DIY McLane Grass Catcher. Reel mower grass catcher

Fiskars StaySharp 18” Max Reel Mower: Product Review

Depending on the size of your yard, this reel mower could replace your gasoline or battery-powered mower.

When asked to review the new Fiskars StaySharp Max Reel Mower, nostalgia set in. My paternal grandfather, who passed away months before I was born, used an old reel mower to cut his small patch of grass at his Chicago home. Oftentimes as a kid, I would cut grandma’s grass using that old, rusty mower. I remember having to run as I pushed it in order to get enough momentum to get it moving.

I wondered if the new Fiskars StaySharp Max Reel Mower offered an improvement over that reel mower from my childhood that was likely already 50 years old when I first touched it. I decided to find out.

SPECIFICATIONS

The box arrived a few days after placing the order – just as the spring rains set in. I let the box sit there unopened for a couple of weeks. Why get all excited about a new toy when I can’t play with it yet? I figured.

Eventually, the sun came out again, and I ripped open the cardboard box. Nestled securely in the box, I found my mower in a box inside a box.

mclane, grass, catcher, reel

Nice packing kept the mower secure in shipping.

Out-of-the-Box

When I got everything out of the box, my first thought was, Is this it? Is something missing? I guess I’m a little conditioned in this day and age to look for battery packs, wires, or at least a long, incomprehensible instruction manual confirming that we’re in some sort of space-age for tools. So in the case of the Fiskars reel mower, everything looked unimpressively low-tech.

mclane, grass, catcher, reel

Taking the materials out of the box, I could almost smell the grass I’d soon be cutting.

Not surprisingly, the contents required some assembly. What was surprising, though, was how quickly the unit went from pieces to ready-to-roll.

mclane, grass, catcher, reel

I love reading books, not manuals. The easy-to-follow pictorial instructions made things simple.

mclane, grass, catcher, reel

I lined things up on the ground to match the picture, and then tightened a few screws to assemble the handle.

Within 5 minutes, I had the handle together. And that included a quick bathroom break.

mclane, grass, catcher, reel

The handle parts came together by tightening a couple of nuts and bolts.

Next, you’ll find a cotter pin on either side of the frame. The bottom of the handle where it meets the frame comes with four holes that allow you to customize the height of the mower for your height. At around 6′ tall, the hole marked 4 put the handle at a natural height for me.

mclane, grass, catcher, reel

Attach the handle to either side of the mower frame via matching cotter pin; choose from 4 different slots based on your height.

The final assembly step is to screw the cutting height adjustment knob in place. This knob allows for one-hand cutting height adjustment.

mclane, grass, catcher, reel

Screw the orange cutting height adjustment knob in place, and you are ready to cut.

Safety First

Safety begins before you lose a finger or a toe. Thanks to frivolous lawsuits, I was not surprised to see warnings like “Never place hands, fingers or feet in the reel when it’s spinning.” My dad, who was no lawyer, would have said something like, “Go ahead and stick your hand in there. But I guarantee you that you won’t do it twice.” Just the same, keep anything you don’t wish to see cut severely out of the spinning blades. It should go without saying, but don’t throw stuff in it while it’s moving, because the spinning blades move quickly enough to turn pinecones and twigs into missiles. And, as recommended for most yard and garden equipment, always wear safety glasses (like these), gloves, and closed-toe shoes when operating and maintaining the tool.

Clippings Direction Control – The Fiskars reel mower comes with a grass chute of sorts that allows you to put the grass in front of or behind the mower.

mclane, grass, catcher, reel

To direct clippings back in front of the blades, tip the chute all the way to the rear position.

mclane, grass, catcher, reel

To direct the clippings down in front of your feet, slide the chute to the forward position.

Grass Clippings Bag – There’s also an optional grass catcher that can be purchased separately. Unlike a traditional grass clippings bag, this one sits on the front of the mower and is open on top. The benefit is that you can easily see when it’s full (it holds a half bushel of grass clippings), but it’s more difficult to see where you’re going because the bag sticks out in front of the wheels.

