Grass trimmer how to tuck the line

Trimming the line into the trimmer.

I want to devote today’s article to the sore subject of summer residents and gardeners of the entire post-Soviet space “How to fill the line in the trimmer.” Not many trimmer manufacturers answer this question in their instruction manuals. Therefore, it is also difficult for simple gardeners to figure out how to do it correctly.

I want to start with a brief description of the technical characteristics of the trimmers.

So, trimmers are electric and gasoline. The cutting element for trimmers can be a line and a knife. The line is ordinary, four. pentahedral and intertwined (in the form of a pigtail). Knives come in 2, 3 and 4 bladed knives. Knives also come in plastic and metal.

The line feed system from the trimmer is manual, semi-automatic and automatic.

The development engineers who create new models of trimmers accurately calculate the diameter (thickness) of the line and the number of knife blades, according to the power of the trimmers. Otherwise, the engine is overloaded, resulting in damage to the engine. And these are additional and significant costs.

Trimmers on the market today:

With one nozzle. only a line.
With two nozzles. a fishing line and a three-four-blade knife.
With one nozzle. only three to four blades.

Our Kulibins have long ago learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacement of fishing line with a metal cable, or fishing line. But at the same time, they do not think about the safety of their own and their loved ones, because, like a cable with the power of a working trimmer, it can easily break out and not only injure the mower and others, but leave him crippled for life. Using a fishing line can and gives a better effect, I have never personally tried it than a trimmer line, but such work has a number of inconveniences: when it comes into contact with hard objects, it loosens or can simply be pulled out of the reel without limit.

So, what is called closer to the topic. Here is an example of how to thread the line into the trimmer (Trimmer Bosch Art 30). Everything is very simple. Started.

After you have chosen the line for refueling, you need to cut off the required amount of line, because all the line in a skein will not be wound into a reel.

Cut off and start reeling.

Remove the coil and the protective cover from the coil.

They took it off. We fix one end of the line in the gap and carefully and evenly wind the line.

The amount of line should be such that the protective cover of the reel closes and the line on the reel unwinds a little by itself.

We put the other end of the line into the hole on the protective casing.

Next, we take the coil and the protective cover of the coil. We squirt the end of the line from the reel into the metal hole on the reel’s protective cover. Tighten the line a little.

We put it all on the trimmer. Turn the coil clockwise until it clicks.

They fixed it. Now we connect the trimmer to the network. We put the trimmer in the starting position for work. We turn on the trimmer. Excess line length will be cut on the trimming blade.

Coil in trimmer

That’s all we start to work.

Thick line

It is stored at the top of the trimmer body.

Storage space for spare coil

It is very simple to install such a fishing line into the reel. according to the internal scheme inside the reel. We insert the center of the line with a metal mount in the upper part of the reel, and draw the ends of the line along the grooves and bring it out.

In addition to the standard lawn line, my trimmer also has a thick line for cutting rough weeds. It has the shape of a pigtail, i.e. three lines are tightly intertwined. This line has its own spool.

Heavy-duty line in a reel

Such a reel is attached to the trimmer in the same way as a reel with an ordinary line.

Line adjustment

It also happens that sometimes it is not worth puzzling over how to fill the line into the trimmer, since it is enough just to adjust the line as necessary, thereby increasing work productivity. Alternatively, the cutting element can be cut with a knife if it protrudes too much. But the length can also be adjusted right in the process of mowing vegetation, gently touching the head of the fishing line to the floor. But this can be done only if the material extends beyond the coil by at least 3 centimeters.

One of the main rules when replacing and adjusting equipment is that any manipulations with the mechanism should be carried out exclusively with the engine off and the device plug disconnected from the mains.

Perhaps these tips will tell you how to tuck the line into the trimmer as correctly as possible and, accordingly, give your site a neat and aesthetic appearance. All that is required is to correctly select the cutting material required by the type and, of course, to determine the category of the most used trimmer.

Near the house he always looked well-groomed and neat, he must be cut regularly. Fortunately, modern technology allows you to solve this problem without excessive physical effort. Electric trimmers are so easy to operate and maintain that even a teenager can use them to mow. The main thing is to figure out in advance how to fill in the trimmer.

Line winding

Threading the line into the trimmer spool is a relatively simple procedure, provided you follow a specific procedure. When you need to determine how many meters of consumable is enough, wind it around the bobbin so that the skein does not exceed the diameter of the sides. Having decided on the length of the cord, follow the instructions below:

  • Fold the consumable in half so that one end of the line is 10-15 cm longer than the other.
  • Charging should be started from the center board, which divides the trimmer bobbin into 2 parts. Find the groove where the cord should be inserted. Bend the last in half.
  • Determine in which direction you want to wind the line. To do this, take a closer look at the bobbin, which may contain an arrow or an inscription. She indicates the side of the winding. If there are no markings on the reel, then look at the arrow on the mowing head. wind in the opposite direction.
  • The consumables should be washed carefully, turn to turn. Try to stick to the maximum thread tension.
  • After completing the lining, secure the short end of the material first. To do this, insert it into a groove on the side of the coil that fits in diameter. The other end (longer), attach in the groove on the other side of the trimmer bobbin.
  • After securing the fishing line, cut off the ends. Do not forget to leave allowances of about 10 cm.
  • Place the loaded bobbin onto the mowing head of the device. To do this, you need to alternately insert and pull the thread into the outlet holes of the head, in order to then place the bobbin of the device into the skin.
  • Using the required force, pull the cord out of the locking grooves and tighten the material. After completing this step, put on the cover and secure it with the latches.

Step-by-step winding of the line to the spool
You can also wind the cord on the trimmer in another way, in which two pieces of material are charged instead of one. The replacement is done like this:

  • Bend one end of the cord into a crochet hook.
  • There should be a hole at the bottom of the bobbin to hold the line in place. Insert the bent end of the thread there.
  • Wind the cord material in the direction of the arrow to the desired level, which does not exceed the diameter of the trimmer spool.
  • Do the same for the second bobbin compartment.
  • The assembly of the device head is similar to the first method.

How to wind the line onto the Patriot trimmer reel?

Almost every beginner when using a trimmer is faced with the problem of changing the line. While it is very easy to change your line, you need to learn how to do it correctly. Changing the fishing line with proper skill will take no more than five minutes. you just have to constantly practice it. This article will look at changing line using Patriot trimmers as an example.

