How to cut a dry tree beautifully. Tilt

How to cut a chainsaw tree in the right direction: an overview of the main methods

Large and beautiful trees are usually decorating the site near the country house, but often there are cases when the tree begins to interfere and it needs to be cut off. Next, we will consider how to cut a chainsaw tree correctly in the right direction. what tools and materials will be needed for this, how to choose the right place for falling the barrel, and how to choose the right method of rolling wood.

tree, tilt

Dry dead tree !! Cut down the roadside trembesi tree, Stihl ms 881 chainsaw.

Just know how to cut down a tree so that it falls in the right direction, is not enough. At a minimum, for such work, the necessary physical qualities are needed for this: a high level of coordination of movements, flexibility, strength, endurance. Ideally, it is also advisable to add experience in sawing wood and drilling branches here. If all this is, then you can proceed to the preparatory stage. the preparation of the necessary tools and materials.

Before starting cutting, it is necessary to prepare a regularly working chainsaw with normal chain tension, good sharpening of the links and a serviceable lubrication system. In addition, you will need to wear comfortable shoes on non.slip soles with a deep tread, strong work clothes, gloves and protective glasses or a shield. Prepare a climbing insurance system or an assembly belt if you plan to cut down a tree with dropping or hinging. The rope is also useful in the work: it is needed to send a cutting tree falling.

Due to great noise pollution, when working a powerful chainsaw, it is recommended to insert Berushi into the ears or put on special noise-protective headphones. To protect yourself from the fall of branches from above, you should protect your head helmets.

tree, tilt

Correct cutting of a tree

To correctly cut the trees with a chainsaw, you need:

  • Choose the side into which the tree should fall, and the height of the cutting;
  • cut the branches (so that the branches do not injure the roller when falling a tree, you need to first cut them so that from the height of human growth and to the ground the trunk is naked);
  • make the upper file in the barrel (produced at an angle of 45 ° to the ground, its depth should be equal to a quarter of the trunk diameter, no more);
  • perform the lower file (it is made horizontally so that its end is connected to the edge of the first file, and a triangular wedge.shaped piece is separated from the tree);
  • make the third, the gross fed (produced from the opposite from the other two filings, is performed horizontally, parallel to the lower file, 5 cm above it);
  • extract the working part of the saw from the saw and quickly move to a safe distance from the cutting wood (the lower part of the falling trunk may jump due to inertia to one and a half meters).

Sniffening branches

To correctly cut down the tree with a chainsaw, you need to cut off the interfering branches. To do this, you have to use a stepladder. It needs to be installed so that it is between a cut branch and a tree trunk. If the branches are large, before the start of the cutting, the assistant must tie the rope to the target branch at a distance of 1-1.5 m from the barrel.

Crown trimming should be carried out from the bottom up: so the trimmed branches will fall down freely.

There is an opinion that preliminary cutting of branches from the lower part of the tree is for the most part for its correct balancing. For this reason, the twigs from the desired falling of the trunk are not necessary to saw off.

Deviation First: how to cut a tree. Instructions

First you need to examine the tree itself and the territory surrounding it and choose a place where the fallen barrel will fall.

If the tree is curved, tilted in some direction, its branches grow not evenly and not symmetrically or the trunk has not a round, but a flattened, elliptical shape, then you need to bring down the barrel towards curvature or tilt, towards the greatest development of branches or a smaller diameter of the elliptical trunk.

Step one: Drink the wedge

After the direction of the roll is chosen, the first cut is made. at an angle of 45 degrees to the horizontal surface from the side in which the trunk is planned to be planned.

Sawed at an angle of 45 degrees. Photo from the site Leroymerlin.ru/

Then the horizontal cut is made to the connection of it with the inclined to remove the wedge. Sawed is made to a depth of 1/4 from the diameter of the barrel. After that, the wedge is removed: there will be a “bend”. the barrel will “turn out” towards the drunk wedge.

After making sure that in the zone of the alleged fall of wood there are no strangers, animals and valuable objects that may suffer when falling, we proceed to the next stage.

Step two: gross drinking

Another cut is made with the opposite to the side of the party. the gross. It is made horizontally to a depth of about 2/3 from the thickness of the barrel, but 20-50 mm above the horizontal cut from the drunk wedge.

