Safety regulations
Among the safest and most popular trimmers, products from German manufacturers (including Denzel) are especially appreciated, as they pay increased attention to quality and reliability. However, despite the brand and model, there are a number of rules that you need to clearly know and follow when using a grass trimmer.
- Before use, it is necessary to read the instructions for use.
- You can not work with the trimmer in a state of fatigue, illness, intoxication.
- It is forbidden to use the scythe in explosive and fire hazardous areas.
- Do not mow during thunderstorms and rain, or after rain, when the grass is wet.
- You can work only during daylight hours, in good light conditions.
- Use only the type of fuel and lubricant that is appropriate for the particular grass trimmer model.
- It is not recommended to repair the instrument yourself.
- Do not touch rotating or heating elements during operation.
- Do not smoke and light a fire while mowing, etc.
Important! When using the grass trimmer, there are other factors that are harmful to health: increased noise level, vibration, exhaust gases, high temperature of some parts, branches flying off, etc. To minimize risks, you need to use protective clothing, glasses and headphones.
If you still have questions about adjusting the backpack belt of a particular brushcutter model, you can try to find the answers in the instruction manual attached to the product, or watch a video on the Internet, where it is clearly and easily shown how to set up and adjust the belt along with the brushcutter.
Preparing the Balance XT Harness for Use with a Husqvarna Brush Cutter
It is necessary to start assembly by removing all additional parts to open the box and check the equipment of the unit. If everything is in the workplace, then we have to attach a handle to a bar with a motor, put on a belt, attach a protective casing (can mean: Casing (hood; special). a rigid body (shell) of a machine (device, mechanism, apparatus, unit), which is not a supporting element of the structure, for fastening and maintaining individual) and cutting elements.
2.4. First you need to get out the handle and unscrew the thumbscrew, which strengthens the highest part of the support, without losing the spring.
We insert the handle into the slot and fix it, not putting it away in a long drawer. We will adjust the final position after the final assembly of the lawn mower.
We put on the handle (a polysemantic term that can mean: Pen. a writing instrument with which you can leave an ink mark on the surface Pen. a diminutive form of the word “hand”) control the unit onto the handle tube and tighten the fastening bolt. For this purpose, the kit contains a universal key.
For our client, the controls for the STIHL FS 130 petrol cutter are located on the handle. These are: the throttle lever, which has protection against accidental start-up and the switch-off lever of the unit, which is controlled by the thumb. In the modification of brushcutters with a D-shaped handle, the controls are located next to the engine on the bar.
We put a plastic protective cover. If you plan to use only a knife, then for his work (can mean: Work. the functioning of any system. a mechanism, biocenosis, organism or community. as well as its part) we use part of the casing (in the picture it is colored orange).
On the contrary, there is work to be done with a cutting line, then a plastic skirt is additionally put on the protective casing of the chainsaw and a knife is placed to cut the line. In some varieties of this model, the casing may be all-purpose, as it is also called, two different casings are attached. one for the fishing line and the other for the knife.
Having pulled the skirt over the casing, it is necessary to check the reliability of its fastening. If you will need to fix this protection with another screw.
At the moment, you need to put a knife for cutting the line and fix it with a screw.
It remains to install the reel, after having previously tucked it in with fishing line. The coil is screwed onto a shaft (as shown) or secured with a special nut. Bear in mind that the thread on the shaft is traditionally left-handed. How to thread the line into the reel, read the instructions.
If a knife is required, then we put it instead of a coil. The knife is equipped with a protective cover so that it does not burrow into the soil during operation. After installing it, do not forget to scroll This common rumor is a cutting element and make sure it does not move freely.
And the extreme, simple, step is to install a steel clamp on the bar, i.e. belt mounts (item of clothing, which is a long leather, woven, or composite metal band, equipped with a metal or (less often) plastic fastener (buckle) on the front side) suspension.
When the mower is assembled, we put on the shoulder strap as it is also called the belt knapsack harness (depending on what is given in the set) and adjust them to the figure. We fill in the gasoline consistency, start the engine. and go.
