 3.5 hectares per hour, working the soil to a depth of 0.16 m at a speed of 3.6 to 4.5 km per hour.

Performance characteristics of FL-08
Work area frontage (m) 0,8
Milling drum speed (rpm) 240
Adjustable working depth range (m) 0,12-0,16