How to cut a skirting board with marking on the ceiling
Before you can cut the outer corner of the skirting board without a miter box, you need to decide which method is most suitable. The easiest option is to apply pencil markings to the ceiling..
How to Use a Mitre Box
In the absence of special tools, you can use a simple set of things: a pencil, a stationery knife, fillets and glue for decorative details. You will also need a ruler.
After applying the baguette to the ceiling, a corner mark is made. In the place where the joint of two fillets will be formed, put a cross or a large dot. Then, on the floor or on a table on the baseboards, a cutting line is drawn. If the fillet is made of PVC, it can be easily processed with a stationery knife. Those who have never performed repair work may need the help of a master if the room has uneven, convex corners. It is recommended to take a control measurement before gluing..
Miter box for skirting boards: basic rules of use
Everyone will be able to understand how to properly cut the corners of the ceiling plinth. In order for the process to go smoothly, you should familiarize yourself in advance with the main methods of creating beautiful and even blanks..
To work you will need:
- assembly knife;
- drawing accessories;
- sandpaper for corners.
The main rule of work is observance of the slope of the corners. If the skirting board is fixed on the right, then the corner will be cut from the left side, and vice versa.
How to fit skirting boards part 1: measuring & cutting
The miter box is a convenient tool for fast processing of workpieces
Polyurethane ceiling plinth: what it is, advantages and disadvantages, what it consists of, what types are there, how to choose, step-by-step installation of a baguette, painting, restoration methods, average cost – in our publication.
How to make a miter box with your own hands
The miter box is a useful tool with which you can correctly and evenly cut the corner at the baseboards along the oblique mowing line. Despite the fact that the miter box seems to be a simple device, in order to make it with your own hands, you need to understand what this design is for and how to use it..
Nuances to consider:
- A plastic miter box will not last long, it grinds off quickly and the cuts become inaccurate;
- if you plan to install large, wide skirting boards, the filling strip should also be wide;
- the sidewalls must be securely fastened so that they do not crumble.
Before cutting the plinth, you should either purchase a ready-made miter box or make it yourself. To do this, you can use a simple sheet of paper, or blocks of wood..
If a saw is available, you can make a miter box from a single piece of wood by sawing out the middle and side cuts on the block.
To make a miter box, you will need: a board for the base, 4 boards for the walls and sides, hacksaws, a drill, drills, a file and confirmations. First, something like a box is assembled from the boards, in which holes are then cut out. The length of the sidewalls is 6-8 cm.To create them, a hacksaw or circular saw is used.
The cuts are made at right angles. You need to cut them carefully. mowing line must run in the same direction.
How to cut a ceiling plinth correctly
Novice craftsmen are worried about the question: how to cut the ceiling plinth in the corners, the video clearly demonstrates all stages of the process.
To avoid irreparable errors, you need to act clearly according to the instructions. The easiest way to learn how to properly cut the ceiling plinth in the corners is to try on the details and see the result..
How to cut a ceiling plinth
Starting a renovation, not everyone knows what a miter box is. You can glue fillets on the wall without this tool, but it greatly simplifies the process. With the help of a miter box, corners are cut out on long panels for the ceiling. The device has oblique grooves, into which a hacksaw is placed for cutting. The miter box for skirting boards is a versatile tool. It can also be used for other types of finishing work..
To ensure that the skirting board fits snugly, it is placed vertically, in a raised state and supported when cutting
There are tricks that will help you cut the workpiece correctly. To avoid the formation of gaps between the skirting boards, they are first applied to the ceiling and measured. For beginners who have never used construction tools before, it is recommended to leave an extra 5-7 mm, which can be easily removed with emery..
If the joint is ugly, you can hide it under special decorative corners..
How to cut the inner corner of a ceiling plinth
After adding decorative elements, the wall in the apartment looks stylish and expensive. In order not to disturb the harmony of the interior, you need to figure out how to cut the skirting boards to the ceiling so that no crooked joints form between them. The work of the finisher is painstaking and requires care.
In city apartments, internal corners are most often found; they can be decorated using a miter box. The corner on the skirting board is cut from the front. It is recommended to use a new hacksaw for a precise and even cut. It is also important to choose the right material. Skirting that is too soft will bend or crumble.
Before you cut the plinth on the ceiling in the corners, the fillets are applied for fitting and the cut line is marked. The glue is applied only after successful joining of two blanks.
The process is simple: the walls are aligned first. On both skirting boards, an angle of 45 degrees is cut off, after which the parts are glued using a special glue. Things are more complicated with curved walls. To make the skirting boards look beautiful, they need to be tried on after each cut and, if necessary, sharpened.
