How to cut a tree with a saw

Sawing branches and a trunk with a chainsaw

The branches must be detached from the bottom of the tree, which is already on a flat surface. You should alternately finish the rows of branches, getting to the central ones, in order to gradually completely clear the trunk. All elements must be removed separately, it is advisable to transfer the sawn-off parts into a certain container during the work process.

What you need to know first?

There are a range of factors that affect the correct felling. The most important conditions are divided into two categories: the technical component of the process and ensuring the safety of all persons involved.

The technical side of the issue usually requires an immediate solution even when choosing a chainsaw, since each model is designed only for a certain thickness, density and structure of the wood mass. Sawing is usually quite slow. Acceleration is possible only when working with a well-leaning tree or thin trunks (you can even use a mini chainsaw for this). Usually, such plants are not of great value, therefore they are very rarely cut down.

It is necessary to take into account the thickness of the tree in advance, comparing it with the selected model of chainsaw (see the rating of the best chainsaws). The device should be optimally suited to a specific power goal. If the length of the tire of the device does not exceed 35 cm, then the maximum diameter of the tree trunk with which the work is carried out is 30 cm.When the length of the tire reaches 65 cm, then it is possible to cut down options up to 60 cm in diameter.

For the most massive wood species, complex and very powerful chainsaws are used (see the most reliable chainsaws), which exceed the standard weight. The length of the bus in them is above 65 cm.

The sawing technology also changes with the thickness of the target. With one cut, trees up to 20 cm in diameter can be reliably cut down. If this figure exceeds this threshold, you need to make several cuts so that, without damage to the device and strong efforts on the part of the workers, to cut the tree.

Chainsaws of Russian production in many respects are not worse than foreign ones.

Chainsaw Lesnik meets all international quality and safety standards.

The Ural chainsaw is very easy to use and therefore popular among consumers.

The higher the height of the tree, the more problematic it becomes to comply with safety precautions. Sawing is also more difficult, since more weight requires some effort and high power of the device. Sometimes you have to make cuts in a group, keeping a distance in level, that is, making them at different heights.

In advance, you need to measure the center of gravity to determine the fall of the tree. This indicator is influenced by the shape of the crown, as well as the features of the trunk itself. These criteria have an impact not only on the position of the workers, but also on the anticipated cuts, which are optimal. Usually the trunk needs to be cut completely and at the root, but sometimes a certain part of it is required, which also affects the cutting process.

Step-by-step instructions on how to cut trees

The technology for cutting down trees of large and small diameter has several differences. First you need to learn how to cut down small plants:

    We are looking for the slope of the tree. Even slightly gravity is suitable, however, the stronger this feature is expressed, the brighter you can notice the exact side of the fall of the plant.

It is advisable to cut straight trees in convenient places for dumping, and not at random. One cut is approximately half the full size of the trunk.

A tree is considered large if it is more than half a meter in diameter. At first, the trunk is used as a support, however, the sawing of the structure can be carried out only after choosing at what angle the plant will fall. Algorithm of actions:

  • A cut is made from top to bottom with a slope of 60 degrees. It must be done exactly from the side of the intended slope. It is necessary to constantly observe the exact angle and keep the chainsaw absolutely level.
  • At the bottom, a fishing line is drawn horizontally, which should adjoin the innermost point of the first cut. When it is carried out all the way, you can remove the corner consisting of wood, which allows you to make a side cut.
  • On the opposite side of the first two cuts, a horizontal cut is made, which starts slightly above the lower level of the cuts on the opposite side. It is necessary to cut quite deeply, however, it is forbidden to perform the operation completely, that is, the tree must remain in an upright position.
  • In the second cut, you need to mount a pre-prepared wedge or a special blade for felling wood. The remaining volume can be removed using a spatula or by finishing from the inside.

There is an alternative way to safely fell trees. First, the solid wood is completely sawn through.

Then the device moves in the opposite direction with a slope to the left and reaches the middle. A wedge must be inserted under the second cut. The tree is finished from the opposite side.

How to cut a trunk, which side. a diagram

To cut the trunk, take the following steps:

  • From above, the trunk is cut in about half.
  • The saw turns off (see why the chainsaw stalls), but is left in the tree. At this time, a wedge is hammered into the hole obtained at the first stage, which must be tamped with a high-quality hatchet. This is necessary so that the saw is not distorted by the weight of the two trunks, but is between them in a free position.
  • The barrel is being finished to the end point.

Sometimes the tire of the chainsaw remains in the trunk, especially for not just massive, but also hard woods. In this case, pulling it out is pointless. It is necessary to quickly turn off the motor, and then influence on both sides of the barrel from the cut from below, trying to simultaneously pull out the device. This action will require the help of a partner.

