Gas Consumption Per Trimmer Gasoline Per Hour

How to choose a trimmer for gasoline?

As the development of suburban construction grows, trimmers become more and more popular: compact lawn mowers needed for weed control, grass mowing, and gardening. This convenient thing allows you to take care of the site, destroying any amount of excess vegetation. Several degrees of safety can guarantee the protection of the user from damage and injury.

Petrol trimmer This is a compact lawn mower that works with a gasoline engine located at the bottom of the device. Cutting with herbs is carried out due to the working part, presented in the form of a knife blade, mowing line or other device. In addition to gasoline, this trimmer needs refueling with engine oil. Its most important advantages. lightness, compactness, ease of use.

Key device parameters

  • Power and type of engine. The wider the trimmer’s capabilities, the stronger the engine and the higher the fuel consumption. The engine can be light (1 hp and below), simple (within 1-3 hp) and reinforced (more than 3 hp). A two-stroke engine costs a lot less than a four-stroke engine, but it is harder to maintain, since you need to mix engine oil and gasoline to start. Their service life is relatively less. Accordingly, a four-stroke engine will be more complicated, its repair will be more expensive, but it has fuel and oil compartments, and the noise and emission level is much lower.
  • Working (cutting) part. For mowing grass, blades are used (suitable for removing any weeds, shrubs), as well as a nylon winch. The second option is more affordable and safe, but its service life is also significantly lower. This part of the device needs periodic replacement and is a consumable.
  • Handles of the device and stabilization system. Professional devices are equipped with a control system that resembles a bicycle handlebar, which provides device control and ease of use. The buttons are at hand, and this makes the job easier. Household trimmers are equipped with a ring handle, which is less convenient. But the buttons are on the panel, so accessing them is somewhat more complicated. The stabilization (anti-vibration) system is designed to reduce the load on the hands, as the blood vessels burst from constant vibration.
  • Cutting width. The higher this parameter, the higher labor productivity. However, for fine work, trimmers with a small cutting width are required.
  • The volume of the gas tank. A capacious tank allows you to work longer without refueling, but it weighs heavier.
  • Additional options. The devices are equipped with convenient devices for starting the engine (for example, a decompression valve or a spring starter). Replaceable nozzles will help to change tactics in the fight against unwanted thickets, achieving greater success in maintaining your site. Compression and convenient devices for starting the engine (for example, uki, as from constant fluctuation vessels.

Determine what types of gas trimmers

1. Home trimmers. The most common mowing device for ordinary grass, which grows in all areas. They are low power (about 1 hp) and are characterized by low weight. Such devices are compact and most often have a flexible shaft. This, in turn, provides a high level of maneuverability, but a short service life. The buttons are located on the shaft, so to turn on and off you must remove your hand from the handle. This is a good solution for domestic needs, but for more serious tasks this is completely inappropriate. As a rule, there are additional items in the package (gloves, mask), and this is a very pleasant change. It can be used without stopping for more than 20-30 minutes, after which you should take a short break (10-15 minutes) to cool the engine.

Gas Consumption Per Trimmer Gasoline Per Hour

Attempting to measure fuel consumption at the HUTER-GTT2500s trimmer

Related posts

Measurement Attempt expense fuel at trimmer HUTER-GTT2500s.

The fuel consumption of my lawn mowers. REAL. WITHOUT BRE

Consumption fuel chainsaws here Consumption VAZ car fuel here

Read more:  How To Replace The Coil With A Trimmer

pros. Flexible shaft (maneuverability, lightness), light weight, reasonable price, compactness, the ability to replace consumables.

disadvantages. Inconvenient arrangement of control buttons, high noise, short life, weak working part, thin metal case, many models are not understood, they lack an anti-vibration system, limited amount of use (only grass can be mowed).start operation at short intervals (20.30 minutes), pouring gasoline with oil (in a certain proportion, as a rule. 1:40).

2. Professional trimmers. Such devices have a shoulder strap, additional protection from the working part, a reinforced engine. Its power is more than 3 hp, respectively, the level of fuel and oil consumption is much higher. Instead of nylon fishing line, a screw knife is used, which cuts not only grass, but also small bushes, dense weeds. Anti-vibration system allows you to reduce the load on the hands, protecting them from overvoltage and, accordingly, from unpleasant physical sensations. There are also disadvantages, the most important of which is the high price of the solution. It is necessary to monitor the engine very carefully to avoid emergency operation, as the engine may fail during overload. After use, it is advisable to clean the device by removing any remaining grass.

Professional trimmer at work

pros. Straight shaft (provides a long service life and ease of use), anti-vibration system (eliminates the problem of rearrangement of limbs during operation), convenient location of control buttons, shoulder strap, low noise (for four-stroke engines), various compartments for oil and gasoline, possibility installation of a milling knife (for cutting thin trees or thick bushes).

disadvantages. The need for thorough maintenance of the tool, expensive maintenance and repair, increased consumption of gasoline and engine oil.