The gross drank. Photo from the site Leroymerlin.ru/

It is important not to cut the barrel completely. then the trajectory of the fall of the trunk will be unpredictable. It is necessary to leave the unfinished, the thickness of which will be approximately 1/10 from the thickness of the barrel.

After that it remains to take the last step.

Step Three: we dump the tree

A wedge is inserted into the gross drink. wooden or plastic, and the trunk falls in a given direction. Sometimes the use of the wedge is not required. in case the calculation of the length of the drink is accurate. After you hear the crack of a breaking tree, you need to move to a safe distance in the direction opposite to the fall of the tree.

Insert a wedge into the gross drink. Photo from the site Leroymerlin.ru/

That’s how just everything is described in the instructions. The main thing is to observe safety precautions and the rules.

How to cut down a tree. Practice

Our tree was inclined. The angle of deviation of the barrel from the vertical was about 10 degrees. And all his branches were also directed towards the slope. The instructions prompts to bring down the tree towards the slope. And towards the main direction of branches.

True, in the same instructions it is written that the place of falling the trunk should be directed away from what may be damaged when falling. The tree was tilted towards the garden, and we did not want it to break the apple tree when falling.

The photo shows what small four-five-meter apple trees compared to the tree alleged to Spee. It is on the right.

Therefore, we decided to make a delay in the opposite side of the garden so that the tree fell against the slope, away from the garden. You can also read the instructions on the Internet about leather.

We sawed it-sawed day the first

On the appointed day “D”, we once again examined the territory around our tree. After an hour and a half of exercises with throwing a rope on a tree, the spouse finally threw it to the place that was outlined to fix the stretching.

They fixed the rope, stretched it out with the help of a delayed mechanism on a belt to fix the goods to a tree growing twenty meters from the doomed dry. Since they had been transported for a long time, throwing a rope to a tree, they decided to start sawing the next day.

Second day

As expected according to the instructions, at first the wedge was cut off from the side where the tree falling was planned. from the opposite side of the garden.

The first hitch was discovered here: the tree turned out to be an oak tree. Perhaps this was the reason for his death in the color of years: another oak grows nearby, only more, in the photo he is on the left. Maybe the older and big “killed” the opponent, they grew up too close?

In general, quite an adult, although a long.dead oak turned out to be very hard.

How to cut down a tree interfering with you on a neighbor area without a fine

It is clear that cutting a tree that is not necessary for you on the site without the permission of the neighbor himself, as a rule, is fraught with undesirable consequences. But what if this tree has long transferred its branches and roots through your common fence, but you do not need it?

Here it is worth contacting other regulatory acts. In particular, to the rules for the planning and development of the territories of horticultural (country) associations of citizens. And in them in black and white it is written that the minimum distance of tall trunks (more than 15 m in height) trees to the boundary of the neighboring site (that is, to the general fence) should be at least 4 m, medium.sized (from 10 to 15 m in height). at least 2 m.

Do not rush to quarrel with a neighbor: you may be able to agree with him in a good way, explaining all the legal subtleties. If the neighbor does not agree, you have the right to send a registered letter to his address with a demand to eliminate the violation of the established standards, and in the case of refusal or ignoring, apply to the court, and in the statement of claim to indicate, what exactly did not please you, and at the same time demand laying down payment of court costs for a neighbor. Of course, the court will make such a decision only if the victory in this case remains you.

The development and ambush of a summer cottage often affect the interests of neighbors. To avoid quarrels and protect your rights will help knowledge of laws.

But before organizing “perplexed” war, evaluate the situation and for your part. Well, what if you yourself landed a small tree or shrub next to a common fence, which, by law, should be no closer than 1 m from it?

Keep in mind that the appeal for resolving a tree saw does not always mean its obligatory receipt. And you should not quarrel with neighbors in vain. Therefore, to begin with, it is necessary to decide whether the reason why you got into a paperwork and are ready to let your own or someone else’s tree under a chainsaw or an ax are so important. Maybe it’s still worth leaving everything as it is, if an imposition does not cause fundamental harm?

tree, tilt

Sackle the tree branch

Now transfer the saw to the opposite side of the branch and place it so that there is a distance of a few centimeters between the lower cut and the future upper. Start cut a branch at a slight angle, gradually directing the tool to its center. So the branch will freely fall under the weight of its own weight, leaving the step “stump”, and at the same time will not damage the bark.

