Do-it-yourself flat cutter for a walk-behind tractor

Do-it-yourself motoblock-flat cutter DRAWING AND PHOTOS | With your own hands

How to make a flat cutter for a walk-behind tractor yourself?

In recent years, the arsenal of gardeners for tillage has expanded significantly. For example, more and more often you can see land plots where, instead of traditional boots, the land is cultivated by a walk-behind tractor, and together with a traditional cultivator, and often instead of it, gardeners are increasingly using a flat cutter. Therefore, it is not surprising that after a short time in our gardens, instead of a manual one, a flat cutter for a walk-behind tractor appeared.

Do-it-yourself walker for a walk-behind tractor

Homemade products from the engine from the washing machine:

How to connect a motor from an old washing machine with or without a capacitor
2. Homemade emery from the washing machine engine
3. Homemade generator from the engine from the washing machine
4. Connecting and adjusting the speed of the collector motor from the automatic washing machine
5. Potter’s wheel from the washing machine
6. Lathe from washing machine automatic machine
7. Wood splitter with a washing machine motor
8. Homemade concrete mixer

Homemade products for a walk-behind tractor (52 videos)

Super video selection of the best videos

DIY potato planter for walk-behind tractor

Potato planter from Ildar Sunagatullin

How to make a potato planter for a walk-behind tractor (beginning)

How to make a potato planter for a walk-behind tractor 2

How to make a potato planter for a walk-behind tractor 3

How to make a potato planter for a walk-behind tractor 4

How to make a potato planter for a walk-behind tractor 5 (dimensions)

Homemade POTATO PLANTER (tests)

Homemade potato planter. I plow and plant potatoes.

Homemade cultivators for walk-behind tractors

Homemade hedgehog cultivators for a walk-behind tractor

Homemade cultivator for a mini tractor from a walk-behind tractor

Homemade inter-row cultivator for walk-behind tractor

Whip up weeding cultivator

Homemade flat cutters for a walk-behind tractor

Do-it-yourself potato weeder for a walk-behind tractor. Flat cutter for walk-behind tractor

Flat cutter for a walk-behind tractor. Capture 1 meter

Cultivator-weeding machine 2-row to the walk-behind tractor

Homemade hiller for a walk-behind tractor

Do-it-yourself disk hiller for a walk-behind tractor

Do-it-yourself disk hiller for a walk-behind tractor. Dimensions

Hillers for planting potatoes. Super option!

Disc hillers with cultivator tines for hilling potatoes

Photo review of creating a disc hiller for a walk-behind tractor

Homemade mowers for walk-behind tractors

Homemade rotary mower for walk-behind tractor paired with adapter
The knives are 1 cm higher than one in relation to the other. The rotors are made of 3 mm metal. An additional paper air filter is mounted in the air intake, half of the size of a passenger car.

MOWER ON THE MOTORBLOCK WITH OWN HANDS (motoblock neva MB 3)
In this video, I will show how a rotary mower for a walk-behind tractor made of scrap metal works. The width of the home-made mower is 45 cm, the cutting height is 3.5 cm.The rotary mower is made for the Neva MB 3 walk-behind tractor, it mows grass of any height, both low and high, well.

Homemade grousers for a walk-behind tractor

How to make lugs for a walk-behind tractor. Manufacturing process.

Mini-video about making homemade lugs for the walk-behind tractor with your own hands.

Homemade potato digger for walk-behind tractor

Characteristics of a potato digger for a walk-behind tractor:

The simplest homemade potato digger for a fan-type walk-behind tractor. In this video I show a potato digger I made, with which I have been digging potatoes for more than 3 years on my site.

The potato digger is made of scrap materials for the “Neva” walk-behind tractor, without the use of a roar. Lightweight, simple, reliable and cost effective.

Homemade wood splitter for walk-behind tractor

Screw cleaver for walk-behind tractor

Wood chipper for walk-behind tractor

How to make a wood splitter

Homemade snow blower for walk-behind tractor

Homemade auger snow blower for a walk-behind tractor

Homemade seeder for walk-behind tractor

Corn seeder for walk-behind tractor

Homemade trailer for a walk-behind tractor

The trailer can be attached to a car, minitractor and walk-behind tractor

DIY trailer for walk-behind tractor

Dimensions of a trailer for a walk-behind tractor and a mini-tractor with your own hands

do-it-yourself, flat, cutter, walk-behind

In recent years, many land owners are increasingly using new technical developments that can make life much easier and spend much less time on performing certain tasks. Motoblocks, cultivators, mini-tractors and other devices have a tangible impact on the life of an agronomist.

If earlier traditional boots were relevant, which forced to work heavy soil in a half-bent state for more than one hour, today they are replaced by innovative flat cutters designed for operation together with a walk-behind tractor.