The bag is simple to attach to the mower (it just hooks on) – the built-in handle makes this even easier. It’s made of UV- and mildew-resistant polyester mesh fabric stretched over a heavy-duty steel frame.

mclane, grass, catcher, reel

The optional grass catcher is easy to install and empty

IT LOOKS GOOD. BUT CAN IT CUT?

It really does look good. I have never owned a Fiskars product that I would call cheap, tinny, or basic. This unit looks really good. Fit and finish are words usually applied to high-end automobiles manufactured with precision engineering. On that score, the Fiskars StaySharp Max Reel Mower is more Ferrari than Ford Fiesta.

mclane, grass, catcher, reel

Like all Fiskars products I’ve used, the fit and finish of this mower were highly refined.

But unless you’re a supermodel, you don’t get paid to look good: you have to actually do something. So how does the Fiskars do at cutting grass?

First, let me describe the size and shape of my yard. I mow about ½ acre. This area includes a couple of large straight flats and more than a few curved landscaped and treed areas that look like kidney beans.

Second, I should mention my grass. Many years ago, someone accidentally planted fescue, because no matter how much the crabgrass, Bermuda grass, clover and assorted weeds try to choke it out, I still see a few blades of actual grass cropping up from time to time. In other words, I’m not picky about what grows in my yard, as long as it’s greenish. That means I’m cutting a wide variety of greens that grow where you might expect to find a lawn.

So I tried the Fiskars Reel Mower in two tests on my varied greenish lawn: one, cutting straight and flat; two, cutting around the curves and contours of the landscaping.

DIY McLane Grass Catcher

Seeing as how every replacement part of McLane reel mowers cost 10x more than what most of us pay for them, I am not willing to spend 150 on a grass catcher for a mower that I got for free. so I am thinking about making my own.

I was thinking about cutting up a rubbermaid tote of some sort that is the same width as my reel, or bending some thin sheet metal (I have seen pics of very old McLanes with metal catchers).

Has anyone done something like this before or is it best to look for a scrap mower with a catcher and buy the whole thing?

quadmasta

The OEM catcher kind of sucks if you’re mowing 3/4″ or lower and you’re using a roller on the front; it either rubs constantly on the roller or you tilt it back and any bump you hit knocks it off. I think the problem you’d have making it out of a rubbermaid tote is that as soon as you cut part of that lip at the top away the thing turns into a wet lasagna noodle.

You could look on craigslist for a used top toolbox, gut it and use that and probably have far better results.

Groundskeeper Willie

Funny you should mention. I’d noticed the batshizzy price for a replacement McLane grass catcher too. Thought I must be dreaming! So i did this for my 17″ McLane push mower:

mclane, grass, catcher, reel

It’s a catcher for a Fiskars 18″ Stay Sharp Max. The lower hooks looked like they might fit on the front of the McLane, and.lo!- they did. I secured the upper hooks of the catcher with hardware from a car battery hold down kit that I happened to have lying around. 26 incl. Amazon Prime free shipping vs. 135 for the OEM replacement catcher from McLane. yeah I think I stick with this even though it says “Fiskars” on the front. I can always spray paint that white lettering out if it bothers me. The battery hooks work better turned around from the way I have them here in the picture and I put a couple of 7/8″ collar clamps on the cross bar for the lower hooks, but they’re probably not really doing anything much. It works as good as I need it to.

In thinking about this particular mower and about grass catchers in general, I stumbled across the metalworking technique of rod bending. The supports of the stock McLane grass catcher are connected to the catcher by bent rods. As it happened, I ended up using a pair of bent rod battery hold down pieces with the Fiskars catcher as I had the hooks in a tool chest and they basically fit the mower. The least expensive rod bending gizmos I can find are around 65 on ebay, and about 25 more at Harbor Freight, and maybe I’ll go that route eventually. Rather than submit to McLane‘s outrageous pricing, I’ll learn how to fabricate metal hooks. I’ll buy the tool to do the job myself; because you still have the tool and have acquired the basic skill long after the immediate need/task is fulfilled. So it’s like an investment in oneself, right? Some opinionated people.wives for example, or therapists, or Marie Kondo- might say that’s just a rationale, just a flimsy excuse to fill the garage with more junk like a common hoarder. But what do they know? it might actually prove to be a valuable tool and skill that pays off over the years. You just don’t know when it will pay off.