Removing and disassembling the coil

The mowing trimmer head consists of a cover, a spring (not available in every model), a bobbin with a cord, and a cover. Before proceeding with the disassembly of the coil of the electrical unit, be sure to disconnect the trimmer from the mains. The disassembly method depends on the attachment of the mowing head. First option:

grass, trimmer, tuck, line
  • To remove the cover that covers the inside of the head, press on the latches (latches) that are located on both sides of the head.
  • Remove the cover, under which you will see the spool. remove it from the body. Some trimmer spools have a spring under the bobbin, which must also be carefully pulled out.
  • After removing the bobbin, you will see a screw in the center of the case. Unscrew it with a screwdriver.
  • After removing the fasteners, take the body of the part and, shaking it in different directions, remove the gearbox from the shaft.

In the second version, the trimmer head is screwed onto the gearbox shaft. To remove it, you need to fix the shaft. For this, such devices have a hole through which a thin screwdriver or metal rod is inserted. Brief instruction:

  • Insert a screwdriver into the special hole, then lock the shaft.
  • Grasp the body of the head and start twisting it. This should be done clockwise, since the thread on the shaft is left.

Winding the line to the reel

How to Tuck Line Into the Trimmer Spool

Spool Trimmer Heads

The main elements of the trigger is the mowing head, which is a cylindrical body with a bobbin inserted inside. The fishing line (cord) is tucked into it. The heads differ from each other in the way of feeding and threading the cord. There are three types of heads in total:

  • Automatic. The line is then fed as the user decreases the engine speed. Automatic cord feeding is very convenient when there is a lot of work to be done. The disadvantage of such a head is the high thread consumption.
  • Semi-automatic. The use of such a head does not require the user to perform any complex manipulations. The principle of its operation is designed in such a way that the line begins to automatically lengthen while the trimmer is operating at full speed. You just need to lightly bang the head of the machine on the ground (this will remove the blocking of the line), and the cord will be pulled out of the bobbin due to centrifugal force. Then the line is cut to the required length with a knife, which is located on the protective casing.
  • Manual. To lengthen the cord, it is necessary to stop the apparatus. After that, the line will need to be pulled out manually.

Types of trimmer spools

Line selection

For the threading of the line into the trimmer head to be successful, it is important not to miscalculate with the choice of consumables. The thicker the cord you tuck in, the thicker and tougher the grass it will be able to cut. Often a universal line is used, the diameter of which is 2 mm. You can choose a diameter suitable for the mower in the following ways:

  • Refer to the instructions that came with the trimmer for line thickness information.
  • Pay attention to the bobbin itself. Sometimes information about the possible diameters of the fishing line is applied on it.
  • Another option is to try inserting the cord into the exit hole. If it easily goes through it, then the selected line diameter is suitable for use.

Trimmer reel
You can choose a cord thread according to the type of engine. If the line is too thick, then the resistance to rotation will increase. in this case, the engine will overheat and will soon fail. Helpful hints:

  • For an electrical device with a motor less than 500 V, a 1.3 mm thread is suitable. If you can’t find one, then you can use a 1.6 mm line. If the power is more than 1 kW, then select a cord with a diameter of 2 mm.
  • With a petrol trimmer, the shaft mower matters. For the folded version, a 2 mm cord is often used. If the shaft is straight, use a 2.4-2.5 or 3mm thread. The thickest line is installed on powerful devices. from 1.3 kW.

Pay attention to the type of section of the cord thread. Some popular options:

  • The most common round lines. They mow fresh grasses well, but they cope worse with shrubs, dead wood.
  • Twisted (spiral) cord is not very strong, but is good for thin young grass.
  • Serrated thread with sharp edges is ideal for large weeds in a neglected area.
  • You can mow your lawn more evenly with rectangular, star or square trimmer lines, but they are not very strong.
  • Strongest. two-piece inner-core round cord.

Types of trimmer line
Please note that you cannot use wire, metal strings and cables, as well as ordinary fishing thread instead of fishing line. The device will be dangerous to both the user and others. So the cable or similar products will gradually begin to work, as a result, their ends will unravel, and small pieces will scatter at high speed.

How to load the line into the trimmer?

So, our task is to properly load the line into the trimmer. Let’s take a closer look at where to start its implementation and what pitfalls can await us in the process.

Step 1. choosing the line

Step 2. remove the coil from the trimmer

To perform this operation, the trimmer must be disconnected from the mains and turned over with the working head up. The further course of action depends on the trimmer model and the design of the coil itself:

  • for small trimmers with a lower engine, press the keys on the sides of the coil and remove its upper part from the head;
  • on trimmers with a curved bar, we clamp the coil body with one hand, while simultaneously turning the winglet located on the body counterclockwise;
  • for trimmers with a straight bar and a gearbox, insert a screwdriver into the hole located under the coil, and then turn the coil body counterclockwise.

Step 3. disassemble the coil

After the coil is removed from the head, it must be carefully disassembled. It is better to do this on an already mown area, since there may be a spring inside the coil, which will be quite difficult to find in tall grass. After disassembly, we will have three parts on our hands: the body (top cover), the protective casing and the coil itself.

Step 4. measure the required amount of fishing line

Newbie mowers are usually interested in how many meters of line to wind on the trimmer reel? There are two ways to solve this issue:

  • Unwind a skein of line on a flat, dry place and separate half of it.
  • Measure 3-4 meters of line from the skein.

In any case, after the end of winding, the turns of the line should be on the body of the reel, without sliding off it. You don’t need to try to wind as much as possible, as the line will unwind poorly and break more often.

Step 5. winding the line onto the reel

How to attach the line to the trimmer depends on the coil design. Consider the option when the reel body has one outlet for the line. In this case, the end of the line is clamped in the crevice of the coil, and then we wind the line, trying to lay the turns as tightly as possible. The direction of laying the turns should be opposite to the direction of rotation of the coil and is usually indicated on its inner part. After the end of winding on the reel, you must put on a protective casing and bring the end of the line into it.

If the reel is designed to work with two tails, then the line must be folded in half and laid in the groove in the center of the reel. Further winding will be carried out along one or two slots, depending on the design of the coil. The direction of winding must also be opposite to the direction of rotation of the coil. At the end of the ponytail, the line will also need to be led out into the holes on the top of the reel.

Despite the fact that gardening equipment has been used for quite some time, it is still a novelty for some owners of private houses. That is why there are often questions about how to properly wind the line on or a gasoline trimmer.

