Is a backyard putting green considered landscaping?
In the mid-1990s, the concept of adding a putting green in one’s backyard took root around the United States. It’s not just for golf maniacs: Backyard putting greens are a less expensive alternative to installing a basketball or tennis court, and, when installed correctly, can add manicured beauty to a residential landscape.
While landscaping with ornamental trees, perennial plants and shrubs is done specifically for the sake of aesthetics, putting greens can also be practical. They provide recreation as well as visual appeal. So can a backyard putting green be considered landscaping? If not, someone should probably alert landscaping companies across the U.S. that have been supplementing their incomes during off-season months and droughts by installing putting greens since the 1990s.
What’s more, natural grass putting greens are so labor-intensive that some companies won’t install them if they doubt the owners have the time or resources to maintain them [source: TourGreens]. These companies also offer landscaping and water feature installation to soften and accent the putting green.
To cut down on putting green maintenance for people who want one without the hassle, landscape companies now offer them with artificial turf. The decision between natural and artificial is an important one, but far from the only one you’ll need to make before you invest in a putting green for your backyard. Read on to find out what other decisions you might face.
To keep up a natural grass putting green, you may need to be as well off as this guy.
There’s a great debate over whether putting greens should be created from natural grass or synthetic turf. Both have their benefits and drawbacks.
For starters, natural grass is what golf courses use. Golf courses also employ professional greens keepers, and you’ll be hard pressed to find a landscape company that will throw one of those in without significantly increasing the price of your putting green. It’s a full-time job to tend to a golf course and putting greens consistently require the most attention. This is true for commercial and backyard greens alike.
The suggested height for a natural grass putting green is one-quarter inch, which you’re not going to get with your regular lawn mower. You’ll need a specially-designed mower (an added up-front cost) for Bermuda or bent grass.- the two types of grass recommended for use in putting greens. To maintain the grass at that height, you’ll need to mow it from 3 to 7 times a week, depending on the season [source: Hamdani]. You’ll also need to learn about proper watering, fertilizing and other maintenance aspects.
Natural grass isn’t an all-around loser when it comes to putting greens. In fact, avid golfers swear by it. Since natural grass is used on commercial courses, practicing at home on synthetic turf would likely handicap a serious golfer. Natural grass is also cheaper to install. Over the course of several years, though, maintenance can make a natural green as costly as a synthetic one.
There are also maintenance considerations with synthetic greens. With most synthetic turfs, top dressings of sand are required as part of routine upkeep. Synthetic blades of grass tend to droop, so sand must be swept into crevices for support. Sand provides a different surface than surface root systems of natural grass; balls putted along a sandy surface tend to roll faster. Some new synthetic turfs are designed to stand up alone.- some even feature bent individual blades to further simulate a natural green. However, these types will significantly increase the cost of your putting green.
There are other costs to consider as well. Specifically, you must decide if you plan to install your putting green yourself or if you should spring for a professional to install it for you. Landscape trade magazines estimate the average landscape company sees a profit margin of 50 to 60 percent, so you can expect to pay double when hiring a professional [source: Grider]. That said, you’re also paying for peace of mind. Installing a putting green is tricky. The grade and contour must be precise to allow rain to run off properly, while the foundation beneath.- usually sand, dirt or powdered gravel, depending on the type of turf.- can’t have any divots or holes. HGTV rated the installation of a backyard putting green a 3 on a scale of 1 to 5 (with five being the hardest), and estimated it would take several weekends for the average homeowner to complete [source: HGTV].
If you choose to hire a professional company to install your putting green, be an informed customer. Landscapers have to learn how to install a putting green somewhere; like putting itself, practice makes perfect. Just be sure your landscaper isn’t practicing in your yard.- and charging you for a perfect green. Ask for references from previous jobs, and don’t be afraid to contact past customers. Who knows? You may end up with a new golfing buddy.