mclane, grass, catcher, reel

rjw0283

Funny you should mention. I’d noticed the batshizzy price for a replacement McLane grass catcher too. Thought I must be dreaming! So i did this for my 17″ McLane push mower:

mclane, grass, catcher, reel

It’s a catcher for a Fiskars 18″ Stay Sharp Max. The lower hooks looked like they might fit on the front of the McLane, and.lo!- they did. I secured the upper hooks of the catcher with hardware from a car battery hold down kit that I happened to have lying around. 26 incl. Amazon Prime free shipping vs. 135 for the OEM replacement catcher from McLane. yeah I think I stick with this even though it says “Fiskars” on the front. I can always spray paint that white lettering out if it bothers me. The battery hooks work better turned around from the way I have them here in the picture and I put a couple of 7/8″ collar clamps on the cross bar for the lower hooks, but they’re probably not really doing anything much. It works as good as I need it to.

In thinking about this particular mower and about grass catchers in general, I stumbled across the metalworking technique of rod bending. The supports of the stock McLane grass catcher are connected to the catcher by bent rods. As it happened, I ended up using a pair of bent rod battery hold down pieces withI the Fiskars catcher as I had the hooks in a tool chest and they basically fit the mower. The least expensive rod bending gizmos I can find are around 65 on ebay, and about 25 more at Harbor Freight, and maybe I’ll go that route eventually. Rather than submit to McLane‘s outrageous pricing, I’ll learn how to fabricate metal hooks. I’ll buy the tool to do the job myself; because you still have the tool and have acquired the basic skill long after the immediate need/task is fulfilled. So it’s like an investment in oneself, right? Some opinionated people.wives for example, or therapists, or Marie Kondo- might say that’s just a rationale, just a flimsy excuse to fill the garage with more junk like a common hoarder. But what do they know? it might actually prove to be a valuable tool and skill that pays off over the years. You just don’t know when it will pay off.

I like your attitude! I justify all the special tools I own based on how much it would cost for someone to do the work for me. That is how I ended up with all my air conditioner tools, I installed a mini split in my garage and ended up buying all the special tools for FAR FAR way less than they quoted for an install. I’ve acquired a lot of specialized crap over the years using this logic, but HEYYY, I am a more capable dude because of it!! Chains saws, to ethernet crimpers, to coax cable crimpers and everything else they rip you off for.

Greenworks 16-Inch Reel Lawn Mower with Grass Catcher

mclane, grass, catcher, reel

mclane, grass, catcher, reel

mclane, grass, catcher, reel

mclane, grass, catcher, reel

mclane, grass, catcher, reel

Specifications:

