Alternative ways
As mentioned, the stationary circular saw is very handy for quarter selection. (There is a separate article on the types of circular saws and the features of their choice on our website.) But it is not always in the arsenal of the master, and sometimes it is impossible to use it purely physically.
If you need to select a quarter in thick long boards, you can use a hand-held circular saw. The manufacturing principle and the sequence of operations are the same. The difference is that in this case the board to be processed and the tool are swapped. The board is fixed motionlessly, and the master moves the circular saw with a parallel stop manually.
If you do not have a circular or hand-held circular saw at hand, you can use an angle grinder with a disc for wood or a hand router with a suitable cylindrical cutter. Both methods are very slow and not suitable for a large amount of work. In addition, choosing a quarter angle grinder is inconvenient, dangerous and it turns out uneven..
Another way is to use an electric plane. However, most modern models of planers, due to the design features, are not suitable for this. Watch the video, which shows just this way of choosing a quarter..
Methods for making a quarter
You can select a quarter using several methods using different tools. For instance:
- electric plane,
- milling cutter,
- hand-held circular saw,
- stationary circular saw.
The last method – choosing a quarter with a circular saw – is the most convenient and productive. And consider it.
If you need planed boards, then it is more convenient to stitch the boards first and only then proceed to making a quarter.
What does drying out lead to
A typical case: you made a shed in your country house for storing household equipment and for other needs. They did it for themselves, so they rallied the boards from which the walls are made, carefully, without the slightest crack. Two to three months pass; the boards dry up and the whole wall glows with cracks. In winter, snow blows through them, in summer the wind brings dust inside the barn.
Shrinkage reaches 10-13% of the linear size. That is, a board with a width of 100 mm after drying is reduced to 88 mm.
To prevent this from happening for wall cladding, you need to use boards with a quarter. A wall sheathed with such boards will never have through cracks. With their quarters, adjacent boards overlap each other and when the through cracks dry out, no more appears.
Unfortunately, lumber is very rarely sold with a quarter ready. Therefore, the amateur master should know the ways in which the boards are modified if necessary..
Cutting a quarter with a circular saw
Choosing a quarter in a wooden part is one of the most frequent operations in joinery and carpentry. Why this is done and how it is discussed further.
Wood, like any material, has specific properties that must be taken into account. This obvious fact, however, is often ignored by beginners. As a result, spoiled mood, time spent on rework, and often spoiled material.
One of the characteristic properties of wood is that when the humidity changes, the linear dimensions of the wooden part change. When dry, the wood shrinks, and expands with increasing moisture. In addition, resin evaporates from the wood over time. Because of this, the wooden part gradually decreases in linear dimensions, regardless of changes in humidity. They say about this phenomenon: the tree dries up. These effects are especially noticeable in softwood, from which the most common sawn timber is made..
In construction and dachas, spruce and pine boards are most often used. These woods change size the most when dry..
Quarter selection sequence
- We adjust the overhang of the saw blade so that the cutting depth is equal to half the thickness of the processed board. The easiest way to do this is right in place. To do this, we attach the board to the saw blade from the side, as shown in the photo, and adjust the overhang of the blade..
- We install a parallel stop on the machine so that the cut width is also equal to half the thickness of the board. We take into account the thickness of the disc itself. This completes the machine setup..
- Making longitudinal cuts from opposite sides of the board.
- We make cuts from the ends of the board. A quarter is ready. We get glazing bead as a by-product)).
How to Resaw Lumber with a Band Saw | Rockler Skill Builders
A Few Tips
- Don’t forget about safety.
- If the boards are long, work with an assistant.
- Boards must be of the same thickness.
- Do not use freshly cut sawn timber. Let them dry for at least 1 year.
In the next articles, we will continue the story about woodworking techniques and the tools used..
A Few Tips
- Don’t forget about safety.
- If the boards are long, work with an assistant.
- Boards must be of the same thickness.
- Do not use freshly cut sawn timber. Let them dry for at least 1 year.
In the next articles, we will continue the story about woodworking techniques and the tools used..
Electric planer. how to choose a quarter in the board
The electric plane is a handy tool for woodworking. With its help, you can evenly cut wood and get a product of the required shape. How to choose a quarter in a board with an electric plane? The process is no different from working with a circular saw. The only thing that can be an advantage of working with this particular tool is ease of use and a clearer vision when performing a task..
Such works will help you to independently make a quality product from a cheaper product, which is perfect for decorating and decorating a room, both inside and outside..
Alternative ways
As mentioned, the stationary circular saw is very handy for quarter selection. (There is a separate article on the types of circular saws and the features of their choice on our website.) But it is not always in the arsenal of the master, and sometimes it is impossible to use it purely physically.
If you need to select a quarter in thick, long boards, you can use a hand-held circular saw. The manufacturing principle and the sequence of operations are the same. The difference is that in this case the board to be processed and the tool are swapped. The board is fixed motionlessly, and the master moves the circular saw with a parallel stop manually.