Take a closer look at

Cutting safety

When performing the procedure for felling trees, it is necessary to ensure full safety measures for both individuals and employees of organizations. Do not fell trees yourself. A partner is required. You should not make an open fire while working, and if there is one, you need to extinguish it before turning on the chainsaw. You also can’t smoke. Care should be taken in advance to protect the face from sawdust, as they always fly off when cutting wood.

Before sawing a tree, you need to make sure that if it falls, it does not touch people, living beings, does not damage the cables or wires through which the current flows. Do not work in strong winds. It is advisable to calculate in advance the direction of the fall of the trunk up to the exact contour on which all the rods and other elements are cleared so as not to damage the tree, and also not to cause its inertial overturn.

When working with full, thick posts, the chainsaw is held with both hands, while the tension is constantly felt.

You should not carry out work when using only the extreme part of the saw, as this will lead to strong kickback and automatic shutdown of the device, which can ruin the whole work by making inaccurate movements.

When sawing thick posts or massive branches, it is advisable to raise the chainsaw to a level above the shoulders.

How to cut a tree correctly. basic rules and technology

The main aspects necessary to comply with when cutting trees:

To get rid of the continuous sound of the chainsaw, you must use soundproof headphones, otherwise headaches are possible with prolonged and regular work.

First, all the technological features are determined, only then it is necessary to clearly plan the stages of work, which will help to guarantee to protect yourself from the impact of the weight of the falling tree. Even with extensive work experience, it is necessary to constantly take care of your own safety, since the highest number of injuries are received by workers who have long been accustomed to a constantly tense and dangerous environment in this field.

Felling a forest: how to cut down a tree so that it falls in the right direction, how to properly saw with a chainsaw in parts with your own hands

A chainsaw, with the proper power, is capable of cutting down any tree trunk for which the length of the cutting part is sufficient. It is necessary to carry out the work very carefully, adhering to all the rules. Particular attention should be paid when there is a risk of unpleasant situations due to too thick, icy or dirty wood mass. It is necessary to take into account all the factors that can complicate the work, and use the chainsaw carefully, constantly monitoring your actions and the work of your partners. In the article, we’ll talk about how to properly cut a tree with a chainsaw. a diagram and instructions.

To cut down a tree quickly, it is necessary to carry out preparatory work in advance, ensure safety precautions, and only then proceed to the event. It is enough to independently apply those positions provided by the scheme for sawing a tree so that the success of the event is guaranteed.

Safety technology is of great importance. To perform it correctly, you need to prepare in advance, as well as be attentive to the work throughout the entire time of interaction with wood.

Do not forget that absolutely every new tool, including Chinese chainsaws, needs to be run in, we also recommend reading the article about oil for lubricating chainsaws.

Chainsaw safety precautions

Yes, there are special rules:

  • Use appropriate footwear and clothing: non-slip footwear, goggles, gloves, heavy clothing. Earplugs help reduce noise.
  • Check if the chain is well sharpened and tensioned. The tension is good if the guide teeth stay in the groove as you pull the chain off the top of the bar. When filling with oil, it is advisable to always check that the chain is well tensioned.
  • Do not work in windy conditions.

How to cut a tree with a chainsaw without harming nearby objects? Try to plan the trajectory of the fall, having previously studied the territory and the tree itself that you are going to cut down. If it is dry, large dead branches, twigs may fall off, so they can be cut down beforehand, and here you need to be careful.

You must leave the work area without hindrance. If there are other trees nearby, try to work so that the sawn branches do not get stuck in their branches, this can lead to an accident, and then it is not easy to get them out. The cut tree you will need to then process and take out or remove from the site. Choose a direction for felling so that you can easily cut and remove the tree later.

Harvesting is an important step after felling a tree. Choose a place for the fall of the tree where it will be convenient to cut it into pieces, and then remove it from the site or load it onto a machine

Cafe Design

How to properly cut a tree with a chainsaw: safety rules when felling trees

Felling trees with an ax and an ordinary saw is a thing of the past; most owners of private houses and summer residents today acquire chainsaws. It is necessary to have a chainsaw. if there are no old trees for felling on the site, you periodically need to cut branches, and in case of force majeure, it often happens that a large tree falls or splits. here you really need to know how to properly cut a tree with a chainsaw.

A similar situation can develop both in the forest, where you will go on vacation, and in the country. If you notice that the tree is in disrepair and its fall threatens property damage, you should not pull with the felling

Many do not think about safety, but several important rules, in order to avoid dangerous situations, need to be learned.

The order of work when carrying out tree felling

Undercutting takes place in several stages. The first (upper) undercut is made at a quarter of the trunk diameter, at an angle of 45 °, you need to approach the tree from the side of the fall. Then an undercut is made from below. It is done horizontally to the level where both undercuts are connected. After making two notches, you should have a 45 ° angle cut into the trunk. Do not cut the tree completely, otherwise it will be impossible to guess in which direction its trunk will fall.

The felling cut is now in use. Before starting work, make sure that there are no people, pets or objects that can be damaged in the fall area. The felling cut is made on the side that is opposite to the intended direction of the fall of the trunk, it should be located at a distance of five centimeters from the bottom notch, parallel to it.

