DIY snow shovel on a tiller

Blade installation

To install the grader, you will have to resort to using brackets mounted on the frame of the power unit being used. Additionally, the blade is attached to the tiller with two rods, which, when inoperative, make it possible to unload the motoblock brackets. A knife made of a steel plate 850x100x3 mm is attached to the lower horizontal edge of the grader by means of a bolt connection.

Now, after the blade is ready, you need to install it and you can start clearing snow drifts, removing garbage or leveling the earthen area on your site. A do-it-yourself blade for a tiller is a versatile equipment with which you can perform various works. And self-production will make it possible to get a multifunctional device adapted specifically to your needs..

In order for the motoblock blade to last as long as possible and resist corrosion, it should be treated with a special primer or protective paint..
The rubber strip attached to the working edge of the shovel should protrude beyond the steel plate.

Tiller Snow Shovel Design

  • vertical plane of the blade;
  • struts for structural rigidity – 4 pcs.;
  • horizontal plane of the blade;
  • knife;
  • eyelets for fastening rods.

Homemade snow shovel

Dump barrel

To make a snow shovel for the Neva tiller on your own, you first need to collect the necessary tools and materials. So, we need:

  • an old steel barrel with a capacity of 200 liters;
  • a strip of iron with dimensions of approximately 850x100x3 mm;
  • 1 m of a square pipe with a section of 40×40 mm;
  • bolts М10, М12 and М8, as well as washers and nuts;
  • a set of drills for metal;
  • pliers;
  • set of wrenches;
  • a sheet of thick durable rubber;
  • small but thick steel sheet;
  • angle grinder with discs for metal;
  • welding machine;
  • hand electric drill.

After all the tools, materials and drawings have been collected, you can start making a do-it-yourself blade for the tiller. The simplest solution would be to make a bucket from an old 200 liter barrel, since it initially has the optimal roundness. In this case, it is not necessary to heat the metal sheets and bend them, giving them the desired shape. So, you need an old barrel, from which you need to cut off the lid and bottom of the angle grinder. The resulting pipe should be cut lengthwise into three equal segments. These two thirds must be joined together along the contour using a welding machine, and the remaining third must be cut with an angle grinder into strips that will be used to ensure sufficient rigidity. Attach the shovels one strip at a time, and distribute several pieces evenly along the entire length of the blade.

Homemade snow plow design

Now, to further strengthen the entire structure of the blade, you need to make a knife at the bottom of the bucket. This will require an iron strip with dimensions of 850x100x3 mm. Using an electric drill, drill three holes with a diameter of 5-6 mm and a distance between them of 100-120 mm in the knife. This is to reinforce the rubber pad, which will prevent the bucket from damaging the road surface. The knife is attached to the working edge of the bucket using a bolt connection.

After assembling the snow shovel and blade, you need to make and mount the blade mount. Weld a piece of pipe to a homemade motoblock blade in the center of the structure. In the middle of the pipe, by welding, fix a semicircle made of a thick sheet of metal and make several holes in it to set the required angles of rotation and fix the tiller blade.

Next, you need to take another piece of square pipe and make an L-shaped holder out of it. The short side of this holder is installed in a pivoting semicircle, and the other end of the pipe is bolted to the frame of the power unit. To adjust the height of the blade, two bolts are used, screwed into the recess of a square pipe, which is welded to the hitch and is put on the L-shaped holder. The video shows a snow shovel for a tiller and working with it.

Homemade dump

Snow plows that can be installed on almost any type of equipment (tractors, ATVs, cars or tillers) make life much easier and the process of removing snow drifts itself. Any snow plow consists directly of a working body, a steering angle adjustment mechanism and a fastener that fixes the shovel to the chassis of the power unit.

Read more:  Unlocking wheels on a tiller with your own hands

DIY snow plow for a tiller

Despite the fact that there are various modifications of factory devices for cleaning the fallen snow masses, however, according to the presented drawings, you can easily and independently make a snow shovel. Thanks to such attachments for the “Neva” tiller, you can clear your site from snow drifts in winter, and use it the rest of the time for garbage collection, leveling earthen pads and much more. Despite various modifications, all plows are characterized by the same general design and principle of operation. The snow shovel has three main positions:

  • forward;
  • to the right with a slope of 30˚;
  • to the left with a slope of 30˚.