Adjust the hook height of the grass trimmer backpack strap by tightening the shoulder straps so that the grass trimmer blade lowered to the ground (grass trimmer. an element of an electric razor or razor used for trimming a mustache and beard) was located parallel to the surface of the site (strictly horizontal). While working with the grass trimmer saw blade, adjust the hook height (by tightening the shoulder straps) so that the grass trimmer saw blade is tilted slightly forward relative to the ground.
3.5. As you move the ear for hanging the braid onto the grass trimmer strap forward, as it is also called reverse, balance the grass trimmer so that when the steering wheel is released, the grass trimmer knife is close to the surface of the plot, but does not lie on the grass. For cutting bushes and young trees with a saw blade (“Round dish”). a circle (low cylinder) or an object in the form of a circle) the brush cutter, the grass trimmer must be balanced so that when the steering wheel is released, the machine hangs on the hook (Can mean) horizontally to the ground. Attach.
Adjust the grass trimmer shoulder straps (harness straps) so that the overload is evenly distributed over the shoulders (check by pressing down on the grass trimmer suspension hook with your hand).
Husqvarna Grass Trimmer Backpack Video Clip. About the design highlights of the belt suspension (harness), which simplify and make the most harmless mowing with a brushcutter, trimmer, petrol cutter, Husqvarna brush cutter. wide shoulder straps and an elastic waist belt, rapidly unfastening locks (carabiners) for a fire or other situation requiring a quick release grass trimmer. On the versatility of belts for men and women.
These Husqvarna grass trimmer backpack belts (Balance 35/55, Balance X, Balance XT) are used on all trimmers, petrol cutters, brushcutters, electric cutters, brush cutters.
When should you brush your teeth: before breakfast or after? Surely a person knows that you need to brush your teeth twice a day. Imagine a morning without
How to properly brush your dog’s teeth at home Hello! Ya Kulkova Nadezhda Petrovna, senior veterinarian, specialist in veterinary dentistry
How to properly peel a lemon. Video Description: In hot and sunny Georgia there is such a custom: if a young man is in love with a lady,
We Brush Your Teeth Correctly Currently, there are both general and personal advice on how to properly brush your teeth and oral cavity. At the same time, the question is how long you need to clean
There are grass trimmers that do not require additional accessories. for example, lightweight battery-operated electric trimmers. Even a child can carry them, and they lie firmly in the hand without pulling out. But in most of the options, grass trimmers weigh from 6 to 9 kg, and in order not to get tired of carrying them from 1st place to another place, a belt is suitable.
What else is the trimmer belt suitable for??
1) For transporting the grass trimmer. Transporting a grass trimmer to the country when there is no car is not an easy task. If the equipment does not have a strap, then a cover with a shoulder strap should be sewn. This will facilitate overloading when transporting the grass trimmer.
2.4) For easy mowing of grass. After all, if your hands get tired, then it will be lazy to mow the weeds and the lawn that has grown. If you want to, then hands trembling with lethargy are a terrible option.
3) For an ergonomic position of the grass trimmer in relation to the body. Correctly fastened and adjusted in length belt to protect against lumbar injuries and overexertion of the back muscles.
Hook height adjustment
The most important thing is to adjust the belt so that the grass trimmer is at the correct level from the ground. To do this, raise or lower the height of the hook, which is done by tightening the shoulder straps until the holder is 10-15 cm below the hips (palm width). In this case, the knife of the attached grass scythe should be parallel to the surface, that is, in a strictly horizontal position.
On a note! Attaching the grass trimmer too high will severely restrict grass grip.
How to Wear the Grass Trimmer Belt
Working with the trimmer is much more comfortable and easier with the help of a special strap. Thanks to it, the operator can mow large areas of grass for several hours in a row without pain in joints and muscles. The double-shoulder harness is designed in such a way that the lawnmower can be held by the mountings by itself. without the help of hands. She only needs to set the direction, and she will do the rest herself. How to properly attach the belt to the trimmer and adjust it for yourself in order to lighten the load, and will be discussed in this material.
Almost all trimmers (except special trimmers) rotate the line or disc clockwise. That is why it is better to mow the grass from right to left (a movement that resembles a mowing movement). It can be mowed by tilting slightly.