When felling cut, leave a hinge. 1/10 of the total diameter of the tree trunk. This is important as it provides the correct trajectory for its fall. If you do not make this cut, or make it less than the specified size, the trajectory of the tree falling will become unpredictable.

Slowly lower the saw into the trunk. To prevent the tire from getting stuck in the trunk, insert a wedge into the felling cut before the tree starts to fall. The wedge should be made of plastic or wood, the metal wedge can damage the chain. Engine speed during saw operation. maximum.

As you work, pay close attention to where the barrel is going. So you can take timely action if you feel that the fall has gone in the wrong direction.

Arrows indicate cuts: 1. upper, 2. lower, 3. felling. The unfinished part of the tree is a hinge to prevent falling in an unwanted direction

Two options for the notch: in the first case, a double right angle was cut, it is more difficult to make it, but the tree is guaranteed to fall in the direction you planned, in the second case, the most common option of the notch, described above, is performed

When the trunk begins to fall, quickly remove the saw from the cut, turn off the engine and leave the work area. Perform all actions quickly, delay can be dangerous.

Advice. It is more convenient to cut a tree in the direction of curvature, the greatest development of branches and branches, if the trunk is flattened. in the direction of a smaller diameter.

The video below demonstrates an example of work. fast felling of a tree, where a minimum of time is spent on performing the necessary undercuts:

That’s all, we looked at how to properly fell trees with a chainsaw. if you follow the above rules, you can easily knock down the tree you want. And the main thing here is to be attentive and focused. Before the first felling, you can practice on a small dry tree, if you have one on your site, or look for one in a nearby planting.

How to properly and quickly cut a tree with a chainsaw

Dry trees appeared at the dacha, and the farm has a chainsaw. The question immediately arises: how to properly cut a tree with a chainsaw.

Cutting a tree is easiest to carry out with a chainsaw, as it does not require a lot of physical effort.

The chainsaw is a great tool and can handle any trunk with ease. Yes, that’s just the tree has grown big and tall. In order to solve the problem of how to properly cut it down with a chainsaw and not suffer at the same time, you should consider some of the nuances of this rather dangerous event.

Features of felling wood

In order to understand how to properly cut wood with a chainsaw, you should consider the factors that affect the felling process. Two aspects of the problem should be noted here: the technical side and the security issue.

Tree felling scheme.

The technical side of the issue depends on a number of parameters. First of all, different tree species have different wood structures and different densities. The denser the wood, the slower the sawing process.

The main factor is the diameter (thickness) of the tree. Depending on this parameter, it is necessary to select the power of the chainsaw. Light saws (bar length up to 35 cm) are used to cut trees with a diameter of no more than 30 cm. Medium saws (bar length 35-65 cm) can be used when it is necessary to cut a specimen up to 60 cm in diameter. size, a heavy saw should be used (bar length over 65 cm). In addition, the sawing technology itself depends on the thickness of the trunk. Specimens up to 20 cm in diameter can be cut with one cut, while larger trees require two or more different cuts.

The height of the tree, in addition to safety issues, affects the cutting technology, as it determines the weight. It may be necessary to make several cuts at different heights from the ground. The type of crown and the shape of the trunk largely determine the direction of the fall due to the change in the center of gravity. All this affects the choice of the location and direction of the cuts. Finally, the cutting technology depends on whether you need to cut the trunk at the root or saw off part of it, that is, at what height the sawing is performed.

Felling safety

The fall of a tree when notched must be carefully calculated so that the performance of work does not lead to injuries.

The question of how to properly cut trees with a chainsaw cannot be solved without ensuring the safety of workers. First of all, it is strictly forbidden to cut down with a chainsaw alone. There should always be a partner. Due to the flammability of sawdust and gasoline in the tool, use of open flames and smoking is prohibited. The face and body must be protected from chips and sawdust.

Care must be taken to prevent the sawn tree from falling onto the worker, other people or the electric mowing line. Do not work in strong winds. The direction of fall of the trunk must be carefully calculated and cleared of obstacles (branches of other trees, etc.).

In order to cut, the chainsaw must be held with both hands. Do not work with the edge of the saw due to the risk of kickback from the tool. The risk of kickback of the tool must be taken into account during the entire sawing process. When sawing a tree or cutting branches, the chainsaw should be positioned no higher than shoulder level.

Felling small trees

Trees up to 20 cm in diameter are classified as small and can be felled with one cut. The technology for cutting such specimens is as follows. From the side of the inclination of the trunk, a transverse cut is made with a chainsaw. The length of the notch is about half the thickness of the trunk. Then the trunk is trimmed on the other side at the same level, until the tree moves. A little effort is applied and the tree falls in the right direction. Such cuts are carried out first at the level of a person’s shoulders. Then, with one cut, the remainder of the trunk is cut off at the root (soil) level.