Remove the “stump” from the sawn branch

Cut the stepped part, retreating from the tree trunk only 1 cm. To do this, make an incision first on the bottom of the branch, and then begin to saw it off from above, trying exactly, “trace in the next”, get into the lower section. If you leave a large “stump”, the bark will dry out on it, and if the wound does not drag out, the rest of the branch will dry out and the rest of the branch.

The spaces of large branches should not look like recesses or, on the contrary, protrude more than 1 cm from the barrel. After cutting, treat the place of the cut with a garden variety: it will protect the tree from diseases, and also help it recover quickly.

If you did everything right, then the place will heal very quickly, and the tree will not even feel that it has lost one of its branches.

Remove thick branches correctly, then the tree will not only safely survive the pruning, but also get significant benefits. it will rejuvenate and begin to actively bear fruit. And what can please the gardener more than fruiting trees?

Prepare the inventory

Naturally, first of all, you will need an ax and saw. If you have a chainsaw, it is advisable to close your eyes with goggles. Be sure to put on gloves in your hands, cover your head with a thick hat or cap (even better. a helmet, if the tree is large).

It is not recommended to bring down trees in open shoes and clothes. It is advisable to wear sneakers, pants and a funnel with long sleeves. These measures will protect you from strong bruises and abrasions if the tree hurts you when falling.

Tie the barrel with ropes

To be safe, tie the upper part of the trunk with reliable ropes. During the procedure, assistants must pull them, holding a tree.

Even if you cut a small tree, it is advisable to insure with a rope

According to safety requirements, the length of the ropes should at least double the height of the tree.

Personal experience: how I chopped a giant tree on the site

Permanent author Houzz. Journalist-commander, “engine”, experimenter and practitioner. I love my cottage: invent, design, build, craft, deal with engineering systems. From time to time, the “country” hobby becomes source of income: I cooperate with the specialized media, I advise those who want to choose a house, a plot, help representatives of construction companies promote their projects and establish communications through social networks

Own piece of forest on the site is not only a subject of pride, but also source of problems and the cause of disagreements with neighbors. I’ll tell you about my experience of owning a forest plot in the Leningrad region.

На

Совсем недавно — всего-то пятнадцать лет назад, расчищая просторный лесной участок под строительство, я решил оставить лесные деревья, среди которых были березы, сосны и ели.

Но радость от «своего леса», в который можно выйти прямо из дома, была недолгой: за несколько лет, лишившись конкуренции, помилованные мной деревца вокруг дома окрепли и выросли до исполинских размеров. Идею фруктового сада и грядок с клубникой из-за затенения пришлось отложить до неопределенных времен — свой лес и огород вещи малосовместимые.

А потом деревья начали падать. Сначала одна береза под порывом шквального ветра. Затем — еще одна, обнажив при этом гнилую сердцевину…По счастливой случайности дачное имущество не пострадало. И прошлой весной было принято решение избавиться от берез, оставив на участке только несколько сосен.

Завалить дерево на уже застроенном участке, да так, чтобы не на дом, баню, забор, провода или другое дерево — та еще задача.

Представители компаний, специализирующихся на валке деревьев, запрашивали за работу несколько десятков тысяч и утверждали, что нужен порубочный билет, оформление которого они готовы взять на себя (разумеется, за дополнительную плату).

DANGEROUS TREES! Severe Lean, How to fell a tree with hard lean

В результате трое опытных лесорубов, вооруженных веревками, шестами, лестницей и бензопилой, справилась с работой за сумму на порядок меньшую. Потом мне пришлось целое лето заниматься заготовкой дров. Теперь у меня на участке солнечно, ягоды вызревают, а дрова осенью покупать не пришлось. Надо сказать, что решение избавиться от леса было оценено соседями неоднозначно: с восторгом — ближайшими, с осуждением и угрозами привлечь экологов — дальними.

Лес — это экосистема, мы в ней чужие Как мне рассказывали дендрологи, сохранение леса на участке — та еще задача. Лес — это экосистема, где вековые сосны сплелись с березами, а деревья могут жить столетия. Мы с вами, своими дачами и коттеджами в этой экосистеме — чужаки. Прореживая лес, проводя дренажные работы, сооружая монолитные фундаменты и повреждая корни и бездумно засыпая корневые шейки, мы можем добиваться не вполне предсказуемых эффектов.

