Hacksaw for metal and wood differences

Saw blades for aerated concrete, wood, metal and drywall. their features and varieties

A hacksaw is a kind of hand saw. No person engaged in home improvement on their own, can not imagine their life without it. Such carpentry and locksmith tool is a handle connected to the working cutting blade, which has sharp teeth.

Saws are divided into several types: wood, metal, aerated concrete (aerated concrete) and drywall. This division is due to the fact that the saws, which have different teeth, as well as the shape of the tool, are designed for different works. For example, a wood hacksaw is capable of cutting not only wood but also aerated concrete and drywall. And a metal tool cuts metal, but can cut through other materials as well.

For wood

The purchase of a wood hacksaw should be approached with caution. They differ in the shape of the saws, handles, and variety of teeth.

A classic hacksaw is also called a regular or wide hacksaw. This saw cuts through wood, lengthwise or crosswise. The saw’s teeth are triangular in shape, spaced 1.5 to 6.5 mm apart. The classic kind quickly cuts wooden products, the only disadvantage is that the carving itself is rough and a lot of shavings remain, but for gardening works will suit perfectly.

Narrow (cupped) is a specialized saw. A hacksaw can have teeth on both sides for a cleaner cut. This tool is designed for carving, when it is necessary to accurately cut out details from wood.

Veneer blade is designed for accurate cutting, when the cut is beautiful and not many chips are left. The teeth of a hacksaw are in the shape of an isosceles triangle. Saw is only used for cross-cutting, the width of the tool is usually no more than 1-1.5 mm.

Types of wood hacksaws are also subdivided according to the shape of the teeth:

But it is not the right tool for cutting laminate. After 20 cuts it will be very difficult to work, because the teeth are already very blunt.


This is a type of saw that is designed for cutting metal structures. This tool can cut wood, aerated concrete, drywall, but is not able to cut stone and concrete.

Metal hacksaw is, of course, better to use as intended and cut only metal structures. The saw includes the following elements: a hacksaw blade, a frame for mounting, and a handle for holding the saw.

The tool blade can be single sided or double sided. The convenience of a double-sided blade manifests itself in the fact that the metal saw blade wears out quickly, it is necessary to constantly renew it, and when there are two sides, it can be done less often.

Inserting the blade into the frame to mount, it is important to do it correctly, otherwise the cutting speed will decrease, and thus you can break the saw.

The angle of professional metal saws can also be adjusted to 45, 90 or 180 degrees.

On aerated concrete and foam concrete

To cut aerated concrete or foam concrete you need to buy specialized tools. These saws have a specific design with a tungsten carbide tip. The teeth of the tool perform a harder plunge into the surface of the material.

A hacksaw for aerated concrete is used for both longitudinal and cross cutting. Saws for foam concrete are represented by three types of cutters:

  • 2-2,5 mm. used for small parts and neat carving;
  • 3-3.5 mm. used for medium size;
  • 4-6 mm. the product is large, difficult to cut.

For drywall

Hacksaw for plasterboard or drywall is used for cutting this material and also with it cut various holes. Such a saw is made of quality steel, so it is almost impossible to break it.

The blade of the drywall saw is thin, the length of the blade does not exceed 20 cm, the tool has a convenient compact handle, so such a saw cuts out various parts and do it accurately.

Blade size and material

Quality blades are made of steel. It is better to use stainless. Hacksaw teeth can be both hardened and regular. The difference between the hardened and conventional ones is that they cannot be restored after wear. Regular saw teeth can be sharpened.

  • mini. produced with a length of not more than 35 cm, has a large number of small teeth;
  • Standard. is no more than 55 cm in length, the teeth are at an average distance from each other;
  • Wide saw with length not more than 60 cm, teeth with increased pitch.

When choosing a size, you should be guided by the purpose for which the tool is intended.