“1”=1, “faqtitle”=”Can I use my Greenworks mower on hills and slopes?”, “faqdesc”=”Walk behind mower units should not be operated on slopes greater than 15 degrees. This is not a limitation of the unit, but rather to ensure safe footing for the user. When mowing on a hill remember to mow across rather than up and down.”, “2”=2, “faqtitle”=”What maintenance is required for my Greenworks mower?”, “faqdesc”=”Greenworks mower units require much less maintenance than a traditional gas unit. However, It will still require routine seasonal maintenance. After each use we advise emptying the bag (if bagging has been used), then check/clean off debris on the side discharge, rear slot, clean the underside of the deck with a cloth and wipe the unit down. If there is harder debris stuck to the underside, you may want to use a rubber deck scraper. Make sure to check the unit for loose nuts and bolts after use and secure if needed. Do not expose this unit to water. Check the blade for any damage/dullness and replace or sharpen as needed. Store the unit in a cool/covered and dry location such as garage or shed.”, “93”=93, “faqtitle”=”When should I cut my grass?”, “faqdesc”=”Here are some mowing tips that may be helpful:\n Mow when grass is dry. Mow no more than 1/3 of the length of grass at a time. \n Mow in the morning or late afternoon to reduce the heat stress on the newly cut grass. \n Alternate mowing patterns each time you mow. As grass develops a grain based on your cutting direction it will lean towards the direction of your mowing path. Changing the pattern allows better vertical growth and helps to keep the cut neater. \n Consider mulching. To mulch, remove the bag and insert the mulch plug into the rear of the unit. This will leave the clippings on the lawn allowing the nutrients and nitrogen contained within them to return to the soil and allow the remaining grass to recycle them (always discharge the mulch towards a previously cut area to prevent your mower from bogging down). \n Leave grass a little higher in shaded areas. This keeps them healthy in relatively nutrient poor conditions. \n Always keep in mind what conditions your variety of grass prefers. If your grass prefers cooler climates, reduce the frequency with which you mow and increase the cutting height of your mower during hot seasons to compensate for the reduced growth rate these varieties may experience in this type of weather.”, “95”=95, “faqtitle”=”Do I always need to use my self-propelled feature when operating a self-propelled mower?”, “faqdesc”=”No, you do not have to engage the self-propelled feature to operate a self-propelled unit. There are two separate motors. Familiarize yourself with the self-propelled feature and the cutting feature of your unit (instruction inside the manual). Once you understand these two features you can engage the blade without using the self-propelled feature.”, “97”=97, “faqtitle”=”Can my Greenworks mower cut up pinecones, branches, twigs, and other yard debris laying on my lawn?”, “faqdesc”=”Greenworks mower are designed for grass, weeds, and foliage. It would not be advisable to depend on the mower to mulch any other types of debris. Before operation please thoroughly inspect the area where the mower is to be used. Remove all stones, sticks, wire, toys, and other objects that could be tripped over or thrown by the blade. Thrown objects can cause serious personal injury.”, “99”=99, “faqtitle”=”Can I use my mower in wet conditions such as rain?”, “faqdesc”=”For safety reasons (which can be found inside your owner’s manual under safety information) we advise not using the mower in wet conditions as unstable footing could cause operators to slip, causing a potential hazard.\n\n60V X-RANGE line which features IPX4 weather-resistant construction and can be safely used in damp conditions. Be mindful of your footing during use in potentially slippery conditions. “, “102”=102, “faqtitle”=”What does SmartCut ean?”, “faqdesc”=”The SmartCut feature, also considered a Power Save feature, is designed to maximize run time and battery life by automatically detecting the length of grass and adjusting its power or throttle up when needed. With this feature, the rotational speed of the blades will not always stay the same. They will spin faster automatically when you hit thicker grass.”, “103”=103, “faqtitle”=”Does my Greenworks mower unit require gas or oil?”, “faqdesc”=”No, gas and oil are not required for the operation our units. Greenworks mowers are either battery operated or corded (extension cord sold separately). This information can be seen on the product page of each tool and inside the owner’s manual.”, “104”=104, “faqtitle”=”Is the battery from my Greenworks mower interchangeable with the other units?”, “faqdesc”=”Greenworks offers a variety of different voltage lines for a wide range of individual residential needs. For example, we offer: 24v, 40v, 60v and 80v. Each voltage line has their own set of interchangeable tools and batteries but are not interchangeable across different voltage lines. To see compatible tools within each voltage line select shop by platform on our site.\nIf you’re still unsure if your unit is compatible, please contact us at info@greenworkstools.com for further assistance. We’re happy to help”, “108”=108, “faqtitle”=”How do I start my mower unit?”, “faqdesc”=”For corded units, ensure you have the correct extension cord (reference the owner’s manual) and power from your outlet. If you’re using a battery unit, ensure the battery has a full/adequate charge.\n\nMake sure you are starting the unit in the following order, or it will not start:\n1. Push down the safety switch button, while pressing the safety switch button with one hand, use your other hand to simultaneously pull the bale switch towards you. \n2. Once the machine turns on you can let go of the safety button and continue to hold the bale (lever) handle. \n3. The unit will only start when the safety button is pressed first, followed by the bale switch. If it is reversed the unit will not power on.\n\nFor some of our EZ Fold units the start sequence will not affect the unit. Use the correct batteries according to the unit and ensure the batteries have adequate charge, you can either push the button first or pull up the handle. These models are not affected by the start order. However, please always refer to your owner’s manual for verification on the starting process as this would be the most accurate source of information.”

