This structural element can be taken from an old vehicle, such as a garden wheelbarrow. An additional pipe is required to secure it. The hub can be pressed in, and the rear part can be bored and fixed on the axle. In this case, it is extremely important to ensure that there are no distortions.
For wheel mounting, pins are the best option. They will provide a fairly reliable and durable connection. Bolted connections can be used to reinforce structures. The final stage of work on the manufacture of the chassis will be the fastening of the hubcaps.
After creating a hitch, it remains to make a hitch. This is a separate element, and at the same time it is very responsible. The simplest way to connect a walk-behind tractor to a trailer is a pipe-in-pipe assembly. A short piece of pipe is attached to one end of the pre-bent pipe in a vertical position.
At the opposite end of the main element (curved pipe), a second segment is welded, and it is necessary to fix a pivot on it, which will act as a connecting element. This robust design is easy to manufacture and highly reliable.
Drafting a project
It is imperative to make a plan, drawing or sketch of the future trailer. If you find it difficult to do it yourself, it makes sense to contact a mechanic specialist who, with the help of your explanations, will help you draw up a project.
In the drawings, they try to more accurately display the future structure from different angles, draw the nodes, put down all the necessary dimensions. In the necessary places, you can make leaders of the type “A. A”, “B. B” and draw large these nodes.
How to make trailer brakes
Brakes for the motoblock trailer. The braking system makes it easier and safer to transport goods. There are many options for brakes, but as practice has shown, the brakes from a motorcycle turned out to be the most effective.
How to make brakes on a trailer for a walk-behind tractor? Homemade brakes for a trailer are made from a cable, traction and a drum. The drum must be attached to the rear wheel hub. The free spaces between the protrusions are filled with coarse wire. Next, a piece of pipe is welded with a pre-sharpened disc, which is installed on the axle. The brake pads are also attached to it, from which the cable will come to the lever. The brake is installed on only 1 wheel and this is quite enough to perform this function.
You can make any seat on a uniaxial tractor with your own hands. It can be short or elongated. It is made in the form of a box or chest, into which you can later put tools or improvised items. If the side of the cart is too low, then it is better to come up with a seat with a back, so as not to strain the spine. To increase comfort, it is better to sheathe it with soft material.
If a chair or an armchair is used as a seat, then 2 deep connectors are made for the legs, for immersion in. Thus, the chair becomes removable.
To connect the trailer to the walk-behind tractor, you need a clutch and a console. They can be removed from any decommissioned equipment.
The trailer device can have 1 axle with a weak center of gravity. It is important to install the body correctly so that there is no overstressing at the coupling point. Therefore, the center of gravity must fall under the axle of the wheels. With two-axle trailers, it is much more reliable. The distribution of the weight of the load falls on not 2, but 4 wheels. They are suitable for carrying loads up to 1400 kg. You can use a car trailer.
What is a trailer for a walk-behind tractor
The hitch to the walk-behind tractor consists of:
The body’s ability to withstand a particular load depends on the build quality. The cart must be made of durable material that can withstand the weight of the load and all weather conditions. In addition, it is desirable that it have folding sides for easy loading and unloading. Dimensions must be roomy and correspond to the power of the walk-behind tractor.
Wheels are used on carts: automobile wheels, from a motorcycle, etc. The main thing is that the trolley for the walk-behind tractor can withstand heavy loads.
Wide wheels are preferable, as this increases the vehicle’s cross-country ability.
There are also fenders on cars. Protect against stones and dirt from the wheels.
All modern trailers are equipped with seats. Some craftsmen build a box under them to store the necessary things.
The drawbar is a triangle-shaped mount that connects the trailer to the walk-behind tractor. Brakes will improve the process of transporting goods.
Trailed equipment for walk-behind tractors can be purchased from manufacturers of agricultural machinery, or you can make a home-made trailer for a walk-behind tractor. Consider both options.
a uniaxial tractor plays the role of a horse team. It acts as a drive connected by a drawbar to the trailer. For this purpose, such brands of motoblocks as: Patriot, Ural, Caiman 320, Forza, Krosser, Foreman, VIKING, Texas are suitable.
You can make a trailer for the Neva walk-behind tractor, made of durable metal. Carrying capacity of the body is 500 kg. The trolley has a brake drive, which makes driving easier. On the Internet, you can find a lot of drawings of trailers for the Neva walk-behind tractor. They have a good design with minimal consumables.