This is essentially a simple operation, but all its stages must be performed correctly in order to achieve the desired result. over, in the operating instructions, only a few manufacturers provide an answer to this painful question. Explore the article and find out how the line winds on the trimmer reel.

What is a trimmer?

This equipment is based on the following elements:

  • a motor whose main function is to rotate the cutting head at the end of the rod;
  • directly the head, consisting of a coil, on which either a fishing line or a knife can be wound;
  • knives or fishing line rotating at high speed, which are the main cutting part of the device, how to load the fishing line into the trimmer will go a little further.

An electric device is inferior in its power to a gasoline one, so it is ideal for working on a standard plot of land that is adjacent to a house with source of electrical energy. The main positive aspects of such equipment are the absence of noise during operation, light weight, ease of use and, of course, environmental friendliness.

As for gasoline trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any area. There is no need to use electricity here, which has a positive effect on the functionality of such an apparatus. the cutting attachments can be changed, working with weeds of various types.

One of the most common attachments is the fishing line, so you should dwell on this element in more detail.

Types of trimmer line

As a rule, line separation is based on different sample diameters, which can vary from 1.2 to 4 mm. The most commonly used material is a material with a thickness of 2 mm, but in no case should we forget that the choice should depend primarily on the trimmer model.

There is one main rule here: the more power the apparatus has, the thicker the line should be.

This element can also differ in the type of its section. So, it can be round (suitable for cutting plain grass) or square (for mowing soft green cover), sharp edges (tall grass) or be equipped with notches ideal for thin grass in diameter.

Do not forget that with the help of a fishing line it is allowed to mow only grass, and for other, coarser vegetation, it is imperative to use knives.

Next, you should take a closer look at the process of how to insert the line into the trimmer correctly. Indeed, it is with this procedure that many consumers often have difficulties.

How to tuck the line into the trimmer?

Any machine for mowing vegetation is necessarily equipped with a spool, which, in turn, may differ in different models with a filament feed system (automatic, semi-automatic and manual). It is from this parameter that it is worth starting from before deciding how to fill the line into the trimmer.

In order to tuck the line into the trimmer, you need to take at least 5 meters of material, which is then folded in half. The center of the cutting element must be inserted into a specially designated place, and then the cutting attachment must be wound using the visual cues on the spool indicating the direction. At the end of all the work, the lid, of course, will need to be tightened.

How do I fit the line into the trimmer? Operating tips

The trimmer is an excellent modern device designed for mowing unnecessary grass, and its main advantage is that this technique can be used in those places where an ordinary lawn mower will simply not be able to reach due to its massiveness. It is necessary to understand in more detail what trimmers are, and how to choose the best option for a particular suburban area.

Line adjustment

One of the main rules when replacing and adjusting equipment is that any manipulations with the mechanism should be carried out exclusively with the engine off and the device plug disconnected from the mains.

Perhaps these tips will tell you how to tuck the line into the trimmer as correctly as possible and, accordingly, give your site a neat and aesthetic appearance. All that is required is to correctly select the cutting material required by the type and, of course, to determine the category of the most used trimmer.

Briefly about the line

Taking into account the models of the tool, the thickness of the line is 1.2-4 mm. There are such configurations of it:

  • round. the most durable;
  • curly. for soft grass;
  • twisted or serrated. for thin grass;
  • professional, not suitable for all instrument models.

When changing the cutting thread, choose the one that suits your trimmer type. Preference should be given to specialized. Before tucking the line into the trimmer spool, it is best to soak it in water for half an hour. Then it will become more elastic and stronger.

How to tuck the line into the trimmer so that working with it does not get tired

Many summer residents use a trimmer to combat weeds. a scythe with an electric or gasoline engine. It is convenient when working in hard-to-reach places for a lawn mower: near fences, flower beds, houses, in a garden on narrow aisles, and can cut small branches. The main element of this miracle technique is an ordinary fishing line, wound on a reel. The device is simple, but the cutting part wears out quickly and needs to be replaced. And the question of how to fill the line in the trimmer worries many owners of summer cottages.

How to quickly remove the coil from the tool

Before the thread is wound on a bobbin, it must be removed. over, the removal methods depend on the characteristics of the instrument. On trimmers with a motor near the ground, the reel has two side buttons, when pressed, part of the body is separated together with a device for winding the thread.

On tools with a bent rod, the lamb on the device is moved counterclockwise; having disconnected it, they remove both the bobbin and the spring inside it. On trimmers with a straight bar, fix it with a screwdriver, rotate it clockwise and remove it. Then the device is disassembled either using latches or by moving its parts in different directions. Take out the spring from the coil.

Threading the line into the trimmer

The main question is how to properly wind the line on the trimmer reel, securely fixing it there?

In the case of a device with one antenna, up to four meters of fishing line are unwound, inserted into the hole inside it, fixing the fishing line, one end of it and moved in the direction indicated by the arrow. The end of the thread is fixed in a groove inside the bobbin so that it does not unwind during assembly. If there is no groove, then this free end is fixed with a finger. Then the coil is assembled.

How to Use a String Trimmer. 10 Skills to Master

How to thread a trimmer coil if it has two antennae? In this case, they check how many grooves there are on it. one or two. In the first case, both antennae are directed into a common groove, if there are two of them, then each of them into its own. 2-4 meters of thread is passed through the hole in such a way that the free ends of the thread are of the same length, and twist the bobbin in the direction of the arrow-pointer. The ends of the thread are inserted into the grooves or held with a finger, the device is assembled and attached to the trimmer.

In a spool with two grooves, the same piece of thread is folded in the form of a loop, sent to the groove between them and the ends are wound at the same time. Then repeat the previous assembly. With semi-automatic winding, the bobbins operate as follows. The fishing line is passed through the hole inside, its ends are fixed in the holes on the body, collect it and press the button. This allows the thread to be easily wound in the correct direction.

It is important to remember that the cutting surface must be protected from hard objects so that it does not wear out. Otherwise, it will be necessary to constantly stop and, having removed the reel, replace the used line. Keep your job fun and enjoyable!

See How to insert line into the trimmer

How to tuck the line into the trimmer?

In order for the area near the house to always look well-groomed and neat, it must be cut regularly. Fortunately, modern technology allows you to solve this problem without excessive physical effort. Electric trimmers are so easy to operate and maintain that even a teenager can use them to mow. The main thing is to figure out in advance how to fill the line in the trimmer.

How to load the line into the trimmer?

So, our task is to properly load the line into the trimmer. Let’s take a closer look at where to start its implementation and what pitfalls can await us in the process.

