How to change the line in the Stihl trimmer

Step two: removing the winding drum (spool) with line

The next step in the process is the removal of the winding drum with line from the inside of the head. You need to turn the head open side to see the line and spool. On the side of the head, find two grooves (eyes) through which the fishing line is brought out.

It is necessary to free the line from the holes by turning the drum. then carefully remove the coil from the head area. The winding drum of some models is spring-mounted. This point must be taken into account when performing the extraction operation.

Procedure for removing the coil of the grass trimmer with a fishing line from the inner area of ​​the head: 1. the head assembly with the coil; 2. remove carefully with a small axial rotation; 3. extracted parts

The old line is completely removed from the reel. To remove the old grass trimmer line, remove the wood from the retaining loops and pull on the free end. This method removes all the old winding. The same process is repeated on the second section of the drum. The master is recommended to use gloves when performing work.

Changing the grass trimmer line: step-by-step instructions for replacing the trimmer line

grass trimmers (they are also lawn mowers) are actively used by modern society for the care of lawns and other similar objects of horticultural farms. The tool is noted for its high efficiency, despite the questionable quality of cutting grass (compared to the usual peasant scythe. earth and sky). The main advantage of trimmers (lawn mowers) is high productivity with low expenditure of physical forces of the operator. However, over time, the grass trimmer’s cutting element (nylon scaffolding) wears out or gets damaged, making the grass trimmer a useless tool as a result. From here, the task becomes urgent. how to replace the trimmer head and how to replace the line of the grass trimmer head? Let’s consider this process using the example of lawn mowers manufactured by “Black and Decker” and others.

Step two: winding the cutting material in sections

The next step is to wrap the line around the reel, being careful. It is necessary that each half is filled with its own winding, evenly, without intersections. Usually, arrows can be seen on the body of the winding reel, indicating the direction of winding. This point should be borne in mind when filling the spool with fishing line.

How To Change Your String On A Stihl String Trimmer Bump Feed

How to replace line on a trimmer?

Replacing the grass trimmer line with step-by-step instructions will allow even an inexperienced lawn mower owner to perform a rather difficult job.

However, before starting work on changing the line on the trimmer, it is necessary to ensure the safety of the work. In particular, measures should be taken to prevent unintentional or unintentional starting of the mower:

  • exclude spontaneous start,
  • remove battery (if applicable),
  • place the tool on a platform convenient for work.
change, line, stihl, trimmer

It is convenient to replace the grass trimmer line when the mower is on the table, and the foreman, who replaces the grass trimmer line, has the ability to approach the tool from any side.

Read more:  How to Wear a Coil On a Trimmer

Step three: complete the head assembly

Pull out the ends of the line through a pair of oval spool slots. Replace both washers and spring (if any) with the supplied new parts. Bend both ends of the line at right angles.

The final technical touch of the process of changing the line on the trimmer is the imposition of the cap on the head, followed by fixation by means of pushing force and slight twisting.

Pass each end into the hole at the base of the winding drum. Install the coil in the inner area of ​​the head, resting on the spring. Put on the cover, align with the base and lightly push downwards with a small counterclockwise rotation, place the cover on the tabs of the clips. This completes the replacement procedure.

Removing the grass trimmer head cover

In the first step of disassembly, the grass trimmer head cover is removed. In the example of Black and Decker trimmer models and others, to remove the cover, it is usually enough to apply some pressure to depress the locking latch that is located on the side of the head body.

On some mower models, the grass trimmer head is initially removed using the Allen key supplied with the tool. The head is usually held in place by two to three screws, which are accessed through the side holes of the rear decorative cover.

The head cover, where the line spool is installed, is usually held by a latch-tongue. It is enough to squeeze the latch tab with some effort and turn the lid slightly, after which the lid can be easily removed

How to rewind your Stihl trimmer.

When releasing the locking tab, slightly turn and lift the cover of the grass trimmer head to remove the winding drum.

Changing Line In Trimmer STIHL Fse 52

grass trimmer DAEWOO Power Products DABC 420

Petrol grass trimmer TRANSMISSION FBC-451/2200

Gas grass trimmer-reducer, 26mm, square, Sturm!

