How to cut ceramic tiles with a glass cutter

Articles

Stage 3. the nuances of cutting tiles with a glass cutter, advantages and disadvantages

Special power tools and electrical appliances are much more convenient for cutting ceramic products than glass cutters. But such special devices are much more expensive. Therefore, if tile cutting is carried out at home with small amounts of work, it is more practical to use a glass cutter. After all, it is completely inappropriate to use expensive tools when you only need to cut a few tiles.

ceramic, tiles, glass, cutter

The glass cutter has some advantages over other tile cutting devices:

  • affordable price;
  • ease of use.

But the use of a glass cutter also has significant disadvantages:

  • it is not suitable for large volumes of work;
  • the tool is not able to cut through dense tiles;
  • there is a possibility of spoiling the tile.

Using such a tool is not very convenient. The cutter has a small roller that makes shallow grooves. Therefore, you have to break the tiles by hand, which creates the risk of cracking the tile or its uneven break. Because of these sequential marking, notching and breaking procedures, the entire process of cutting the clay plate is quite long and tedious. Therefore, it is not recommended to use a glass cutter for large volumes of work.

Another glass cutter with its small roller is not able to cut through heavy-duty porcelain stoneware. He, too, is unlikely to scratch thick floor tiles to the depth necessary for breaking. The tool is only capable of cutting through thin wall tiles. Therefore, for large volumes of work or cutting powerful products, it is better to purchase a special tile cutter.

Tile cutting

How to cut tiles with a glass cutter

  • Which glass tile cutter to use
  • How to cut a tile with a glass cutter
  • Other ways to cut tiles
  • Grinder
  • Drill
  • Hacksaw
  • Jigsaw

The tiling procedure always involves cutting the material in question, requiring a tile cutter. Sometimes it happens that a special tool is not at hand, or it turns out to be unsuitable for work. In this case, an ordinary roller glass cutter can come to the rescue, as well as a number of other tools. In this article, we will tell you which glass cutter is most suitable for cutting tiles, we will analyze the whole process in detail and tell you about other devices that can be used for this operation.

Work procedure

Before properly cutting a tile with a glass cutter, it is important to remember that the procedure for cutting glass and tiles looks the same, except for the way of marking and the applied forces for breaking. So, if you have experience in cutting glass, then there will be no difficulties. The cutting procedure will look like this:

  • the working surface must be flat, firm and not have any unevenness;
  • Lay the tile face up on your work surface and use a ruler and marker to mark the intended cut line. It is advisable to use a marker that can be easily erased from the surface of the product;
  • further, without removing the ruler from the cut, take a glass cutter and attach it to the top of the tile, using a metal ruler as a guide;
  • Apply pressure to the tool and draw a notch line along the entire length of the material. Cutting the glossy surface will result in a significant reduction in resistance when fracturing. Using a disk glass cutter, it is enough to walk over the surface once;
  • after the cut is made, place an iron nail or a wooden block of the same size under the tile, clearly parallel under the cut line;
  • with a translational force, gently press on the edges of the tile, trying to evenly distribute the load. If everything is done correctly, then the product will burst exactly along the cut line;
  • inspect the end edges of the tile and make sure that they do not have large chips;
  • sand the edges of the garment for a finished aesthetic. This procedure must be done as carefully as possible so as not to injure your fingers on the sharp chips of the ceramic coating.

    • Video on how to cut tiles with a glass cutter:

    How to cut

    If you know how to cut glass, then these skills will certainly come in handy when cutting tiles or ceramic tiles, since these processes are essentially the same.

    They differ only in how the marking is done and what efforts need to be made when breaking.

    Cutting the tiles is not difficult, but it will take some time to, as they say, “fill your hand”. To do this, you can use unnecessary pieces of tile to work out or adapt to the force that will be required for a particular material. Do not neglect the “little tricks” that every experienced craftsman has in stock. Step by step, the cutting process looks like this:

    • Prepare your desktop. It must have a flat and solid surface.
    • Place the tiles face up on the table. Use a ruler to draw a cutting line with a marker. (Use a water-based marker, then it can be easily removed with water).
    • Along the line you have drawn, attach a ruler and run the glass cutter over the tile from the far edge of the product towards you. Use a metal ruler as a guide and try to distribute the force equally when pressing down on the cutter. The cut is ready!
    • We put a wooden block under the tile (along the cut line) and press on both sides. The tile is easily split into two halves at the cut.
    • Look at the end of the cut line. If large chips are visible on them, then sand the edges of the tile with medium or coarse sandpaper. This will give the details a complete look.