A self-made blade made from a gas cylinder or steel barrel must be turned 30˚ to the left or right before snow removal work. Having set the required angle, the tiller‘s shovel is fixed in the required position by means of metal cotter pins.

The width of the working grip is usually 1000 mm, subject to the use of 2-3 mm metal for the manufacture of a shovel. True, some models may be more or less than this value. The industry makes snow shovels from high quality steel.

Tools and materials

To create a snow plow yourself, you will need:

  • steel sheet 850x700x3 mm;
  • 4 steel plates 450x230x3-4 mm;
  • iron strip 850x100x3 mm;
  • two eyelets for attaching rods;
  • 1 m of a square pipe with a section of 40×40 mm;
  • bolts М10, М12 and М8, as well as washers and nuts;
  • two rods 520 mm long;
  • a set of drills for metal;
  • pliers;
  • set of wrenches;
  • a sheet of thick durable rubber;
  • small but thick steel sheet;
  • angle grinder with discs for metal;
  • apparatus for electric welding;
  • hand electric drill.

Scheme for making a shovel blade for a tiller

How to make a homemade blade (shovel) for a tiller – do it yourself

In Russia, there are such winters that very often the owners of private households are faced with the problem of removing a large amount of snow. Traditionally, this problem has been solved with conventional shovels and various tools. Now, when many farms have at least tillers that can be equipped with various types of attachments, snow removal, debris removal and other work has become much easier..

Features of the manufacture of a snow plow

Consider another option for making a shovel, which is not too different from the previous one. For the blade itself, you will need 3 mm steel sheet, and for the struts that provide additional rigidity, you need to take thicker steel. It is necessary to make holes in the racks for attaching the shovel to the rods. It is very important to ensure vertical placement of attachments homemade equipment in relation to the front of the power unit.

  • shovel;
  • barbells;
  • bracket for attaching the rods to the tiller;
  • thrust.

Tiller with blade

As you can see, anyone who knows how to handle tools and an electric welding machine can independently create a snow plow from a barrel or a gas cylinder. There is nothing complicated in this, for this you only need the simplest drawings, of which there are plenty on the Internet, tools and materials available on the farm of almost any craftsman. In addition, this will make it possible to significantly save on the purchase of ready-made attachments. The video shows the installation and operation of the blade on the tiller.

Features of the construction of a snowplow

As another example, it is necessary to consider another option, which does not differ from the previous one, but still has its own characteristics..

For a dump that is in direct contact with snow, you need to prepare a steel sheet 3-4 millimeters thick. For racks that make the unit stiffer, you need to take steel 5-7 millimeters thick.

In such racks, holes are drilled with which the shovel will be attached to the rods. It is important that the fasteners of the homemade snowplow are vertical in relation to the agricultural equipment..

Such a model will consist of the following parts:

Snow Clearing With My Homemade Walk Behind Snow Plow DIY

  • shovel;
  • a bracket that connects the device to a tiller or other equipment;
  • barbells;
  • thrust.

Do-it-yourself blade, drawings

Many ATV owners have a desire to make a do-it-yourself blade for an ATV. This is certainly a good idea, and a person with arms growing out of the place from where they are supposed to construct a blade will not cause any particular problems..
do-it-yourself ATV blade video
Why not.

After all, this is the right way to save money. Drawings of a blade for an ATV are almost impossible to get, since there is no such information on the internet, but you can develop a manual yourself and make a blade according to your own method.

In this subtitle, I can somehow help you solve this problem.

And so, do-it-yourself blade – what is required?

Firstly: a sheet of iron, springs, an angle grinder, a welding machine, a ruler, a pencil (chalk), metal profiles, and of course various components in the guise of nuts, bolts …

this is what we should strive for

in order to design a blade for an ATV with your own hands, drawings of the blade are needed, which we will now provide.

