Checking the condition of the knives
The grass is cut with knives. Cutting elements become dull, damaged, require regular sharpening and replacement. They are referred to as consumables. The use of dull knives will reduce the performance of the tool and increase the load on the engine. To check the condition of the cutting elements, you must first turn off the mower motor. Always use the guards when replacing the blades.
Plastic and metal knives are used to equip the mowers. When choosing cutters, be sure to take into account the features of the vegetation being cut (height, rigidity), the relief of the territory and the power of the tool itself. Make sure the knife is correctly positioned.
A FASTER way to mow your yard!!
Lawn mowing: how the tool should move
The lawn mower can work not only in mowing mode, but also in mulching mode. Scattered mulch (shredded grass) is a natural fertilizer that feeds lawn vegetation.
When turning on the mulching function, make sure that mowed grass and other debris do not accumulate on the tool cover. This is necessary to maintain consistent performance of the lawn mower.
- In mulching mode, operate at maximum engine speed for more efficient blades shredding vegetation.
- Do not cut a wet lawn. Wet grass rolls off, which negatively affects the quality of the mulch.
- When mowing dense, dense grass, work slowly, reduce the cutting width to avoid overloading the power unit.
- For better chopping of the grass, you may have to re-walk the area. In this case, work perpendicular to the direction in which you first moved.
- Change mowing direction every week to prevent balding.
Mulching is a useful function that will help you not only quickly and without worries dispose of the cut grass, but also fertilize the site. Remember to remove the grass catcher when operating in this mode.
Cleaning tools after work
Cutting grass on the engine or in the exhaust pipe can ignite the engine, damage the mower and injure the operator. To prevent the occurrence of dangerous situations, do not neglect the need to clean the working elements of the tool from dirt, crushed vegetation. The cover should be cleaned after each working cycle.
Be sure to disconnect the high voltage wire from the spark plug before cleaning. To avoid inadvertent ignition of the spark plug, ground this wire.
Use a special scraper to clean the bottom of the tool. With its help, you can easily remove mowed vegetation and other debris. Dirt should not accumulate on the working elements of the device. Contamination on the motor leads to the fact that it heats up more, as a result of which its working resource is reduced. Not only the blades and the cover should be clean, but also other parts: wheels, body, handle. Do not leave drips of oil or gasoline on them that may have gotten on during refueling.
The water can be used to wash the mower. Just do not spray with a garden hose. Moisture penetration into the carburetor, air filter, muffler and electrical system elements leads to serious damage, affects the service life of the lawn mower.
Lawn mowing: how the tool should move
How to use the lawn mower correctly? How should the tool move during operation? These and other questions are often asked by users who have just purchased a grass mowing device. To get answers to them, see the instructions for use. As a rule, manufacturers describe in detail the features of the lawn mower. Consider the key recommendations regarding the operation of the tool.
- When to mow? It is recommended to work during the daytime or provided there is sufficient artificial lighting.
- Lawnmower position. When starting the tool, make sure that it is level without tilting to the side.
- How to work safely? Legs and hands should be protected with closed shoes and heavy gloves, respectively. Do not put them under the cutting edges of a running lawnmower.
- If you need to service the device or replace the knife, first turn off the motor and wait until the cutters come to a complete stop.
- First mowing of the lawn. For the first time, the lawn should be mowed when the grass reaches the 10 cm mark.We cut only 2-3 cm, despite the fact that the optimal length of the vegetation is 4-6 cm.
- Subsequent haircuts. With repeated haircuts, you can cut more.
- How often to cut? If you have a parterre lawn. 1 time in 7-10 days, meadow lawn. 2-3 times per season, landscape gardening. 5-6 times per season.
- Haircut scheme. There are several of them. The most common patterns include: back and forth along the entire length, along the perimeter, starting from the edges, ending in the center.
- How to move? Take your time, work slowly, calmly, move evenly. Be extremely careful when cornering.
- How do I mow an incline? Only along the territory. You can’t move up and down. There must be foot supports on slopes.
You must not work without protective equipment. Also, do not start the mower if the safety elements are out of order. When mowing tall grass, the cutting height must be increased to reduce the load on the engine.
During operation, the operator’s hands are exposed to vibration loads that can have a negative impact on health. Take regular breaks to avoid harm. So not only your limbs will be able to rest, but also the instrument.
Under no circumstances should the tool be lifted or carried while the motor is running. If you want to move the device to a different site, turn it off first. Stopping the engine is also required in such cases:
- the tool is left unattended;
- refilling of gasoline is required;
- before removing and cleaning the grass catcher;
- a dirty deck that needs to be cleaned;
- it is necessary to adjust the cutting height;
- after a strong impact (turn off the engine, check the tool for damage, if necessary, carry out repairs, then restart the engine);
- the lawnmower began to vibrate violently.
Close the throttle and fuel cock when shutting off the engine. After the motor has stopped, wait for the cutting elements to stop, then proceed to service, repair or transport the tool.