    It is worth clarifying some important points:

    • Do not cut the tile material in advance, but do it during the installation process. With this option, the minimum amount of scrap of tile material will be obtained, since very few people manage to accurately calculate the distance between the tiles in advance.
    • Try to apply even pressure to the handle of the glass cutter while cutting. Remember that if you press harder, the surface of the tile will be covered with small cracks. And if you don’t push it, the break line will come out with chips or even break not along the line.
    • It is better not to use a glass cutter if you need to make a cut of less than 1 cm.A short piece of tile can break off unevenly during the cutting process and ruin the entire tile as a whole.
    • And now about the “little trick”. Experienced tilers advise to soak the tile for 3-4 hours in plain water before cutting. After such “water procedures”, the tile material becomes more plastic, and this allows high-quality cutting.

    Benefits of tile

    The tile has many advantages. it does not burn, does not emit toxic substances, it is resistant to temperature changes and chemicals, does not conduct electric current.

    Quite often, tiles are used for interior and exterior decoration of premises. This is due to the fact that it is a highly durable material. Correctly laid tiles are able to withstand a pressure of about 30,000 t / m², which makes them even more durable than reinforced concrete. Consequently, the tile is practically not subject to deformation. Another important advantage of the tile is its hygiene, ease of care, dirt is easily removed from it, and its surface does not contribute to the development of bacteria. The tile is not afraid of moisture. That is why it is often used to decorate bathrooms, showers, toilets.

    The tile does not ignite, does not emit toxic substances when heated, does not undergo destruction upon contact with highly toxic chemical elements. The tile is resistant to different weather conditions. snow, rain, direct sunlight. this makes the tile an excellent material for exterior decoration of premises. A particularly significant advantage is that it does not conduct electric current, so its use is safe in any conditions.

    The disadvantage of tiles, perhaps, is their high thermal conductivity, making them cold when touched. It is unpleasant to walk on a tiled floor with bare feet. However, this drawback can be easily corrected when combining tiles with a warm floor.

    GLASS CUTTER FOR CERAMIC TILES

    All of the above properties of a tile are inherent in it only if it is correctly installed.

    Cutting tiles with a glass cutter

    By the way, if you specifically buy a glass cutter for cutting ceramic tiles, we recommend that you opt for oil models (in which a mixture of machine oil and kerosene is fed to the cutting roller from a container located in the handle), since it will be much easier to work with such a tool.

    Cutting tiles with a glass cutter is quite simple, although it requires certain skills. The tiles must be laid on a flat and solid surface and, once with a strong pressure, move the glass cutter roller along a predetermined line. To get a guaranteed straight line, it is better to use a metal ruler. After that, put the tiles on the edge of the table so that the cut line coincides with its side, after which, with a light enough press, break off the protruding part of the tile.

    There is an alternative way to break ceramic tiles. It is necessary to put a metal bar or a nail under the cut line, then break the tile by pressing on both of its parts.

    Cutting Ceramic Tile with a Glass Cutter

    The edge of the tile after cutting with a glass cutter turns out to be quite rough and uneven, so it will have to be processed with a special file.

    Working with a glass cutter

    The simplest, cheapest and lightest tool for processing ceramic products is a glass cutter. It can be of two types: with a small diameter roller and with a diamond tip. There are practically no special differences in work between them, however, the first tool is more convenient to use. In addition, cutting tiles with a glass cutter is no different from cutting glass.