Related posts

3. Universal trimmers. Such devices are an intermediate solution between household and professional models. Engine power is 1-3 hp, and this is enough not only to combat unwanted grass, but also to cut thin bushes, young weeds. The working part can be made both in the form of a three-blade knife, and in the form of a nylon mowing line. As a rule, such a device is focused on a large area, but its own, and not for professional work. You need to take breaks at almost the same frequency as when using the home solution. But the cost of maintenance is comparable to professional models. The consumption of fuel and oil is at an acceptable level, but it must also be mixed upon delivery.

pros. The device is notable for its average price, long service life, and versatility.

disadvantages. The device requires careful maintenance, oil is filled with gasoline, the noise level is very high, and the anti-vibration system is usually not available.

4. Motor braids. Professional models, adapted for the most serious tasks, strongly resemble ordinary trimmers. But, unlike them, devices are able to cope with a very difficult job: cutting thick bushes and young trees. This is achieved thanks to a powerful engine (more than 3 hp) and a series of nozzles, including a metal knife and a coil with polyamide thread. The rest of the device is completely duplicated by a professional trimmer: there is also a shoulder strap and a handle control and anti-vibration system. But with this set of advantages, there are certain disadvantages: a very high price, the need for periodic maintenance and extremely expensive repairs. This solution is suitable for processing huge areas and daily work, including many hours of continuous work.

Video: Gas Consumption Per Trimmer Gasoline Per Hour

Petrol trimmer-lawn mower (lawn bone) MATRIX BMS 1150

pros. The presence of several applications, a wide range of use, low noise, high power, the possibility of continuous continuous operation, full versatility, shoulder strap, convenient direct control with a handle, straight shaft (high strength and reliability).

disadvantages. Very high cost, constant after-sales service, high oil and gasoline consumption, high weight.

Gasoline trimmers are widely used both among amateur gardeners and in the work of professional services. When choosing a particular model, customers are primarily guided by power, but it is also worth paying attention to other important indicators.

In this article we will consider what trimmer fuel consumption is, what it depends on, and which gasoline is best used.

What affects the trimmer’s gas mileage?

As a rule, with gas trimmers, the fuel tank is designed for a displacement from 0.5 to 1.5, which affects the weight of the tool and the operating time. The longest running time of this type of unit is 40 minutes, while the electric one is no more than 20 minutes.
Basically, gas trimmers are equipped with two-stroke engines, for them it is recommended to use fuel with an octane rating of at least AI-92 mixed with oil.

Read more:  How to Charge a Court into a Trimmer

The following indicators affect the gasoline consumption of the trimmer:

  • Power. The more powerful the engine, the more fuel it will “demand”. As you know, four-stroke engines spend more fuel than two-stroke engines, but they are much more powerful;
  • The surface of the plot and its dimensions. Most trimmers are designed for flat surfaces, but often there are stones, stumps, tree branches and other interfering debris in the way, which can affect fuel consumption;
  • Feature set. Many modern trimmer models are equipped with additional options, for example, mowing grass in hard to reach places, the ability to switch from one speed to another and others, which greatly facilitates the work on the site. But along with this, they sometimes need to spend more gasoline.

Trimmer fuel consumption rates

A few recommendations for choosing and using a fuel mixture

  • Recommended gasoline for trimmers. AI-92;
  • Prepare the mixture in the correct ratio gasoline: oil. 30: 1, otherwise the engine may be damaged;
  • Store the mixture in clean, safe containers;
  • The fuel mixture may settle over time, be sure to shake the canister before refueling;
  • Do not pour more gas than you can spend, it is better to add fuel later than to clean the tank.

Gas mowers and trimmers are very convenient, compact and maneuverable, suitable for work in any country house. They cope with grass in areas with different terrain and different sizes. Especially advantageous is their use in narrow, inaccessible places for a lawn mower. In addition, they are cheaper and easier to maintain than a lawn mower.

Did you know? When choosing which trimmer is better. gasoline or electric, experienced gardeners tend to gasoline. Electric largely restricts movement (a certain cord length), needs uninterrupted power supply and is not very economical to use. But at the same time, the cost of the trimmer is several times cheaper than gasoline, and it is silent.

Gas trimmer: the purpose of the tool in the country

The lawn trimmer is, in fact, a scythe for grass on gasoline. It is used for mowing decorative grass (leveling, cutting), for mowing weeds, for mowing grass on hay.

The trimmer does this quickly and accurately, in addition, it is lightweight and easy to maintain and does not require large storage space. the main thing that distinguishes the trimmer from a lawn mower.

With a trimmer you can not only cut grass and herbaceous plants, it perfectly cuts not thick (2.5-3 cm in diameter) branches of trees and shrubs. so it replaces the secateurs in the garden.

Did you know? Exist special models of trimmers, which, in addition to the main purpose, can also be used for snow removal, clearing tracks. Their kit includes snow tips.