Step 1. choosing the line

Step 2. remove the coil from the trimmer

To perform this operation, the trimmer must be disconnected from the mains and turned over with the working head up. The further course of action depends on the trimmer model and the design of the coil itself:

  • for small trimmers with a lower engine, press the keys on the sides of the coil and remove its upper part from the head;
  • on trimmers with a curved bar, we clamp the coil body with one hand, while simultaneously turning the winglet located on the body counterclockwise;
  • for trimmers with a straight bar and a gearbox, insert a screwdriver into the hole located under the coil, and then turn the coil body counterclockwise.

Step 3. disassemble the coil

After the coil is removed from the head, it must be carefully disassembled. It is better to do this on an already mown area, since there may be a spring inside the coil, which will be quite difficult to find in tall grass. After disassembly, we will have three parts on our hands: the body (top cover), the protective casing and the coil itself.

Step 4. measure the required amount of fishing line

Newbie mowers are usually interested in how many meters of line to wind on the trimmer reel? There are two ways to solve this issue:

  • Unwind a skein of line on a flat, dry place and separate half of it.
  • Measure 3-4 meters of line from the skein.

In any case, after the end of winding, the turns of the line should be on the body of the reel, without sliding off it. You don’t need to try to wind as much as possible, as the line will unwind poorly and break more often.

Step 5. winding the line onto the reel

How to attach the line to the trimmer depends on the coil design. Consider the option when the reel body has one outlet for the line. In this case, the end of the line is clamped in the crevice of the coil, and then we wind the line, trying to lay the turns as tightly as possible. The direction of laying the turns should be opposite to the direction of rotation of the coil and is usually indicated on its inner part. After the end of winding on the reel, you must put on a protective casing and bring the end of the line into it.

If the reel is designed to work with two tails, then the line must be folded in half and laid in the groove in the center of the reel. Further winding will be carried out along one or two slots, depending on the design of the coil. The direction of winding must also be opposite to the direction of rotation of the coil. At the end of the ponytail, the line will also need to be led out into the holes on the top of the reel.

The first way to wind the line

The required amount of line has been cut off. Now you need to carefully examine the bobbin in order to understand what type it belongs to. It depends on how the line is to be wound on it.

There are two types of bobbins. In general, they differ slightly from each other. Regardless of the type, the coil is divided into two sections. upper and lower. In the first type, the dividing edge does not close into a ring and has a depression.

In the second type, it is solid, but near it there are small through holes on the sides on both sides. The method of winding the thread must be studied depending on which of the above types the coil belongs to.

  • The previously prepared six-meter segment must be bent in half. It is best not exactly in the middle, but in such a way that one half is about fifteen centimeters longer.
  • Then the place of the fold must be inserted into the recess in the dividing face. One half of the line should be at the top of the spool, the other half at the bottom.
  • Now you can start winding directly. You need to wind in the direction of the arrow on the bobbin. When winding, you need to hold the threads so that they do not intertwine and the upper half winds up in the upper part of the spool, and the lower half in the lower part. Each half should have about fifteen centimeters free from the end.
  • There are small indentations (or, in other words, grooves) in the upper edge of the bobbin for securing the consumable. The ends of the threads must be inserted into these grooves so that they are fixed against each other.
  • The final stage of threading the consumable into the tool. the ends attached to the bobbin must be threaded into the corresponding holes in the trimmer head.
  • That’s all. The winding process is complete. Now all that remains is to assemble the head into a single whole. The spring fits neatly back between the bobbin and the head. Then you need to insert the bobbin into the head and press them together.
  • It is recommended that the free ends of the thread be pulled out more. To do this, pull the ends of the consumable one by one so that they are removed from the grooves of the bobbin. You can make sure that the cutting element is removed from the retaining grooves by trying to pull the threads a little. they should freely exit through the holes in the head.
  • While pressing the bobbin down, you need to put the cover over it. The cover must be screwed to the head so that all the grooves on their bodies are aligned and the bobbin remains fixed between them.
  • And finally, the very last action. the head is screwed back into place at the bottom of the tool.

The process is complete. The line is tucked into a reel. The trimmer is ready for further work.

Which line to choose

Before you stock up on this material for refueling in the trimmer, you need to decide on the choice. After all, the usual so-called round fishing line is far from the only existing species. How to choose the most suitable one? First you need to determine the working conditions.

Selection by type. Round line is the most common. It will fit any coil with rare exceptions. This type of consumable is suitable for cutting fresh, juicy grass. But with the mowing of the so-called dead wood, such a species may no longer cope. It is pointless to mention attempts to mow bushes with this thread.

In addition to the usual type, there are others with sharp edges. Usually they are made with an asterisk or a square. The presence of sharp edges is the main feature and key difference of these threads.

It is due to this feature that threads of these types are able to mow dry weeds. But sharp-cut threads are not without drawbacks, the main of which can be called rapid wear and strength, which is noticeably inferior to the round type.

In addition to the already mentioned types of woods, there are also interesting and common varieties. Especially among them can be noted fishing lines, inside which a metal wire is stretched. This type of thread is often used in gasoline powered tools with an engine over 1.5 horsepower.

Metal-cored threads come in both round sections and sharp edges. Regardless of the type of section, such threads are the best suited for overcoming difficult-to-cut plants. Threads of this type can easily mow not only dry grass, but even small bushes.

The wires with a wire inside compare favorably with other types of consumables for their incredible wear resistance. Unfortunately, this feature has a more than noticeable impact on the price of this type. The cost of yarns with a core is much higher than the cost of other types of yarns.

Thickness selection

In addition, you should pay special attention to the thickness of the consumable. For mowing young grass, a thread with a diameter of one and a half millimeters is suitable. The larger the diameter of the thread, the more dry and coarse weeds it is capable of overpowering.

When choosing a fishing line by thickness, there is one “but”. It is important not only to assess the capabilities of the material, but also to take into account the features of the trimmer. Be sure to check the user manual that came with your tool for information on cutting element requirements.

Using the wrong thread can damage the tool. Using a thread that is too thick will overload the machine’s motor. And the use of a thread that is too thin will significantly increase the wear of the twisting mechanism.

That is why it is necessary to approach the choice of consumables no less responsibly than to refuel it in the trimmer. When a suitable fishing line is found and purchased, you can begin to consider ways of winding it on a reel.