Product Description
Feature: Large Push type Houda roughed engineAdvantage: Large proportation Environmental friendly Low noisy
| MG22 | |
| S/N | 6122086 |
| Weight | 115kg |
| Cut width | 560mm |
| Cut depth | 1.9mm-25mm |
| Cutting efficiency | 1800m²/h |
| Mowing Speed | 2.1-5.6km/h |
| Transporting Speed | 8.5km/h |
| Mower real | 11-blade std |
| Brand | MR.GREEN |
| Engine | YAMAHA5.5HP |
| Fuel tank capacity | 4.5L |
| LWH | 18009501000mm |
| Packing Size | 1400950700mm |
| Manufacture date | 2018.5 |
Company profileWuhan dising technologies Co., Ltd.Is located in the east lake new technology development zone in wuhan, hubei province.It is a professional supplier of tourist attraction, theme park, characteristic town, and commercial block slow rail transit system;Our service covers the whole process of slow rail transit system survey and design, special track vehicle design and so on.We promise to improve our professional skills and be based on a careful design attitude, a profound understanding of customer needs and a rich experience in project implementation, to provide customers with high quality and reliable products and economic and reasonable projects.
Products SeriesIn the years of industry experience, the company created the Taiwan tenyun steam locomotive replica plate, the Tianya corner scenic spot in Hainan, the Changchun Yuet square project, the tram, the Shandong lling National Agricultural Park sightseeing train, the Anji Lu Jia Village sightseeing small train and so on. The main products covers three kinds of landscapes:tourism. Sightseeing trains, sightseeing trams and locomotives three kinds of landscapes.1. Electric and Diesel Train Sets2. Electric Locomotive and Diesel locomotive3. Fun Train4. Sightseeing Mini Train5. Tram
Delivery and ShipmentShipping by sea: Around 4 weeks to arrive.Delivery Time: Around 30 working days after receipt of deposit.MOQ: 1 set.Payment Term: 30% T/T deposit, 70% T/T before delivery.
WarrantyDiesel Track Train: 1 year full warranty,offer FREE components under EXW shipped term.
FAQ1.Q: Can I get some samples? A: Yes,sample order is available for quality check and market test.
Q: What’s the delivery time?A: It usually takes about 25 working days for production based on specifications for your order and quantity.
Q:What’s your payment terms?A: We usually accept T/T or L/C at sight as the main payment terms,andother payment can also be negotiated.
Q:What’s your warranty terms?A: We offer different warranty time for different components, please contact us for details.
Q: Do you have the train in stock?A: No,all ebikes will be newly produced according to your order including samples.
Q: Can I mix different models in one container?A: Yes, different models can be mixed up in one full container.
Q: How does your factory do regarding the quality control?A: Quality is priority. We always attach great importance to quality control from the very beginning to the end of the production. Every product will be fully assembled and carefully tested before packing and shipping.
Q: Will you deliver the right products as I ordered? How can I trust you?A: Yes, we will. The core of our company culture is honesty and loyalty. Our company has been audited and approved by SGS and TUV, assessment report will could be sent to you by email. If you check, you will see that we have never got any complaint from our customers.
Business Range: Auto, Motorcycle Parts Accessories, Industrial Equipment Components, Sporting Goods Recreation, Transportation
Company Introduction: Wuhan Haoxing Machinery Equipment Co., Ltd was found in 2013, located in “Eastern Chicago”Wuhan which is important industrial City, in the center of China. Wuhan Dising is a high tech company that covers an area of 16000 square meters, and integrates R D, Manufacture and Sales as a whole. After years of development, with our motto “high standard, high technique, high quality”, our team continuous seeking high cost-efficiency management mechanism, gradually formed a good working atmosphere, good culture, good working environment, and innovation-motivated team.
How Do I Make My Grass a Putting Green? A Step-by-Step Guide
Golf is not just a pastime for the retired, there are many players of all age groups that enjoy a good game of golf. Having.
Golf is not just a pastime for the retired, there are many players of all age groups that enjoy a good game of golf. Having access to a good golf course is essential for enjoying the hobby, but not everybody has the time to visit the greens in order to better their game. For those with a nice back lawn, however, creating a putting green for the home is a great idea. If you are interested in setting up a putting green, then below is a step-by-step guide on how to proceed. If you choose artificial turf, then FieldTurf Landscape is here to help.
Putting Greens
Putting greens have very specific requirements. If you want a USGA rated putting green, the grass cannot be longer than 0.125”. This requirement is tough for those looking to make putting greens for the home. A standard lawn mower cannot cut this low. This means, if you are going to install a natural grass putting green, you need to be comfortable with purchasing a rotary or cylinder lawnmower specifically for your green – if you are set on regulation play. Going natural can be difficult though, and could ruin your lawn, which is why artificial turf is often recommended by landscapers and golf enthusiasts alike.
