tiller, certainly is one of the most widely used types of technology to care for your site.
With this unit, you can perform a huge number of different types of work, because this technique can be easily used for plowing, weeding and watering, as well as for moving around the site, picking vegetables and fruits.
In a word, the technique is really magnificent and simply irreplaceable for everyone who wants everything on his site to be just perfect.
There are a large number of different killers, each of which has its own characteristics, specific characteristics and other differences, so you can choose exactly this type of equipment to care for your site, which will seem to you the most attractive.
However, it is worth considering that like any other equipment, Sadko, Don, Huter, Profi, Plowman, Champion, Carver, Husqvarna, Lifan 6.5 and others need constant care, proper use and good attitude. After all, this unit is very similar to a car, therefore, care for it should be consistent.
For more information about the tiller, see the video:
In order for the gearbox, engine, and the entire "body" of the tiller to work correctly and safely, it is necessary to ensure that these vital "organs" of this technique were provided with oil. Indeed, without it, the operation of such an aggregate is simply impossible, because oil is vitally important.
It is necessary to lubricate all moving parts of the motor and gearbox. Without it, these parts of the tiller will constantly overheat and, of course, fail, and if the engine is broken, then, of course, it will be impossible to continue working with this technique.
In addition, the oil protects the engine and gearbox from dirt, debris and corrosion.
Thanks to lubrication, heat is evenly distributed throughout the engine, and is also directed downward, and is not delayed in this part of the tiller.
Therefore, you must take care that your unit was getting oil exactly as much as he needs.
Car oil vs special
The oil itself is it is a natural material, which is enriched with the necessary additives to add the required properties to it: viscosity, high degree of protection. Therefore, the brand of oil for the tiller is important.
But, over time, various oils began to be used for various purposes and machine parts, which differ in their characteristics, have their own characteristics. So, for example, the question is sharply discussed whether it is possible to fill automobile oil in a tiller.
Now a large amount of work is carried out by various agricultural units, which bring significant relief to any farmer. Here you will learn how to make a plow for a tiller with your own hands.
Snowmobiles are an indispensable form of personal transport in the northern regions. Yamaha snowmobiles are a true Japanese quality for the harsh Russian winter.
The purchase of a garden sprayer will be a suitable unit for supplying plants with water. The Maroleks sprayer will be the perfect solution for your garden.
Some believe that it is better to use the recommended products for this type of equipment, and some argue that automobile oils are suitable if they are suitable for viscosity. It is up to you to decide, but we recommend that you choose, nevertheless, specialized oils. This is our answer to the question of which oil can be poured into the tiller.
Sae 10w30 considered excellent modern oil, which is ideal for the tiller engine. The oil itself is universal, that is, it is suitable for all types of engines running on absolutely any fuel.
But in the case of the tiller, this is not relevant, since the motors of these units, as a rule, operate on gasoline and do not differ in high performance.
This oil belongs to the category of semi-synthetic and has an excellent set of various additives that make this lubricant more than popular and popular for tiller.
Thanks to this oil, you can rest assured that the engine will run for a long time and reliably, After all, it has antioxidant properties that protect the motor from decomposition products and stop corrosion.
Another advantage of this oil is that it allows you to work without pre-heating the engine. The sae 30 tiller oil is simply the perfect solution, because it has a whole range of positive properties.
If you do not know which oil to fill in the diesel tiller, then Sae 30 is the ideal option. It is also good for gasoline.
As for the characteristics, the product differs in average viscosity with an index 152, at a temperature of 40 degrees, it is 78 mml / s, and if you increase the heating to 100 degrees, it will be slightly more than 11. Sae 10w30 oil for a tiller is exposed to a good density of –872.
Video: How To Change Oil In A Patriot Lawn Mower Engine
The minimum air temperature at which the engine starts thanks to this magnificent oil is –33 degrees. This is an excellent indicator for this type of technology. This product is, of course, chic tiller oil, the price of which is around 500 rubles per liter.
Given the relatively small consumption, this is enough for a long time. Of course, sae 30 oil for tiller is an excellent solution.
Tiller gear oil is used to gearbox worked fine. It is poured into the gearbox. There are several gear oils for this type of vehicle, but SAE 85w90 is recommended.
This oil has a good viscosity of 16.5 mml / s. This product allows you to work even at low temperatures, because it freezes at 25 degrees. This is a very solid indicator, especially when you consider that tilleries are practically not used in winter. Therefore, this stock is definitely enough for you.
If you still have not decided which oil to fill in the tiller box, choose SAE 85w90.