Features of the use of trimmers

A trimmer that mows grass with a fishing line can be used near: houses and other buildings, fences and hedges, trees and shrubs, flower beds and flower beds, row spacing in a garden plot.

Such a convenient, and most importantly, effective device, like a trimmer, exists in several variations:

  • petrol;
  • rechargeable;
  • electric.

As the names suggest, trimmer types differ markedly from one another. But regardless of the type of this tool, a fishing line can be its cutting element. Of course, the line tucked into the trimmer reel is not endless. And sooner or later you will need to replace it with a new one.

Line consumption directly depends on the frequency of use of the device and the scale of the work performed. The more grass is cut and the more often it is trimmed with the trimmer, the more active the line is used in it. And, accordingly, the faster it will end. In this regard, the question arises: how to thread the line into the trimmer spool?

grass, trimmer, tuck, line

Not everyone knows the answer to this question. But the winding of the line on the reel plays an important role in the trimmer operation. For the device to function properly, it is very important to properly wind the new line onto the reel. How to change the line on the trimmer, and will be discussed in this article.

How to wind the line onto the trimmer spool

At first glance, threading a line into the reel of a tool is not an easy task. But it is enough to carefully study this process. and in the future, all the necessary actions will be performed without any difficulties.

It is worth reading this guide to find out how to tuck the line into the trimmer. The step-by-step instructions below take into account the peculiarities of the coils of different types of trimmers, therefore, it is applicable to any tool.

So, the procedure is as follows.

  • The line spool is the bottom end of the trimmer. First of all, of course, you need to remove this head from the device. To do this, you need to fix the rod (or, in other words, the shaft) on which the coil is attached. It is required to fix it in such a way that it does not scroll. The easiest way to do this is by placing a kind of stupor (preferably metal) between the shaft threads through a special hole. When the shaft is fixed, the spool can be unscrewed.
  • At this stage, you have to remove the bobbin from the head, on which the fishing line is attached. To do this, you need to disassemble the head into elements. To do this, you first need to find a retainer on its body. It is located on the circumference of the product and is like a button. When the latch is found, you need to press it firmly. Keeping the latch pressed, turn the head cover clockwise. Then you need to remove the cover and remove the bobbin.
  • A tight spring is placed between the bobbin and the head. It needs to be put aside for a while so that it does not interfere with the winding process. Before proceeding with the step of winding the line, it is necessary to inspect the bobbin. If there are remnants of old fishing line on it, they must be removed. When the bobbin is cleaned, you can start preparing a new bobbin.
  • From a previously prepared skein of new fishing line, it is necessary to measure and cut off six (maximum. seven) meters. Keep the bobbin close at hand.

At this point, the key stage actually begins, which this article is devoted to.

How to wind the line on a trimmer reel: winding methods and video

Any garden owner knows how quickly weeds can fill an area. A trimmer will help to defeat them without undue effort. This incredibly useful device is an indispensable tool for trimming and mowing grass.

It is no secret that an ordinary lawn mower cannot be used everywhere. In contrast, the trimmer can handle even very difficult areas. This is especially true for those tools in which the cutting element is not a knife, but a fishing line.
  • Features of the use of trimmers
  • Which line to choose
  • Thickness selection
  • How to wind the line onto the trimmer spool
  • The first way to wind the line
  • Second winding method
  • Second winding method

    • A previously prepared segment of six meters in length is required to be bent exactly in the middle and cut. Thus, two segments of the same length are obtained.
    • At one end of each segment, you need to make a small “hook”. To do this, it is necessary to bend a couple of centimeters from the edge and fix it for a short time so that the “hook” does not unbend.
    • Then one segment is taken. The hook is inserted into the through hole at the top of the bobbin.
    • Now you can proceed to the key stage. winding. The direction in which to wind is indicated by an arrow on the bobbin. It is important to ensure that the line is wound strictly within the upper part of the reel. You do not need to wind the thread to the very tip. about fifteen centimeters should remain free from the end.
    • In the upper edge of the spool there are small recesses (so-called grooves) for fixing the consumable. The loose “tail” of the thread must be inserted into one of these grooves.
    • The top of the coil is tucked in. Now you need to do the same procedure with the bottom. Take the second piece of thread. The “hook” is threaded through the through hole at the bottom of the bobbin.
    • After that, you can start winding the fishing line (within the lower compartment). And for this segment, you also need to leave about fifteen centimeters free from the end. This remaining “tail” must be inserted into the notch opposite to the one into which the end of the first segment was inserted.

    The subsequent steps for this type of coils are exactly the same as described for the previous type in paragraphs five to nine.

    This is how the line in the trimmer spool changes. There is nothing complicated in the process. And already after several refuelings, all actions will come to automatism.

    To visually study the process described above, you can turn to the Internet for help. On the popular YouTube portal there are many different videos showing how to wind the line on the trimmer reel.

    How to properly thread the line into the trimmer spool

    There are different coils. For a reel working with one tendril, it is easier to thread the line than with the others. There is a hole in the inside of the reel for fixing the line. You need to insert the tip of the fishing line into it and start winding.

    Important. you need to wind in the opposite direction from the rotation of the coil on the trimmer. Look carefully, most likely in the same place, on the coil, the direction of winding will be indicated with an arrow. It can take about two to four meters of line to wind, depending on the size of the reel itself. At the end of winding, a small piece must be left free. It will protrude outward. In order to clamp it, there is a groove, which is the same on the inner surface of the coil. This notch secures the end of the line tightly and prevents it from unwinding when the spool is reassembled. If the reel design does not provide for the presence of this groove, then hold the end of the line with your hands yourself. Now you can attach the outside of the coil. It also has a hole through which you need to thread the outer piece of your fishing line. Now you can put the assembled coil back in place on the trimmer.

    Now about coils designed to work with two antennae. First you need to see how many line grooves there are on the reel. The presence of either one or two in different coil designs is provided. And then it already becomes clear how it will be necessary to wind. two antennae in one groove at once, or each antenna is separate. Please note that if there is one groove in your reel, then the hole for the line must be through. Now you need to rewind the fishing line about 2-4 meters and thread it into this through hole so that the fishing line turns out to be the same on one side and on the other. Now look again, there will be an arrow indicating where to wind. Direction. opposite to the direction of coil rotation on the trimmer. Wrap two tendrils of the fishing line at once, together. We leave small ends. If there are special grooves, we clamp them in them, if not, then just hold them tightly with your hand, with your finger. There will be two holes in the outer body of the reel. a separate one for each end of the line. Thread, assemble the reel and put it on the trimmer.