Mowing should be done in a gentle motion, not in jerks. Cut the grass half the length of the cutting element. If you grab more, a grass trimmer should be able to handle it, but grass can clog the space between the spool and the tube.
Before mowing the grass, first adjust the hairline and anchor it securely in the cavity so that the hairline does not hang down or go there. Here. Then refuel appropriately (unless you have an electric grass trimmer), which consists of special oil and gasoline. Then start mowing the grass in slow motion (not fast) to the right and left. Do not try to cut the thick stems of plants often, as the hairline will run out immediately and you will need to readjust the spool. In hard-to-reach places, the main thing is not to save gas)
Depending on the type of weed, we choose a cutting tool: for soft-stemmed grasses. hair growth line, for carbide and small shrubs. knife. Unscrew the lock nut and install the cutting tool. Tighten the nut. the mechanism is ready to work.
Note. Some grass trimmers do not have interchangeable cutting tools, so you can start using them right away.
How To Install A Universal Trimmer Strap
If the grass trimmer is electric, charge the battery or turn on the engine. If gasoline. fill the tank with fuel. Then, depending on the type of grass trimmer. we adapt it for ourselves (upper motor. hang with a loop on the shoulders, backpack. by the shoulders, lower motor. take by the handle). We hold the grass trimmer over the grass so that the cutting mechanism is parallel to the workpiece. Start the engine.
The trim grass trimmer is done with simple strokes. It is important to remember that the cutter bar of the device rotates counterclockwise so that the cut grass reaches the area already worked. The first is from right to left in front of us (this is how we cut the top of the grass). Second from left to right (this is how we remove the remnants of the grass).
It is better to divide a large area of cultivated area into squares and mow the grass, moving from one to another outside of each square.
When mowing grass on slopes, it is recommended to mow from below, moving parallel to the slope. We got to the edge, came back, got a little higher. and repeat the same route. to completely mow the area.
Brush Cutter Harness
To mow grass in places where trees grow, it is better to use a deforestation mechanism, and mowing is necessary, bypassing the area around the perimeter, bypassing the tree around the trunk.
lawn mower Lynx BTR-52
lawn mower Lynx BTR-52 is a petrol grass trimmer manufactured by Nikkey. This company is the official manufacturer of garden and cottage equipment. These devices are collected in Belarus, and the production itself and the manufacturer’s office are located in the Scottish city of Edinburgh. The described model is very popular and competes with leading European brands.
the lawn mower is universal, equipped with two cutting elements: a fishing line and a knife, if necessary, you can replace one cutting element with another.
- lawn mowing;
- pruning not dense bushes;
- work in the field (mowing weeds and others).
The BTR-52 mower is designed to work on areas up to 700 sq. M.
To avoid overheating of the engine, it is recommended to observe the following operating mode. equal intervals with the engine on and off.
This will prevent the motor from wearing out quickly. The engine on the BTR-52 brushcutter is a two-stroke, single-cylinder, power of 3.1 horses or 2300 W.
»How to set up correctly
Brush your teeth properly after eating
When should you brush your teeth: before breakfast or after? Surely everyone knows that you need to brush your teeth twice a day. Imagine a morning without
How to adjust the lawn mower belt for yourself
Service center specialists often complain about consumers of household garden equipment, who, even at the stage of its assembly and the first start-up, make mistakes and disable the equipment. Of course, there is an instruction in the package, but either it is stupidly written, or it is read after an incorrect assembly, when extra parts were discovered, or, worse, a breakdown occurred. Meanwhile, there is nothing complicated in the assembly of household gardening equipment. You just have to be careful. We will give as an example the assembly procedure for the STIHL FS 130 lawn mower, supplementing our instructions with illustrations.
You need to start the assembly by opening the box and checking the complete set of the unit. If everything is in place, then we have to attach the handle to the bar with the motor, put on the belt, attach the protective cover and cutting elements.
First you need to get the handle and unscrew the thumbscrew that secures the upper part of the support without losing the spring.
We insert the handle into the socket and fix it without tightening too much. We will adjust the final position after the final assembly of the lawn mower.