Among the finished models, you can find a device with a dump truck function. The design is basically the same as on a conventional trolley, but with a modification that allows unloading by tilting the box. Although such a model is more expensive, it is necessary on the farm.
The manufacture and assembly of the trolley is often carried out by the owners of the motoblocks themselves. There are a lot of homemade products, but they can be assembled according to the same principle. a running gear on wheels, sides and an axle to connect a trailer with a walk-behind tractor.
Heavy trailer design
The creation of such trailers involves the use of a hitch from a car. If you prepare the necessary parts and tools in advance, then such an assembly will take about 2 days.
- channel (65 mm);
- front axle shafts (it is advised to use elements from “Zhiguli” or “Moskvich”);
- profile (pipe 60 × 40);
- steel tubes;
- corners (60 × 60);
- welding machine.
We take the axis from the channel as a basis. The dimensions of the cart for the walk-behind tractor are calculated based on your needs. We weld the front car axle shaft on both sides of the channel, and lay the profile on top. The profile must be laid in the center of the structure.
Along the edges of the channel (at the junction of the ends with the semiaxes), lay pipes 2 meters long, so that the joint divides all the pipes in half. The pipes must be laid parallel to each other. The ends of the pipes must be fastened perpendicularly using corners.
Thus, the central tube profile acts as a drawbar. From the front corners of the structure, it is necessary to stretch the corners or profile, which will provide additional strength. On the finished frame, you can install the body, as well as the driver‘s seat. The trailer for the walk-behind tractor must be attached to the drawbar.
Assuming that a trolley for a walk-behind tractor will cost you almost nothing. The for materials and other elements can be substantial, so you have to spend money. Before committing a crime to work, it is advised to draw up an estimate in which you need to enter all costs.
According to statistics, a trolley for a walk-behind tractor can be half the price compared to factory counterparts. But you need to understand in order to achieve such a result. you need to do serious work.
At the stage of preparation for work, you need to carefully consider possible problems, as well as prepare all the tools and materials. Making a homemade trailer can take time, so you need to set aside a few days in advance. On average, such work takes one week, but it is possible that more free time may be needed.
The trolley frame for the walk-behind tractor plays the role of its supporting structure. Dimensions and other elements are calculated based on its dimensions. Any inaccuracies must be identified and necessarily eliminated, because in the future, serious problems may arise when connecting various parts, corners, pipes and channel.
The most ideal solution for creating a frame is rectangular pipes with a cross section (60 × 30 mm). And for the traverse, you must use a square steel profile (25 × 25 mm). To make the structure more reliable, these elements must be welded, and also strengthened with special diameters, while it is necessary to leave protrusions above the side members.
For racks, a longitudinal profile must be welded to the front of the outlets on both sides. Next, you need to weld the upper trim of the racks with a cross section (25 mm).
It is necessary to choose the necessary materials according to certain characteristics, which provide additional strength, and also exclude the possibility of deformation under increased loads. A light trolley for a walk-behind tractor is made of rectangular or round pipes, as well as metal corners.
DIY bcs walk behind tractor ride on utility trailer
In order to make the best quality attachment of the trailer for the walk-behind tractor to its supporting structure, you will need the following elements:
- axial reinforcement 30 mm;
- racks for the driver’s seat (corner 40 × 40);
- solid triangle; brace (20 × 20);
- wheel axle stands (corner 32 × 32);
- corner (20 × 20) for the seat;
- front spacers (pipe 40 × 20);
- frame strapping (corner 40 × 40);
- rear braces (pipe 40 × 20);
- transverse reinforcement (corner 40 × 40).
A high-quality supporting structure is capable of providing the necessary margin of safety, and will allow transporting heavy and bulky goods on a trailer. In the case of frequent use of the trailer for driving on rough terrain, such a frame will perfectly cope with the tasks set.
To ensure the highest quality connections, you need a welding machine, which will achieve high strength and durability.
It is better to think over everything in advance to the smallest detail:
- method of connecting non-separable assemblies and parts: welding, riveting or screwing;
- connection of moving units: hinge, bushing, bearing, axle;
- nodes and their functioning;
- seat: single or rotating;
- if the body is tipping, then a self-dumping unit with a special handle or a mechanical body tipper is needed;
- stop-legs for parking (as on a scooter or moped);
- connection unit to the main walk-behind tractor: articulated, on bushings or on bearings;
- various additional components that depend on your vision of the trailer.