Layout of skirting boards using factory corners
It is sometimes possible to hide the defects that arose when attaching the corners, if you choose the right corner. If you suddenly had to cut off the excess part of the material and the corner of the plinth does not look beautiful, the gap is filled with glue, and a decorative corner that matches the color is superimposed on top of it.
It doesn’t matter what kind of skirting board was used – polypropene or plastic. With the help of decorative details, you can greatly change the appearance of the ceiling. Cutting the corners yourself is not recommended, it is better to purchase ready-made.
How to cut a corner of a skirting board using a homemade miter box
For those who do not know how to cut a corner on a ceiling plinth, the video clearly demonstrates all the steps.
How to make the corners of a ceiling plinth without fixtures
- Mark the skirting boards as required.
- Using a ruler, connect the edge of the skirting board to the mark. If you just cut along the mowing line, the parts in the corner will still not fold, as the inner part will interfere. You can trim it later by taking measurements on the ceiling..
- You can lay the piece to be cut on the table, with the part that will be located on the ceiling, and cut at an angle of 45 degrees. Adjustment required, but less.
- Repeat steps 2 and 3 for the second plank, making the outer corner.
Thus, you can make a ceiling plinth without special tools, using available tools.
How to join skirting boards in the corners
When a certain part of the plinth is glued and a small distance remains to the corner, so as not to be mistaken with the length, it is necessary to leave a margin. To begin with, you can cut off a piece that will be 10-15 cm longer. Then cut the corner in a convenient way, try it on a dry surface, attach the plank to the ceiling and highlight the place to which it needs to be shortened. Undercutting is performed at an angle of 90 °.
Next, you need to correctly join the corners. The made ceiling moldings are attached at an angle of 38-45 °, so the classic 45 ° is not always suitable at the joints. In various cases, the cut edges do not join and leave gaps. For this reason, after the initial trimming of the corners, it is necessary to carry out a “dry” and the most accurate joining of the baguettes directly to the ceiling. Especially have to tinker with wood and plastic materials..
Having completed the rough joining of the skirting boards, glue or screw the fillets to the walls and ceiling, then, if necessary, use a putty and seal the seams at the end.
How to make an even corner: ways
The most difficult thing is to cut the corner so as to get a perfectly even one: the surface of the materials used is not easy to cut, in addition, you need to observe good joining, preferably without huge gaps. How to make a corner on a skirting board? You can use several methods: with a miter box, without a miter box, using decorative corners, as well as an alternative way.
You can not make fillets yourself, but immediately purchase those that were initially prepared for docking. This is how they produce expanded polystyrene fillets, which do not need to be adjusted to each other..
The baguette that will be fixed to the left must have a right cut, and the right baguette must have a left cut. When creating the inner corner, make the bottom section rise above the top, for the outer corner everything should be the other way around.
Attach the baguettes to each other, if necessary, make undercuts at the joints of the base. If everything is in order, the skirting boards can be fixed with glue or screwed to the walls with further sealing of the seams..
How to make a corner of the ceiling by knitting with a chair and improvised means
Requires a square sheet. Precise diagonal crease. The learning circuit for cutting pipes should be wrapped around the product so that the long side runs parallel to its section.
On the small sides, it forms like 45 degrees.
The cut line with a pencil or marker remains on the sheet of paper.
It is recommended that the labeling site be marked with a narrow stripe so you cannot remove it accidentally.
This method is great for long large pipes with a cut in the center of the product..
Marking the corner with a sheet of paper
Placement paper is one of the easiest ways to accomplish a task..
We cut the corners of the ceiling plinth without a miter box
How to properly cut a ceiling plinth without a miter box? To work, you need a well-sharpened pencil, a small piece of plinth, a stationery knife (for polystyrene or polyurethane) or a metal saw (for other materials), a ruler.
You need to attach the plinth to the corner and draw the line with a pencil along the outer edge, then attach to the other side of the corner and also mark. As a result, a cross will turn out on the ceiling, the center of which will mark the place where the plinths of the ceiling plinth should converge. Place a piece of skirting board where you will glue it. Resting the end against the wall, transfer the desired mark to it. This way you can cut the corners of the skirting board without a miter box..
How to cut ceiling skirting boards in the corners? The secret of a high-quality incision is in making cuts both on the outside and on the inside. The inner cut matters if we make the outer corner.
Usually they use professional equipment – miter saws or industrial electric rotary hammers. But supporters of home renovation can get by with conventional tools. The main requirement is that at the end of the work, the result should be a clearly visible texture for the cornice, reflected on its front or back side.
Corner Slicing Technology
So, at what angle to cut the ceiling plinth and where does the formation of an angle begin with the help of home remedies?