What maintenance is required for my Greenworks mower?

Greenworks mower units require much less maintenance than a traditional gas unit. However, It will still require routine seasonal maintenance. After each use we advise emptying the bag (if bagging has been used), then check/clean off debris on the side discharge, rear slot, clean the underside of the deck with a cloth and wipe the unit down. If there is harder debris stuck to the underside, you may want to use a rubber deck scraper. Make sure to check the unit for loose nuts and bolts after use and secure if needed. Do not expose this unit to water. Check the blade for any damage/dullness and replace or sharpen as needed. Store the unit in a cool/covered and dry location such as garage or shed.

Here are some mowing tips that may be helpful: Mow when grass is dry. Mow no more than 1/3 of the length of grass at a time. Mow in the morning or late afternoon to reduce the heat stress on the newly cut grass. Alternate mowing patterns each time you mow. As grass develops a grain based on your cutting direction it will lean towards the direction of your mowing path. Changing the pattern allows better vertical growth and helps to keep the cut neater. Consider mulching. To mulch, remove the bag and insert the mulch plug into the rear of the unit. This will leave the clippings on the lawn allowing the nutrients and nitrogen contained within them to return to the soil and allow the remaining grass to recycle them (always discharge the mulch towards a previously cut area to prevent your mower from bogging down). Leave grass a little higher in shaded areas. This keeps them healthy in relatively nutrient poor conditions. Always keep in mind what conditions your variety of grass prefers. If your grass prefers cooler climates, reduce the frequency with which you mow and increase the cutting height of your mower during hot seasons to compensate for the reduced growth rate these varieties may experience in this type of weather.

Do I always need to use my self-propelled feature when operating a self-propelled mower?

No, you do not have to engage the self-propelled feature to operate a self-propelled unit. There are two separate motors. Familiarize yourself with the self-propelled feature and the cutting feature of your unit (instruction inside the manual). Once you understand these two features you can engage the blade without using the self-propelled feature.

Greenworks mower are designed for grass, weeds, and foliage. It would not be advisable to depend on the mower to mulch any other types of debris. Before operation please thoroughly inspect the area where the mower is to be used. Remove all stones, sticks, wire, toys, and other objects that could be tripped over or thrown by the blade. Thrown objects can cause serious personal injury.

Can I use my mower in wet conditions such as rain?

For safety reasons (which can be found inside your owner’s manual under safety information) we advise not using the mower in wet conditions as unstable footing could cause operators to slip, causing a potential hazard. 60V X-RANGE line which features IPX4 weather-resistant construction and can be safely used in damp conditions. Be mindful of your footing during use in potentially slippery conditions.

The SmartCut feature, also considered a Power Save feature, is designed to maximize run time and battery life by automatically detecting the length of grass and adjusting its power or throttle up when needed. With this feature, the rotational speed of the blades will not always stay the same. They will spin faster automatically when you hit thicker grass.

Does my Greenworks mower unit require gas or oil?

No, gas and oil are not required for the operation our units. Greenworks mowers are either battery operated or corded (extension cord sold separately). This information can be seen on the product page of each tool and inside the owner’s manual.

Greenworks offers a variety of different voltage lines for a wide range of individual residential needs. For example, we offer: 24v, 40v, 60v and 80v. Each voltage line has their own set of interchangeable tools and batteries but are not interchangeable across different voltage lines. To see compatible tools within each voltage line select shop by platform on our site. If you’re still unsure if your unit is compatible, please contact us at info@greenworkstools.com for further assistance. We’re happy to help

Reel mower grass catcher carrier

However, access to grass catchers on rear cutting units, especially center rear cutting units under the vehicle frame, is substantially more difficult.