    Let’s take a look at the step-by-step instructions for working with this tool:

    • firstly, before cutting the tile with a glass cutter, you need to accurately mark the cutting line on its glossy side with an erasable marker or pencil. For this, it is also advisable to use corners or metal rulers. With the ruler along the line, you need to run the glass cutter only once from the far edge of the ceramic to you. over, trying to distribute the force as evenly as possible when pressing the tool. Thus, you will get an absolutely flat line. a depression that weakens the strength of the canvas.
    • secondly, you need to position the tiles on the table so that the notch line on the product and the edge of the table completely coincide. Further, gently holding part of the tile on the table, you need to press on its other edge: the product will break gently and precisely. The edges after all work can be sanded.

    How to properly cut ceramic tiles: 4 ways

    Ceramic Cutting Tool

    The quality of the cladding will depend on how the ceramic material is processed. If you are interested in how you can cut ceramic tiles, then, first of all, pay attention to the following tools:

    • manual tile cutter;
    • glass cutter;
    • electric tile cutter;
    • Bulgarian.

    Using this equipment, you can perform both standard cutting operations and rather complex procedures. For example, cutting rectangular and circular holes, trimming edges. Each of these tools is used for a specific amount of work. In addition, it has its own functional features that must be taken into account when starting the process of processing ceramics.

    How to cut with a manual tile cutter?

    This tool is only used for making light straight cuts. With it, you can cut the tiles either evenly or diagonally. In this case, the direction does not matter. This equipment is very easy to use. At the same time, before cutting a tile with a tile cutter, you must have a general idea of ​​its structure. The tool is a base where special tubular runners are fixed. A carriage with a hard alloy roller slides over them. After marking, the tile is laid on this base in the required way.

    Here are the basic guidelines for using this tool:

    • it is necessary to apply a roller to the tile and make a neat cut using a special handle. In this case, only one cut is needed. Don’t cut the same spot two or three times. The result will be disastrous. the material will break completely in the wrong way. It is also because of this that you need to carefully monitor the sharpness of the cutting device. On specialized professional models, it is removable, so, if necessary, a dull roller can be easily changed.
    • it is worth noting that in order to obtain high-quality tiles when working with such a tool, you also need to be able to correctly break the material. On the basis of the equipment, in the course of the cut, a small tubercle is provided, which raises the edge of the ceramic product clearly above the cut and then releases its ends. It is thanks to this that the tubercle, together with the slot on the tile, acts as a guide for breaking. In addition, the product also breaks with the help of a movable T-shaped heel, which is located in front of the roller. This heel must be set exactly in the middle of the cut so that when the lever is pressed, it presses on the blade. This tile cutter can also cut diagonally.

    How to properly cut ceramic tiles: 4 ways

    Ceramic tiles are a very durable and attractive facing material in all respects. However, the tiling process is not as easy as it sounds and requires patience and preparation. In order to successfully install this material on the floor, on the wall, around the edges of the room, around electrical appliances, window frames, pipes or various protrusions, it is necessary to use specialized equipment. However, before starting directly to work, you will definitely need to decide how and how to cut ceramic tiles.

    • 1. Tool for cutting ceramics
    • 2. Working with a glass cutter
    • 3. How to cut with a manual tile cutter?
    • 4. How to cut tiles with an electric tile cutter?
    • 5. We cut ceramics with a grinder

    How to cut tiles with an electric tile cutter?

    If you plan to work with very hard and large-format tiles, then it is best to use professional equipment. an electric tile cutter. To work with such equipment, certain professional skills and abilities are required. In particular, since the cutting process is rather complicated and time consuming. However, nevertheless, if you are interested in how to cut ceramic tiles as quickly and accurately as possible, even with very large volumes, then an electric tool is the best choice. Such equipment is quite expensive, but it pays off with repeated use and can serve for several decades. The design of the electric tile cutter is almost identical to the modern circular saw. The main differences are the discs used and the presence of water trays.

    Another feature of these machines is the ability to carry out a neat bevel cut. This is very useful when cladding outside corners. In this case, the need for aluminum or plastic corners is completely eliminated. The product, which is docked in a corner with a 45-degree cut, looks very interesting.

    We present to your attention a short instruction manual:

    • pour water into the bath so that it overlaps the disc by 2-3 centimeters;
    • we measure the part of the tile that needs to be cut off and put it on the machine;
    • then we press our canvas to the machine and slowly bring it to the disk. It is not recommended to press hard on the disc, as it may stop;
    • now you need to make an incision along the second line. To do this, carefully lift the tile and do a similar procedure.