We put the unit control knob on the handle tube and tighten the fastening bolt. For this, there is a universal key in the kit.
All controls for the STIHL FS 130 petrol cutter are located on the handle. These are: the throttle lever, which has protection against accidental start-up and the switch-off lever of the unit, which is controlled by the thumb. In the modification of brushcutters with a D-shaped handle, the controls are located next to the engine on the boom.
We put a plastic protective cover. If you plan to use only a knife, then for its work we use part of the casing (in the picture it is colored orange).
If work is to be done with a cutting line, then a plastic skirt is additionally put on the protective cover of the chainsaw and a knife is placed to cut the line. Some varieties of this model may have a universal cover or two different covers. one for the line and the other for the knife.
Sliding the skirt over the casing, you need to check the reliability of its attachment. Sometimes it may be necessary to fix this protection with another screw.
Now you need to put a knife for cutting the line and fix it with a screw.
It remains to install the reel, having previously loaded it with fishing line. The coil is screwed onto a shaft (as shown) or fastened with a special nut. Note that the threads on the shaft are usually left-handed. How to thread the line into the reel, read the instructions.
If a knife is required, then we put it instead of a coil. The knife is equipped with a protective cover so that it does not burrow into the soil during operation. After installing it, do not forget to rotate this cutting element and make sure there is no backlash.
Well, the last, the simplest, stage is the installation of a metal clamp on the bar, i.e. suspension strap mounts.
After the lawnmower is assembled, put on a shoulder strap or a backpack harness (whichever is included in the kit) and adjust them to your figure. Fill in the gasoline mixture, start the engine. and go ahead.
Watch how to brush your teeth properly
How to properly brush your dog’s teeth at home Hello! Ya Kulkova Nadezhda Petrovna, senior veterinarian, specialist in veterinary dentistry
Recent Комментарии и мнения владельцев
See how to properly clean pomegranate
How to properly peel pomegranates. Video Description: In hot and sunny Georgia there is such a custom: if a young man is in love with a girl,
Shoulder strap REDVERG
REDVERG 5014460 shoulder strap for hanging the grass trimmer. With hip protection. Bought for Champion grass trimmer.
It is necessary to balance the brushcutter with an installed cutting tool: a disc or a spool with line.
See how to properly clean pomegranate
How to properly peel pomegranates from the peel. Video Description: In hot and sunny Georgia there is such a custom: if a young man is in love with a girl,
Belt adjustment
To provide yourself with comfortable working conditions, you need to be able to properly put on a backpack strap. This process requires some skill, but then, after adjusting the backpack for yourself for the first time, it will be much faster and easier to put on.
»How to set up correctly
How to properly cut grass with a trimmer?
The main thing is to correctly adjust the grass trimmer belt so that the line drum does not crawl along the ground.
Make the right gasoline-oil mixture.
Do not use too thick line. it takes up momentum and overloads the grass trimmer.
Do not wrap too much line on the drum, and do not wind it too much.
Stop and empty the trash from time to time.
Lubricate the grass trimmer cable and the gear train (if equipped) with grease.
The technique of mowing grass with a trimmer is not very complicated and takes into account the need for:
- decide exactly how you are going to mow. Can be folded, can be across.
- choose a place so that a bald patch does not appear as a result and the site looks harmonious
- understand what exactly you are going to mow, and depending on the choice, put the right knife. They are different. For example, hay or weed. You also need to set the speed.
- of course, it is necessary to prepare both clothing and protective equipment. No matter how experienced you are, you must wear glasses. and not forgetting headphones and long clothes.
All the details of the technique are on the video how to mow with a trimmer.
First of all, inspect the area that you have to mow. Cut bushes or large flowers that cannot be cut by yourself.
Always start in an easy spot where there is little grass. Look for slopes or ditches on the property. Easiest to mow across a slope.
Determine the direction of the grass. It is easier to mow if the grass is tilted forward.
When it comes to clothing, you should always wear glasses and boots. Anti-vibration gloves will also work.
Use different knives depending on the density of the grass.
Another tip: try to mow at the same speed. This will help your mower last longer. If you stop and pick up speed immediately, the grass trimmer will wear out faster.