Preparation for work
The mower is equipped with cutting devices that can injure the operator. To prevent the occurrence of unpleasant situations, it is necessary to properly prepare for work. It is imperative to wear protective equipment: closed shoes, overalls, headphones, gloves, glasses. Things should be clean, without hanging elements. Preparing the tool for work includes the following activities:
- Installing the knife. We work in thick thick gloves so as not to injure our hands.
- Moving the mower to the work site with the engine off.
- Refueling (when it comes to tools that run on gasoline fuel). If a
- spilled gasoline, wipe the device dry immediately.
- Checking the performance of the main components and mechanisms of the lawn mower.
- Adjusting the position of the handle and the height of the harness to suit your height.
- Engine starting. If you have a power tool, simply plug in the plug and
- press the power button. Gasoline units are more difficult to start. Start-up instructions
- mowers are in the operating manual, which you should definitely read
- before starting work.
- Checking the lawn mower operation at idle speed, then at low speed. After you can
- start mowing the grass.
It is also important to look around the area. The fact is that when the tool hits hard objects (stones, branches, twigs, etc.) there is a risk of damage to the cutting element. The knife can ricochet and injure the worker. And also foreign objects, getting inside the tool, provoke the occurrence of complex breakdowns.
How the mower should move when mowing grass?
The lawn mower makes mowing your lawn quick and easy. Unlike a hand-held grass scythe, this tool effectively cuts off excess vegetation at the same distance from the ground, leaving a neat, beautiful green blade behind. When working with this equipment, it is important to be aware of its potential hazards. Failure to comply with the rules of operation can cause injury to the operator, and lack of proper maintenance leads to premature wear of important components.
To achieve the maximum performance of the lawn mower, it is necessary to properly prepare the tool for work, adhere to the manufacturer’s recommendations and safety measures during the mowing process. Let’s consider how the mower should move when mowing grass, how to work with it, how to clean it after work, and also what to do in case of emergency.
Pt 1 How To Cut Tall Grass with Cheap Lawn Mower. Mowing Tall Overgrown Grass
What to do in case of emergency?
Emergency situations occur frequently when working with the lawn mower. It is important to know what to do in such cases. You also need to familiarize yourself with provoking factors in order to avoid trouble. The most common reasons include non-observance of operating rules, ignorance of precautions, the use of low-quality consumables.
Algorithm of actions in case of an emergency when working with a lawn mower.
| Meteorological conditions worsened (rain began to fall, wind rose). | Stop work, put the tool in cover. |
| Work is accompanied by strong vibration, uncharacteristic noises, burning smell. | Stop the engine, carry out diagnostics and carry out repairs. |
| Tool fire | Switch off the engine immediately or disconnect the mower from the power supply. |
| Getting hurt | Stop work, call for help, call an ambulance. |
| Fire breakout | Turn off the tool, call the fire department, try to extinguish the flame yourself before the firefighters arrive. |
Emergencies can be prevented by following the safety rules when working with the mower. The mower is equipped with various safety devices, which should be checked before every start-up. So, for example, if an emergency stop of the tool is necessary, the safety clip must be pressed down. This action will instantly stop the engine and the cutting element.
Test Meadow life around the world
Test rating
Average rating: 4.1. Total ratings received: 1806.
Leave your comment
Most schoolchildren have experienced financial fraud
The digital portfolio will be available to schoolchildren from 2024
The application form for “school” payments was opened on public services
HSE experts suggest calculating teachers’ salaries in a new way
1.5 million children lost a parent, grandmother or guardian due to COVID-19
Half of schoolchildren’s homework will be tested by AI by 2030
Test on the surrounding world on the topic “Meadow natural community
1) fern 2) daisy 3) bluegrass 4) clover
2.Specify the main plant group of the meadow:
1) trees 2) shrubs 3) shrubs 4) grasses
Insert the missing link in the power circuit
Note why large animals do not live in the meadow
How the mower should move when cutting grass
1) on the left. to the right 2) from the center of the meadow to the edges
3) to the right. to the left 4) from the edge of the meadow to the center
1) as a pasture 2) for growing flowers
3) for making hay 4) for collecting medicinal herbs
1) fern 2) daisy 3) bluegrass 4) clover
2.Specify the main plant group of the meadow:
1) trees 2) shrubs 3) shrubs 4) grasses
Insert the missing link in the power circuit
Note why large animals do not live in the meadow
How the mower should move when cutting grass
1) on the left. to the right 2) from the center of the meadow to the edges
3) to the right. to the left 4) from the edge of the meadow to the center
1) as a pasture 2) for growing flowers
3) for making hay 4) for collecting medicinal herbs
Gift certificates
Responsibility for resolving any disputes regarding the materials themselves and their content is assumed by the users who posted the material on the site. However, the site administration is ready to provide all kinds of support in solving any issues related to the work of the site. If you notice that materials are being illegally used on this site, inform the site administration about this via the feedback form.
All materials posted on the site are created by the authors of the site or posted by site users and are presented on the site solely for information. The copyright for the materials belongs to their respective authors. Partial or complete copying of site materials without the written permission of the site administration is prohibited! The opinion of the administration may not coincide with the point of view of the authors.