Те же березы в природе живут по 100-150 лет. Только на облагороженном дачном участке, вырвавшись из болота и избавившись от конкурентов, небольшие деревца могут вырастать очень быстро. Но так же быстро они начинают болеть, дряхлеть и падать. Более чем вероятные последствия — поврежденные провода и постройки. Поэтому дам банальный совет: хотите уголок леса на участке — не пускайте дело на самотек, а консультируйтесь со специалистами-дендрологами. Здесь слишком много нюансов, которые важно знать. … Хороший вопрос: Как спасти деревья на участке во время стройки дома

Взвесьте «за» и «против» Может прозвучать ужасно, но минусов у леса на участке больше чем плюсов, да и плюсы — с оговорками.

Деревья — это естественная шумозащита и фильтр от пыли. Однако низкорослые кустарники и газоны справляются с этими задачами гораздо лучше высоких деревьев. Сосны и ели насыщают воздух ароматом хвои и фитонцидами и эфирными маслами, и это благоприятная среда для тех, кто страдает легочными и простудными заболеваниями. На самом деле, эта среда подходит не всем: есть люди, для которых сосновый лес — это аллергия и головные боли (поэтому, выбирая участок, в первую очередь слушайте себя). Взрослые лиственные деревья — естественный испаритель избыточной влаги (проверено лично: после вырубки деревьев под ногами начала хлюпать болотная вода, пришлось делать дренажные работы)

Однако приходится быть готовым: – …К тому, что деревья иногда падают, снося провода и повреждая постройки – …К избыточному затенению, обилию комаров и гнуса – …К необходимости чистить забитые листвой и хвоей водостоки и дренаж – … К аллергиям. Березовая пыльца, цветущая осина и сосны-”мальчики” — неблагоприятная среда для аллергиков – Мощная корневая система хвойных деревьев расползается по участку, поднимая дорожки и разрушая фундаменты построек – Взрослые деревья притягивают молнии – В тени берез не будут расти ваши (и соседские) яблони – К разногласиям с соседями по поводу того, что крона вашей вековой ели перекрывает им весь солнечный свет.

Как заставить соседа спилить дерево, которое мешает? Первый и самый главный совет: постарайтесь по возможности обойтись без конфликтов. Потому что конфликты с соседями — последнее дело, а формулировка « Ваши деревья мне мешают » — это уже заявка на конфликт.

Я бы посоветовал предложить помощь. Ведь сосед не просто так не готов к активным действиям. Самые распространенные варианты — нехватка ресурсов (рады бы заняться, но некому и руки не доходят), страхи (нужно получать порубочный билет, или при валке дерево « пойдет не туда » ), и довольно редко — « просто все до фонаря ».

Ресурсы: некому, некогда, руки не доходят Да, так чаще всего и бывает. Соседи — пенсионеры, родные в городе, а силы уже не те. Предложите им свою помощь в приведении в порядок сопредельной территории — в конце концов, их деревья это и ваши проблемы. Ни в коем случае не пытайтесь валить вековые деревья на застроенных участках своими силами — вызывайте специалистов и участвуйте финансово.

Страхи: вдруг что-то пойдет не так? Вы и ваши соседи в этом не одиноки. Когда я принимал решение о вырубке, меня тоже очень сильно напрягала здоровенная береза, угрожающе накренившаяся к окнам гостиной. Ребята, которые пришли пилить деревья, объяснили, что даже в этом случае у дерева не смещен центр тяжести (в противном случае само бы уже упало), отпилили несколько тяжелых веток, смотрящих на дом… И аккуратно положили березу в направлении противоположном угрожающему наклону. У профессиональных вальщиков (арбористов) есть целый арсенал приемов, позволяющих аккуратно приземлить дерево — от контролируемого падения в заданном направлении до спиливания по частям.

Подготовительные работы

Первое, чем стоит заняться перед валкой – расчистить место для падения дерева. Опасной считается территория, равная двойной высоте ствола. Если вырубка выполняется летом, необходимо выкосить траву и срезать кустарник в радиусе 0,7 м вокруг. Если зимой – следует вычистить или утрамбовать снег.

Кроме этого, надлежит выполнить очистку ствола от ветвей и сучьев до высоты плеча работающего.