    We cut ceramics with a grinder

    The grinder gives very great opportunities for cutting. it can easily and accurately not only cut along straight lines, but also make curly cuts. If desired, using a grinder, you can cut a beautiful round hole with a diameter of 70 mm in the tile. In order for practically no chips to remain on the glossy surface, it is necessary to use only a new diamond wheel and cut from the back of the product. Therefore, before you cut tiles with a grinder, you need to make sure of the quality of the circle and its functionality. We do the markings, trace the markings with the disk and break off the long part. Break off the rest. The corners can be trimmed with tongs or the same grinder.

    A grinder equipped with a diamond disc is, in fact, a universal tile cutter. In order to increase the efficiency of the tool, the equipment can be equipped with a special cooling system. Of course, this increases the cost of the tool, but at the same time increases its productivity. It is thanks to its effectiveness that the grinder is quite widespread today.

    Tile markup

    • glass cutter;
    • ruler;
    • marker;
    • nippers;
    • roulette.

    Cutting ceramic tiles with a glass cutter is not very difficult if you adhere to certain rules.

    And first of all, this is the marking of the material according to predetermined dimensions, taking into account the thickness of the seam.

    Tile cutting scheme with a glass cutter.

    Putting it on a flat surface, mark 2 points with a thin marker, and draw the line of the intended cut. To do this, use a ruler or flat rail. It must be put on the drawn line and you can start cutting. It is important to hold the cutter correctly. It should be in an almost upright position. Pressing on it with force with your index finger, you need to draw a line from the opposite side of the tile towards you. An accompanying faint crackling sound and a thin line indicate that the ceramic tile was cut correctly. If the glass cutter is blunt or not held correctly, small fragments will appear on the line. Before starting work, it is better to practice on small pieces of material and understand how to cut ceramic tiles.

    Curly cutting

    It is more difficult to cut tiles in places where water and sewer pipes exit and where a mixer is installed. Knowing the diameter of the pipes, you need to cut curly holes with a glass cutter. To do this, it is recommended to cut the tiles to the point where they enter the bathroom. Prepare a plywood template. Try to accurately measure. If, for example, a pipe with a diameter of 20 mm, then you need to cut off 25 mm. Attach the template to the tile and draw an oval with a marker. Then draw a cutting line in one motion. To make it easier to break out unnecessary material, tilers recommend drawing several radius lines inside the outlined oval.

    How to cut ceramic tiles with a glass cutter

    Tiling of walls and floors in rooms is considered practical and durable. Having made the calculation of the required amount of finishing material and purchasing it, they begin to work. Measure the area of ​​the surface to be trimmed. Often the ceramic tiles do not fit completely and are cut off. You can cut with a special device. a tile cutter, but if it is not there, you can try to do it with a glass cutter.

    You can cut it in much the same way as cutting glass. Since the material is quite fragile, it is better to first consult with a master finisher and get advice on how to cut the tile with a glass cutter. A roller tool with a diamond tip can be used to cut tiles.

    Considering that the glazed surface of ceramic floor tiles is more durable, it is better to cut them with a tile cutter. The glass cutter will only spoil the material. And for porcelain stoneware, a grinder is suitable.

    Fracture along the cut line

    To break a tile, you need to lay it on a flat surface with an acute angle. The line must be at the corner. This can be the edge of a table, workbench, or stool. Press hard on the edge. The fracture should be neat. If any irregularities remain, they can be cleaned with a file or fine-grained emery paper. This method works well when dividing a tile in half or ¾. If you need to remove a few centimeters, then it will be more difficult to break.

    Draw a cutting line. If you need to remove more than can be taken at one time with pliers, then several lines are made. First, the material is removed along one line, then along the other.

    When curly cutting with pliers, the material is selected in small pieces, breaks off from different sides of the desired figure. Then you need to use files and carefully align the edge.

    Preparation for work

    First, you should decide on the number of tiles and purchase a little more elements ahead of time than calculated by the area. This will allow you to perform a training cut and hedge against marriage.
    You will need the following set of tools:

    • glass cutter;
    • strong ruler or triangle with a thickness of 2-3 mm;
    • a device for applying markings. a marker or pencil;
    • thin lath made of wood;
    • grinding device. file, file, drill with grinding attachment.