Disc cultivator for walk-behind tractor

One of the most popular types of attachments for a walk-behind tractor during the period of caring for plants in the summer is a cultivator. You can make a do-it-yourself polisher for a walk-behind tractor:

  • following the example of a classic cultivator in the form of a trailed ripper;
  • in the form of disc hillers used for processing root crops.
Read more:  Modern Chain Saw Lubrication System Stihl

The processing technology provides for the passage of the walk-behind tractor between two rows of crops or when using a multi-body cultivator of three or even four rows.

Ripper hiller can have several types of tools installed in one body:

  • ripper;
  • two double-moldboard plow-flat cutters;
  • 2 disc harrows for the formation of ridges;
  • two discs for plant protection.

Do-it-yourself plant protection discs for a walk-behind tractor are usually made of sheet steel. Depending on the purpose of the device to which they will be applied, their diameter is calculated. For cutters, usually the diameter is less than the cutters by 5-7 cm, and for a cultivator, they should be 30-35 cm in diameter. It is just that during milling, the plant area usually has a small height. But cultivation is carried out when the plants reach significant growth, and their breakdown at this stage can result in the death of the vegetable crop.

Medium-sized discs can be universal, with a diameter of 20-25 cm.At the same time, it is necessary to provide for a universal type of attachment to each type of attachment.

TOOL FOR MASTERS AND MASTERS, AND HOUSEHOLD GOODS VERY CHEAP. FREE SHIPPING. RECOMMENDED. 100% CHECKED THERE ARE REVIEWS.

The main advantages of the new tool

The flat cutter is one of the cultivator varieties, a kind of hybrid between a knife and a harrow. With a blade set parallel or at a slight angle to the ground, this tillage tool cuts weed roots at a shallow depth, but does not turn the soil, retaining more moisture in it. In addition to removing weeds and retaining moisture, the tool performs several other important tasks:

  • Improvements in soil structure;
  • Destruction of the crust formed after rain;
  • Saturation of the upper ball of the soil with oxygen.

With a flat cutter, you can carry out continuous tillage, preparing it for sowing or planting crops, or you can also inter-row cultivation of crops. The only inconvenience of working with flat cutters is that different crops have different row spacing, therefore, for their processing, tools with different lengths of the working blade are needed.

recently, a flat cutter for a walk-behind tractor was a curiosity. Today it is no longer a problem to purchase a high-quality factory tool, but many owners still prefer to make a flat cutter for a walk-behind tractor with their own hands. Having the necessary drawings on hand, it is not difficult to make a homemade flat cutter for the walk-behind tractor.

Subscribe to updates in our groups and share.

How to create a flat cutter for a walk-behind tractor with your own hands?

If a person does not want to unnecessarily spend money on factory attachments, he can create a homemade add-on using the parts and tools at hand. over, to adapt to the features of walk-behind tractors, even the classic Fokin plane cutter is suitable. First, we should familiarize ourselves with the diagrams and drawings presented on our website.

Features of flat cutters of a walk-behind tractor

This device has the following robots principle:

  • first, the knives gently penetrate the soil;
  • then the walk-behind tractor begins to move, cut and thereby destroy the root systems of unwanted plants.

When a given plant is already cut, it remains in the ground, rots there and subsequently becomes an excellent fertilizer for the soil.

A huge advantage of the walk-behind tractor is that when working in the ground, this device does not destroy or mix the upper crust of the earth, thus not only leaving the structure of this soil, but also improving it. Another plus. the flat cutter prepares the ground for planting plant seeds and makes the necessary holes.

In this video, we will consider a flat cutter for a walk-behind tractor:

But where can you use the Fokin flat cutter

  • In areas prepared in advance for these works (using a shovel, hoe, etc.).
  • For loosening plants with a row spacing of 10 cm.
  • Mow grass in a narrow space.
  • Copes with virgin wheatgrass, dividing it into small pieces and leaving it to rot in the soil, which will then serve as a good fertilizer.
  • And most importantly, it can replace many tools (such as a hoe, shovel, scythe, plow, etc.).

Do-it-yourself flat cutter for a walk-behind tractor

  • Features of motoblock flat cutters
  • Types of flat cutters of a walk-behind tractor
  • Ploskorez Maznev “PM-4”
  • Fokin’s flat cutter
  • Hydra
  • Petal
  • Crumpet
  • But where can you use the Fokin flat cutter
  • Single row hiller of a walk-behind tractor
  • Two-row hiller of a walk-behind tractor
  • Do-it-yourself flat cutter for a walk-behind tractor
  • Flat cutters for a walk-behind tractor. DIY methods
  • We make a flat-cut cultivator for a walk-behind tractor
  • What functions does a flat cutter to a walk-behind tractor have??
  • How to work correctly with a flat cutter for a walk-behind tractor?
  • How to create a flat cutter on a walk-behind tractor with your own hands?
  • Algorithm for creating a classic version for a walk-behind tractor:

The flat cutter (so named because the knives enter the ground in parallel (flat) and cut everything in their path) is an excellent assistant in the garden and garden, it is designed for weeding both large and small plots of land. This attachment, consisting of a bracket with two knives, is considered ideal for weed control. Also, this device can create beds and holes, level them, and even penetrate deep enough into the soil. Basically, a flat cutter for a walk-behind tractor prepares the soil for sowing crops or already processes ready-made, grown bushes.