Следует убедиться в отсутствии линий электропередач, зданий и построек на участке. Если в рабочей зоне проходит дорога, требуется оградить ее специальной лентой и табличками, запрещающими движение прохожих и автомобилей.

В подготовке нуждается и рабочий инструмент, особенно это важно, если работы будут выполняться бензопилой. Оборудование нужно собрать, проверить его целостность, натяжение цепи и ее заточку. Тупые, погнутые зазубрины усложнят процесс или сделают его невозможным. Далее выполняется заправка, проверяется уровень бензина и масла.

Технология ручной работы

Выбор инструмента для удаления насаждений зависит от габаритов растения. Если требуется убрать небольшое деревцо или кустарник, то безопаснее пользоваться топором или двуручной пилой.

Если ствол имеет серьезные размеры без моторизованной пилы не обойтись.

  • При помощи топора выполняется косой направляющий подруб с той стороны, куда предполагается падение дерева. Он необходим для задания нужной траектории и обеспечения безопасности работников. Его глубина должна быть не меньше четверти ствола.
  • При помощи пилы делается горизонтальный пропил с той же стороны до соединения с подрубом и образования клина.
  • Валочный пропил производится на противоположной стороне. Его стоит располагать параллельно первому пропилу и выше него на 5 – 10 см. Полностью перепиливать дерево запрещается! Это может сделать траекторию падения непредсказуемой. Следует оставить не меньше 10 см целой сердцевины ствола, которая позволит контролировать угол слома.
  • Валку лучше выполнять группой работников из двух – трех человек при помощи веревок. Если таким способом повалить ствол не получается, допускается подтолкнуть его руками. Можно прибегнуть к методу рычага, используя длинную палку, позволяющую толкнуть дерево на высоте трех – четырех метров над уровнем валочного пропила.

Процесс сушки заготовок

После проведения процедур по роспуску деревянных спилов, нужно внимательно изучить методы сушки. Процесс крайне необходимый, именно он отвечает за качество и срок эксплуатации будущего слэба.

Сушка происходит естественным методом в специальных боксах для просушки. Дерево можно просушить самостоятельно, без использования специальных камер.

  • Выбрать место, куда не попадают солнечные лучи. Сухой воздух в помещении ускорит процесс.
  • Соорудить навес так, чтобы в нем были воздушные просветы.

Процесс сушки заготовок происходит в течение года примерно на 2-2,5 см. Деревянный спил, толщиной 5 см, будет сушиться около 2-х лет.

Самостоятельное изготовление стола

После приобретения слэба его нужно подготовить к работе. При отсутствии специального оборудования, можно использовать ручной фрезер, вмонтированный в подвижную платформу. После обработки фрезером, мелкие неровности можно убрать при помощи шлифовальной машинки.

Крайне важно удалить кору и мелкие дефекты на заготовке. Дальнейшая работа зависит от того, какую столешницу планируется создать в конечном итоге.

Слэб можно распилить вдоль, чтобы получить две части будущей столешницы. Получившиеся половинки необходимо положить на ровную поверхность. Заготовки нужно базировать, снизу герметизировать пространство гладкой доской.

  • Далее необходимо выбрать подходящий цвет эпоксидной смолы. Она не имеет цвета, но ей легко предать оттенок путем добавления колера.
  • Смолу нужно залить во все полости на заготовках. Желательно нагреть ее перед использованием.
  • Заполненные полости дополнительно можно оформить, наполнив их камушками, ветками или даже насекомыми.
  • Но, необходимо учитывать, что предметы будут всплывать вверх, поэтому их необходимо притапливать.
  • В раствор нужно добавить затвердитель. Когда смола затвердеет, нужно покрыть доски слоем смолы или лаком.

Параметры стола

В первую очередь устанавливается форма изделия. Она повлияет как на особенности отыскиваемого спила, так и на проведение собственно работы.

  • В виде круга, который потребует дополнительного пространства вокруг. Смотрится такой вариант достойно. Спил должен быть большого диаметра. Можно воспользоваться множеством спилов по торцам, параметры которых значительно скромнее;
  • В виде овала. Вариант идеальный для многочисленного семейства. Сидеть за подобной столешницей весьма удобно;
  • Прямоугольная столешница позволит поставить стол к стене, освободив дополнительное пространство. Спилы потребуются продольные, а не торцевые. Есть возможность выполнить подобное изделие из небольших спилов, когда их имеется достаточное количество.