Your first step is to choose the right area for your putting green. An area of your lawn that is very level will reduce work later, and good drainage is a necessity to avoid puddling in wet weather. Avoid any hills or steep slopes.
You will need to remove the current grass on the lawn in the area you want to transform into a putting green for your home. You’ll need to dig down 10-12 inches, and at this point you can add some contours, but no more than a 2.5% slope.
Drainage is the most important part of a green, especially if you are going for natural grass. Soggy putting greens can be damaged easily, so 4” perforated drainage pipes are ideal (in a herringbone pattern and covered in pea gravel).
Sand is the first layer in the hole. Add enough sand to get the right depth, then rake it to level out the sand as much as possible. When creating putting greens for your home, sand is an affordable and easy way to get the best drainage.
Using sod is generally the easier method if you are doing natural grass. Seeding natural grass, however, will be better in the long run, and you will want to use USGA regulation grass types. For natural grass, you will need to fertilize and water regularly and cut the lawn every other day to keep it at 0.125 inches. After 4-5 weeks you’ll be able to use a hole puncher and start practicing your game. If you are looking for the lowest maintenance option, artificial turf is a faster, more affordable and easier path.
How To Build A Backyard Putting Green
Building a backyard putting green may sound like a dream come true, but it takes dedication, expense, and longtime maintenance to see it through. If you decide to take on this challenge, it won’t be as good as a real putting green on the golf course, but you will be able to practice putting whenever the mood strikes.
Here are a few ideas for building a DIY backyard putting green.
Build Your Own Backyard Putting Green
To get started building a backyard putting green, you will need equipment for moving the earth, 4-inch (10 cm.) drainage pipe, grass seeds or sprigs, a reel mower, cups and flags, irrigation plan, fertilizer, and pesticide.
Apply the right fertilizer (at the right times).
Many people don’t give fertilizing enough thought and it winds up harming their lawn more than helping it. They may fertilize too often, not enough or at the wrong times. Or they may use too much, which can hinder root growth and burn the lawn.
Our fertilizing best practices:
Stop the weeds dead in their tracks.
You don’t want weeds on your lawn. They can rob your lawn of nutrients and sunlight, contribute to insect infestation and they’re just plain ugly! We’ve already seen that overwatering and cutting your grass too short can contribute to weed growth.
Our weed control best practices:
Don’t want to do it yourself? Leave it to the professionals.
The above tips are sure to help you grow a lawn that looks like a golf course green. Keep in mind that these are just the basics. advanced tactics like overseeding, aeration and dethatching are also important — but we’ll cover those in another blog post.
As always, the team at Brandon Rushing is happy to help. See our lawn care programs or get a free quote with our online pricing tool.
Written by Brandon Rushing, Founder President
Helpful Info from Our Experts
Fully powered, the Signature Series offers all the features of the Classic Cut plus quicker mowing time and virtually no effort. The powerful, rechargeable unit affords manicured greens at the squeeze of the handle.
Built Rugged to Exacting Specifications
- Built with All Steel Frame with Collapsible Tubular Handle
- All Steel Drive Train Guarded Sealed
- Sealed Bearings. No Lubrication Required
- Professionally Coated Parts for Corrosion Resistance
Ideal for: Home Putting Greens, Croquet Courts, Lawn Bowling Tennis, Golf Courses.
Hudson Star Signature Series Info
- 103 lbs.
- Built with All Steel Frame
- Collapsible Tubular Handle
- All Steel Drive Train Guarded Sealed
- Assembled Utilizing Stainless Steel Fasteners
- Sealed Bearings. No Lubrication Required
- Professionally Coated Parts for Corrosion Resistance
- 11 blad reel, balanced backlapped at the factory for 4/cuts per inch
- recharge batteries in 3-4 hrs
- operations/repair parts manual
Q: How much does the unit weigh? A: The Classic Cut weighs 82 lbs. The Signature weighs 103 lbs.
Q: What is the cutting height range? A: The cutting range for both units is 1/8″ to 3/4″. This allows for not only close golf course quality cuts, but allows trimming of fringe areas and tees as well.
Q: How hard is it to change cutting heights? A: It is very easy. The full cutting height range is accessed by simply turning a single hand knob. There are no bolts or nuts to loosen or tighten. There is no adjustment from side to side.
Q: How many blades does the reel contain? A: Both units are manufactured with an 11 blade reel. The reel is balanced and backlapped at the factory and gives approximately 4 cuts per inch.