Felling Trees with a Bow Saw

After cutting the trunk, you should immediately cut the branches on it. Their cutting begins from the distant branches. Small branches and twigs are removed with a single movement of the saw. Thicker branches are first cut from the top side and finally cut from the bottom. This should be done to prevent the saw chain from wedging.

Felling thick trunks

Saw direction when felling wood.

The question of how to properly cut a tree of large diameter is solved by several characteristic cuts. First, at a convenient height for work, the line of the tree cut is outlined. This virtual mowing line is then cut from above at a 45 ° angle. This cut is made from the side of the inclination of the trunk, that is, from the side of the fall of the tree after sawing. At the level of the intended mowing line, a horizontal cut is made (on the same side as the bevel cut) before connecting to the bend cut inside the trunk. The cutting depth should be a quarter of the trunk diameter at the cutting point. The distance between the horizontal cut and the beginning of the inclined cut along the surface of the trunk in the longitudinal direction is 20-40 cm. When cutting, one should strive to observe the recommended angles and cutting direction. After removing the cut piece of the trunk, the cut will look like a felling with an ax.

The next horizontal cut is made from the opposite side of the tree at a height 2-3 cm higher than the first horizontal cut. The cut is made so that its depth is about 10% less than the cut already made on the other side. At the end of the cut, there may be a crackling sound or slight movement of the wood. In this case, you need to quickly remove the chainsaw from the cut. A wedge or a special felling blade is inserted into this cut. By pressing with your hands or using a wedge, the barrel roll is ensured.

If you need to cut a trunk with a diameter of up to 50 cm, you should use an additional cut.

Before making the second horizontal cut, make another bevel cut, then join them together. This technology eliminates the risk of the chainsaw cutting element being stuck.

Then the branches and twigs are cut down. The trunk is sawn into pieces. It is recommended to cut the trunk by lifting it horizontally above the ground. You can use goats for this.

Additional guidelines can be followed to ensure proper felling of trees. You should not put significant effort on the chainsaw: with a normal sharpening of the chain, the cutting speed is practically independent of the effort. The upper large branches must not be sawed from below: at the bottom, only a cut is made in no more than half the diameter of the branch in order to avoid jamming the saw. When sawing, it is not recommended that the direction of travel of the saw chain be directed to the body of the worker. It should always be slightly off to the side.

Preparatory activities

When using the chainsaw, the hands must be protected with gloves.

It is possible to cut a tree with a chainsaw correctly and safely only after carrying out certain preparatory work. First of all, it is necessary to clear the place for work, as well as the path of possible retreat from the falling tree. So, the free space on the working side should be: with a trunk diameter of up to 20 cm. at least 80 cm; with a diameter of up to 30 cm. not less than 1.2 m; with a diameter of up to 50 cm. at least 2 m. The working area is determined after calculating the direction of fall.

The preparation of the tree itself consists in cutting off branches and twigs from the trunk, which are located below the head of the worker. Clears the direction of the fall.

Before starting work, you should determine the readiness of the chainsaw. The condition of the cutting elements and the chain tension are assessed. Gasoline filling and oil level are checked.

Required tool

When felling trees, you need the following tools:

  • chainsaw;
  • ax;
  • hacksaw;
  • wrench;
  • screwdriver;
  • felling blade;
  • felling wedge, metal or plastic;
  • roulette;
  • pliers.

The question of how to properly cut a tree with a chainsaw must be solved both from the technical side and from the side of ensuring safety. Sometimes, it is safety that determines the quality of work, because technically tree felling is quite simple.

How to properly cut a tree with a chainsaw: safety rules when felling trees

Felling trees with an ax and an ordinary saw is a thing of the past; most owners of private houses and summer residents today acquire chainsaws. It is necessary to have a chainsaw. if there are no old trees for felling on the site, you periodically need to cut branches, and in case of force majeure, it often happens that a large tree falls or splits. here you really need to know how to properly cut a tree with a chainsaw.

A similar situation can develop both in the forest, where you will go on vacation, and in the country. If you notice that the tree is in disrepair and its fall threatens property damage, you should not pull with the felling

Many do not think about safety, but several important rules, in order to avoid dangerous situations, need to be learned.

Chainsaw safety precautions

Yes, there are special rules:

  • Use appropriate footwear and clothing: non-slip footwear, goggles, gloves, heavy clothing. Earplugs help reduce noise.
  • Check if the chain is well sharpened and tensioned. The tension is good if the guide teeth stay in the groove as you pull the chain off the top of the bar. When filling with oil, it is advisable to always check that the chain is well tensioned.
  • Do not work in windy conditions.

How to cut a tree with a chainsaw without harming nearby objects? Try to plan the trajectory of the fall, having previously studied the territory and the tree itself that you are going to cut down. If it is dry, large dead branches, twigs may fall off, so they can be cut down beforehand, and here you need to be careful.