First you need to measure the angle that is between the walls – for this you can take pieces of foam from the technique. Usually the angle is 90 degrees – a strict perpendicular. In this case, trim the edges of the product at an angle of 45 degrees..
In the event of irregularities and mismatched joints in the gap between the ceiling and walls, you need to divide the corner radius in half. At the same time, do not confuse the details. The baguette for the left side is notched on the right, and the one on the right is the other way around.
Before cutting the ceiling plinths in the corners, form a corner inside the material in the upper space – this decision is based on the fact that the lower side protrudes above the upper one. When performing an outer corner, the procedure is reversed. The texture of expanded polystyrene materials helps to smoothly and accurately adjust the details. If wooden or plastic elements are used for the baguette, then you will have to work with them more carefully..
Cutting without tools
How to cut a corner of a skirting board without a miter box? It is possible to perform calculation and cut manually.
By attaching the product to the place where it will be mounted, you can immediately take into account all the errors on the walls.
How to cut ceiling plinths in corners with and without a miter box?
The procedure for installing fillets on ceilings seems to be quite easy, but it requires specific techniques to successfully complete the repair. Often we cut the corners of the ceiling plinth completely incorrectly, which leads to a reduction in its service life and poor quality of repair work. Correct joining, evenly fixed edges is a completely achievable result, if you use the recommendations of experienced specialists.
Cutting method with miter box
The most popular mounting option is using household tools. The miter box is a renowned carpenter’s assistant to help you cut at the right angle. Usually it is a tray, wood or plastic, with vertical slots for the blade at angles of 45 and 90 degrees. How to cut the corners of a ceiling plinth with a miter box?
First, you should attach the material to the ceiling, install its bar in the miter box.
Holding the working material with the right hand, choose the position of the hacksaw at 45 degrees and cut.
Installation of finishes: features
Many owners of houses and apartments, in the midst of renovation work, are often puzzled by the question of how to properly cut the ceiling plinth in the corners. The problem is that it is not technically possible to make an incision at a 45 degree angle. To perform such manipulations, it is important to correctly dock at the boundaries of the outer and inner corners of the web, which is quite problematic..
Specificity of the ceiling option. not only in the vertical position of the web.
For the most accurate cutting, a special corner element is used, which is inserted into the edge of the skirting board – it will help to hide cutting errors. This element will emphasize the corners in the room; the choice of such a detail must be approached responsibly.
Varieties of finishing products
This material is intended for decorative finishing of the ceiling area, visually separating it from the walls and covering the joints of various finishing elements. Almost any option for decoration, interior design involves the use of such details. Otherwise, the room will look unfinished..
Fillets are used to secure this part, which are attached to the ceiling with glue..
The choice of mounting option depends on the type of product:
- PVC – the cheapest, but also the most brittle, prone to defects, but easy to use, it can be cut with a knife.
- Expanded polystyrene is also inexpensive, brittle, requiring a hacksaw for metal, although it is easily cut. Another option is slightly more expensive – from extruded polystyrene foam, it is more difficult to cut it, but it crumbles less.
- Polyurethane is the most expensive and moisture resistant, durable and elastic. It is more difficult to work with it, it deforms at high temperatures.
- Wooden – dense and heavy material, cut only with a hacksaw.
Recommendations of the masters
Experienced carpenters, joiners and builders know best how to cut ceiling plinths in corners. Most advise you to make cuts on the side and try on the strips to the ceiling, if necessary – cut in the direction of the part adjoining the surface.
Having made a rough docking, they screw the finished fillets to the wall. The seams are sealed – the installation of the skirting board is complete.
How to cut a ceiling plinth with a miter box
Any ordinary person can cope with this task. You don’t have to have construction skills. All that is required is a cutting tool, a miter box and the ceiling plinth itself. Care must be taken when handling the product. Otherwise, you can dull the tool and leave the cuts where they are not needed..
How to properly cut a corner with a miter box, instructions:
- Fix the skirting board in the miter box as it will be placed on the wall. The side that you will press against the ceiling during installation on the miter box must be attached to the sidewall.
- Insert a hacksaw, clerical or ordinary knife into the prepared gap (at 45 °), it all depends on the fillet, and carefully begin to cut the ceiling plinth.
- Process the joint and check the correct cutting by placing the product in its place. If the foam product is 2 mm uneven, it can be corrected with a knife. Sand wood skirting boards.
Do the same with the other baguette. Just remember, the corner of the ceiling plinth must be opposite to the first one, so that when joining, a right angle is formed..
The angles can also be different. For example, a simple wall has an inner corner that abuts inward. The technology for trimming the plinth for such an angle is described above. And here is a visual photo.
And if the design of the room offers a clone or an unfinished partition, then the corners on them are external, directed into the room. Here everything is done the same way, only here the cut on each product is opposite. Compare these photos to see the difference..