Q: How easy is the Classic Cut to push? A: Properly maintained, the Classic Cut is easy to push and can be used by women and even fairly young children. Conditions such as dull blades or excessively wet or tall grass will increase the force necessary and will effect the quality of cut.
Q: How often will sharpening be required? A: Normally very infrequent. Conditions such as frequency of mowing cycles, condition of top soil, and frequency of top dressing can affect the condition of the blade. Both units come with a backlapping kit allowing the user to sharpen the cutting blades easily.
Q: Will the mowers catch grass clippings? A: Yes! Clippings are collected in our unique molded catch can. The can “clips” on the front of the mower allowing quick and easy dumping and reattachment.
Q: How can I transport my mower from my garage to the green since I have to travel over concrete, asphalt, stones, rougher terrain, etc.? A: Both mowers are manufactured with a unique multi-position handle assembly which allows the unit to be transformed into a transportation mode. Not only does it protect the cutting area of the mower, but it allows the unit to be used as a “smoothing” roller for the green.
Q: What about maintenance? A: Under normal conditions little maintenance is required. All materials are powder-coated or manufactured from corrosion-resistant materials. All bearings are sealed and the drive-train is enclosed requiring no lubrication.
Q: How soon can a unit be shipped? A: Normal shipping time is within 48 hours.
Q: Does the factory stock replacement parts? A: Yes.
Q: Do the mowers come with a complete and detailed owners manual including identification of all replacement parts? A: Yes!
Q: Should the mowers be cleaned after mowing? A: Normally light spraying with a water hose and lightly coating with something similar to WD-40 is sufficient.
Q: Is the Signature Series fully powered? A: Yes! Not only is the reel powered, but motion is powered also.
Q: How long will the Signature Series cut between charges? A: Once fully charged, the unit will cut approximately 50-60 minutes before it will need to be recharged depending on the conditions of the green.
Q: Do the batteries need to be fully discharged prior to recharging? A: No!
Q: How long does it take to recharge the unit? A: 3-4 hours.
Q: Will the charger shut off automatically when fully charged? A: Yes!
Q: What assembly is required when I receive the unit? A: Simply bolt the handle in place. The mower is ready for the green.
Q: How long does it take to mow a green with these units? A: Depending on the size and condition of the green, normal mowing time for most “home” greens would be approximately 10-20 minutes.
Masport Olympic Golf Bowling Green Petrol Cylinder Lawn Mower
The Masport Olympic Golf lawn mower has built a reputation amongst those “in-the-know” as one of the best mowers to use for bowling greens and golf greens. This is because Masport use only the highest quality components, so it will give years of service with minimal maintenance requirements. It’s rugged steel chassis provides outstanding longevity and provides a rigid and stable cutting-platform for a neat, uniform finish.
Other high quality features include a centrifugal clutch, which allows you to disengage the cutting-cylinder with the engine running, great when moving from site to site. Another major feature is the split differential rear roller, which adds manoeuvrability and reduces the likelihood of scalping. A very large capacity 70 litre collector is included.
The Masport Olympic Golf cylinder mower also features and extremely low minimum cutting height of only 4mm. Thats close enough to achieve a perfect bowling green finish.
- Engineered to Last. Masport mowers are one of the best selling, most popular choice for people because they are strong, durable and will never rust.
- Quality hand built consruction
- Self-propelled. Let the Mower do the work with this self propelled Masport lawnmower
- Split differential, heavy steel rear roller for classic striped finish
- 10 bladed cylinder which has the ability to achieve extremely low cutting heights.
- Independent roller cylinder drive
- Cuts as low as 4mm for a really neat, close finish. Ideal for bowling and golf greens
- Reliable and dependable engine from Briggs Stratton 163cc
- Large capacity front mounted plastic grassbox included (70 litres)
- Solid METAL GEARS AND DRIVE CHAINS!
| Masport |
| Petrol |
| Briggs and Stratton OHV IC50 163cc |
| Briggs Stratton |
| N/A |
| Recoil |
| Rear Roller |
| Steel |
| 50 cm |
| 4. 30mm |
| Stepless Micro-adjust Knob |
| Self-Propelled |
| 70 Litres (Plastic) |
| 78 kg |
| 2 years domestic / 90 days commercial |
| For Ornamental and Prestige Domestic Lawns, bowling greens, putting greens and more |