    If you have a reel with two grooves, then the unwound piece of fishing line (all the same 2-4 meters) must be folded in two, and in a special groove (it should be located just between the grooves), insert the line bend, that is, the middle, folding her in the form of a loop. As in the previous case, you need to reel both lines at once, only this time. each with a separate groove. And then. as described above. they fixed it, attached the upper body, fixed the coil to the trimmer.

    Replacing a Weed Eater String (String Trimmer Line) | The Home Depot

    Another type of coils is with a through hole on its inner part. The outer casing also has holes. That is, it turns out that the line must be passed through these holes in both the inner and outer parts, and immediately assemble the coil. And for winding, they use a button (this is the same button that is used to release the fishing line during operation). Only to wind the line now you need to rotate this button. over, the mechanism of this button is designed in such a way that you can turn it only in one direction, just the direction you need.

    How to properly tuck the line into the trimmer

    How to properly tuck the line into the trimmer

    How to wind the line on the trimmer. Trimmer head Oleo-Mac

    How to properly thread the line into the reel of the petrol trimmer or

    Winding the line to the trimmer

    Trimmer line, how to wind the line on the trimmer spool

    How to replace the line in the trimmer spool

    How to reel fishing line

    Trimmer. lawn mower Husqvarna 323R, overview lawn mowers, how

    NEW Automatic lawn mower reel

    How to replace the line on a Shtil trimmer. improved

    Trimmer line. how to refuel

    trimmer. how to wind the line

    Winding the line onto the AutoCut spool for the Stihl fs 55 trimmer

    Benzotrimmer Stihl fs 55 Review, Operating experience addition

    How to wind a line, cord, for a trimmer

    line replacement in the trimmer head lawn mowers, lawn mowers

    Threading the line into the trimmer reel part 2

    TRIMMER CARVER GBC-31 F

    Threading the line into the mowing head Stihl lawn mowers

    Husqvarna trimmer. replacement of a cord of fishing line, strings, cord

    How to replace line in any trimmer

    How to wind, tie, attach a fishing line or braid to a cord on

    Line selection

    In order for the trimmer to work “like a clock”, it is necessary to choose the right line, that is, choose it taking into account the trimmer model and the type of work. There are two important parameters in this matter. this is the diameter and section.

    The diameter of the fishing line must correspond to that recommended for this model (it must be specified in the product passport).
    The cross-section of the fishing line is round, square, with sharp edges (pentahedron). A round line is designed for mowing young grass and lawn, square and pentagonal line will come in handy if the grass is coarse and weeds have grown on the lawns.

    Instructions for refueling the benzotrimmer line

    Trimmer head modification

    Trimmer mowing heads can be of various modifications: single-line for trimming the lawn (mows with one line of fishing line); two-string for mowing grass and land clearing with automatic line feed or manual string length adjustment.

    Modern growers are increasingly offering gardeners universal trimmers with two-line automatic mowing heads.

    How to properly fill the line in the trimmer video

    Step-by-step instructions for threading the line into the trimmer

    • Press the clips inward until they click and remove the cover from the mowing head.
    • Turn the spool carefully, it will free itself from the holder, and now remove it.
    • Cut two identical pieces of line (the edge of the line should be cut at an angle. This will make the job easier). Take one of them and insert the end of the line into a special on the reel (there may be hooks, ears, clips). Then wind the string in the direction of the arrows. Spread the line evenly, tightly. Attach the end of the string to the specially provided hole in the reel.
    • Do the same operation with the second part of the line, only thread the end on the spool from the opposite side.
    • Return the line spool to the mowing head. Pull out the ends of the line through the holes in the spool and thread them into the special connector of the head.
    • Spread out the line carefully and close the lid. Cut off excess fishing line, leaving 12-15 cm at each edge.

    All is ready. The trimmer is loaded with line and ready to go. Now you can happily start mowing your favorite meadow, summer cottage, local area.

    It is only important to remember that not only the quality of the work performed, but also your safety will depend on how you load the cutting line into the trimmer.

    grass, trimmer, tuck, line

    Video instruction for refueling the benzotrimmer line (lawn mowers)

    How to properly wind the line on the trimmer spool

    Many, having worked out the factory line on a recently purchased trimmer, try to wind a new one, but cannot, because they do not know how to properly wind the line on the spool (bobbin) of the trimmer. It seems that there is an instruction, but it still does not work. Let’s try in this article to deal with this issue.

    So, in order to wind the line, you first need to remove the coil from the trimmer. this will be more convenient. The removal method will depend on the type of trimmer.

    than 200 types of trimmers in one place at the lowest prices. Click and watch

    Now, having removed and disassembled the coil, we proceed, in fact, to winding.

    Removing the coil from the trimmer

    On small electric bottom motor trimmers (when operating near the ground), the reel usually has two buttons on the sides. Click on them and disconnect one half of the coil body from the second, which remains on the trimmer. Together with the first half, the inner part is also taken out, on which the fishing line is directly wound. When disassembling, be careful: there is a spring inside that can fly out and get lost.

    On electric and gasoline trimmers with a curved bar (on such trimmers it is not yet possible to put a knife), you need to wrap the coil body itself with one hand, and with the other hand you need to start rotating the lamb on it counterclockwise. It is he who attaches the coil to the trimmer bar. Having unscrewed the lamb, carefully remove the entire coil, trying not to lose the spring inside.

    On electric and gasoline trimmers with a straight bar and a gearbox at its end (on such trimmers, in addition to fishing line, you can also install a knife), we look for a hole under the coil, insert, for example, a screwdriver into it, quietly rotate the coil until the screwdriver crawls even deeper, and the coil will lock. Now we turn the whole coil clockwise (since the thread is left-handed) and remove it from the trimmer. Then we disassemble the coil. It can be assembled using latches or twisted with a lamb. If the coil is on latches, then press on the sides on the base of the latches so that they bend and release one half of the coil body from the other. We just unscrew the lamb. There may also be a third type of connection of two halves of such a coil: with it, you need to grab the lower part with one hand, and the upper part with the other, and start turning them in opposite directions. When disassembling such a coil, you also need to make sure that the spring inside is not lost.