Read more:  Kit For Installing The Engine On The Tiller

In fact, the design is quite simple and does not take too long, the main thing is not to be lazy and decisively approach the matter.

Garage quad-masters have created many varieties of attachments and everyone has different ones, who do what they do and what they think of.

Overview of tire types for different roads on an ATV

Also, do-it-yourself blade for an ATV is offered to your attention. Stobno isn’t it?))

Do you find the material useful? below! I will be grateful!

Homemade blade video

Final work

The bottom should be sheathed with metal in order to prevent the element from cutting into the ground. The depth of the bottom can be whatever you choose yourself. If the height of the main element is equal to 450 millimeters, and the depth is equivalent to 220 millimeters, then such equipment will more resemble a bucket.

snow, shovel, tiller

How to make a homemade blade (shovel) for a tiller – do it yourself

There are such winters in Russia that very often the owners of private households are faced with the problem of removing a large amount of snow..

Traditionally, this problem has been solved using conventional shovels and various tools..

Now, when many farms have at least tillers that can be equipped with various types of attachments, snow removal, debris removal and other work has become much easier..

As you can see, anyone who knows how to handle tools and an electric welding machine can independently create a snow plow from a barrel or a gas cylinder.

There is nothing complicated in this, for this you only need the simplest drawings, of which there are plenty of them on the Internet, tools and materials available on the farm of almost any craftsman.

In addition, this will make it possible to significantly save on the purchase of ready-made attachments. The video shows the installation and operation of the blade on the tiller.

Blade for clearing snow on an ATV

Do you need an ATV blade for you? If so, why? Will the snow plow be useful for an ATV and can handle heavy snow drifts??

In the northern regions, concepts such as snow, blizzard, snow drifts are very common..

In winter, in the outbacks, in villages, and even in underdeveloped towns, you often go out into the street, look, and there is hell. Everywhere the snow is generated, you can’t pass it.

You have to wait half a day for a tractor or some other snowblower to pass. Many have large areas in the yard on their personal plot, summer cottages, which are also covered with snow.

But the difference is this: no one there will clean your snow. And you have to turn back such volumes yourself.

Of course, some people are just for joy, but for others, cleaning the snow brings certain inconveniences, because it will take a lot of effort and time. And so if you have an ATV in the possession, or better on tracks and large territories of personal plots, I advise you to purchase a blade for an ATV.

snow, shovel, tiller

This thing or an additional component of a quadric is simply necessary, and its purchase will make life more fun and freer in time, and your paths, paths, parking lots, ice skating rinks will be clean. Who is not afraid of the cold, you can get a children’s ATV and give the child the opportunity to frolic in the winter)).

Snow plow for ATV is quite simple and quick to install. Its main components:

  • locking mechanism. Thanks to it, you can easily remove and install the blade in a short time alone;
  • swivel mechanism. Has up to five positions of rotation;
  • depreciation mechanism. Powerful springs will allow you to hit the oncoming obstacle, reducing the possibility of blade breakage. Adjustment is carried out with a screw tension;
  • fasteners for the winch. Under your careful guidance of your winch control skills, the fasteners will make it easy to raise and lower the knife.

The blade for the ATV is made of steel, the thickness of which is from 2 to 6 mm.

When choosing a snow plow specifically for your ATV, it is worth considering the necessary requirements. The case is as follows: the dumps differ in height and width. Width should be slightly wider than ATV.

This is explained by the following: during cleaning, the bucket must clear the road from snow directly by the ATV itself, it is necessary in order to better adhere the wheels to the road surface, and snow chains can also help with this..

Otherwise, it will be difficult for the square to move, and if there is a lot of snow, you will not be able to clean the required area..

Homemade SNOW PLOW for MOTOCULTIVATOR

Depending on the control and lifting method, the blades can be divided into three types:

  • snow plow for ATV with manual lifting;
  • lifting with a winch;
  • operation of an electric motor or pneumatic control

here is a video of a pneumatically controlled blade, we look interesting

Read more:  Do-it-yourself half-axles on the tiller

The first way speaks for itself. But here you have to sweat a little, but such a snow plow for an ATV is the most affordable and cheapest option. The second method is slightly better – maneuvers with the bucket are performed by a winch pre-installed on the machine, the third case is an electric motor. This method is the most technologically advanced, but also expensive..