If the weight of the grass catcher is transferred to the cutting unit, it tends to reduce the height of cut.

Disconnecting the hook from the handle is required to install or remove the grass catcher, and can be difficult for rear center cutting units under the vehicl.

the structure of the environmentally friendly knitted fabric provided by the present invention; figure 2 Flow chart of the yarn wrapping machine for environmentally friendly knitted fabrics and storage devices; image 3 Is the parameter map of the yarn covering machine

Method used

[0031]In a second embodiment, hanger 244 may include retaining projection 245 configured to retain and prevent dislodgment or displacement of the grass catcher from the carrier during use, especially if the grass catcher is jarred or bumped while mowing or transporting. Hanger 244 may be fastened to the reel mower cutting unit lift arm with bracket 248, and the hanger may extend forwardly from the lift arm over the top of the grass catcher. Front link 240 may rest in and be supported by closed loop 246 at the forward end of hanger 244, providing a sliding joint therebetween. Retaining projection 245 may extend forwardly and downward.

the structure of the environmentally friendly knitted fabric provided by the present invention; figure 2 Flow chart of the yarn wrapping machine for environmentally friendly knitted fabrics and storage devices; image 3 Is the parameter map of the yarn covering machine

Benefits of technology

[0013]The reel mower grass catcher carrier makes it simple for an operator to install and remove a grass catcher from under a vehicle, and facilitates installation or removal of the grass catcher when the cutting unit is in either the raised transport position or the lowered mowing position. The grass catcher is not supported by the cutting unit, and does not nega.

the structure of the environmentally friendly knitted fabric provided by the present invention; figure 2 Flow chart of the yarn wrapping machine for environmentally friendly knitted fabrics and storage devices; image 3 Is the parameter map of the yarn covering machine

Abstract

A reel mower grass catcher carrier includes a bail having side rods under the left and right sides of a grass catcher, a front link having an inverted U-shape and having connected to the left and right side rods and a central portion extending on each side of the grass catcher, and a hanger extending forwardly over the grass catcher and connected to the central portion of the front link. The grass catcher can be installed or removed from the front of the carrier while the bail, front link and hanger stay connected together.

  • mclane, grass, catcher, reel
  • mclane, grass, catcher, reel
  • mclane, grass, catcher, reel

Examples

Embodiment Construction

[0018]In one embodiment, reel mower cutting unit 100 includes a horizontally aligned cutting reel that interacts with a bedknife to cut grass with a scissoring action. The cutting reel may be rotated by an electric motor mounted to one of side panels 102 on the left and right sides of the cutting unit. Grass may be cut between rotating reel blades of cutting reel and a bedknife mounted between the side panels. Alternatively, the reel mower cutting unit may be driven directly or indirectly by the engine through a mechanical or hydrostatic transmission. The reel mower cutting unit rotates about a generally horizontal and laterally extending axis, and may be carried by front and rear rollers 104, 106 coupled to the side panels and contacting the ground during mowing operations. The front and rear rollers may be adjusted up or down to change the cutting height.

[0019]In one embodiment, the reel mower cutting unit may be pivotably attached to lift arm 108 that is connected to the frame of a triplex riding greensmower, fairway mower or trim mower. The reel mower cutting unit may be attached to the lift arm through yoke 110 which may pull the cutting unit during mowing operations, allowing the cutting unit to follow the contours of the ground surface and cut grass at a specified height.

[0020]In one embodiment, grass catcher 114 may be positioned directly in front of reel mower cutting unit 100. Grass catcher 114 may be a solid or flexible plastic structure with opposing sides 116, front wall or panel 117, lower wall or panel 118, and upper wall or panel 120. The lower wall or panel may extend over the front roller of the cutting unit. A rearward opening in the grass catcher may face the reel mower cutting unit to receive grass clippings discharged by the cutting unit. The grass catcher also may have one or more handles 122, 124 on the upper wall and side surfaces.