Electric grass trimmer FORWARD FGT-230/1500

Carver GBC-043MS grass trimmer 1250 W / 1.7 HP.

STIHL grass trimmer reel (FS 38, 45. FSE 60, 71, 81).

petrol front grass trimmer FBC-521/2600

petrol front grass trimmer FBC-261/1100

petrol front grass trimmer FBC-522/2600

petrol front grass trimmer FBC-521/3000 Main

Electric grass trimmer FORWARD FGT-230/1200

petrol front grass trimmer FBC-522/3000 Main

Garden grass trimmer Smallcut plus 350/23 (09806-20.000,00)

Changing the line in the trimmer: 2 easy ways

a grass trimmer is a necessary and useful tool for a summer cottage and a private house. Many people own and actively use it, but not everyone knows how to replace the line in the trimmer, especially at first.

In this instruction, we will walk through the entire replacement process step by step. Looking ahead, there are two ways to line the trimmer spool. There is no fundamental difference. the difference lies in the fact that in the first case one line will be refueled, folded in half, and in the second there will be two such lines.

From an old wind instrument, I cut a piece of copper tube 25 mm long with an inner diameter of 27 mm. With the help of emery and a file, I removed the ends.

Then, with a light hammer blow, he pressed the tube against the plastic housing of the pressure hose.

From a birch stick, he cut a pipe 10 mm long with an outer diameter of 27 mm. and also pressed it against the brass tube from above, up to the sleeve.

To secure the structure, he tilted the tube around the plastic with a sharp rod and used a hammer to press the edge along the wooden cork.

Transmission benzotrimmer, 26mm, 7 tooth

Gas grass trimmer-reducer, 28mm, 9 teeth, Sturm!

Changing Line In Trimmer STIHL Fse 52

grass trimmer DAEWOO Power Products DABC 420

Petrol grass trimmer TRANSMISSION FBC-451/2200

Gas grass trimmer-reducer, 26mm, square, Sturm!

Electric grass trimmer FORWARD FGT-230/1500

Carver GBC-043MS grass trimmer 1250 W / 1.7 HP.

Method 2. two segments

fundamentally no different from the method The only difference is two wound pieces of fishing line, instead of one.

There are two special fixing sockets on the coil (see picture above).

They cling to it with a hook formed earlier on the fishing line, and begin to wind the fishing line.

Read more:  Husqvarna Trimmer Faults 125 R Video

Winding is carried out in a special order

The winding must be carried out in the following order: first the lower line, i.e. the one that is closer to the fixing holes at the bottom of the coil, and only then the top one, i.e. the one that will overlap the bottom section.

The tips are cut into the holes in the grass trimmer spool body. They are pulled up until they click, which means that the line has come out of the latches.

The tips are threaded into the holes in the grass trimmer spool body

The coil is fastened into the body. The line in the spool has been replaced.

Stihl Trimmer Line Replacement

Step two: removing the winding drum (spool) with line

The next step in the process is the removal of the winding drum with line from the inside of the head. You need to turn the head open side to see the line and spool. On the side of the head, find two grooves (eyes) through which the fishing line is brought out.

It is necessary to free the line from the holes by turning the drum. then carefully remove the coil from the head area. The winding drum of some models is spring-mounted. This point must be taken into account when performing the extraction operation.

Procedure for removing the coil of the grass trimmer with a fishing line from the inner area of ​​the head: 1. the head assembly with the coil; 2. remove carefully with a small axial rotation; 3. extracted parts

The old line is completely removed from the reel. To remove the old grass trimmer line, remove the wood from the retaining loops and pull on the free end. This method removes all the old winding. The same process is repeated on the second section of the drum. The master is recommended to use gloves when performing work.

change, line, stihl, trimmer

Installing a new line on the grass trimmer reel

Fitting a reel with a new line is carried out in the reverse order. The procedure looks something like the following, regardless of the lawn mower model:

Step three: complete the head assembly

Pull out the ends of the line through a pair of oval spool slots. Replace both washers and spring (if any) with the supplied new parts. Bend both ends of the line at right angles.