Trailer swivel assembly
case; 2. bearing 180205E (2 pcs.); 3. axis; 4. the drawbar of the trailer; 5. washers; 6. nut М20х1.5; 7. cotter pin; 8. spacer sleeve; 9. fork of the hinge unit of the walk-behind tractor.
Additional drawings of a homemade trailer
Additional materials with a detailed description and diagrams of individual nodes of a trailed device for a walk-behind tractor will help determine the design and give an idea of the assembly stages.
Often, sheets of steel or galvanized counterparts are taken for a homemade trailer for a walk-behind tractor. Sometimes they also use special reliable plastic. Naturally, metal sheets have a longer service life, but plastic counterparts will cost less.
When the material for a self-made trolley for a walk-behind tractor is selected, you can start drawing up a drawing, and diagrams of all supporting elements: a working body, a driver’s seat, and also a frame.
To do this work, you don’t need to be a mechanical designer, but a preliminary sketch must be drawn up correctly.
Why is it necessary to prepare carefully? When creating a trolley for a walk-behind tractor, you need to draw a model, indicate all complex areas, determine the dimensions, and also take into account all the nodes and connecting parts. The drawing must provide for running and supporting elements.
The driver’s seat must be correctly connected to the main module as well as the swivel head. It is necessary to attach all the necessary units directly to the walk-behind tractor using dumbbells and a console. Need to make a chain mechanism (axial rod).
The upper axle will serve as a support, and the pivot assembly should rotate around the axle on bearings, which should be protected with a good anti-dust cover. All voids around such bearings must be filled with a lubricant mixture.
Trailer for a walk-behind tractor. starting to manufacture
Trailer for a walk-behind tractor: 1. a bracket for mounted implements of an “Electronic” walk-behind tractor, 2. a console, 3. a carrier, 4. a footboard (20mm board), 5. driver’s seat (20mm board), 6. frame, 7. body (20mm board). 8. support beam (timber 50 × 50mm, 3 pcs.), 9. M8 bolt, 10. thrust ring (pipe 58 × 4), 11. wheel (from motorized carriage SZD, 2 pcs.) commonly. View
Characteristics of standard trailers
a single-axle tractor made in production, as a rule, has standard characteristics and dimensions, therefore, it is also advisable to select a trailer for a walk-behind tractor based on certain parameters:
- For the lightest models of motoblocks, the trailer should have an average length and width of 1 meter. As a rule, industrial options have a size from 85 cm to 115 cm. The provided capacity of the trolley for a walk-behind tractor in such a case should not exceed 300 kilograms. Price from 200;
- In medium-sized motoblocks, the power of which is from 5 horsepower, the dimensions should not exceed (1 × 1.4-1.5 m), and the capacity should not exceed 500 kilograms. Such options cost from 250;
- For heavy models, trailers for motoblocks of a biaxial type 1.2 m × 2-3 m are provided, with a maximum carrying capacity of 1 ton. The price for such models ranges from 500 and above.
for a cart for a walk-behind tractor can be significant, so many agricultural owners, in order to save money, are trying to make a trailer for a walk-behind tractor. The construction of such a trailer is not difficult, but everything exactly for this work must be carefully prepared, take into account possible nuances and delve into the technology of further manufacturing.
Features of the design of the trailer for the walk-behind tractor
Even to make it yourself, you will have to choose from several options.
But if you understand what the main parts of the trailer are, then it is quite simple to draw up its drawing, determine the dimensions of the “carriage” and select the necessary materials. Yes, and no step-by-step instructions are needed. the master himself, depending on the conditions, chooses both the sequence of technological operations and the method of their implementation.
All dimensions indicated, unless otherwise specified, in mm.
To install a towbar with your own hands, do the following. The brace of the device is aligned with the corresponding mount. It is usually located under the steering wheel of a walk-behind tractor. After that, the mount is fixed with a pin. The most reliable option is the use of a spacer bolt with dimensions of 12 by 60 mm.
After that, it is necessary to mount the removable axle of the hitch on a plow, trailer or other. To fix the towbar with your own hands, you must insert a threaded axle with a diameter of 16 mm into the hole obtained. A screw is screwed onto this element. It is also necessary to drill holes on the sides, into which bolts measuring 16 by 40 mm are also inserted.
Do-it-yourself hitch for a walk-behind tractor: drawing, recommendations for manufacturing
Before moving on to the question of how to make a tow hitch, you need to figure out what they are. The thing is that a uniaxial tractor has clutch assemblies both at the front and at the rear. In this regard, there are various devices that can be connected. In addition, the equipment differs in its functionality.