[0021]In one embodiment, reel mower cutting unit 100 may be mounted to a traction unit of a grass mowing machine having lift arm 108 that may be hydraulically or electrically actuated to raise the cutting unit from a mowing position to a transport position. Reel mower grass catcher carrier 126 may be used for a reel mower cutting unit, especially for a center rear reel mower cutting unit located between the front and rear wheels of a vehicle, under the center of the vehicle frame.

[0022]In one embodiment, reel mower grass catcher carrier 126 may include bail 128 pivotably attached to a reel mower cutting unit so that the bail may pivot on a horizontal axis. The grass catcher may rest on the bail in the grass collecting position as shown in FIGS. 1 and 2. Bail 128 may include a pair of side rods 129 extending fore and aft along the left and right sides of the grass catcher. At least part of the bottom surface 118 of the grass catcher may extend below the bail side rods 129. Each of bail side rods 129 may be attached with pivot mount 130 to one of the left and right side panels 102 of the cutting unit. With the grass catcher in the grass collecting position, bail side rods 129 may extend forwardly from the side panels along or under a shoulder surface of the lower wall or panel 118 of the grass catcher. Bail cross rod 132 may extend transversely between the pair of bail side rods 129 and may be secured or attached between the pair of bail side rods. With the grass catcher in the grass collecting position, bail cross rod 132 may fit under and into groove 134 in the lower wall or panel of the grass catcher between the grass catcher’s left and right sides. The bail cross rod may help locate the grass catcher relative to the cutting unit. Additionally, the forward ends of bail side rods 129 may include locator horns 136. The locator horns may extend forwardly from the side rods and from the grass catcher, and may be separated by at least the width of grip 138 or handle in the front end or lower wall or panel of the grass catcher. The locator horns may assist the operator to guide the grass catcher forwardly during removal, and back into position during installation.

[0023]In one embodiment, reel mower grass catcher carrier 126 may include front link 140. The front link may be an inverted U-shaped rod having first and second ends attached by pivot mounts 142 to bail 128 at or adjacent the forward ends and/or locator horns of the bail side rods. Front link 140 may be pivotably fastened to the bail at or near the sides of the grass catcher, rather than at the center of the bail directly in front of the grass catcher. Fastening front link 140 to the bail at or near the sides of the grass catcher provides a gap for an operator to access the grass catcher from the front of the carrier. Front link 140 also may have a central portion extending generally upwardly in front of the grass catcher.

[0024]In one embodiment, reel mower grass catcher carrier 126 may include hanger 144 fastened to reel mower cutting unit lift arm 108. The hanger may be fastened to the lift arm rigidly with bracket 148. Hanger 144 may extend forwardly from the lift arm over the top of the grass catcher and may be attached to front link 140. The hanger pivotably supports front link 140, and the front link pivotably supports the bail, so these components transfer weight of the grass catcher to the lift arm. The front link may rest in and be supported by closed loop 146 at the forward end of the hanger, providing a sliding joint therebetween. The sliding joint may allow the grass catcher to rotate during turns. The angle of the hanger relative to the lift arm may be adjustable to optimize the location of the hanger under the vehicle frame.

[0025]In one embodiment, when the grass catcher is in the grass collecting position, front link 140 may be spaced forwardly of the grass catcher, preferably at least about one inch forwardly of front panel 117 of the grass catcher. Front link 140 may be spaced forwardly from grass catcher front panel 117 sufficiently so that the operator can move the grass catcher forwardly and upwardly from the bail, away from the cutting unit, without disconnecting the hanger, the front link or the bail from each other. Then, while the hanger continues to pivotably support the front link, and the front link continues to pivotably support the bail, the operator can easily slide and remove the grass catcher transversely through either the left or right side of the carrier. Likewise, the operator may install the grass catcher by inserting it through either side of the carrier, and then sliding the grass catcher towards the cutting unit to the grass collecting position resting on the bail, without disconnecting the hanger, front link or bail.