Read more:  Do-it-yourself cutters for the tiller

Flat cutters for a walk-behind tractor. DIY methods

“What is this stick that looks like an opener with a sharp arrow at the base on the display case?”?

After a short story, they were delighted or bought it without question if there was untouched virgin land left on the site.

It’s simple. Imagine unplowed virgin soil overgrown with turf on clay soil.

When you try to “take” the ground with cutters, the walk-behind tractor will start jumping, without a hint of soil cultivation.

When working with a plow, it will often get stuck on the rhizomes of bushes and weeds. Sticking on clay, jumping out of soil or stalling.

In such a situation, the flat cutter is indispensable. With its help, the soil is easily parted under the turf into several parts. The roots of the meadow grasses will be dissected in no time.

This is due to a sharply sharpened arrow, which, like a knife, cuts everything in front of itself.

After the plane cutter, it is a pleasure to lift virgin soil with a plow. Thus, the flat cutter will save you time and a couple of liters of sweat on difficult soil.

The price of the issue is about 500 rubles. Therefore, I recommend that you pay close attention to it.

I hope the article is useful to you.? Please like and subscribe to MY CHANNEL. It will be especially interesting for amateur gardeners who want to make their work easier with mechanical assistants.

Interesting hitch? Find out about other amazing tools for your gardening assistant. Here are links to my articles:

About mounted snow blowers

About motoblock harrows

About the choice of lugs for the walk-behind tractor

This and much more on my channel!

Do-it-yourself flat cutter for a walk-behind tractor!

Crumpet

This tool is made of stainless steel (this gives the flat cutter resistance to rust, lightness and ease of sharpening), there are large and small. Good for loosening the soil, weeding it, as well as hilling, without disturbing and damaging the top layer of the earth.

Do-it-yourself flat cutter for a walk-behind tractor

In order to equip a flat cutter for your walk-behind tractor with your own hands, you need to take a long steel plate, measure the necessary parameters, cut and sharpen, so you get a knife blade. It is advisable to use preliminary drawings in order to make a flat cutter with your own hands accurately and without errors.

Push lawn mower brush cutter hack

The plane cutter is characterized by sharpening on one side so that it moves only forward. Then this blade must be attached to two supporting brackets, which are connected to the chain of the walk-behind tractor. It is also advisable to install limiters so that the plate moves smoothly, without going far into the soil (very often they take wheels with iron bushings from a children’s car for this, the main thing is that they fit the parameters).

For easy immersion of this plane cutter into the ground, so that it does not jump out and evenly huddle the beds, it must be made heavier by welding on top of some suitable part in terms of parameters. And now this tool for the walk-behind tractor is ready.

Then you need to correctly connect it to the walk-behind tractor. It is necessary to attach a bearing to the axis of the walk-behind tractor from the inside, and then weld a plate to it, to which a homemade flat cutter will already be connected.

As you can see, it is not difficult to make a flat cutter to the walk-behind tractor with your own hands, the main thing is to understand well what is what, and work a little. And you will get an excellent assistant in the garden or in the garden, who will do the old job many times faster and more efficiently.

It’s interesting: plowing a vegetable garden with a walk-behind tractor with a plow.

By itself, a flat cutter for a walk-behind tractor is not a tricky thing, but deserves attention. He can easily replace a chopper, a “fork” and sometimes even a shovel. The main thing is to take care of the instrument, and then it will be useful for you for many more seasons.

planting potatoes under a walk-behind tractor advice of an OLD plowman

We make a flat-cut cultivator for a walk-behind tractor

Many farmers are pleased with the incredible variety and improvement of agricultural technology. One of the most favorite and practical devices of our time is a flat cutter for a walk-behind tractor.

How to do something yourself, with your own hands. home master’s site

CULTIVATORS OWN HANDS REVIEWS AND TIPS: READER REVIEWS

How to make a do-it-yourself mounted flat cutter cultivator for a walk-behind tractor

It’s good to have a house in the country.

You rummage and rummage all your free time in the garden, in the land. Something turns out, but even more I want to plant, grow with my own hands. And how amazing these plants are: you treat them with kindness and soul, and they immediately respond to it. And everything would be fine if not for the weeds. Fighting them can drive an unprepared person crazy. But this must be done in any case. The question is how exactly.