If you do not have a circular or hand-held circular saw at hand, you can use an angle grinder with a disc for wood or a hand router with a suitable cylindrical cutter. Both methods are very slow and not suitable for a large amount of work. In addition, choosing a quarter angle grinder is inconvenient, dangerous and it turns out uneven..
Another way is to use an electric plane. However, most modern models of planers, due to the design features, are not suitable for this. Watch the video, which shows just this way of choosing a quarter..
Cutting a quarter with a circular saw: how to make a cut, methods
Choosing a quarter in a wooden part is one of the most frequent operations in joinery and carpentry. Why this is done and how it is discussed further.
Wood, like any material, has specific properties that must be taken into account. This obvious fact, however, is often ignored by beginners. As a result, spoiled mood, time spent on rework, and often spoiled material.
One of the characteristic properties of wood is that when the humidity changes, the linear dimensions of the wooden part change. When dry, the wood shrinks, and expands with increasing moisture. In addition, resin evaporates from the wood over time. Because of this, the wooden part gradually decreases in linear dimensions, regardless of changes in humidity. They say about this phenomenon: the tree dries up. These effects are especially noticeable in softwood, from which the most common sawn timber is made..
In construction and dachas, spruce and pine boards are most often used. These woods change size the most when dry..
What does drying out lead to
A typical case: you made a shed in your country house for storing household equipment and for other needs. They did it for themselves, so they rallied the boards from which the walls are made, carefully, without the slightest crack. Two to three months pass; the boards dry up and the whole wall glows with cracks. In winter, snow blows through them, in summer the wind brings dust inside the barn.
Shrinkage reaches 10-13% of the linear size. That is, a board with a width of 100 mm after drying is reduced to 88 mm.
To prevent this from happening for wall cladding, you need to use boards with a quarter. A wall sheathed with such boards will never have through cracks. With their quarters, adjacent boards overlap each other and when the through cracks dry out, no more appears.
Unfortunately, lumber is very rarely sold with a quarter ready. Therefore, an amateur master should know the ways in which the boards are modified if necessary..
Quarter selection sequence
- We adjust the overhang of the saw blade so that the cutting depth is equal to half the thickness of the processed board. The easiest way to do this is right on site. To do this, we attach the board to the saw blade from the side, as shown in the photo, and adjust the overhang of the blade..
- We install a parallel stop on the machine so that the cut width is also equal to half the thickness of the board. We take into account the thickness of the disc itself. This completes the machine setup..
- We make longitudinal cuts from opposite sides of the board.
- We make cuts from the ends of the board. A quarter is ready. We get glazing bead as a by-product)).
Methods for making a quarter
You can select a quarter using several methods using different tools. For instance:
- electric plane,
- milling cutter,
- hand-held circular saw,
- stationary circular saw.
The last method – choosing a quarter with a circular saw – is the most convenient and productive. And consider it.
If you need planed boards, then it is more convenient to first stitch the boards and only then proceed to making a quarter.
How to choose a quarter in a circular board
Lumber processing options
Let’s figure out how to choose a quarter in the board with our own hands. We buy a board of 2 grade and process it in a convenient way. How can this work be done:
- electric plane;
- circular;
- hand milling cutter;
- Angle Grinder.
After purchasing the required amount of lumber, the easiest way to select a quarter in the board is to use a circular saw or an electric planer. It remains only to give a neat shape to the edges of the product..
First, you need to make a cut from the end of the board, half the height, and then – in the center of the end. Then we set the width of the working part of the board and saw through another fragment. Here, the depth should be 1.5 times more than half the height, so that it is more convenient to remove the sawn-off part. Thus, you can form a finished product with your own hands twice as expensive as the original..
Despite the production of raw materials of the second grade, the quarters have excellent characteristics:
- strength;
- thermal insulation properties;
- visual appeal;
- the possibility of decorative use;
It is possible to use this material for external cladding.
How to choose a quarter on the board
By spending a little more time, you can significantly reduce your material costs. That is, the volume of work will increase, but the benefits will also be noticeable. It is absolutely not necessary to buy grade 1 material – by choosing grade 2 wood, it is easy to independently give it the desired look in a fairly short time.
A circular saw
Such a saw, used when processing a board, can simplify the process and shorten its duration. If the technique is powerful and reliable with sharp knives, it will not be difficult to set the required parameters..
The scheme of work does not fundamentally differ from the previous ones, it differs only in that the wood processing is carried out with a circular saw.
Plain Sawn vs Quarter Sawn
Electric planer
It is convenient for them to cut the boards and shape them. The process of getting a quarter board is no different from working with other equipment, but the plane is better because of its convenient operation. This device provides an open view of the board’s working surface.
In the absence of a circular and a planer, an angle grinder with a disc for wood or a hand-held milling cutter, on which a cylindrical cutter was previously installed, is suitable for work. But both options are distinguished by low productivity, that is, they are unlikely to be suitable for processing a large volume of material due to the low speed..
With these tools, inexpensive lumber can be easily converted into quality products suitable for interior and exterior decoration of buildings..