KP top 10 list

BAHCO Superior 2600-16-XT11-HP 400 mm Wood Saws (from 1600 )

A great, sturdy hacksaw. Designed for wood. The manufacturer guarantees the buyer hardened teeth in the design. Their pitch is 11. The handle is fixed. Users, in turn, praise the hacksaw for its long life and almost no deterioration. It is comfortable to work with. It saws medium-sized and small wooden workpieces. Can handle plywood. It will not let you down in other cases as well, but handle it carefully and for its intended purpose.

Basic characteristics: type. wood hacksaw; material of processing. wood; blade length. 400 mm; hardened teeth; tooth pitch. 11; handle. fixed.

Pros and cons

Metal hacksaw Gross Piranha 77600 300 mm (from 976 )

And this tool is designed for cutting metal. It has a good length of 300 mm. It is made of very sturdy bimetal. The blade can be set at an angle of 45 degrees, which greatly simplifies the work for the one who uses the hacksaw. The quality of materials is trustworthy, the model with proper use can last a long time.

Basic characteristics: type. hacksaw for metal; processing material. metal; blade length. 300 mm; material of the blade. bimetal; blades in the set. 1 pc., tooth pitch. 24; handle. fixed; additional information. blade tensioning force. 170 kg; the ability to set the blade at an angle of 45 °.

Pros and cons

Wood saw Zubr Expert 15165-35 350 mm (from 757 )

A tool respected by users. They cite the good quality steel and the sharpness as some of their strengths. The cutter is also easy to carry. There is a holster where it folds up, just like a pistol. With such a tool, you can carry this model with you on a hike or anywhere else. The thickness of the blade is not low, the clamping mechanism is also no problem.

Basic characteristics: type. wood saw; processing material. wood; blade length. 350 mm; blade material. carbon steel; blades in the set. 1 pc.; hardened teeth; tooth pitch. 7; there is a 3D sharpening; handle. fixed.

hacksaw, metal, wood

Pros and cons

Irwin Xpert 10505542 550 mm wood saw (from 1488 )

A model with an interesting design. It features not only good materials, but also a fairly large blade. That is, this tool is quite suitable for working with large elements. Saws are specialized on wood, even wet wood. The cut is easy and smooth. If, for example, the volume of activity is not the largest, then such a thing can replace even a chainsaw.

Main characteristics: type. wood saw; material. wood; blade length. 550 mm; hardened teeth; tooth pitch. 8; handle. fixed.

Pros and cons

Narrow hacksaw for drywall Armero A541/115 150 mm (from 370 )

Specialized small tool. In it you will find good quality and a very affordable price, especially if you take into account the discounts. The hacksaw copes with drywall at a moment’s notice. The blade is hardened, the blade is narrow. such a saw-knife simply cannot perform its basic functions poorly. Handle with protective aluminium insert for safety. The blade tip is pointed, which also adds to its versatility.

Basic characteristics: type. narrow drywall saw; material. drywall; blade length. 150 mm; included blades. 1 pc.Handle. fixed; handle material. rubberized plastic; additional information. pointed end of the blade, a protective aluminum insert on the handle.

Pros and cons

Vira 801400 400 mm Wood Saws (from 389 )

Inexpensive version of the classic look. The saw has a transversal direction. Handle made of rubberized plastic. Main purpose. for dry wood. Indispensable helper in a private or country house. Trimming trees, sawing off wood. a hacksaw can do it all with dignity. It also impresses with its attractive price.

Main characteristics: type. wood serrated cutter; material. wood; blade length. 400 mm; hardened teeth; toothing pitch. 9; sawing direction. transversal; handle. fixed; handle material. rubberized plastic; additional information. for dry wood; blade material. steel Mn65 with hardness 50-56 HRC; blade thickness. 0.9 mm.

Pros and cons

Wood saw Kraftool Katran Fine Cut Carpentry 1-15181-30-14 300 mm (from 1054 )

The look of the hacksaw is immediately striking. It is not like other saws of its kind. But the function is the same. woodwork. The specificity of this saw is explained by its origins. It was invented in Japan. The teeth are hardened and fine. You have to cut carefully and on yourself. If everything is done accurately and correctly, the result will be great.

