Winding the Grass On the Grass Trimmer
Review of the best edited by Experttology.Ru. About the selection criteria This material is subjective, it is not an advertisement and does not serve as a buying guide. It is necessary to consult with an expert before purchase.
Country house owners need a gas grass trimmer to keep their personal plot in perfect condition. This mobile equipment can operate on uneven surfaces, near fences and foundations. At the same time, the shrub trimmer can handle not only soft low grass, but also weeds and bushes. On the Russian market there is a wide range of gas trimmers. They differ in cost, performance and maneuverability. To choose the right model for your site, you should follow the recommendations of our experts.
Suggestions
Intensity of use. It is best to start the search for a gas grass trimmer with the destination.
- If the cottage is small, the grass can be often mowed, you can settle for inexpensive and compact household models. If it is necessary to periodically transport the hedge trimmer, preference should be given to folding models.
- Owners of large plots of land (over 20 acres) need reliable professional equipment. It can work long with the tallest grass or can be used to remove bushes.
Type of gasoline engine. Grass trimmers are equipped with two types of gasoline engines.
- Two-stroke engines feature low cost and simple design. But every time you fill up the fuel tank, gas must be mixed with engine oil.
- Four-stroke engines appeal to potential customers with their ease of operation. Gasoline is poured into the fuel tank and oil is poured into the engine. But such power units are more expensive, they will be more difficult to repair.
Power. The engines of shrub trimmers vary in power.
- The most productive are grass trimmers with engines of 2.5-4.0 liters. With participation of. Most often such units are placed on professional equipment.
- Lightweight models with 1.0-2.0 liter engines are suitable for the elderly. With. This tool can cope with small grasses, as well as with the processes of raspberries, blackberries, plums.
Convenient operation. Since mowing can take a long time, some useful features will help reduce operator fatigue.
- The anti-vibration system is an integral part of professional gasoline-powered harnesses. Thanks to the rubber shock absorbers, vibration from the engine does not reach the operator’s hands.
- Shoulder strap should distribute the load evenly on the operator’s body. When buying, you need to pay attention to the ease of adjustment and the convenience of removing and adjusting the belt.
- The degree of hand fatigue depends on the design of the handle. The two-piece U-shaped handles are best adjusted. Each one easily adapts to the hand.
Features of trimmers application
Grass trimmer mowing with a fishing line can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, row spacing on the garden plot.
Such a convenient, and most importantly, effective device, as a grass trimmer, exists in several variations:
As the names make clear, the types of grass trimmers differ markedly from one another. But regardless of the type of this tool, its cutting element can be a line for the trimmer. Of course, the grass trimmer fishing line tucked into the grass trimmer reel is not endless. And sooner or later it will be necessary to replace it with a new one.
Consumption of fishing line depends on how often the device is used and the amount of work performed. The more grass is mowed and the more often it is trimmed with the grass trimmer, the more active it consumes fishing line for the trimmer. And, accordingly, the sooner it will run out. This raises the question: how to tuck the line for the trimmer into the grass trimmer reel?
Not everyone knows the answer to this question. And after all, the winding of fishing line on the spool plays an important role in the work of the grass trimmer. For the device to function properly, it is very important to properly wind the new line for trimmer on the spool. On how to change the line for the trimmer on the trimmer, and will be discussed in this article.
What line to choose for your trimmer
Before you stock up on this material for the grass trimmer, you need to decide on the choice. After all, the usual so-called round line for trimmer is not the only type that exists. How to choose the most suitable one?? First you need to determine the working conditions.
Choosing by type. A line for trimmers with a circular cross-section is the most common. It will fit any reel, with very few exceptions. This kind of material is suitable for mowing fresh, lush grass. But it may not be able to mow so-called dry weeds. Attempting to mow shrubs with this thread is needless to say.
In addition to the usual type, there are others with sharp edges. They are usually made in a “star” or “square” shape. The presence of sharp edges is the main feature and the key difference between these threads.