The final technical touch of the process of changing the line on the trimmer is the imposition of the cap on the head, followed by fixation by means of pushing force and slight twisting.

Pass each end into the hole at the base of the winding drum. Install the coil in the inner area of ​​the head, resting on the spring. Put on the cover, align with the base and lightly push downwards with a small counterclockwise rotation, place the cover on the tabs of the clips. This completes the replacement procedure.

How to replace line on a trimmer?

Replacing the grass trimmer line with step-by-step instructions will allow even an inexperienced lawn mower owner to perform a rather difficult job.

However, before starting work on changing the line on the trimmer, it is necessary to ensure the safety of the work. In particular, measures should be taken to prevent unintentional or unintentional starting of the mower:

  • exclude spontaneous start,
  • remove battery (if applicable),
  • place the tool on a platform convenient for work.

It is convenient to replace the grass trimmer line when the mower is on the table, and the foreman, who replaces the grass trimmer line, has the ability to approach the tool from any side.

How to fill the line in a lawn mower: how to change and load into a reel, how to change and how much to wind in a grass trimmer

When spring comes, people often spend their free time at their summer cottage. They try to rid their area of ​​problems such as weeds and grass with the onset of warm days. It is difficult to do this manually, especially if the area is very large, so a lawn mower will help. Thanks to this technique, you can trim the grass and remove weeds. it is a suitable device for mowing unnecessary plants near the fence, at home, between rows in the garden on a flower bed, and so on. Read about how to choose the right mower for your needs here. The cutting element in this device is a fishing line (strong polyethylene thread), which is wound on a special element. a spool. But over time, the line wears out and it becomes necessary to replace it. The article will talk about how to fill the line in a lawn mower.

Read more:  Husqvarna Trimmer Oil / Gas Ratio

Changing the line in the trimmer (lawn mower)

Many owners of garden brushcutters are perplexed by the question of replacing the line in the trimmer head. Sometimes this turns into a whole problem that can render not only the tool, but also the mower inoperative. To prevent such a situation, we will analyze step by step the process of replacing the cord (line) in the nozzle.

We remove the nozzle from the gearbox. To do this, it is necessary to combine the side hole of the lower figured washer and the recesses on the axle, insert a screwdriver and fix the shaft from scrolling. Then you can unscrew the nozzle. It should be remembered that the thread on the shaft has a left-hand thread, respectively, the element must be unscrewed by turning it to the right.

The next step is to disassemble the body of this unit. Typically, the cover is attached through the slotted holes using latches. To open it, you need to sink the latches into the case and squeeze the edges of the lid. If the nozzle has an automatic or semi-automatic line feeding mode, it means that there is a spring inside, which may fly out during disassembly. Therefore, we hold all the parts with our free hand and carefully lay them out on the surface.

Now we take the fishing line, measure out 5 meters and cut off this piece. It is not recommended to wind a cord with a diameter greater than the value specified in the instructions for the tool. Otherwise, you can get an increase in engine load and increased fuel consumption. Fold the line in half to find the middle and get this “loop”.

On the spool, in its middle part, there are 2 notches located opposite each other (instead of notches there can be holes). We hook the “loop” into one of the grooves and start winding the line counterclockwise. If the reel has two compartments, then the winding goes separately for each branch of the line. Leave the last 15-20 cm of cord free and clamp both ends through the notches at the top of the coil.

We collect the feed elements (spring and washer) in the nozzle and bring the free ends of the fishing line into the holes on the body. We put on the cover, snapping the latches into the corresponding grooves. After that, we pull out the free play of the cord.

It remains to screw the nozzle into place, proceeding in the same way as in the first step. Only now, in order to twist the element, it is necessary to move it counterclockwise. Here is such a simple instruction will help you quickly replace the line of the grass trimmer, without spending much effort looking for other solutions.

Step one: securing and laying

Fold the end of the line in half. Place a blank over the spool on each side of each half of the winding zone. Wrap both halves completely around the winding drum. Pull the line through the loop.

The procedure for preparing the line engagement in the area of ​​both winding sections of the drum. The loops are placed in specially made cutouts, after which the line is wound in each zone

It is enough to pull the line tightly and plant the knot in the groove made on each side of the winding drum.