    Winding process

    If your coil is designed to work with only one tendril, then it’s simple. You need to rewind 2-4 m of fishing line (depending on the size of the reel), find a fixing hole for the line on the inside of the reel, insert one end of the line there and start winding the line in the direction opposite to the direction of rotation of the reel on the trimmer. On the inside of the reel, they usually indicate with an arrow in which direction to wind the line. Having reeled the fishing line, we leave a small piece of it unwound in order to expose it outside. We fix this piece in a special groove located on the inner part of the reel and designed so that the line does not unwind at the time of collecting the reel. If there is no such groove, then you will have to hold the fishing line with your finger to prevent it from unwinding during the further collection of the coil. Next, we take the outer part of the coil and thread the outer piece of fishing line into the existing hole, assemble and put the coil back on the trimmer.

    If the coil is designed to work with two antennae, then do the following. On the inside of the reel, we look at how many grooves there are for winding the fishing line. There may be one or two of them. If there is only one groove, then both tendrils are wound along this one groove. If there are two grooves, then each antenna is wound along its own groove. A reel with one groove should have a through hole through which the line is threaded. We unwind 2-4 m of fishing line, thread it through this hole so that it sticks out equally on each side of the fishing line. And we simultaneously wind both antennae of the fishing line in the same direction, opposite to the direction of rotation of the coil on the trimmer and coinciding with the direction indicated by the arrow on the inside of the coil. We leave a little of the fishing line unwound, fix the resulting ends in special grooves, and if they are not there, we hold them with our fingers. We pass both ends into the existing holes on the outer casing of the coil. We collect the coil and attach it to the trimmer.

    If there are two grooves, fold a piece of fishing line 2-4 m long in half, insert the loop obtained at the place of the bend into the groove between the two grooves, and simultaneously wind both ends of the fishing line along its own groove. Further actions are similar to the previous option.

    There are also reels in which the fishing line is threaded through a through hole on the inside. After that, the ends of the line, without winding, are threaded completely through the holes on the outer body of the reel, collect the reel and begin to rotate the button, which is usually pressed, in order to release the line during operation as it wears out. Rotate the button. the fishing line itself is wound inside. At the same time, it will not work to turn it in the “wrong” direction, since it can only rotate in one direction. If you get used to it, you can wind fishing line on such a reel without even disassembling it. you just need to combine the through hole of the inner drum with the holes on the outer body of the reel, and then thread the fishing line through them.

    That’s all on this issue. Happy winding!

    Which line to choose

    Before you stock up on this material for refueling in the trimmer, you need to decide on the choice. After all, the usual so-called round fishing line is far from the only existing species. How to choose the most suitable one? First you need to determine the working conditions.

    Selection by type. Round line is the most common. It will fit any coil with rare exceptions. This type of consumable is suitable for cutting fresh, juicy grass. But with the mowing of the so-called dead wood, such a species may no longer cope. It is pointless to mention attempts to mow bushes with this thread.

    In addition to the usual type, there are others with sharp edges. Usually they are made with an asterisk or a square. The presence of sharp edges is the main feature and key difference of these threads.

    It is due to this feature that threads of these types are able to mow dry weeds. But sharp-cut threads are not without drawbacks, the main of which can be called rapid wear and strength, which is noticeably inferior to the round type.

    In addition to the already mentioned types of woods, there are also interesting and common varieties. Especially among them can be noted fishing lines, inside which a metal wire is stretched. This type of thread is often used in gasoline powered tools with an engine over 1.5 horsepower.

    Metal-cored threads come in both round sections and sharp edges. Regardless of the type of section, such threads are the best suited for overcoming difficult-to-cut plants. Threads of this type can easily mow not only dry grass, but even small bushes.

    The wires with a wire inside compare favorably with other types of consumables for their incredible wear resistance. Unfortunately, this feature has a more than noticeable impact on the price of this type. The cost of yarns with a core is much higher than the cost of other types of yarns.

    Choosing a fishing line

    Look carefully at the cross-section of the line, it can be round or with ribs (square, “star”). The cut thread is good for picking up tougher grass and weeds. However, if the grass is too stiff, it is better to use a lawn mower with knives (milling cutter).

    Some types of fishing line have rather sharp edges, so in order to avoid injury, it is worthwhile to refuel the reel with gloves.

    Trimmer head types

    Scythe heads can also have a different device: with automatic line feed, semi-automatic or manual. In the first case, in order to lengthen the working ends of the thread, it is necessary to slightly reduce the speed. And when you add them again, the line will come out automatically. For semi-automatic devices, you need to click on a special button located below. It is not necessary to turn off the trimmer. It is enough just to hit the scythe on the ground. The most inconvenient to work with are hand-fed trimmers. To lengthen its working ends, the tool must be turned off and the operation must be performed manually.

    There is also a reel with a trimmer line:

    • single-string. suitable only for cosmetic trimming of the local area;
    • two-string. used for more serious work to clean the area from grass.
    • A ring needs to be cut out of thin but durable plastic, and its inner diameter should be equal to the thickness of the core on which the fishing line is wound, and the outer one. to the diameter of the reel.
    • On the inside of the ring, you need to make a small notch through which the thread will be threaded.
    • Next, the ring is cut, put on the coil. And the place of the cut is glued together with tape or soldered with a hot knife. That’s all. now each end of the line can be wound on its own part of the reel.

    How to properly wind the line on the trimmer

    Sooner or later, every owner of a personal plot or a lawn near the house thinks about the problem of cleaning the grass. To cope with this task, today’s summer residents are helped by a manual lawn mower or trimmer. The working part of such a tool is a rotating reel, which cuts off unnecessary grass with a fishing line. Everything seems to be simple, but not every amateur gardener knows how to wind the line on the trimmer reel. Oddly enough, manufacturers often forget to raise this issue in the operating instructions.

    The first way to wind the line

    The required amount of line has been cut off. Now you need to carefully examine the bobbin in order to understand what type it belongs to. It depends on how the line is to be wound on it.

    There are two types of bobbins. In general, they differ slightly from each other. Regardless of the type, the coil is divided into two sections. upper and lower. In the first type, the dividing edge does not close into a ring and has a depression.

    In the second type, it is solid, but near it there are small through holes on the sides on both sides. The method of winding the thread must be studied depending on which of the above types the coil belongs to.