It is thanks to this feature that these types of threads are able to mow dry weeds. But sharp-edged threads are not without disadvantages, the main of which can be called fast wear and tear and strength, which is noticeably inferior to the round type.
In addition to the already mentioned line types, there are other interesting and frequently encountered varieties. Among them special attention should be paid to cords with a metal wire inside them. Threads of this type are often used in tools that run on gasoline and have an engine with more than one and a half horsepower.
Threads with a metal core come in both round cross-section and with sharp edges. Regardless of the cross section type, such filaments are best suited for overcoming hard-to-cut plants. Filaments of this type can easily mow not only dry grass, but even small bushes.
Filaments with wire inside compare favorably with other types of consumables for their incredible durability. But unfortunately, this feature has more than a noticeable effect on the price of this type. The cost of filaments with a core is much higher than the cost of other types of filaments.
Choosing by thickness
In addition, special attention should be paid to the thickness of the consumable material. For mowing young grass, a thread with a diameter of one and a half millimeters is suitable. The larger the diameter of the thread, the drier and coarser the weeds it can handle.
There is a “but” in choosing the thickness of your line. It is important not only to evaluate the capabilities of the material, but also to consider the characteristics of the grass trimmer. It is necessary to look in the user’s manual, which is attached to the tool, and find information about the requirements to the cutting element.
Using the wrong filament can cause the tool to malfunction. Using too thick a thread would overload the motor of the device. And using too fine a thread will greatly increase wear and tear on the torque mechanism.
That is why it is necessary to approach to a choice of a consumable not less responsibly, than to its filling in the trimmer for the grass. When a suitable line for the trimmer is found and purchased, you can begin to consider ways of winding it on the spool.
How to wind a line for trimmer on the grass trimmer reel
The line for the trimmer in the trimmer head can run out at the most inopportune moment when you’re in the middle of your work. To change the fishing line without much time and understanding the instructions, we recommend to get acquainted with this process in theory beforehand. From our article you will learn all the subtleties, starting with the choice of consumable material and ending with winding on different types of spools.
For each trimmer, the manufacturer recommends a line for the trimmer, or cord, of a certain diameter. the spool is made for it. It can be from 1.2 to 4 mm: you need to look at the instructions to see what size of line is allowed for your tool. For example, many trimmers have a maximum value of 3 mm (recommended for hard grass). a thicker cord cannot be installed. A thin trimmer line with a diameter of 1.2 to 1.6 mm is suitable for mowing young, soft vegetation. Also when choosing, pay attention to the structure of the cord: round is the strongest and suitable for coarse grass, curly. for soft, twisted or notched. for thin stems. Depending on what kind of grass grows on the plot. lawn or weeds, buy the appropriate expendable material. The length of the coil can be several tens of meters to several hundred meters, and its price depends on it. The amount of work to be done should be taken into account. If the grass trimmer is used in a private household, there is no need to buy a roll of more than 100 meters.
Important to know! Buy only branded line for the trimmer, recommended by the manufacturer of the trimmer for grass. It is made of quality materials and is durable. it will cut the grass perfectly and will not wear out so quickly.
For one filling of the line in the bobbin a piece of 2 to 4 m is necessary. it all depends on the thickness of the line and the manufacturer’s recommendations. If you wind more cord, it will be harder to move and you may have problems pulling the new ends out while you’re working. Unwind the desired amount and cut with a knife.
Useful tip: put a piece of filament in water for 30 minutes, then it will become more elastic and stronger.
To insert the trimmer line into the trimmer head, you must remove it from the tool. Depending on the design, this can be done by pushing on the catches or unscrewing the knob. Pay attention to the direction of the thread. right or left. and depending on this turn the knob. The direction of rotation is usually indicated by an arrow on the trimmer head body. We recommend wearing gloves for this operation to prevent slipping of the fingers and getting your hands dirty.