Basic characteristics: type. wood hacksaw; processing material. wood; blade length. 300 mm; hardened teeth; tooth pitch. 14; there is a 3D sharpening; handle. fixed; handle material. rubberized plastic.

How to choose a hacksaw

Before you buy this tool, familiarize yourself with it. It is not necessary to take the first encountered. How to choose a hacksaw, told “Komsomolskaya Pravda” the handyman Timur Fedoseyev. He pointed out the following points:


The most important and logical point. What you need a hacksaw for. metal, plastic, wood, drywall? There are models for everything on the market. The manufacturer indicates first of all what the tool is intended for. Pay attention to this.


One of the most important technical characteristics in a hacksaw. It is the main working part of the tool and therefore it must be in order. Look at the length of the blade. the longer it is, the larger the piece will grab. But too long hacksaws can make the cutter feel uncomfortable. You should also keep this in mind. For drywall, a miniature blade is usually used. For plywood, some small boards or metal materials, a medium 25-35 cm will do. There is a rule. the length of the saw should be twice the diameter of the element to be processed. Also look at the steel of the blade. it must be of high quality. Thus, carbon steel is considered a good material. It is better to use hardened metal.


Another important component. Blades with large teeth add speed to the work, but the cut will not turn out the neatest. With small ones it is vice versa. the cut is smooth, but you have to be more careful too. Not much speed. Find out what kind of sawing you need. In the cases for longitudinal, they look like hooks. For cross-cutting. isosceles triangles. For mixed cuts, triangular edges are combined with slightly elongated semicircular serrations. The teeth should be sharpened and separated, they should not bend. The large teeth are more suitable for raw wood and other workpieces, the small ones for laminate, particle board, and so on. The same hacksaws for drywall usually use fine teeth. Pay attention to tooth pitch. This indicates the number of teeth per inch of blade length. So, for a clean cut, you need a pitch of 7 to 11. If you need speed, 1 to 7. For your home the optimal choice is 5 to 6. Better if you buy models with hardened teeth as they last longer.


The most important thing is for it to be comfortable. Try the hacksaw in your hand before you buy it. As for the material, it is most often rubberized plastic. There are simply plastic ones. they are less reliable. Also make sure the blade and grip are well secured. It must not bend or fall out.


Spare blade, cover, sharpener, some other elements. All of these are not superfluous. So, with a case or “holster” for a hacksaw you will be more comfortable to transport it, take it with you on a hike or somewhere else. A great option!Choose quality and reliable tools. There are doubts. consult with experts!

These tools have different sizes and shapes of blade, and that defines the purpose of the tool. Different blades are used for rip, crosscut, and mixed cuts. The blade of the universal saw is 450-500 mm, and its teeth are of medium size. It is more convenient to cut branches in the garden with a shortened hacksaw, but it is better to cut logs with a long one.

FatMax 300 mm 11TPI Stanley 2-17-205

This is a cupped hacksaw for precise and straight cuts. It can also be used for making holes in wood. Three cutting edges on each induction hardened tooth for quick and efficient cutting. Two-piece handle gives a good grip for full control. Length of blade is 300 mm.

  • High-quality materials of manufacture;
  • Long life;
  • Low weight;
  • Wear resistance;
  • Easy and quick cuts.

Both straight and curved cuts can be made with this specialized tool.

Bahco 2600-16-XT11-HP

Swedish tool handles a variety of wood substrates. The saw is designed for cross-cutting, but can also be used for longitudinal cutting with experience. Due to the unusual design and long preservation of sharpness of the teeth, Bahco is very popular. The low-friction coating significantly reduces friction during use, resulting in a blade that is less warm and less fatiguing.

The handle of the hacksaw is securely attached to the blade, ensuring safety and comfort of use.