Types of trimmers on a gasoline engine

Consider the different types of gasoline trimmers and find out what kind of work is best suited for each of them.


Used for mowing weeds and grass in adjacent areas. This is a lightweight tool with a curved handle with a power of 1 horsepower or a little more. Such trimmers are suitable for small volumes of work or infrequent mowing, haircuts.

When purchasing a household tool, you need to know how to use a grass trimmer. it needs to rest every 20-25 minutes of work, otherwise it may fail. But at the same time, the household trimmer has a moderate gas mileage and excellent maneuverability.

Important! The hotter the weather, the more often you need to take a break from the trimmer, this will save it from overheating and breakage.


Their power is higher. 2-3 liters. s., respectively, and gasoline for a professional trimmer is consumed more. Such a trimmer performs a much larger amount of work and has a knife in the configuration, that is, shears both grass and thin branches, shrubs.

It is also equipped with a shoulder strap and anti-vibration system. But also at work it requires rest every 30 minutes and cleaning the cutting part of the grass.


They are similar to professional ones, but they can also trim the lawns, that is, their trimmed canvas will be homogeneous, even and beautiful.

lawn mowers

Not only grasses, branches and shrubs mow, but even young trees can cut. They have a capacity of over 3 liters. with. They can work without interruption for several hours in large areas.

Important! Almost always, personal protective equipment comes with trimmers and lawn mowers. glasses or a face mask and gloves are required. If they are not, then purchase separately. without them, working is dangerous for your health!

Read more:  What Compression Should Be In A Trimmer Motor

How to choose a gas trimmer for a summer residence, selection criteria

Before choosing a gas trimmer, you need to at least briefly know the main parameters of the tool. The key to choosing a gas trimmer will be how often you plan to use it and what area it is intended for.

Based on this, the best gas trimmer for your particular site is selected according to the power and performance of each individual model.

Type and engine power

The best gas trimmers do not have to have the greatest power. If you have a small lawn. the most powerful trimmer for it is not required. A good medium power gas trimmer is fine. But if the cultivated area is large and there is a need to work on it for 6-7 hours a day, then a more powerful trimmer is needed.

By the type of suspension, trimmers are straps. the best option for infrequent use, and trimmers with a knapsack suspension. these are best taken with a constant, almost daily load on the tool.

By type of drive, gas trimmers come with a straight shaft or with a metal cable. It is better to take a tool driven by a direct shaft. they are more wear-resistant. By type of engine, gas trimmers are divided into two and four-cycle ones.

The former are filled with oil already mixed with gasoline, the latter have separate compartments for oil and gasoline. Push-pulls are considered more noisy, and their lifespan is often shorter. And four-stroke ones are more durable, more expensive to maintain and repair, but at the same time they work a little quieter.

The engine can be located in the upper or lower position. The ones located at the top are preferable. they are more convenient in operation, better cooled, more protected from clogging with grass and debris, and they, as a rule, have more power.

Knife and fishing line for trimmer

The line in the trimmer is used only for mowing grass. According to the type of pattern, several types of fishing line are distinguished:

  • in the shape of an asterisk. for a green decorative lawn or young grass;
  • in the form of a square. for tall grass with thick stems;
  • in the shape of a circle. a universal view, suitable for both the lawn and for woody and dry grass stems, leaves.

For cutting branches, cutting shrubs will need a knife. There are models equipped only with fishing line, and there are models with fishing line and with knives.

Weight and type of petrol trimmer handle

By the type of rod (handle), the trimmers come with a curved handle for small loads or with a straight one. for larger loads. The weight of the trimmer, as a rule, does not affect the operation of the instrument in any way, it matters to the person who works with him. if this is a man, then you can take a heavier model, if a woman, then it’s easier.

When choosing an instrument by weight, you need to take into account the size of the trimmer’s gas tank. the larger it is, the heavier the trimmed trimmer will be (on average 0.6-1.5 kg).

Additional devices

Before choosing a trimmer for a lawn, study all the possibilities of each model. some of them are endowed with additional useful functions. It can be a snow nozzle, anti-vibration system. for the convenience of hands, quick start of the trimmer with a decompression device, which increases the tool life.

Important! The wider the cutting width of the trimmer, the greater its productivity.

Advantages and disadvantages of a gas trimmer in the garden

Advantages include mobility, versatility, and tool performance. Disadvantages. not always a reasonable price, especially for multifunction mowers, and the noise of a working trimmer, even for models with reduced noise.

But, on the other hand, the tool has good power, performance, and besides, a gas trimmer can work in any weather (after rain, for example).

That’s all, how to choose a trimmer for a summer house or home. We want to decide and choose the trimmer that is suitable for your site, lawn or garden!

Was this article helpful?

Write in the comments which questions you have not received an answer to, we will definitely respond!

You can recommend the article to your friends!

You can recommend the article to your friends!