Disassembling the trimmer head
line for trimmer is wound on a bobbin, which is hidden in the body of the trimmer head. To get to it, you need to disassemble the element. There is a clip on the housing, and you can easily remove the lid by pushing on the latches. Sometimes you can disassemble it by unscrewing the bobbin case.
Be Careful! Note the order in which the elements are installed, the way the spring and the fixing screw are located inside the head. Carefully stack all parts in one place so you don’t lose anything and have no problems reassembling.
Trimmer heads are differentiated by design, type of spool and line drawing. Once you disassemble the housing you will see the bobbin and determine what type it belongs to. There are products with a separating lip in the middle which divides the spool into a top and a bottom for each end of the line. Without a spacer, the bobbin is wound solid. To make the process clearer we suggest using the table.
Reeling line on different types of spools
With separating bead
Without separating bead
We described how to wind the line for trimmer in the grass trimmer spool with two tendrils. This is the most common option. But there are other ways. For example, if the mowing head has only one bar, you wind it without folding the line for the trimmer. Rotate in the direction indicated on the bobbin case and temporarily fix the free end of the filament in the slot on the case. For trimmers with four tendrils, the consumable material is four short pieces, which are inserted in turn into the holes of the already assembled head.
Useful tip: when winding the fishing line carefully, do not overtighten it so that it does not sit very tight in the spool. It must be able to move freely so that it can be pulled out at a later time.
Assembling the trimmer head
After the line for the trimmer is wound on the bobbin, it is necessary to assemble the body. Position the spool so that the line ends can be pulled into the exit holes of the trimmer head. Slots in the bobbin where they were temporarily inserted prevent them from slipping out. If there are no such slots, hold the ends with your fingers when you place the reel in the housing. After pulling the loose ends into the exit holes, close the cover and fasten it with clips or screws. Attach the mowing head to the grass trimmer and extend the line ends to the correct length so that they do not touch the blade guard when working. Done! You can start to work!
Thus, theoretically knowing the algorithm of line replacement in the trimmer head, you can easily and quickly cope with this task. The main thing is to take your time and look closely at the bobbin design before you replace it for the first time. If you have trouble disassembling the housing, you can always refer to the instruction manual, which lists the locking mechanisms. This will help prevent accidental damage. Buy a line for the trimmer and other trimmer consumables in our online store.
How to mow the grass in a cottage
Today we will talk about the first garden power tool from the big set, which I got in the country house. cordless trimmer Greenworks with brushless motor.
Fight back against the weeds, get our yard and neighborhood in order. Let’s go!
So we have a cordless grass trimmer Greenworks GD40BC, a battery charger and two batteries with 40 volts and a capacity of 4 Ah. All of these components are sold separately, because.к. The charger and batteries are universal to all power tools in this series, so there’s no need to buy them again if you already have them.
This grass trimmer model refers to semi-professional equipment. This is not an amateur trimmer, but not continuous use for 8 hours a day. In essence. the golden mean for efficiency, usability and reliability. The grass trimmer assembled with the “big” 4 Ah battery weighs about 7 kilograms.
The heart of every power tool is its motor. Here it is a high-efficiency brushless motor from the DigiPro series. At its peak, it can deliver up to 1 kW! The great advantage of a brushless motor over a conventional brush motor is the fully electronic control with power regulation (it increases automatically when the load increases), no rubbing parts (brushes), higher torque, and quiet, vibration-free operation.
As the power is used batteries made of battery assembly size 18650. The battery has 20 batteries connected in series and in parallel (2×10). With a total battery capacity of 4 Ah and a weight of 1.3 kg. Also in this series there are batteries of half capacity, 2 Ah, they are also compatible with the tools from this series, but in the case of the trimmer you will have to adjust the weighting for batteries with different capacity.