    • The previously prepared six-meter segment must be bent in half. It is best not exactly in the middle, but in such a way that one half is about fifteen centimeters longer.
    • Then the place of the fold must be inserted into the recess in the dividing face. One half of the line should be at the top of the spool, the other half at the bottom.
    • Now you can start winding directly. You need to wind in the direction of the arrow on the bobbin. When winding, you need to hold the threads so that they do not intertwine and the upper half winds up in the upper part of the spool, and the lower half in the lower part. Each half should have about fifteen centimeters free from the end.
    • There are small indentations (or, in other words, grooves) in the upper edge of the bobbin for securing the consumable. The ends of the threads must be inserted into these grooves so that they are fixed against each other.
    • The final stage of threading the consumable into the tool. the ends attached to the bobbin must be threaded into the corresponding holes in the trimmer head.
    • That’s all. The winding process is complete. Now all that remains is to assemble the head into a single whole. The spring fits neatly back between the bobbin and the head. Then you need to insert the bobbin into the head and press them together.
    • It is recommended that the free ends of the thread be pulled out more. To do this, pull the ends of the consumable one by one so that they are removed from the grooves of the bobbin. You can make sure that the cutting element is removed from the retaining grooves by trying to pull the threads a little. they should freely exit through the holes in the head.
    • While pressing the bobbin down, you need to put the cover over it. The cover must be screwed to the head so that all the grooves on their bodies are aligned and the bobbin remains fixed between them.
    • And finally, the very last action. the head is screwed back into place at the bottom of the tool.

    The process is complete. The line is tucked into a reel. The trimmer is ready for further work.

    Thickness selection

    In addition, you should pay special attention to the thickness of the consumable. For mowing young grass, a thread with a diameter of one and a half millimeters is suitable. The larger the diameter of the thread, the more dry and coarse weeds it is capable of overpowering.

    When choosing a fishing line by thickness, there is one “but”. It is important not only to assess the capabilities of the material, but also to take into account the features of the trimmer. Be sure to check the user manual that came with your tool for information on cutting element requirements.

    Using the wrong thread can damage the tool. Using a thread that is too thick will overload the machine’s motor. And the use of a thread that is too thin will significantly increase the wear of the twisting mechanism.

    That is why it is necessary to approach the choice of consumables no less responsibly than to refuel it in the trimmer. When a suitable fishing line is found and purchased, you can begin to consider ways of winding it on a reel.

    Trimmers are different

    To understand how to wind the line on the trimmer reel, you first need to understand the tool itself: what kind of company it is, how it works, how it works and what parts will be needed for repairs. To begin with, trimmers are divided into gasoline and electric, and they can have a knife and fishing line as cutting elements. There are 3 trimmer modifications:

    • with fishing line and knives with 2–4 blades;
    • only with knives;
    • only with line.

    Of course, craftsmen can improve anything and sometimes they fill the trimmers, for example, with metal wire or fishing line. But doing this is absolutely not worth it. you can seriously injure yourself or others.

    Second winding method

    • A previously prepared segment of six meters in length is required to be bent exactly in the middle and cut. Thus, two segments of the same length are obtained.
    • At one end of each segment, you need to make a small “hook”. To do this, it is necessary to bend a couple of centimeters from the edge and fix it for a short time so that the “hook” does not unbend.
    • Then one segment is taken. The hook is inserted into the through hole at the top of the bobbin.
    • Now you can proceed to the key stage. winding. The direction in which to wind is indicated by an arrow on the bobbin. It is important to ensure that the line is wound strictly within the upper part of the reel. You do not need to wind the thread to the very tip. about fifteen centimeters should remain free from the end.
    • In the upper edge of the spool there are small recesses (so-called grooves) for fixing the consumable. The loose “tail” of the thread must be inserted into one of these grooves.
    • The top of the coil is tucked in. Now you need to do the same procedure with the bottom. Take the second piece of thread. The “hook” is threaded through the through hole at the bottom of the bobbin.
    • After that, you can start winding the fishing line (within the lower compartment). And for this segment, you also need to leave about fifteen centimeters free from the end. This remaining “tail” must be inserted into the notch opposite to the one into which the end of the first segment was inserted.

    The subsequent steps for this type of coils are exactly the same as described for the previous type in paragraphs five to nine.

    This is how the line in the trimmer spool changes. There is nothing complicated in the process. And already after several refuelings, all actions will come to automatism.

    To visually study the process described above, you can turn to the Internet for help. On the popular YouTube portal there are many different videos showing how to wind the line on the trimmer reel.

    A garden trimmer is a useful tool that makes life much easier for any gardener or private home owner. The grass just rushes in the summer, especially after the rains, so you can’t go anywhere without it. But over time, sooner or later, the line in it will end, and it will be necessary to insert a replaceable skein of new line. Some summer residents get stumped. how to do it yourself? So our article will help them.

    Let’s get started

    Before you can properly tuck the line into the trimmer, you need to cut off the required amount of it. Do not be greedy, as for the first time, five meters is enough for training. To do this, the protective cover is removed from the trimmer coil, and one end of the line is clamped in a special clip (or slot).

    You need to reel evenly, trying not to overtighten. In general, you need to fill the spool until the line layer is equal to the edge of the spool. It should not lie too tightly, slightly straightening after putting on the casing.

    Short introduction

    To begin with, it must be said that knives or fishing line can be used as a cutting element in trimmers. Both types have their advantages and disadvantages.

    So, knives do a much better job with shrubs and dry wheat grass, but polymer thread is much cheaper and more affordable. In addition, the 4 mm trimmer line also allows you to cut fairly tough grass. Of course, it cannot be compared with a knife, but the efficiency is also not bad.

    Note that even in the latter case, you need to know exactly what its diameter is used in your trimmer. Manufacturers do not take all the values ​​from the ceiling: if you take a larger line, then you will greatly overload the engine, which may well cause the latter to fail.

    Do not do this!

    Not to mention the enormous strain on the engine, breaking the cable can have serious consequences for your limbs. It is better to use the recommended consumables than to become a patient of the surgeon.

    If you really need to mow heavily overgrown lawns, manufacturers offer special consumables with increased surface area. In this case, the thinner fishing line is braided into a kind of pigtail. Maintains normal thickness but improves efficiency.

    We will learn how to properly tuck the line into the trimmer

    Finishing work

    Then the remaining end of the line is threaded through the hole in the protective casing. After that, the reel and its protective cover are connected, and this time a piece of fishing line is threaded into the hole on the protective cover.

    The assembly is pushed onto the trimmer by turning clockwise until a clearly audible click is heard. By the way, before you install the line on the trimmer, figure it out better with its design. Otherwise, you can easily break something.

    That’s all. The tool is put into working position, turned on, after which the extra piece of fishing line is cut by itself on a specially made blade.

    So you learned how to properly tuck the line into the trimmer!