Remember, not every square can remove snow. The power must not be less than 300 cubes. Otherwise, the efficiency will be small..

What to make a bucket from

When choosing a barrel for making a bucket, it should be made of thick metal. The best option would be stainless steel. If there is no strong barrel and cylinder, then you can choose the usual.

Tiller blade-shovel, overview, application, use

Characteristics:

  • Weight, kg: 30
  • Brand country: China
  • Plow swing angle, degrees: 30
  • Capture width, mm: 900

Universal shovel Bertolini 80 cm

Tools and materials

You can install a snow clearing knife on the frame of any motor-cultivator with a power of more than 4 hp. and a weight of at least 50 kg. The heavier the machine is, the better it will cope with the effects of a blizzard. It is best to equip the domestic tiller Neva with a shovel. This equipment has high performance, adapted to work in the most severe weather conditions with maximum load..

snow, shovel, tiller

A do-it-yourself shovel for a tiller is made using the following devices:

  • roulette;
  • welding machine;
  • angle grinder with discs for cutting and grinding metal;
  • electric drill;
  • set of wrenches;
  • screwdriver;
  • paint, paint brush.

After preparing the tool for work, it is necessary to decide on the material from which the shovel-blade for the Tiller Neva will be made. You can make a shovel from various metal products that have a sufficient margin of safety..

Dump on Tiller Neva can be assembled from the following materials:

An old gas bottle. The thick walls of the cylinder are resistant to high mechanical stress. Having received such a blade, the tiller will be able to cope with compacted snow, level roads, move sand and gravel.

Barrels with a volume of 200 liters. It should be borne in mind that the walls of the barrel are made of thin steel. Such a shovel for the Neva tiller can only be used to remove fresh snow, which did not have time to thicken and become covered with infusion..

  • Metal strips. Bumpers from trucks or corrugated steel, which cover the floors of hangars and warehouses, are well suited for making a blade for a tiller..
  • In order to make a swivel mechanism, you need steel with a thickness of at least 10 mm. You can find such material at scrap metal collection points. The manufacture of fasteners involves the use of shaped steel pipes 20×40 mm.

    When working on loose and deep snow, homemade snow removal equipment can get stuck. This problem can be solved with the help of tracks installed on the axle shaft of the unit. Homemade tracked snow blower can work in any conditions, productivity is not inferior to special equipment.

    Tiller bucket from a gas cylinder

    These photos, diagrams and drawings will help give a second life to an old unnecessary gas cylinder:

    Attaching the bucket to the tiller

    As a rule, all motor-cultivators have a standard bracket for attaching attachments. It is quite suitable for attaching a front blade. If necessary, an adapter is made to allow the bucket to turn to the right or left.

    The mount is made in this way:

    • A profile pipe is welded from the back of the bucket. To ensure a firm hold, it is advisable to duplicate the weld seam with several bolts..
    • A semicircle with a diameter of 20-25 cm is cut from sheet metal 10 mm thick. The workpiece is welded to the shaped tube. Holes are made in it along the edge with an interval of 20 mm to set the angle of the bucket.
    • A holder in the shape of the letter “L” is made from a square tube. The short side of the holder is fixed on the rotary sector, the other end is rigidly fixed on the tiller bracket. To adjust the height of the knife, use the bolts screwed into the adapter.

    A simpler connection method is a system of lugs and clamps made of thick sheet steel.

    Do-it-yourself blade for a tiller, drawings, video

    Many owners of agricultural machinery are interested in whether it is difficult to make a blade for a tiller with their own hands, because a homemade shovel is no worse than a purchased one, and besides, there is an excellent opportunity to save money.

    How much will a purchased shovel cost? Starting from 1800 rub. Up to 10 500 rubles.

    If you use improvised materials, a sheet of steel, an old barrel, a gas cylinder, a pipe and elbows of a suitable size, then the price will decrease dramatically.

    We offer several different ideas with drawings that will help you make universal equipment with your own hands..