And this is how the battery mounted on the charger looks like. Voltage: 40 volts, charging current: 2.2 A. This is a low-power charger, so the time to charge a 4 Ah battery is 120 minutes, and to charge a 2 Ah battery you need about 1 hour. By the way, the 80 and 82 volt Greenworks tool series uses a more powerful charger with forced cooling (this reduces the charging time by more than half). But in practice it isn’t critical (besides the charger without forced cooling doesn’t make noise). The charger itself can be hung on the wall, in this form it is much more convenient to use. The battery that is installed on the charger is locked with a latch.
Let’s go to the control elements. The start button is blocked from accidental pressing, the force on the locking spring is ideal. you can not accidentally turn on the grass trimmer, but keeping the button constantly pressed does not strain. Next to the handle, there is a three-segment operation mode indicator, on/off button and high-rpm selection button (10,000 rpm). Red light informs about low battery.
The D-handle has a comfortable grip and there is also a thigh support bar (left), which is quite rare for trimmers. It is designed to reduce the weight of the grass trimmer on the shoulder. By the way, the D-handle is connected to the bar via a rubber damper, which seems to reduce vibration, which in fact brushless motors do not have. The shoulder strap has a swivel joint that can be moved across the shaft to adjust the weight to the operator. It is locked in place with a screw. For storage, the bar can be detached and the grass trimmer takes up half the space.
A grass trimmer set up properly for the operator looks like this.
Cutting head has a working diameter of 360 millimeters and is equipped with a semi-automatic line feed. Every time you start the grass trimmer, the trimmer line extends about 2 mm, and by lightly tapping the head on the ground (during the stop) you can extend the trimmer line to a longer length.
Diameter of the line used is 2 mm. This line enables trimmer to mow even very thick bushes effectively. The trimmer line is factory-fitted with a round-cut line, but a square-cut trimmer line with sharp edges is available for improved performance. Also trimmer comes with a steel disk. shrub trimmer. It is designed for clearing territory from thickets of small bushes, which can not cope with a flexible line trimmer. Iron disc rotating at 10,000 rpm is a very dangerous thing.
Eye protection is mandatory when working with the trimmer! And you can not be without eye protection within 10 meters of the operator. Grass trimmer is convenient to work in dense thickets, as well as on flat areas. Here I hold the grass trimmer with my left hand by the bar, which is designed to rest on my hip, in some situations this might be more comfortable than the D-handle.
Particular attention should be paid to the gearbox, located on the shaft of the grass trimmer. It uses a gear mechanism to transfer the torque to the trimmer head, which is positioned at an angle to the axis of the electric motor. Among other things, the bourgeois can change nozzles. I saw a hedge trimmer, a blower and something else. That is a standardized power take-off shaft. On some budget models of trimmers make a curved boom, in which the drive rope not only deteriorates quickly, but also adds vibration during operation. It is very interesting to observe how the motor power automatically increases when the load increases (in thickets). The peak power of the electric motor is nearly 1 kW, but of course this power is only used occasionally. A full charge was enough to get me through 1 hour of mowing on the property, along the road and in the area bordering the forest. And even after that, the battery still had one battery out of a possible four bars. If the area to be trimmed is larger, there is always a spare battery that can continue to be used while the first one recharges. This way you can work practically non-stop, but do not forget that the engine needs breaks as well.
By the way, there are a few secrets that will allow you to work more effectively with the trimmer. For example, tall grass needs to be mowed in two passes to get the cuttings wound around the shaft.
How to change a line on a trimmer
When choosing a line for your trimmer, you should also consider the type of motor. If the thread is too large, the resistance to rotation will increase, respectively, the motor will constantly overheat and will soon fail. Let’s consider all the features of filling the fishing line into the grass trimmer reel, the video instruction will help to do all the work correctly.
Recommendations on how to change the line for the trimmer on an electric trimmer
Before you charge the line for the trimmer in the electric grass trimmer, it is necessary to choose the correct cross-section of the thread:
- for the model with a motor power of less than 500 watts is suitable cord with a diameter of 1.3 mm or 1.6 mm;
- for power more than 1 kW, choose the consumable material with a cross section of 2 mm.