Gross Piranha 24109

Tool is made of high quality steel. Marking on it is 52 HRc, but thanks to multiple hardening the strength index is brought to 66 HRc. Classic triangularly sharpened teeth make it easy to work. Length of the blade is 400 mm and it is Teflon coated. The plastic handle has a rubber insert to prevent the tool from slipping in your hand.

How a hacksaw differs from a saw?

One of the most basic and commonly used types of saws is the hacksaw. It differs from other tools in this group because:

  • It is an extremely hand-held tool. The hacksaw is driven only by reciprocating motion of the craftsman’s hands. While other saws may be electric or gasoline-powered.
  • The hacksaw uses only reciprocating movements, while other saws can be circular.
  • In the usual configuration of such a tool has a single handle for the master to work alone.
  • Has a straight cutting blade for the most part, while other sabre saws may have a chain, band or disk.
  • Hacksaw has only teeth on the working edge, while other varieties may have an abrasive.

Types of Saws

All the variety of hacksaws can be conditionally divided into tools for:

  • Works on wooden surfaces. This includes both universal saw, as well as a hacksaw garden, and some other special varieties.
  • Handles metal surfaces. This group also has its own modifications for craftsmen of different classes.
  • Standard with one handle.
  • There are modifications with a solid frame.
  • A specialized tool is considered a folding hacksaw, which is an attribute of a traveler’s tool kit.

Metal hacksaw

Often professional craftsmen use a special carpentry saw on metal, which has the following varieties:

Wood hacksaw

The greatest number of varieties of hacksaws are for working with wood. Some of the most popular tools are:

Hacksaw for aerated concrete

A special kind of tool is a hacksaw for foam blocks, specially designed to separate or remove excessive parts of aerated concrete. This brittle material requires special tools with hardfacing toothing. Thanks to this technology it is possible to:

  • Extend the life of the tool. Special tips prevent abrasion and tooth wear, so you can cut a large amount of aerated concrete.
  • Hacksaw for plasterboard or wood is much sharper, but it can not be used for foam blocks, since the materials have different density and rigidity. Special tooling simplifies and speeds up the process of splitting blocks into pieces.
  • Eliminate the need to buy expensive electric or gasoline-powered tools for gas silicate work.

saw types

1.1. By function and use

The carpentry saws are characterized by rough kerf at high speed. They are used for wet work, the more so because they create a cut surface that needs sanding for precise work. These saws have a large tooth size with a TPI of 1?6. (about TPI below)

Or a Garlick/Lynx 91 sabre saw.Thomas Flinn 5cm 1TPI. One or two persons can work alone or with one person.

joinery saws are designed for precise, accurate cuts and work well in dry and hardwood.

Shankless: aka hacksaws, aka panel saws. Generally used for longitudinal and cross cuts. For example

A sharpening spike:

Unconventional saws. bailer. essentially a planer with a band saw blade. Extremely handy tool for making longitudinal grooves of a specified depth. Its primary use is for cutting grooves and cleats. Depth of recesses can be of different sizes. Works on any type of rock hardness.

Carpentry saws may have removable blades.

Pictured here. DISSTON D-19. 1914.

Usually have: a thin, small blade. up to 180 mm, fine tooth pitch 20-40 TPI.

Cork saws

These are corkscrew saws. The great thing about these saws is the thinness of the blade for flexibility, small tooth pitch to ensure a clean cut and no set teeth. so as not to damage the surface.

The planes of the teeth coincide with the plane of the blade. That means the teeth do not scratch the surface where the cork is cut.

Saws. for curved cuts

Trekking saws

No knife and axe can replace a saw when camping, hunting and fishing. A camping saw is a must-have addition to your kit and makes it easy to cut firewood. Modern saws for hikers. Compact and won’t take up much space or weight in your gear. And there are some very small ones that you can put in your jacket

Hiking saws as a rule have coarse tooth (3-10 TPI) for possibility to saw the most different kind of wood in the forest, including wet wood. variable-pitch toothed saws work best. Saws come in folding and pistol grip sheaths.