PUM

We can also present the details of the Description, Claims and Application information to help users get a comprehensive understanding of the technical details of the patent, such as background art, summary of invention, brief description of drawings, description of embodiments, and other original content. On the other hand, users can also determine the specific scope of protection of the technology through the list of claims; as well as understand the changes in the life cycle of the technology with the presentation of the patent timeline. Login to view more.

the structure of the environmentally friendly knitted fabric provided by the present invention; figure 2 Flow chart of the yarn wrapping machine for environmentally friendly knitted fabrics and storage devices; image 3 Is the parameter map of the yarn covering machine

Sun Joe MJ501M Manual Reel Mower w/ Grass Catcher | 18 inch

The above item details were provided by the Target Plus Partner. Target does not represent or warrant that this information is accurate or complete. On occasion, manufacturers may modify their items and update their labels.

We recommend that you do not rely solely on the information presented. If you have a specific question about this item, you may consult the item’s label, contact the manufacturer directly or call Target Guest Services at 1-800-591-3869.

Description

See Joe Mow. No Messy Gas; Just An Easy-To-Use, Lightweight, Maneuverable And Economical Push Reel Mower. The Sun Joe Mj501m Reel Mower With Grass Catcher Handles Tough Turf With Ease And Provides A Quiet, Eco-Friendly Solution For Any Lawn. The Mj501m Comes With A Handy Rear Collection Bag To Help Keep Your Yard Nice And Tidy. Powered By You, The Sun Joe Mj501m Has An 18-Inch Wide Cutting Path And A 9 Position Height Adjustment Lever. Tailor Cutting Heights Up To 2.44-Inch So You Are In Complete Control Of Your Grass. The Mower’S Dual Wheel Design And Sharp Harden Steel Blades Ensures Accuracy And Cutting Efficiency. The Sun Joe Comes With A 2-Year Full Warranty.

If the item details above aren’t accurate or complete, we want to know about it. Report incorrect product info.

Buying a Reel Mower

A traditional rotary lawn mower uses a flat, spinning blade that cuts grass the way a machete chops tall grass in a field. By contrast, a reel mower (sometimes called a cylinder mower) functions more like a pair of scissors. Blades of grass are caught and cut between the spinning reel (the curved metal that resembles a strand of DNA) and a fixed horizontal blade called the cutting bar.

The resulting clean, precise snip makes for healthier, more attractive lawns. That’s why reel mowers are frequently the machines of choice for golf courses. Reel mowers also require more lawn prep before mowing. Manual and electric models in particular don’t have the force required to cut small sticks and twigs that a rotary mower can easily grind up.

If you’re considering a reel mower purchase, here are some key factors to keep in mind:

Power source. Many people associate reel mowers with manual, push-driven mowers. While these make up the vast majority of reel mowers targeted at residential homeowners, there are also gas-powered, corded electric and cordless electric reel mowers.

Cutting width. Wider reels make big jobs go faster, but make navigating tight spaces more difficult. Keep in mind that on manual reel mowers, the wheelbase is larger than the reel width. You’ll need to overlap your passes slightly and may need a touch-up pass with a trimmer for the edges.

Cutting height. Almost every mower has an adjustable cutting height, but not all have the same range. If you prefer a short or longer lawn, be sure to check the mower’s maximum and minimum height. Reel mowers are most effective when cutting lawns two inches tall or less.

Weight/maneuverability. Lighter mowers are more mobile, but also more likely to react to bumps and divots. That bouncing can result in an uneven cut. The average weight for a manual reel mower is around 20 pounds.

Accessories. Some reel mowers have everything from cup holders to bagging accessories.

Sharpening the blades. Reel mowers need to be sharpened occasionally. For homeowners with smaller yards, a sharpening every year or so might be fine. But if you’re planning on keeping a larger yard trimmed especially short, you may need to sharpen the mower blades a few times each season. You can take the mower to a mower service center for sharpening or DIY it. Always check what kind of sharpening the mower manufacturer recommends.

Via Merchant