To understand in more detail how to wind the fishing line for a trimmer on the reel of an electric grass trimmer, the following will help
Some tips on how to change fishing line on a gasoline trimmer
Many users specify how to correctly wind the line for the trimmer for grass trimmer, working on gasoline. For this model, you should pay attention to the shaft mower:
How to quickly change a line in a trimmer reel to disk
Depending on the complexity of mowing, you can install a disc of metal or high-strength plastic.
How to choose
Intensity of use. The best place to start looking for a gas grass trimmer is at the destination.
- If the cottage is small, the grass can be often mowed, you can opt for inexpensive and compact home models. If it is necessary to periodically transport the hedge trimmer, preference should be given to folding models.
- Owners of large plots (more than 20 acres) need reliable professional equipment. It can work long with the tallest grass or can be used to remove bushes.
What kind of petrol engine? Grass trimmers are equipped with two types of gasoline engines.
- Two-stroke engines are low cost and simple design. But every time you fill the fuel tank, the gas must be mixed with motor oil.
- Four-stroke engines attract potential customers with easy operation. Gasoline is poured into the fuel tank, and oil is poured into the engine. But such power units are more expensive, they will be more difficult to repair.
Power. The hedge trimmer motors are differentiated by power.
- The most productive are grass trimmers with engines of 2.5-4.0 liters. Involving. Most often such units are placed on professional equipment.
- Lighter models with 1.0-2.0-liter engines are suitable for older people. With involvement. This tool can handle small grasses as well as raspberry, blackberry and plum processes.
Comfortable operation. Since mowing can be time-consuming, some useful features help reduce operator fatigue.
- The anti-vibration system is an integral part of professional gasoline-powered wickets. Thanks to the rubber shock absorbers, vibration from the engine does not reach the operator’s hands.
- A shoulder strap should evenly distribute the load on the operator’s body. When buying, you should pay attention to the ease of adjustment and the ease of belt removal and adjustment.
- Hand fatigue depends on handle design. The two-piece U-shaped handles are best tuned. Each one is easy to adjust to your hand.
Rating of the best gas trimmers
Husqvarna 545rx
Husqvarna 545RX Professional Grass Trimmer has a sturdy design with a rigid 32mm diameter rod. Torque transmission from motor to cutting head is provided by 9-mm-thick shaft. Experts note the ease of starting the engine, you can even start it by weight. Clean air entering the combustion chamber is ensured by a filtration system with centrifugal pre-treatment. The lawnmower is well-suited to the bottom, high torque output (9000 rpm) of the 2.8-litre engine. With. Model activity should include good maneuverability and complete equipment. the grass trimmer wins gold in our review.
Russian owners of the Swedish brush brush like its reliability, durability, high performance. Of the disadvantages is the high price of the model brand.
Makita EM4351UH
Almost as good as its power (2.0 l.С.) to the winner. Makita EM4351UH gasoline trimmer. High-speed engine (10,000 rpm) allows you to make grass trimmers 43 cm wide. Specialists pay attention to the four-stroke engine, which produces a fairly soft sound without high frequencies. The equipment is easy to start, the manufacturer has installed a decompression valve, so it is enough to start. Experts really liked the unloading of the braid, the operator does not even feel the weight (8.6 kg) of the grass trimmer. Vibration damping system also deserves praise. Model gets the silver of our review.
Users appreciate the brushcutter for its power, easy start-up, acoustic comfort. Their disadvantages include inconvenient transportation and mediocre instructions.