    Since a glass cutter roller is recommended for working with tiles, you will need a roller lubricant. From the preparatory work, one can mention the obligatory soaking of ceramics. Water will fill the smallest pores and cavities in the material, the tiles will become less brittle and will not crumble during cutting. Minimum soaking time. 1 hour, optimal. not less than 3 hours.

    How to cut tiles with a glass cutter?

    With a small front of work on laying tiles, there is no need to purchase complex expensive tools such as a grinder or tile cutter. You can get by with a simplified version. a glass cutter, which most home craftsmen always have at hand. You will find step-by-step instructions for cutting tiles and important nuances of work in this article.

    Hacksaw

    A hacksaw for metal is an alternative option for cutting tiles with a glass cutter. Sawing is performed only with carbide blades or sprayed strings.

    The marking and preparation is carried out according to the standard algorithm. the tiles are soaked in water and the cutting lines are marked with a marker. The tile unit is laid on a clean, even base (countertop), leaving the hanging part marked for the cut. They fix the tile by hand and make an accurate and even cut with a string.

    A circular cutout for a hacksaw pipe is also not particularly difficult. With a pencil, draw a circle under the tube and drill a hole in the center. A sawing string without a frame is threaded into it, and then the hacksaw is assembled into a single structure. It remains to saw off the intended area and remove excess segments.

    Advantages and disadvantages of cutting tiles with a glass cutter

    Pros of using the device:

    • cheapness and mobility;
    • simplicity and high speed of work;
    • noiselessness;
    • does not require personal protective equipment.

    Cons of cutting tiles with a glass cutter:

    • not suitable for processing a large number of tiles;
    • unable to cut through too dense and thick ceramics;
    • some models are not suitable for processing tiles;
    • high probability of damage to the processed material.

    Grinder

    The angle grinder is suitable for both straight and complex tile cutting. It can give the tiles a certain silhouette, make oval, round and rectangular cuts, cut at an angle of 45 °. The best tips for processing tiles are diamond-coated steel discs, combined wheels, segmented and solid dry cutters.

    But first, you need to study the marking of the disc and make sure that it is suitable for working with this type of ceramic. Solid dry cutters, due to the design features, require thermal relief. water cooling. And they can work continuously for no longer than 15 seconds.

    Segmented models are a better option, moreover, with their help, it is possible to cut thick tiles. floor and porcelain stoneware.

    Jigsaw

    Electric jigsaws are equipped with a wide variety of attachments, including those suitable for cutting tiles. The edges of the nozzles are made of hard material with diamond or tungsten carbide spraying, which provides increased strength.

    How the tool works:

    • Carry out markings on the surface of the tile.
    • Fix the nozzle and check the reliability of the connection.
    • Bring the device to the tile, starting cutting strictly at right angles. So that the tile or tool does not deteriorate, they move carefully, without jerks, jolts and additional efforts.

    Other ways to cut tiles

    Using a glass cutter is not the only way to cut tiles. You can use a whole series of tools that can handle processing.

    Stage 2. performing cutting of ceramics

    Cutting a tile with a glass cutter is similar to cutting glass with the same tool. The soaked and marked ceramic sheet should be placed on a flat hard surface with the glossy side up. It is best to wear work gloves to avoid injury to your hands. It is required to draw along the marking line with a glass cutter, pressing on it. For line accuracy, it makes sense to use a ruler, angle or template as a guide. It is recommended to guide the cutting tool in the direction from the far edge of the ceramic towards you. The pressure on the cutter should be of medium force in order to both cut the tile and not crush it.

    When cutting ceramics, the main thing is to cut through the strong outer layer. You will get an even, thin line of the groove, weakening the strength of the tile. For a thick plate, you need to make a groove on the back side. The groove from the glass cutter remains shallow, it is impossible to cut the tile with a glass cutter. Therefore, a refined clay product must be broken into two parts along the notch line.