There are a huge variety of different devices on the market that are used to hitch a walk-behind tractor and any device. It is only important to choose the right one so that it fits the specific adapter. However, if this is not possible, then it is quite possible to make a towing device with your own hands. Although this process will take a lot of time and effort, the result is worth it.
It is very important to remember a few basic rules here. The very first thing. this is the engine power of the walk-behind tractor itself. If a do-it-yourself hitch is too heavy, then, naturally, a single-axle tractor will not move it. Most often, a do-it-yourself hitch is made for a car with dimensions of 1 by 1.15 meters. Using such a trailer, you can transport no more than 3 quintals of cargo at a time. If the engine volume of the walk-behind tractor is 5 liters or more, then the dimensions of the trailer can be increased by 25-35 cm.
If the farm uses a very powerful single-axle tractor, the size of the hitch can be increased up to three meters. However, in this case, most likely, you will have to install an additional wheelset and reinforce the body. In addition, you will need to use more durable and expensive materials in the production of a do-it-yourself trailing device for a walk-behind tractor.
Here it is important to start with the fact that all equipment that is attached to the front of the walk-behind tractor is considered to be attached. Trailed devices are all elements that are connected to the device using a special hitch located at the back. When making a do-it-yourself trailing device for a walk-behind tractor, it is important to consider one more fact. This group falls into two categories. The first includes highly specialized equipment, and the second category. multifunctional.
For example, a harrow or a potato planter can be used as a hitch. These devices belong to the first category. Landing and steering mechanisms are ranked as the second type. In other words, this is equipment that is only intermediate between the walk-behind tractor and any other device. These items are considered universal and are often referred to as adapters.
Trailers deserve special attention. It is believed that this is a highly specialized technique, since it can only be used for the transportation of goods. In fact, you can use a trailer to transport almost any item, which significantly expands the functionality of the device. It is also worth noting that it is the trailer that is a prime example of an adapter that has an elongated shape, at the end of which there is a wheelset. A capacious body is installed on top of this element, which serves for the transportation of goods. Currently, there are many different variations, differing in shape, maximum carrying capacity, type of wheelset.
The most important point, as mentioned earlier, is the material from which the hitch for the walk-behind tractor is made. In this case, he will decide everything. Therefore, it is recommended to carefully select the raw materials.
In the selected piece of material, you need to make several holes through which the parts will be connected using fasteners. You also need to have a bracket on hand, which will also be used to make the hitch. Experts recommend bending its long end either up or down so that in the future it does not interfere with the next steps. However, here it must be borne in mind that under no circumstances should he touch the ground.
Another simple but important tip. this is to take the factory model as a sample. If in the future you need to attach a non-standard attachment to the walk-behind tractor, you will have to use an adapter.
The simplest construction of motoblock homemade products is called a pipe-in-pipe coupling. It is made according to the following principle. A pipe with a smaller diameter must be welded to the end of the workpiece. It is with the help of this part that the coupling will take place. Another element of similar dimensions is welded from the opposite end. This part will serve to connect the walk-behind tractor directly. This type of attachment is considered not only reliable, but also provides excellent mobility.
What you need to know?
In order to successfully operate a trailer or other device, it is very important to have a strong hitch element. It is he who is the trailing device, with the help of which the equipment is moved due to the power of the walk-behind tractor.
There are a lot of options for making a trailing device for a walk-behind tractor with your own hands, but it is best to use the simplest and most functional. It is necessary to use high-quality steel as a material for manufacturing so that it can withstand huge loads. It is best to use a channel to create a hitch if it fits in size and thickness. A simple option is the U-shaped hitch for a walk-behind tractor.
Причіп для мотоблока своїми руками
It is recommended to make a drawing of the hitch to the walk-behind tractor before starting work on its manufacture. It is also important to adjust the attachments. This is done on an individual basis, since the characteristics depend on the type of soil and the power of the machine. The advantage of a home-made hitch for a walk-behind tractor is that it allows you to adjust for each block individually. After the adjustment is completed, you need to check it. To do this, it will be enough to drive a few meters. If necessary, the screw is tightened until the trailer reaches the desired position. Only then can all other screws be tightened securely and firmly. A hitch for a walk-behind tractor with your own hands is not so difficult to make according to the drawings.