A good example of an external and internal corner in a room can be seen in this photo. Here, a ceiling plinth is already glued to the ceiling, which was cut off by the above methods..
Slicing Pro Tips
Before you get started, we recommend that you familiarize yourself with these rules, which will not only simplify the task, but also help you do everything quickly, efficiently and without frustration. So, these are the rules:
- Before starting to cut the baguette for the first time, you can practice on a different plank that is unnecessary. So will you fill your hand.
- For correct measurements, you need to measure the length of the inner corner of the plank on the side that is inside, and the length of the outer corner, starting from the corner point inside to the width of the room.
- When installing the product under stretch ceilings, it is fixed only from the side of the wall. Your task is to prevent glue from getting on the vinyl canvas, otherwise it will deteriorate.
- It is necessary to finally fix the plinth only when the plank is fully fitted.
- With perfectly flat corners, you can adjust baguettes on the floor.
- When assembling products, not everyone succeeds in doing it perfectly the first time. Need a fit. Be patient and don’t give up!
- If we talk about EPS products, then it is not necessary to fit them back to back. After all, the structure of the material is soft. Wood or plastic is another matter. This is where the docking should be of high quality..
As you can see, the rules are pretty simple and easy to follow. But the end result will only delight you..
Choosing the Right Slicing Tool
The primary task is to prepare all the tools and materials. When it comes to slicing, it is clear that the main tool for this job is to do the slicing work. It is chosen depending on what material the ceiling plinth is made of..
- If it is polystyrene, then it can be cut with a clerical knife. This material is characterized by low strength and low price. Despite this, it is considered one of the most popular types of skirting boards. The strength of the material, in fact, is not particularly needed, since no physical and mechanical stress affects it.
- EPPS (extruded polystyrene foam). Also does not have a low cost. Although at the same time it is several times stronger than foam. With this in mind, a thin and sharp knife will serve as a cutting material for it..
- In the case of wooden skirting boards, things are more complicated. A knife is indispensable here, because the material is durable and more difficult to process. But the products have more advantages, including environmental friendliness, noble appearance and durability. At the same time, the price for the product is higher. You need a sharp hacksaw to cut it..
How to cut ceiling plinth in corners
At first glance, the installation of a skirting board may seem easy to you. If you do not take into account some points, then this is true. But what points are we talking about? It concerns cutting fillets or skirting boards. After all, the room has its own corners. And if you don’t have problems on straight sections, then angles and other shapes can bring a headache. At the corners, materials need to be joined to obtain a perfect 90 ° angle.
Therefore, many people ask the question: how to cut off the ceiling plinth? This article will help you solve this problem. You will learn several ways to cut the skirting board, the materials used and how it works. So you can easily stick a ceiling molding at home..
We cut the ceiling plinth according to the template
If you do not have a miter box and you decide not to buy it, then you can get by with improvised means using a template. Only the method is appropriate when the corners of the room are perfectly even, and the plinth needs to be cut at 45 °.
You need to make a sketch on paper that will simulate the same miter box. The paper should be heavy. Draw two straight and parallel mowing lines on it. Then draw the desired angle using a protractor. Another option is to draw a large square and connect its diagonals. The square should be perfectly flat. This is shown in the photo.
Now the case will resemble cutting a baguette with a miter box, only without gaps. You need to lay down the product in the same way, making sure that the edges are on the same mowing line. And when cutting, it is important to hold a knife or hacksaw strictly vertically..
Cutting the ceiling plinth by marking
Another alternative to the miter box. The job is to create markings on the wall. The whole process boils down to the following steps:
- first you need to attach the plinth to its place in the corner;
- mark the fishing line on the ceiling starting from the rib to determine the level of fastening;
- then you need to attach the product in the same way to the opposite wall and make an identical straight line. You will have two straight mowing lines that intersect at a certain point;
- now again attach each of the products in turn and mark this point on them;
- repeat the procedure again to mark the point at the bottom;
- use a ruler to connect these points. The angle can vary from 38 ° to 45 °, as the wall and angle are not always even. This measurement will be much more accurate;
- it remains to cut the skirting board along the marked mowing line.
Now you are armed with as many as 3 different ways to cut the ceiling plinth in the corners. Choose one of them to cope with the task. A visual video will help you in your work.
Now you know how to properly adjust and cut your ceiling plinth. This is the most difficult stage of installation. Therefore, if you complete it, then further work will be very simple. It is enough to apply the adhesive to the surface and fix the product. Beautiful baguettes can not only hide wallpaper joints or poor-quality staining of corners, they will make your room original and beautiful. And due to the fact that the profiles have a varied appearance, color, structure and shape, it will be possible to diversify the design with success..