    In order for the tile to be of high quality after cutting, without cracks, you must be able to break it correctly. There are several ways to separate pieces of a clay plate:

    • It is necessary to position the tiles on the table so that the notch line and the edge of the furniture coincide. With one hand, you need to hold the edge of the tile left on the countertop, and with the other hand, gently press on the free part of the ceramic. Thanks to such manipulations, the tile should gently break along the groove line.
    • Put a match or a small nail along the cut line under the tile and lightly press on both sides with your hands. If the cut is made correctly, the tile will split along the groove line.
    • If it becomes necessary to break off a narrow strip of tile, then it is better to disconnect it with pliers.

    To break evenly, you need to evenly distribute the force along the entire notch line. When separating the parts, do not raise them high, otherwise they may fall and break. If irregularities have formed after cutting, then they can be broken with carpenter’s scissors. If necessary, cut the tile not straight, but in a circle, you need to make a marking with a pencil, make a notch with a cutting tool and carefully bite off small pieces with pliers, forming a depression.

    At the end of the work, it is advisable to grind the cut point with coarse sandpaper or a grinding stone. You will get a beautiful smooth surface, the cut will look neat and aesthetically pleasing.

    Stage 1. preparation for work

    If the necessary technology for cutting ceramic tiles is not followed, you can get ugly chipped products. Therefore, you should carefully prepare for work. You should also take into account the factor of future marriage and purchase additional 5 tiles in reserve in case a high-quality cut does not work out and the tiles being processed will burst crookedly.

    Before you start cutting tiles, you need to take care of the availability of the necessary tools in advance. For cutting you will need:

    • glass cutter;
    • metal ruler or corner;
    • pencil for drawing a marking line;
    • sandpaper or emery stone for polishing chipped edges;
    • work gloves to protect hands from damage from sharp tiles.

    The glass cutter comes in two variations:

    • roller;
    • with diamond tip.

    A diamond tool is not suitable for separating ceramics, therefore, only a roller should be used. The tool must be of high quality. A bad cutter will not cut a groove of the required thickness on the tile, and the break of the product will be uneven.

    To prevent the tile from cracking during the cutting process, it must first be soaked in plain water. Moisture will fill the porosity inside the clay product, and it will become more flexible and lose its fragility. The minimum time for such “water procedures” is 1 hour, but it is optimal to hold it for 3-4 hours, especially if the tile is large.

    To successfully cut a tile, you need to correctly calculate its future size. Take into account the distance between the tiles and the gap in front of the wall by 3 and 2 mm, respectively. Therefore, from the distance from the edge of the last laid canvas and the wall, you need to subtract 5 mm. this will be the required width of the future product.

    On a tile soaked in water, it is necessary to measure the required size of the future product with a ruler. On the glossy side, where the glaze is applied, it is necessary to outline with a pencil or felt-tip pen, which can be easily removed, the marking of the future incision. It should be noted that you can only break off the edge of the tile, which is at least 1 cm. Otherwise, you can easily split the ceramics not along the notch line. Therefore, in such a situation, it is better to grind off the excess with an emery stone.

    Cutting tiles with a glass cutter in 3 steps

    Before starting repairs in the bathroom or in the kitchen on your own, it is better to learn how to cut tiles with a glass cutter, because this is a very simple and cheap way. After all, resorting to the help of a master is expensive, as well as purchasing special equipment for cutting tiles. Therefore, with a small front of work, it is better to do everything yourself and with a simple tool. The only thing that is needed in this case is to be careful not to chip the edges of the ceramic product with a glass cutter, and everything will work out.

    Stage 3. the nuances of cutting tiles with a glass cutter, advantages and disadvantages

    Special power tools and electrical appliances are much more convenient for cutting ceramic products than glass cutters. But such special devices are much more expensive. Therefore, if tile cutting is carried out at home with small amounts of work, it is more practical to use a glass cutter. After all, it is completely inappropriate to use expensive tools when you only need to cut a few tiles.

    The glass cutter has some advantages over other tile cutting devices:

    • affordable price;
    • ease of use.

    But the use of a glass cutter also has significant disadvantages:

    • it is not suitable for large volumes of work;
    • the tool is not able to cut through dense tiles;
    • there is a possibility of spoiling the tile.