Grip saws in a sheath

Garden Saws

Garden saws are usually used for cutting branches of trees. That is why they can be both short and folding, and on long telescopic handles for convenient work with high branches. Tree pruning tools are used by gardeners when neither pruners nor loppers can do the job. Recall that an ordinary hacksaw is only suitable for cutting dry wood, but on a living plant can leave ugly marks and cause a wound to the tree, which does not heal for a long time. Garden saws, on the other hand, have a special tooth design that is non-traumatic for the tree. The tooth height varies from 5 to 7 millimeters. They have a special sharpening, which allows sawing in both directions, and the distance between the teeth is wide, so the sawdust does not clog.

If the gardener only plans to cut trees crosswise, it is best to choose a cross-cutting tool. There are also folding tools that should be well secured in different positions. On average, each professional gardener has several models of saws in the arsenal: small (for pruning small branches) and large (for cutting large diameter wood).

How to use a hacksaw?

Mechanisms of work with basic locksmith tools, which include a hand hacksaw, are ordinary, but failure to follow them can lead to a breakdown of the saw or a bad cut. The main rules of the reclamation with the tools:

  • Occupation of the master of a comfortable standing position with a firm footing. Arms at the elbow must be bent at a 90º angle.
  • Securely clamping the cutting surface. If possible, the material is better secured in a vise.
  • Hacksaw blade is firmly placed perpendicular to the surface. It is important to exclude all vibrations of the tool to prevent its damage.
  • The tool for metal should be held with 2 hands, while the tool for wood or aerated concrete should be held with one hand.

A hack-saw for aerated concrete

A special kind of tool is hacksaw

for foam blocks, specially designed to separate or remove excessive parts of aerated concrete. This fragile material requires a special tool with hard-alloyed tips on the teeth. Thanks to this technology it is possible:

  • Extend tool life. Special tips prevent wear and abrasion of the teeth, so you can saw large quantities of aerated concrete.
  • Hacksaw for drywall or wood is significantly sharper, but it can not be used for foam concrete, because the materials have different density and hardness. Special tooling simplifies and speeds up the process of splitting blocks into parts.
  • Eliminate the need to take an expensive electric or gasoline devices to work with gas silicate.

Wood saw

Most varieties of sabre saws are created to work with wood. Among their most popular are:

  • Conventional saw, also known as a standard or utility saw. It is a standard tool with a wide cutting blade for straight longitudinal or cross cutting. Number and size of teeth may vary depending on modification.
  • Corkscrew or narrow tool. Differs from the traditional model in that the sawblade is significantly narrower than the. This sawmore maneuverable. It is more convenient to carry out sawing of sheet material on a given contour.
  • Saws have a narrow, curved shank. With such a tool it is comfortable to cut branches of trees and conduct other work in the garden. Some varieties have a special socket for attaching a rod to work on the highest branches.
  • Graduation saw. It is also called a tenoning or cleaving beam. It is used by carpenters or joiners to remove protruding grooves or spikes, in other words for a smooth cut.

Rules of operation

To make the cross-cutting type saw with the maximum convenience, the wood workpieces should extend beyond the edge of the non-moving support. Professionals try to start the sawing process with the nail of the biggest finger on the hand that will hold the beam. As soon as the blade “digs into” the material, it is gently placed on the thumb itself. But for better accuracy of cut it is better to use special templates.

The reciprocating saw is excellent for a longitudinal cut. For this process, the blade must be secured at an angle of up to 90 degrees from a stand that is horizontal. It takes less pressure than a crosscut, so it takes a little more time.

This kind of a cut is made with two hands. Professionals advise to place the board horizontally and work the saw on itself, firmly holding the handle and the stand at the side.

If you need to make a curvilinear cut, then you should buy a narrower blade, so its width should not be more than 8 mm. It is possible to find blades for this kind of cuts with rectangular teeth and considerable height difference. up to 2,5 nominal of the thickness of the blade. If you need to saw too thick material with many knots, it is better to choose the widest blade. up to 5 cm. It is better to have it with not a very big pitch, but a weighty thickness. You should not make a cut like that on this kind of material, like a curved or curved one.