- choose the right line. For different tasks, there are two different items. a fishing line and a knife. A line that is too wide is undesirable as it will overload the grass trimmer. As a rule, there is enough fishing line in a simple area.
- when the cutter is installed (fishing line or knife), it is necessary to tighten and secure the nut.
- check charge or fuel. Put on the belt comfortably.
- the movements when mowing with the trimmer must be thought out. The algorithm is as follows: right-left-left-right. This will give maximum results. And be attentive to your work. It is necessary to control that there are no children or animals near you. You should also wear a mask yourself to protect your eyes.
The first step is to adjust the grass trimmer belt so that the drum does not come into contact with the ground. It is also important to remember that the thick line will overload the grass trimmer, so do not overdo it with the thickness.
Do not wind a lot of fishing line on the drum.
Remember to clean your grass trimmer periodically.
The grass trimmer is very convenient as it can be used in a wide variety of places, including difficult terrain and areas near trees. If you are cutting tall grass, start with the raised tops first and then continue with the bulk.
Use the grass trimmer as directed. An electric scythe (that is, a grass trimmer) is good because it does its job well in hard-to-reach places. Therefore, the grass trimmer can be used near trees, fences in embossed areas. And not only for mowing the lawn, but also for ordinary grass.
The main thing is to make sure that the weeds do not have time to give seeds and mow them on time.
If you did not have time to mow the grass before the moment it gave the ears, then first mow the tops of the spikelets and burn them. And only then mow the grass itself, and put it in compost.
In almost all trimmers (if there are no special ones), the line or the disc rotates clockwise. That is why it is better to mow the grass with a movement from right to left (a movement that resembles the movement when mowing with an iron scythe). Can be mowed by tilting slightly towards mowing.
You need to mow with calm movements, not jerks. Cut grass half the length of the line. If you grip more, the grass trimmer will do the trick, but the grass can clog the space between the spool and tube.
Before mowing the grass, first, adjust the line and secure it well in your cavity so that the line does not hang out and does not go here and there. Next, fill in the fuel accordingly (if you do not have an electric grass trimmer), which consists of special oil and gasoline. Next, start mowing the grass with smooth movements (not fast) to the right and left. Do not try to chop off the thick stems of plants often, as the line will run out in a moment, and you will have to tune the reel again. In dense places, the main thing is not to spare the gas)
Trimmer from the Varyag company koshu according to the instructions:
Step 1. Installing the cutting device.
Depending on the type of weed, we choose a cutting tool: for soft-stemmed grasses. a fishing line, for hard-stemmed and small shrubs. a knife. We unscrew the nut of the cutting mechanism and install the cutting tool. Tighten the nut. the mechanism is ready for operation.
Note: Some grass trimmers do not have interchangeable cutting tools, so you can start using them right away.
Step 2. Preparing the grass trimmer for use.
If the grass trimmer is electric, charge the battery or turn on the motor. If it is gasoline, fill the tank with fuel. Then, depending on the type of grass trimmer, we adapt it to ourselves (upper motor. is hung with a loop on the shoulder, knapsack. by the shoulders, lower. by the handle). Hold the grass trimmer over the grass so that the cutting mechanism is parallel to the area to be treated. We start the engine.
The grass trimmer is mowing with simple movements. It is important to remember that the cutter bar of the device rotates counterclockwise so that the cut grass will fall onto the already worked area. The first is from right to left in front of you (this is how we cut off the top of the grass). The second is from left to right (this is how we remove the remnants of the grass).
It is better to divide a large area of the cultivated area into squares, and mow the grass on them, moving from one to the other along the outer side of each square.
When mowing grass on slopes, it is recommended to mow from below, moving parallel to the sloping area. We reached the edge, returned back, became a little higher. and we repeat the same route. until the site is completely mowed.
For mowing grass in an area where there are trees, it is better to use a line cutting device, and you need to mow, passing the area around the perimeter, bypassing the tree around the trunk.
After the end of the mowing of all the grass in the area, turn off the engine, remove the grass trimmer (for shoulder and backpack devices), clean the cutting mechanism of grass residues.