For the crankcase of the tiller Cayman Vario, Patriot, Texas, Foreman, Crosser, Viking, Forza and other models, it is advisable to use exactly those oils that are recommended by the manufacturer. As a rule, this is due to the number of cylinders in the engine and the level of fuel consumption. Therefore, it is impossible to unequivocally answer the question of what kind of oil is needed for a tiller, more precisely, for its engine.
Pay attention to the manufacturer’s instructions so that the oil is guaranteed to fit. Required pay attention to viscosity and additives. In addition, different types of fuels need their own lubricating fluids. It sometimes happens that oils for different types of fuel are not interchangeable.
What oil you need for the tiller is up to you, so be careful and attentive to your technique.
How to determine the oil level?
Naturally, you do not have to change the oil in your tiller every day or add it. But you must know about how to measure his level, to be able to correctly determine the moment when the oil level is worth increasing. This procedure is performed as follows:
- First you need to unscrew the filler cap of the crankcase of the tiller motor.
- After that, the dipstick must be inserted into the crankcase, then, examine at what level the oil is.
- It should not be lower than the minimum and not higher than the maximum. For the measurements to be correct, insert the probe as shown in the figure. Sometimes it happens that there are no marks on the probe.
- In this case, make sure that the oil level reaches approximately the middle of the measuring tool. Otherwise, add lubricant to the crankcase.
- It often happens that the probe is not at hand. In this case oil level can be determined by eye. Normally, the lubricant in the crankcase of the tiller should be filled almost under the neck, that is, it should be visible. If the oil is clearly less, then you need to add it.
- Tighten the crankcase filler plug as tight as possible so that the oil does not spill out.
How to change?
Naturally, if you saw that there is not enough oil, then you just need to add it. This can be done either through a funnel, or through a hose, or directly from the neck of the bottle into the neck of the crankcase. Oil in the crankcase tiller poured smoothly, without rushing.
After topping up, you need to measure the oil level again to make sure that it is normal. After that, the oil change in the tiller can be considered complete.
To add engine oil, tilt forward a little. To replace the lubricating fluid in the gearbox has a special plug. Please note that it is not necessary to turn or tilt the tiller, as this can lead to oil leakage, as a result of which it can get into the engine cylinders.
Owners of tiller usually change their oil for the first time after 5 hours of operation on their unit, and then change every 25 hours. But preferably change lubricant every spring before first use.
In any case, check that the oil level is sufficient before each use of the tiller.
It is worth considering before you turn off the oil sensor on the tiller, because thanks to it you can also monitor the level of lubricant without any foreign tools.
As we have already said, the oil level must meet two criteria: if you measured the level without a dipstick, top up until the oil is visible to the eye through the neck opening. But, in any case, it is advisable to check the level with a probe.
To do this, simply lower it into the crankcase and make sure that it is normal. This way you can make sure that exactly the amount of oil required for normal operation unit.
Like any other product that is used for the normal maintenance of equipment, oil can cause malfunctions. Consider the most common problems that occur with lubricating fluid for the engine and transmission.
Oil inside the cylinder
It often happens that during operation the tiller leans on its side. Usually the owner does not attach much importance to this, however, in vain. It often happens that oil flows through the valve stems into the engine cylinder. Because of this, the technique may begin to smoke, which obviously will not please the owner of the tiller.
To get rid of this problem, it is necessary to clean the cylinder and candles. Such a problem can also be caused by the fact that the tiller was piled on its side especially when changing the oil. You do not need to do this!
The oil in the cylinder of the tiller is an unpleasant, but quite easily fixable problem.
High oil consumption
But what if the tiller eats oil in liters? Some try in this case just to use a more viscous oil, but this is guaranteed to not help solve the problem. Most likely, it consists in worn piston rings. To solve it, just change the rings.
If the problem persists after the replacement, then it is worth giving the unit for diagnosis, because an increase in oil consumption indicates a malfunction in the operation of this part of the tiller. If no measures are taken, then soon the equipment will begin to smoke, which is clearly not good. Therefore, fix any problem on time.
If you can not do it yourself, then contact the professionals. Timely solution to any technical problem will help you save on a new tiller or engine.
And so, you decide what kind of oil is needed for the tiller. It is advisable to follow the instructions if they indicate the brand of lubricant.
If not, it is better to consult with professionals, they are guaranteed to help determine which oil is better to fill in the tiller to guarantee the protection of the moving parts of the engine and transmission. Also, always make sure how much oil is in the tiller.