You must leave the work area without hindrance. If there are other trees nearby, try to work so that the sawn branches do not get stuck in their branches, this can lead to an accident, and then it is not easy to get them out. The cut tree you will need to then process and take out or remove from the site. Choose a direction for felling so that you can easily cut and remove the tree later.

Harvesting is an important step after felling a tree. Choose a place for the fall of the tree where it will be convenient to cut it into pieces, and then remove it from the site or load it onto a machine

The order of work when carrying out tree felling

Undercutting takes place in several stages. The first (upper) undercut is made at a quarter of the trunk diameter, at an angle of 45 °, you need to approach the tree from the side of the fall. Then an undercut is made from below. It is done horizontally to the level where both undercuts are connected. After making two notches, you should have a 45 ° angle cut into the trunk. Do not cut the tree completely, otherwise it will be impossible to guess in which direction its trunk will fall.

The felling cut is now in use. Before starting work, make sure that there are no people, pets or objects that can be damaged in the fall area. The felling cut is made on the side that is opposite to the intended direction of the fall of the trunk, it should be located at a distance of five centimeters from the bottom notch, parallel to it.

When felling cut, leave a hinge. 1/10 of the total diameter of the tree trunk. This is important as it provides the correct trajectory for its fall. If you do not make this cut, or make it less than the specified size, the trajectory of the tree falling will become unpredictable.

Slowly lower the saw into the trunk. To prevent the tire from getting stuck in the trunk, insert a wedge into the felling cut before the tree starts to fall. The wedge should be made of plastic or wood, the metal wedge can damage the chain. Engine speed during saw operation. maximum.

As you work, pay close attention to where the barrel is going. So you can take timely action if you feel that the fall has gone in the wrong direction.

Arrows indicate cuts: 1. upper, 2. lower, 3. felling. The unfinished part of the tree is a hinge to prevent falling in an unwanted direction

Two options for the notch: in the first case, a double right angle was cut, it is more difficult to make it, but the tree is guaranteed to fall in the direction you planned, in the second case, the most common option of the notch, described above, is performed

When the trunk begins to fall, quickly remove the saw from the cut, turn off the engine and leave the work area. Perform all actions quickly, delay can be dangerous.

Advice. It is more convenient to cut a tree in the direction of curvature, the greatest development of branches and branches, if the trunk is flattened. in the direction of a smaller diameter.

The video below demonstrates an example of work. fast felling of a tree, where a minimum of time is spent on performing the necessary undercuts:

That’s all, we looked at how to properly fell trees with a chainsaw. if you follow the above rules, you can easily knock down the tree you want. And the main thing here is to be attentive and focused. Before the first felling, you can practice on a small dry tree, if you have one on your site, or look for one in a nearby planting.

How to cut a tree correctly. practical advice

First, you need to clearly study the process of cutting down trees, and then apply it in practice. Of course, the more experience you have, the better and faster all the work will happen.

For safety reasons, do not deviate from the work plan and follow the sequence of actions, do not rush.

  • Outline for yourself the approximate place where the felled tree will fall. This area is called dangerous. There should be no houses, no people or animals here. The area is expected to be twice as tall as the tree itself.
  • Once you have determined the direction you want the tree to fall, plan the side you will start sawing from, it may be better to start at the top, removing branchy branches and other parts. To orientate the fall, you can stretch a rope from the trunk to another object or plant. Sometimes you can ask a helper to pull the rope on their own while in a safe area.
  • Security starts with you. You must prepare your workwear in advance. A protective helmet is usually worn on the head, the shoes must be strong so that you stand firmly on your feet, it is advisable to purchase leather gloves on your hands so that the tool does not slip out of your hands.
  • Favorable weather conditions for cutting down trees. it is the absence of any wind or rain.
  • If you are new to this business, then your cutting equipment is a bow saw or a special hacksaw for wood. Chainsaw is preferred only by professionals.
  • Then make a so-called notch by sawing out a piece in the form of a blade.
  • The final cut should be made on the other side of the first notch, leaving the fibers in the center.
  • If the tree does not fall immediately, step aside and ask a helper to pull on the rope.

Do not forget that not all seasons are suitable for cutting trees, you can find more about this https://goo.gl/3PvU8L here.

How to properly cut a tree with a chainsaw

Very often, when arranging a garden, building a house on your own or while caring for a park area, it becomes necessary to get rid of an old, ugly growing, or just an extra tree. It usually takes too long for the tree to succumb to the felling by itself, so people prefer to use technical tools for cutting work. In this article, we will study how to properly cut a tree, be it a strong, spreading or old tall plant.

How to cut a large tree?

It is often required to find the answer how to cut down a tree, in this case the solution is very simple. It is necessary to correctly plan the course of action during work and observe the proportionality of the cuts. In addition, in park areas, you often have to work with tall plants. Therefore, another question arises, how to cut a tall tree? In these cases, renting an aerial platform for an hour can help you http://gsrlift.ru/auto/ from the company “Gorspetsremont”.