Saws for any type of sawing may differ in shape of teeth. For cross-cutting, the teeth will be in the shape of a regular triangle with equal sides. For sawing lengthwise. a slightly oblique triangle in the form of a wolf’s tooth. On camping trips you will not need to saw wood along the grain. Here the main task is to collect deadwood and cut it into a number of logs.

The effort you have to spend on sawing will depend on the accuracy of sharpening and correct setting of the product’s teeth. When sawing, the teeth will blunt. their edges are usually rounded. The tip of the tooth is blunted the most. To saw with such a product with blunt teeth is one big pain. Before you start using the saw, visually inspect it carefully. Dull teeth will immediately show a light-colored band on the edge, but a well-sharpened tooth will not have such a band.

Read also: Circular sawmill with his own hands at home

hacksaw, metal, wood

It is worth taking a closer look at how to properly sharpen this kind of product. If it is quite old and the height of teeth seriously differs one from another, you need to align them with a special file. Teeth are made smooth before the sharpening process, but after the sharpening process. Sharpening is made with a file in the form of a small triangle. It is not a very difficult handling, but it requires a lot of patience. The tool blade will need to be clamped in a special vise. If you do not have those, the saw needs to be fixed on some firm base. on the edge of a chair or a stool.

Sharpen the teeth one by one through the tooth, first on one side and then on the other side. From the two sides of the tooth a part of the metal will be removed, like a bevel, with an angle of 60 degrees to the blade, which will fit the angle of the file itself, which has 3 faces. From the tip of the tooth it is necessary to remove a little more metal than at the base of the tooth. The sharpening tool can only be pressed forward with a sharp “throw”. The tool will go back a bit looser so the file comes off the surface of the blade a bit.

You should not try the sharpness of sharpening, pressing with your finger on the teeth. then the file may slip on the grease film that you left on the metal by touching.

How to choose a wood saw

At the amateur level in a home workshop it is desirable to take universal hacksaws with a sharpened and hardened tooth

Buying a not bred “dummy” without sharpening, you must be sure that you can do the work yourself, plus it is not superfluous to check the quality of steel blade

What is a saber saw and how to choose it

Now let’s understand how to choose an electric wood saw, in the language of professionals such a tool is called a saber saw. Compared with a hand tool, the selection criteria here are slightly different. So in addition to reciprocating motion the reciprocating saw has a pendulum motion.

To cut trees with a saber saw, the tool has a pendulum mode of operation

The oscillation of the blade according to the pendulum principle allows working much more effectively, for example, when trimming trees or other roughing work. And the standard mode is good for dissolving sheets of different density.

In this case, the question of which wood sabre saw is better will not be quite correct, because in sabre saws the efficiency of the tool depends on the correct choice of blade. There are blades designed for wood, metal, stone, drywall, etc.д.

Each replaceable blade of the reciprocating saw is designed for use with a specific material

hacksaw, metal, wood

But the choice of a sabre saw does not end just with the purchase of a quality blade for the corresponding material, there is a whole range of other subtleties:

  • I, like most handymen in the field, believe that buying an electric hacksaw under 600 watts is just wasted money. With it you will be able to cut twigs up to 20 mm in diameter and no more. From 600 W, up to 1 KW is suitable for diversified countryside works, and the tool with a capacity from 1.2 KW already refers to semi-professional and they can effectively cut any material;
  • It is desirable to choose a model where a special key is not needed to change the blade;
  • It is better to take a tool with a cut depth limiter, which, by the way, can also be adjusted with or without a key, respectively, the second type of sabre saw is more convenient;
  • Pay attention to the head that holds the blade. There are universal models in which any blade can be inserted, and there are heads “sharpened” only for brand-name blades of the given manufacturer. It is not certain that the store will have the right model of brand-name blade, so take the universal one;
  • Theoretically, all saber saws have the possibility of disabling the pendulum stroke, but when buying it is advisable to check how adequately this option works;
  • Sabre saw with a regulator of speed will greatly expand your ability to work, and it is desirable that this regulator had the function of fine-tuning;
  • Another useful feature is considered the ability to turn the blade at different angles, this option is especially useful when working on the ceiling and in hard-to-reach, cramped meta;

