Hand Circular Saw With The Possibility Of Stationary Installation

Overview of hand-held circular saws with the option of stationary installation
The stationary hand-held circular saw combines mobility and productivity. To set up the saw as a machine, you need legs and clamps.

Cutting depth

This is also an important parameter, although it does not differ very much between large and small saws. Pay particular attention to the maximum cut at an angle. Modern models have the ability to cut by degrees. The value of the cut per degree is always much less than in a straight line, it is this indicator that you should pay attention to when looking for a small hand saw.

Fixed mount for circular

This simple device slightly increases the cost of the saw, but significantly expands its functionality. This is especially true for powerful heavy devices. The stationary mount is:

  • A pair of clamps that fix the mechanism on the workbench;
  • A pair of legs;
  • Plate securing the protection;
  • Clip for the start button (the button is clamped in the "ON" position).

Holes are provided in the upper part of the tool body for fasteners. After installation, three points of support are formed, which securely and firmly hold the saw upward with the cutting teeth. It turns out a mini-circular machine with a working surface equal to the platform. It is very convenient for cutting a large number of small parts.

Overview of hand-held circular saws with the option of stationary installation

A hand-held circular saw is a must-have in the arsenal of everyone involved in construction or carpentry. The most convenient models are those that are installed on a workbench or table and are used stationary.

The first circular saws were developed by SKIL in the 20s of the last century. Since then, the appearance of the instrument has undergone significant changes. Manufacturers are constantly working on improving the design, which to this day withstands fierce competition. What are the structural differences of the tool with a stationary mount and what models are on the market, read on.

Power Tool Care Tips

Don’t forget that you have to deal with a dangerous tool. Because of this, you need to be very vigilant and careful. Only in this case you can not only do a good job, but also protect yourself and the health of your family.

It is necessary to work with a circular saw only in protective clothing, gloves and glasses.

Before plugging in the saw, make sure it is turned off.

If you need to turn the saw on or off, it is advisable to do it at idle speed. If this is done under load conditions, it can shorten the tool life.

Make sure that the load does not exceed the permissible level. To do this, it is recommended to take breaks after every 15-20 minutes of work. This will prevent overheating of the engine.

Make sure the workpiece is securely fixed before operation. It is unacceptable for it to dangle and bend. Otherwise, it can be fraught with serious consequences for you.

Keep the area free of moisture.

Cutting depth

The value of this parameter is found in the range from 0 to 85 mm. The exact figure is determined by the class of the saw. Saws offered today can provide different cutting depths, which are determined by the power of the engine.

Required functions

In order not to be mistaken with the choice of a circular saw, it will be useful consider the presence of the following functions.

  • Soft start capability. This refers to a condition in which the disc begins to reach maximum speed gradually. By means of this function, high starting currents can be prevented, which positively affects the service life of the motor.
  • The ability to maintain a preset speed at any load. If you have to work with high density material, the engine automatically starts to increase the power of work to maintain the preset number of disc revolutions.
  • Anti-jamming protection. The best solution to this problem is the slip clutch. If the disc does jam, the motor will run as before, and the disc will stop rotating. While this option does not prevent kickback from the instrument, it does help to reduce the force, which reduces the likelihood of injury.
  • Motor overload protection. If during operation the load on the motor reaches a peak level, it will automatically shut down, which prolongs the life of the tool.
  • Fast disc brake function. If you disable the button, the disc will immediately stop, which will happen rather quickly.
  • The ability to adjust the rotational speed of the disk. When working with a variety of materials, professionals have to adjust their rotational speed to ensure the most productive cut.
  • The ability to adjust the cutting depth. This option is provided in any modern model of circular saws, the presence of which simplifies the process of setting an accurate depth value.
  • The presence of a riving knife. There is space behind the saw blade for this unit and avoids being jammed by the workpiece.
  • The ability to connect a vacuum cleaner. Any circular saws are equipped with this option. To use it, a special plastic pipe is provided on the tool body. Although when buying, it does not hurt to make sure it is available.
  • The vast majority of saws also have a laser pointer. The owner can get benefit from it if there are no high requirements regarding the quality of the cut.
  • A useful option is the LED, which is able to provide better illumination of the work surface.

Power

This parameter has a value in the range of 400-2000 W. The exact figure is determined by the class and scope of the tool. As the power increases, so does the performance of the saw. This allows the user to spend less time and effort when cutting thick and dense material.

Main characteristics

Considering various models of circular saws for a stationary installation, first of all, it is necessary to pay attention to their performance characteristics, which determine the effectiveness of their use in solving a particular problem.

Power Tool Care Tips

It is necessary to work with a circular saw only in protective clothing, gloves and glasses.

Before plugging in the saw, make sure it is turned off.

If you need to turn the saw on or off, it is advisable to do it at idle speed. If this is done under load conditions, it can shorten the tool life.

Make sure that the load does not exceed the permissible level. For this, it is recommended to take breaks after every 15-20 minutes of work. This will prevent overheating of the engine.

Make sure the workpiece is securely fixed before operation. It is unacceptable for it to dangle and bend. Otherwise, it can be fraught with serious consequences for you.

Keep the area free of moisture.