  • To cut a tall or large tree, you need to steer the bar at a 60-degree angle. This is done from the side on which the tree is planned to fall. The trunk is sawn to a quarter of the diameter.
  • The second slice is done below. A triangular layer is cut.
  • Then the transition to the other side is carried out and a small horizontal cut is made.
  • After the work done, a wedge is placed in the cut, an expander for the felling. Several blows to it with an ax or a sledgehammer and the tree should fall.

How to cut a tree with a chainsaw?

In this paragraph, we will list several rules and answer in detail the question of how to cut a tree correctly. Due to the fact that such a tool is affordable and widely used in the preparation of firewood and performing work in the garden, on the site and during construction, adjusting the design of the park, the chainsaw has become the most necessary item on the farm. To complete the assigned tasks, you will need the following inventory:

How to Fell a Tree with a Chainsaw

  • Garden saw or saw, chainsaw or saw: Any of the following items will work for cutting trees
  • Personal protective equipment: underwear, goggles or visor, leather gloves, hard hat, sturdy ankle boots
  • Rope with winch

Observe the following instructions:

  • When working with a chainsaw, first check its serviceability, it must contain the appropriate fuel, this is a mixture of gasoline with a specific oil. It is very important to keep the correct proportion of each substance. The chain also has a special reservoir where the chain oil is poured. This element of the tool must be taut, if you want to check it, you can put on a protective glove and scroll. The pulling force should be great at preventing scrolling, but at the same time, amenable to the process. Remember to check with the engine off. Also look into the tire, this hole should not be dusty.
  • Prepare the area around the tree considering its length, growth slope, and branch size. Apply the knowledge gained from the first list of rules for beginners. In this case, professional tree cutters can use a cable with a winch to create tension and correct the direction of fall of the trunk. Thanks to the rotating handle in the winch, this can be done with ease.
  • Then start with the saw that it works fine, the sound is smooth, the chain is tensioned correctly, watch it make the first cut. Do not continue working if the saw starts to brake and gets stuck in the trunk. The first cut is made horizontally, from the side of the expected fall of the tree. The cut should be one third of the thickness of the entire trunk. The angle of the second cut to form the wedge is no more than 45 degrees.
  • Above the first cut, a second additional cut is made, the so-called horizontal felling cut. It should not come into contact with the wedge made in the trunk, it is best to form at least 5 cm between them. When tilting the tree and then filling, stop sawing, push the trunk in the right direction and let it fall, moving a safe distance from the stump.

How to cut a large tree in pieces?

When cutting down a large tree in parts, it all starts with cutting off excess branches and crown of the tree. Their fall is insured. There should be no wires or areas with people, animals, houses in the environment.

Then, all of the above points of cutting large or tall trees are observed.

Always follow safety precautions, and then no trouble will happen.!

How to use a saw correctly?

Immediately, we note that the technique of felling large and small trees is different, and it is difficult not to notice it. The easiest way, as you might guess, is the case with “small things”. Therefore, we will start with her. So, what do you need to do to see a sawn tree at your feet??

First, you need to make a neat cut with a saw in the direction where the trunk is tilted (at least a slight tilt is almost always there). If the tree is perfectly straight, then the cut is made in the direction where you plan to dump it. Don’t be zealous! Cutting should be done at 50% of the trunk diameter, and not strive to immediately brush off the tree with one “light movement”. If you are using a saw, be sure to let the tool cool down from time to time.

How to properly cut an already felled tree trunk?

Sawing should be started from the most distant branches. Small branches can be chopped off with an ax, or simply cut with a saw. But large pieces are first sawed off from above, and then cut from below. This should be done so that the sawn wood does not tightly clamp the tire of your saw. The same goes for the biggest bitches.

We think it would be useful to remind you. when working, try to put blocks of wood under the tree trunk being sawn so that the tool chain does not touch the ground during operation. Otherwise, it will become dull very quickly, and in especially severe cases it can tear at all, touching and crippling the unlucky lumberjack. So we figured out the “trifle”.

Now let’s talk about “mastodons”: how to cut down a tree correctly? The technology for felling large trunks is distinguished by some nuances that are of great importance. Carefully follow the sequence of work described by us, as the consequences of not performing them can be serious.

We bring down big trees

Remember what we said about the importance of choosing a stall direction? If you need to cut down a tree of “monumental” size, then these rules become even more relevant. In the case when a small branch falls on your head, or on the roof of your house, then there is nothing wrong with that. But in the case when a huge and old poplar collapses on the same surfaces, then nothing good will definitely happen.

After that, go to the opposite side of the tree and make another horizontal cut exactly opposite the first. In this case, it is extremely important to make sure that it does not reach the first by about 10% of the total thickness of the trunk. Finished?