Long and difficult. Flat cutter? There are doubts.

And now, on the basis of trial and error (or, more simply, by typing), I approached the creation of a universal flat cutter-cultivator, on which you can easily and naturally install various devices for cultivating the land.

To do this, you only need to loosen four bolts with a diameter of 10 mm using a 17 × 19 wrench, remove the nozzle, put another one and tighten the bolts again (in fact, the whole structure is perfectly visible in the figure). Previously, of course, each such replaceable nozzle must be set to the desired height or depth.

Read more:  Do-it-yourself opener for a walk-behind tractor

To create a universal flat cutter, materials were used that can be found in any shed. For example, the spokes in the wheels can be reinforced with nails or wire with a diameter of 6 mm (after all, working in the ground requires a certain margin of safety for all parts). And the forks for the same wheels (by the way, I took them from an old baby carriage) can be made by ourselves from a pipe with a diameter of 15 cm or a pipe with a square section of 20 × 20 cm.

DIY, from grass mower to brush cutter

But the steering wheel was used from an adult bicycle, but you can easily make it out of a pipe, if that.

It is mounted on the cultivator in such a way that it can be easily adjusted to suit your height using two 6 mm diameter bolts. I constructed a plow for planting potatoes, hilling and weeding row spacings from the boom of a conventional cultivator, to which I welded the sides. The angle of the strut in it was made at 90 ° in relation to the ground.

And again, such a plow can be made on your own if you wish. over, in combination with a device called “digger”, it helps out great when digging up potatoes.

For this, a hitch is placed on two wheels.

x and is adjustable to the width of the two furrows (approximately 65 to 70 cm). I dig potatoes through the row. It is more convenient to choose it after that. Yes, and before planting potatoes, I loosen the ground with my universal device.

I also have a device for trimming a mustache on beds with strawberries: vertical stripes to the bottom are sharpened under a knife on both sides.

They are adjustable to the width of the row and are used in tandem with a hitch. After that, I put one wheel and a narrow rake on the cultivator: the aisles are loosened, and the mustache overgrowth is removed. For the same work, you can use rollers with a flat cutter.

For cutting furrows in the beds, I use a device where the row spacing is freely adjustable. On my station wagon, you can install any rollers and flat cutters of various widths, as well as a rake. This machine justifies itself, and even very much. It’s quite simple to manufacture: a little bit of skills, a grinder, welding and improvised material, metal.

I think many will be interested in my proposal. It is a pity that there is no camera, I had to paint.

I will add: the corner of the weeding tool itself is the most obtuse.

The width of capture for any garden bed is from 15 to 40 cm. The steel strip is thick (spring from the old “Moskvich”) plus the steering column torsion bar from the “Zaporozhets”. It is welded at a slight angle to the ground. It is sharpened with a grinder from the top side, front and back. That’s all.

I did this technique to my brother and neighbor. A friend of mine has already assembled it according to my drawing: they say that the neighbors went to him all day to look at this miracle.

In general, the owners of the station wagon are in seventh heaven. They unanimously say that they have lived on earth in vain for half their lives without such a unit. The vegetable garden weeds very quickly! Therefore, I propose. Whoever takes an interest and makes such a station wagon will thank himself. Well, dear summer residents, good luck in the garden!

Flat cutter mounted cultivator for walk-behind tractor with own hands (drawing)

Universal homemade flat cutter cultivator: drawing

© Author: V. Khudobin Belgorod region.

With your own hands. How to do it yourself

ADVANCED CULTIVATORS

Design options for cultivators (Figures 1-3) performing several operations at the same time.

The cultivator shown in Figure 1 loosens the soil to the depth of the pins and chops the weeds with disc blades. U-blade cuts soil and weed roots.

The cultivator shown in Figure 2 loosens the soil to the depth of the cone knives, moves the soil to the side and chops the weeds with the disc knives. U-blade cuts soil and weed roots.

The cultivator shown in Figure 3 cuts the soil down to the depth of the disc blades and chops up the weeds. U-shaped knife cuts soil and weed roots.

When the cultivator is turned 180 ‘relative to the fork in the vertical plane, the U-shaped undercutting knife is removed from work and only the remaining operations are performed.

Figures 1 and 2 show the diggers. The designs provide for the adjustment of the depth of the holes from max = 12 cm to min by turning the fork with paired wheels. In the construction in fig. 2 added a plow for throwing mulch and soil to a depth of 5 cm. In this case, the excavator is used as a marker, and the seeds are placed on a solid substrate of soil. Backward on the bed, one of the side wheels closes the holes or presses the seeds into the soil. The angle adjustment of the paired wheels determines the depth of the holes.