Methods for making a quarter
- electric plane,
- milling cutter,
- hand-held circular saw,
- stationary circular saw.
The last method – choosing a quarter with a circular saw – is the most convenient and productive. And consider it.
If you need planed boards, then it is more convenient to stitch the boards first and only then proceed to making a quarter.
Electric planer. how to choose a quarter in the board
The electric plane is a handy tool for woodworking. With its help, you can evenly cut wood and get a product of the required shape. How to choose a quarter in a board with an electric plane? The process is no different from working with a circular saw. The only thing that can be an advantage of working with this particular tool is ease of use and a clearer vision when performing a task..
Such works will help you to independently make a quality product from a cheaper product, which is perfect for decorating and decorating a room, both inside and outside..
How to choose a quarter on the board
Knowing some tricks, you can save a lot on construction. True, you will have to spend a little more time, but when working on a large scale, the savings will be significant.
The most common way to reduce the cost of purchasing lumber is to buy second-rate products to give them the desired look with your own hands.
How to choose a quarter on the board yourself? To get started, get a board of 2 grades. You can do this on the website of our company Mosbrostorg. Our prices will help you keep your budget, but still get the right amount of material.
After purchasing a board of a simple configuration, you can select a quarter in the board using a circular saw or an electric planer. Then carefully arrange the edges and now you have a product, the price of which is twice as high.
The work begins with the fact that a cut is made from the end of an ordinary board with a depth equal to half the height, and then a cut is made in the middle of the end. Next, measure the width of the future product with a ruler. The depth should be twice more than half the height due to the fact that then the sawn-off part will have to be removed.
The quarter board has the following characteristics:
- excellent thermal insulation;
- aesthetic and presentable appearance;
- great attribute for decoration;
- excellent material for exterior cladding.
Alternative ways
As mentioned, the stationary circular saw is very handy for quarter selection. (There is a separate article on the types of circular saws and the features of their choice on our website.) But it is not always in the arsenal of the master, and sometimes it is impossible to use it purely physically.
If you need to select a quarter in thick, long boards, you can use a hand-held circular saw. The manufacturing principle and the sequence of operations are the same. The difference is that in this case the board to be processed and the tool are swapped. The board is fixed motionlessly, and the master moves the circular saw with a parallel stop manually.
If you do not have a circular or hand-held circular saw at hand, you can use an angle grinder with a disc for wood or a hand router with a suitable cylindrical cutter. Both methods are very slow and not suitable for a large amount of work. In addition, choosing a quarter angle grinder is inconvenient, dangerous and it turns out uneven..
Another way is to use an electric plane. However, most modern models of planers, due to the design features, are not suitable for this. Watch the video, which shows just this way of choosing a quarter..
How to choose a quarter circular
Using a circular saw to make a quarter board will make the process much easier. A good quality tool with sharp circle blades and good power will help you a lot. After all, now you can set the necessary values and not be afraid to cut off the excess.
How to choose a quarter in a circular board? The process does not differ much from the usual one, the only thing is that you now have a circular saw in your hands. From the end of the board, a cut is made with a depth of half the height of the board. Next, a second cut is made in the center of the end. Next, we take the necessary measurements and cut it so that a quarter takes on the required shape.
How to choose a quarter on the board
Knowing some tricks, you can save a lot on construction. True, you will have to spend a little more time, but when working on a large scale, the savings will be significant.
How to choose a quarter on the board yourself? To get started, get a board of 2 grades. You can do this on the website of our company Mosbrostorg. Our prices will help you keep your budget, but still get the right amount of material.
After purchasing a board of a simple configuration, you can select a quarter in the board using a circular saw or an electric planer. Then carefully arrange the edges and now you have a product, the price of which is twice as high.
The work begins with the fact that a cut is made from the end of an ordinary board with a depth equal to half the height, and then a cut is made in the middle of the end. Next, measure the width of the future product with a ruler. The depth should be twice more than half the height due to the fact that then the sawn-off part will have to be removed.
As a result, from second-rate raw materials you will get a product that will differ in its positive properties..
The quarter board has the following characteristics:
- excellent thermal insulation;
- aesthetic and presentable appearance;
- great attribute for decoration;
- excellent material for exterior cladding.
Lumber processing options
Let’s figure out how to choose a quarter in the board with our own hands. We buy a board of 2 grade and process it in a convenient way. How can this work be done:
- electric plane;
- circular;
- hand milling cutter;
- Angle Grinder.
After purchasing the required amount of lumber, the easiest way to select a quarter in the board is to use a circular saw or an electric planer. It remains only to give a neat shape to the edges of the product..
First, you need to make a cut from the end of the board, half the height, and then – in the center of the end. Then we set the width of the working part of the board and saw through another fragment. Here, the depth should be 1.5 times more than half the height, so that it is more convenient to remove the sawn-off part. Thus, you can form a finished product with your own hands twice as expensive as the original..
Despite the production from second-grade raw materials, the quarters have excellent characteristics:
- strength;
- thermal insulation properties;
- visual appeal;
- the possibility of decorative use;
It is possible to use this material for external cladding..