And now insert a wedge (or a special expander for felling) into the resulting saw cut. Pounding on it with a sledgehammer or the butt of an ax, we “finish off” the tree, initiating the beginning of its fall. There is also an easier method of felling, which is used by experienced lumberjacks: the tree is cut through (this requires a long tire and a powerful saw), and then the tool begins to advance in the direction that the trunk needs to be dumped. It will turn out to be half-cut. A wedge is inserted into it in the same way, and the operation that we have already described above is repeated.

Saw safety rules

Is it possible to cut trees using an electric tool? Not everyone likes to work with gasoline saws, which make a lot of noise and smoke. saws when felling trees are no worse than their “liquid fuel” counterparts, but when working with them at this moment it is extremely important to observe at least basic safety rules!

Please note that only sufficiently thick oil can be used for electric saws. Spindle and transformer oils are not suitable for these purposes at all! Do you think these are small things? Unfortunately no. Suppose you decide to cut a tree: where to turn if a broken chain “snaps” a decent piece from your leg? So spare no lubrication!

Completion of work

Gently file the trunk on the other side, “grabbing” that moment, until it starts to fall. After that, quickly move away from the place where the top of the tree you cut down should fall. If the tree is very small, then it will be easiest to first saw it off at the level of your shoulder, and only then carefully cut the wood piece by piece. Everything, in general.

Where will the tip fall?

First, take an ax in your outstretched hand and stand next to the tree. Go in the direction where you are going to bring down the “baobab” until its silhouette is visually equal in size to the ax. Fix this moment and look under your feet. you are just standing at the very place where the sawn tree will fall (more precisely, its top). If you didn’t come across a neighbor’s fence or house along the way, then everything is in order, and you can get to work. In the event that something like a power line will inevitably meet on the path of the falling tree, you better immediately change the direction of the tree felling.

Other rules

Do not work with reduced mains voltage! In conditions of increased voltage, protection will work, but when its value decreases, the saw will work, catastrophically overheating. By the way, saws are devices that are not designed for long-term use. After a few minutes of work, be sure to pause to allow the saw to cool down.

What to remember

If you are bored to death of a tree on the street behind a fence, and you want to get rid of it, first talk to your local government. The point here is in legal collisions. It happens that the territory, which begins literally behind the fence of the dacha, belongs to the local forestry, and the fine for a sawn tree, felled without a permit, is up to five thousand rubles. The liability of legal entities can exceed 200 thousand rubles.

How to cut a tree correctly

Well-groomed parks, squares, gardens and just green spaces in the yards are pleasing to the eye, but like any living organism, trees need systematic care, which consists in watering, feeding, fertilizing, whitewashing, pruning branches. Unfortunately, plants do not last forever, so sometimes you have to resort to more drastic measures and remove them completely. This is where the question arises of how to properly cut a tree in the country, the price of the process is also of great importance.

In answering this question, experienced experts advise not to rush. The first step is to pay attention to the preparatory stage. The method of holding the event, as well as its cost, will depend on how accurately the situation, scale and scope of work will be assessed. It is more economical, of course, to do everything yourself, but there are also a lot of nuances here. For example, not everyone knows how to properly cut a tree with a saw, because not everyone knows how to use this tool. In addition to complying with all safety standards, you should have the necessary skills to work with a power tool.

So, how to properly cut a tree with a chainsaw, advice from experienced professionals:

  • First of all, you need to take care of the workwear, i.e. about protecting those areas of the body that are most vulnerable. These are eyes and hands, so a pair of gloves and goggles will not be superfluous. It is also advisable to wear comfortable shoes on your feet.
  • After that, the instrument itself should be inspected for its technical serviceability. Fill up with gasoline and oil.
  • The third step, how to properly cut a tree (photo above), should be clearing the area from interfering elements. over, cleaning the site for the fall of the trunk is not enough, it is imperative to take care of the retreat path if something suddenly goes wrong. It is also advisable to make sure that there are no accidental witnesses of the process, as well as pets, within a radius of 10 meters from the removed tree.
  • Removal should begin with pruning the lower branches. To do this, the chainsaw must be held firmly with both hands, legs slightly apart for better balance. You need to cut not with the end of the guide plate, as this can lead to inevitable kickback, but with the entire surface.
  • Having removed all branches from the trunk, you need to immediately clean them up so that they do not interfere with further work.
  • If you are not sure if you know how to properly cut a tree in parts, then you should know that the trunk is sawed in several stages. First, the first cut is made from the side of the natural inclination of the trunk. there the tree should fall. The depth of the first cut should be ¼ of the trunk diameter. Then, going to the opposite side, you need to make a second horizontal cut 2 cm above the bottom of the first cut. When making the second cut, you need to leave a small distance to the first notch, thanks to which the object will not fall immediately, but will fall gradually, and this will also avoid the chainsaw being clamped by the trunk of the falling tree.
  • The next step will be to drive a wedge into the place of the horizontal cut. With a little effort and using the hammered wedge as a lever, the tree falls. As soon as it starts to fall, it is necessary to move 5 meters away from the fall.