    Using such a tool is not very convenient. The cutter has a small roller that makes shallow grooves. Therefore, you have to break the tiles by hand, which creates the risk of cracking the tile or its uneven break. Because of these sequential marking, notching and breaking procedures, the entire process of cutting the clay plate is quite long and tedious. Therefore, it is not recommended to use a glass cutter for large volumes of work.

    Another glass cutter with its small roller is not able to cut through heavy-duty porcelain stoneware. He, too, is unlikely to scratch thick floor tiles to the depth necessary for breaking. The tool is only capable of cutting through thin wall tiles. Therefore, for large volumes of work or cutting powerful products, it is better to purchase a special tile cutter.

    At home, a glass cutter will help out

    When you need it quickly, a glass cutter is indispensable. It is nowhere easier to work with him at home: he marked it → jerked at a right angle towards himself → slowly broke the tile, placing a glazing bead or a nail under it. Well, or over the knee, if it’s long.

    Ceramic tiles: features

    We are happy! Expensive ceramics are not affordable for everyone. Now to do the styling without unnecessary scrap. and the trick is in the bag. And with this, just no problems arise, because burnt clay is thin and medium in hardness.

    It is enough to soak the ceramics for an hour or two, it is cut evenly. Adheres to surfaces like a native. Not a job, but a song. Especially when the arms are growing out of the right place and there is something to hedge.

    Jigsaw

    The jigsaw will not take floor tiles, it is too thick. But wall tiles are a nice thing. Especially if you pre-hold the tiles in water for a couple of hours. Then no dust, no chips, and a minute of business:

    • you need to fix the tiles in the grooves,
    • mark the notch line,
    • turn on medium speed on the jigsaw and make through cuts along the contour.

    Curly breaking / cutting

    Rolling pliers or pliers will help. The curly fracture technology is painstaking, although there is nothing special about it. to outline the notches and break away from the fault line. precisely, at a distance of 5 mm. It is more difficult with curly variations if they start from the edge of the tile. You will first have to chisel the hole, then chop it, squeezing the tool and sharply turning the figure according to the idea.

    It is better to crumble, slowly, in small pieces. Otherwise, if you hurry, you will make people laugh. If you break off a large fragment, all efforts are wasted: debris often falls off after the intended cut.

    • Pieces of the entire length, and even narrow, it is better to break out sharply, holding the pliers along the markings made with a glass cutter.
    • Sharp protrusions are best crumbled and sanded.

    Round holes: how to make tiles

    Drill and feather drills help! And it is better to take for work on concrete. those with victorious tips.

    • The former have sharp tips that are harder than the glaze, so they do not slide off the surface.
    • The latter can deepen holes with a diameter of 3-12 mm.

    First you need to make a mark on the tile. Attach a dowel to it and chop it off with a hammer. it will be easier to fix the drill in the mark. Then, at low speeds, make a hole or screw in self-tapping screws with self-drilling tips.

    If you need a hole for a socket on an already tiled wall, it is better to use castellated ones with a centering drill, and you will not find it. It’s easier to work with such. Nakernil contours, set the drill and. to the point. Deepened. drilled with a crown.

    It is worse if it is not centered. Then you have to circle and drill at a low start. You will have to grind the grooves along the contour, then bring the work to the end. Just do not be zealous: the crown heats up quickly, it must be periodically cooled in water so as not to burn out.

    And if you are impatient to cut when laying, there are many options. See in the table:

    How to cut ceramic tiles: 4 hacks for cutting without chips. at an angle, and in a semicircle

    I walked over the tile with a glass cutter and break it. The split will go exactly along the barely visible strip.

    Tile cutters “take” porcelain stoneware and cement floor tiles with a thickness of 6 mm. What’s remarkable: the harder the material, the easier it is to work with. On the cutting tool, you can cut a narrow strip in a straight line or at an angle without chipping. No chipping to you. love to watch.

    How to properly cut ceramic tiles and other material. in the article. Here are the cases when all means are good.

    Porcelain stoneware: how and how to cut it better

    Strong as a rock. It is not surprising: porcelain stoneware is a composite material that has taken the best properties of natural stone and ceramics. It does not crumble, does not absorb water or even scratches. Working with it in the same way as with tiles will not work, but you can adapt.