Oleo-Mac 741
Experts consider the Oleo-Mac 741 grass trimmer a professional gasoline specialist. The model can work both with a fishing line with a diameter of up to 3 mm, and with a knife with three blades. The machine is driven by a 2.1-liter two-stroke gasoline engine. With. Speed of rotation reaches 11000 r / min. With the help of Italian gasoline mowers can mow grass on an area of about 50 acres, remove bushes and weeds with thick stems (up to 2 cm). The device comes with a backpack-type strap that has a hip and chest support. Grass trimmer resistance to constant stress is ensured by the magnesium housing. The manufacturer installed the Easy-On system for easy start-up.
Although the grass trimmer is inferior to the review leaders. Owners are happy with good equipment, power and competent suspension.
ECHO SRM-350ES
Country property owners are especially interested in the Japanese gasoline grass trimmer Echo SRM-350ES. The model combines reliability, performance and an affordable price. Experts consider the shrub trimmer a good device for the care of dachas or rural homesteads. In terms of power (1.47 l.С.) Grass trimmer inferior to the leaders of our review, but it is enough for home use. The technique can cope without problems, both with fresh grass and with coarse vegetation. The manufacturer has provided the possibility of installing a knife, but the cut stems fall on the cutting head, which complicates the work. The model stops one step away from the prize podium.
Russian users are satisfied with the power, ease of use, reliability. Of the disadvantages note the noisy operation of the engine and a large weight (8.3 kg).
STIHL FS 250
Traditionally high demand in the European part of Russia is observed for gasoline-powered equipment of the German company STIHL. The manufacturer’s catalog also finds a place for the professional grass trimmer FS 250. Specialists note the high quality of assembly, powerful engine (2.15 l.С.) and a comfortable shoulder strap. The model has been evaluated by professional foresters, road builders, gardeners. To make starting the engine easier, the manufacturer has installed the ElastoStart system. The use of rubber shock absorbers minimizes the impact of vibrations on the operator’s hands. However, the kit does not include headphones and rod head.
Installation of a metal rope: pros and cons
The most common thing, on the subject of “What to replace the line for grass trimmer trimmer?”, is the use of steel rope. In fact, in terms of efficiency, the metal cable is much better than the standard version. It is almost wear-free and cuts the grass just as well. And yet it is necessary to understand that manufacturers do not just use a polymer line for the trimmer, but not an iron rope for a reason.
Unfortunately, the downside of wear and tear is increased wear and tear of the lawnmower’s transmission. Due to the fact that the line for the trimmer tears, it does not overload the mechanical part of the device, but simply wears out as it is used.
If you want, you can use a steel wire, but it is important that the wire does not touch the blade guard in the process of work. The ends of the cable need to be welded to keep them from unraveling.
Installing plastic couplers: pros and cons
If the line for the trimmer suddenly runs out during work, and there is still a lot of work, it is not necessary to look for a new one. Plastic clamps can temporarily perform its function. They are quite stiff and are able to cope with almost any grass.
The disadvantage is the rapid wear and tear. The effectiveness of plastic clamps, in such a non-standard application, is also low. Nevertheless, this alternative can always be used.
Installing plastic couplers: pros and cons
If the fishing line for the trimmer suddenly runs out during work, and there is still a lot of work, it is not necessary to look for a new one. Plastic clamps can temporarily perform its function. They are quite stiff and can cope with almost any grass.
The disadvantage is the rapid wear and tear. The effectiveness of plastic clamps, in such a non-standard application, is also low. Nevertheless, such an alternative can always be used.
Fishing line installation: pros and cons
Sometimes an ordinary fishing line for trimmer is installed in the drum of the garden trimmer for grass, instead of a special one. it’s just a waste of time. Fishing line for trimmer is too soft and washes out many times faster than the traditional version. It can really mow the grass, but such a non-standard application for it is poorly suited. Fishing line for trimmer can be used only as a spare if nothing else is at hand.
It is also worth considering that it should be thick enough. It is better to insert a trimmer line at least two millimeters thick into the lawnmower. By the way, there may be difficulties with its installation, if the grass trimmer model provides winding on a spool.