This method is called “felling the tree towards its natural inclination” and is the easiest and most economical way to remove an object within the city or in a summer cottage. But it is not always possible to use it.

A tree scientist is a company employing specialists with many years of experience in cutting unnecessary or dangerous green spaces. We have thoroughly mastered all the skills of this process and know exactly how to properly cut down a tall tree or remove an emergency plant from your site. By contacting us, you will not only receive a professional and guaranteed quick solution to problems, but also detailed advice, as well as answers to all questions.

Cutting a tree quickly and efficiently, or as specialists do it

The professionals of our company know how to cut a tree correctly. And all thanks to the experience / skills, as well as the availability of the necessary equipment / tools. We provide a sawing service 24/7/365 in the city of Moscow and the region, we work for both legal entities and individuals.

Cut a tree: important subtleties

Thinking about the question of how to cut down a tree correctly, many come to a dead end. This is because in practice it is not as easy as in theory. Therefore the best solution. entrust the saw cut to professionals who will quickly and efficiently cope with the task.

To cut a tree you will need:

  • chainsaw / stump crusher / aerial platform. An ordinary saw that has on the farm is unlikely to cope with a tall and large tree, and there is no need to talk about the presence of a crusher / aerial platform;
  • knowledge of techniques and techniques of saw cut;
  • compliance with security measures. falling tree. several tons in motion that can cause irreparable harm.

Only by approaching the sawing process carefully and scrupulously, you can get the expected result.

How to cut a tree correctly, or the help of professionals

The tree can be emergency, that is, sloping and threatening to fall, old and rotten, or interfering in a certain area. In this case, you need to remove the tree so that it does not catch the house of a neighbor, and does not crush anyone. The professionals of our company who have the necessary experience, skills and knowledge will be able to cope with the task.

How to cut a tree correctly?

Ways to cut trees, or knowing the subtleties

A team that has left for the place will help prevent the emergency tree from falling. Masters will complete the task in a coordinated and responsible manner, observing safety measures.

The foreman who went on call:

  • appreciate the complexity and scope of work;
  • will protect the territory of the saw cut of the tree;
  • will choose one of the most effective ways to cut in this particular case.

And only after that, the specialists will begin work, sawing the tree in parts or cutting it down entirely. And the tree will no longer be life-threatening!

Marina Semenova | edition Spiel99

I freely, by my own will and in my interest, give my consent to the limited liability company “IP Berezin A. V.”, OGRNIP 315463200005170 (hereinafter referred to as the “Company”), to the processing of my personal data on the following conditions.

List of processed personal data

The personal data processed by the Company includes the specified data directly provided by me from the list below, as well as the data I have discovered that are published on the Internet and are freely available there. The provision of personal data by me to the Company can be made both at the moment I give my Consent and at any time later, during the validity of the Consent. The personal data provided by me during the validity of the Consent is processed on the terms of the Consent, unless I give another consent to the processing of personal data.

Identity data, that is, data by which you can establish my identity: surname, name, patronymic.

Contact details (that is, data by which you can interact with me): address of residence, address of location (stay), mobile phone numbers, landline phone numbers, e-mail addresses, public profiles on the social network, my identifiers on the Internet. messengers.

Actions performed with personal data

Consent is given to any action or set of actions performed with personal data, including collection, recording, systematization, accumulation, storage, clarification (update, change), extraction, use, depersonalization, blocking, deletion, destruction of personal data, transfer of personal data to Society archive.

Consent is given, among other things, for the Company to conduct research using my personal data, including statistical research, as well as the transfer of my anonymized personal data for research, including statistical research, to third parties.

Purposes of processing and method of processing

The purpose of processing personal data is:

  • contacts with me as a potential consumer of the Company’s services to promote the Company’s services;
  • increasing the quality of the offers from the Operators provided to me, for which the Company can organize a study of my personal data, including statistical data, as well as a study of the actions and reports of my equipment.

Processing method personal data by the Company. automated processing.

My consent does not prevent me from giving the Company other consents to the processing of my personal data. In the event that I have given several consents to the Company in relation to the same personal data of mine, the one given later is valid, and only in the part in which it differs from the Consent. My other consent to the processing of my personal data does not cancel the Consent and changes it only in the part in which it will be directly indicated (or obviously follows from the texts of the consents).

Method of providing Consent and personal data. Formation of Consent on a medium

I can provide my data and change their provided volume via the Internet, including, but not limited to, through questionnaires, mobile applications, authorization in social networks, by phone, by codes in SMS messages, through a unified identification and authentication system (ESIA). I can provide my data and change their provided volume by applying to the Company on paper, with the certification of my signature by a representative of the Company and / or a notary.

The formation of Consent in an objective form (on paper or in electronic form) is carried out by combining in an automated way the personal data provided by me and the form of this Consent.