Sabre saw with battery has less power compared to cordless models, but it is more convenient to work with

Blade types

Since the archer saw is mainly used when working with wooden products, the following blades for the archer saw for wood are distinguished:

  • Blade with single teeth spaced the same distance apart. These saws are used to cut material smoothly and accurately;
  • Double-toothed (or “Kremlin”) cutting section. This tooth position is designed for a more precise and accurate cut. If the pitch of the teeth is not too frequent, the material will be cut qualitatively and neatly, there will be few chips;
  • A saw blade, the teeth on which are arranged in two rows at a fixed distance. The purpose of such teeth is to work with thick material, which is difficult to cut.

Material from which the cutting blade is made is high quality steel. Preferably, it should be hardened, t.к. This will guarantee a long service life, as well as good, fast work with different kinds of materials.

Also worth paying attention to the teeth on the cutting part of the saw. They come in the following varieties:

  • for dry and hard wood the tool, the teeth of which are in the form of an isosceles triangle, is used, the cut is obtained neat;
  • for dry wood is designed saw blade, the teeth of which are presented in the form of a sided triangle;
  • For raw wood, we recommend alternating teeth in the shape of an isosceles triangle, polygonal, as well as the presence of double teeth, so that the cut is much faster.

Top 5 in the price/reliability ratio

The “onion” range is undoubtedly wide, but there are some brands and types that take the lead. Consider the best of the best, which have a high rating among buyers reviews.

BAHCO 10-30-51

Bow saw with one handle. Features are just great. With a small weight of 900 grams, it can be used for various works. But its main purpose is dry wood processing. The saw blade is up to 76 cm long and has triangular teeth. The tool has a comfortable handle, thanks to which the hand of the master will not slip, the work goes quickly, without delays.

Fiskars 1000615 (124810)

Finnish company Fiskars produces high-quality saws. The saw is made in the shape of a crescent-shaped trapezoid, t.к. long enough (70 cm). This is a must-have for the home.к., Firstly, it has a small weight (770 g), secondly, it has “Kremlin” teeth, which alternate with the usual ones, so you can saw both forward and backward. Also, the device has a very comfortable handle, thanks to which the master does not get tired of the work. Main application is cutting thick branches and small tree trunks.

Stanley Pro 760

760 mm is a bow saw blade, which allows you to cut branches of bushes and small trees. The weight of the device is 250 grams (very light, so it is a pleasure to work with). The teeth are alternately sharpened and the main thing is that they have twin teeth, which allows you to work better and faster. These teeth do not even need sharpening. The handle is easy to grip, so you won’t have any trouble sawing.

TOPEX 530 mm 10A905

The unit has a low cost, so the characteristics are not at a very high level. Of the advantages: the size of the tool blade. 530 mm (this is the standard length), the teeth alternate (there are dual), the weight is 500 grams, you can work with both dry and wet wood. The main and most serious disadvantage is the lack of a comfortable handle, which makes the work more difficult and time-consuming.

Brigadier 83000

Bow saw with good parameters, but lacks a comfortable handle. The advantages include the following: the tool is foldable, so in hikes. an indispensable thing; length. 70 cm, weight. 770 grams, it is convenient to work with branches, as well as dry wood. The price is acceptable. Therefore, if used properly the device will serve for a long time and no problems will occur.

In this article, we gave an idea of the archer saws, considered the best models among the expensive devices, as well as quite cheap. If you found our article useful, leave a comment and share the link on social networks. We will be very pleased!