    A mechanical or electric cutter and a grinder will help out. The procedure is standard: we put the part on the bed → outline the cutting line → and act depending on the tool:

    • to cut with a machine tile cutter, press on the carriage, moving it away from you → release the handle → break the tile along the line;
    • the electric tool simplifies the work: we start the unit at low speed → gradually increase the speed and do not confuse it: on the unit with an upper cutter, we lay the tiles facing up; with the lower disc. down;
    • grinder is even easier: we put a metal corner on top of the tile and fix it with clamps. for an accurate cut. We start the grinder → direct it “away from ourselves” → grind the butt end. Or we simplify: we make a cut, not a cut, then break the tile with a sharp movement.

    Professional tool

    They say about this: “Iron and jelly cuts.” If the volume of work is hoo, it is pointless to suffer with a glass cutter. It will become dull after a dozen tiles. Better to make it easier for yourself with tools specifically designed for cutting. They will be discussed below.

    Glass cutter

    This is the simplest and cheapest ceramic tile cutting tool. It has a different design:

    • cutting element. small diameter wheel;
    • stylus with a diamond tip;
    • roller glass cutter with oil reservoir in the handle. Grease flows down a narrow groove and facilitates notching.

    Glass cutter cutting elements can be replaced as the edge is seamed. How to cut ceramic tiles with a glass cutter? On the front side, a cutting line is drawn with a pencil or marker. Keeping the ruler in line, draw a glass cutter towards yourself from the far edge of the tile. The goal is to draw a uniform depression that reduces the strength of the tile.

    Cutting Ceramic Tile with a Glass Cutter_ITRK SUPPLY

    Then place the tiles on the edge of a table or other flat surface. The notch line should line up with the edge. Holding the edge of the tile on the table with one hand, with the other, gently press on the edge that is suspended. The tile should break at the notch. Its edges are sanded with a file for ceramic products.

    It is advisable to use a glass cutter for small amounts of work. It allows you to make straight cuts vertically and diagonally. Not suitable for cutting floor tiles, porcelain stoneware tiles and tiles over 5 mm thick. It is problematic to cut a strip with a width of less than 20 mm with a glass cutter.

    We cut ceramic tiles with an electric tile cutter

    This tool belongs to the professional category and is quite expensive. With its help, a significant amount of work is easily performed, it cuts any tile quickly, accurately and beautifully. Allows you to make a cut with a width of less than 5 mm, make cuts at an angle of 45 degrees, indentations and holes. It is used for curly cutting. The cut has smooth and slightly rounded edges. In some models, the edge of the blade is immersed in water, in others, the surface at the cutting site is only wetted. During operation, all dust settles in the cooling water tank.

    In design, it is in many ways similar to a circular saw. Consists of a platform, a cutting disc fixed on it and an electric motor.

    How to properly cut ceramic tiles with an electric tile cutter.

    • Water is poured into the container so as to overlap the edge of the cutting wheel by 2-3 cm.
    • Include tile cutter.
    • Press the ceramic tile against the machine and slowly move it under the disc, focusing on the marked line.
    • The blade is moved under the cutting element with a force depending on the strength of the tile. It is not recommended to apply excessive pressure on the knife, this may cause the tile cutter to stop.
    • To cut a corner, the tile is gently lifted, unfolded and repeated.

    It is necessary to monitor the condition of the cutting edge of the disc, replace it in time. Diamond wheels are commonly used. Also, regularly, as it gets dirty, they change the water in the bath.

    Other ceramic tile trimmers

    What is the best way to cut ceramic tiles if you need non-standard edge shapes? There are various devices for this.

    • Nippers. Used to bite off small pieces, corners and semicircles. Leaves an uneven edge that needs to be trimmed with an emery wheel.
    • Diamond string. It is fixed in an ordinary hacksaw for metal, used for curly cut. It cuts only wall tiles and requires a certain skill, since during jerks, chips are formed on the surface.
    • Crowns are used to make round holes in ceramic tiles for sockets and switches.
    • Ballerina. With the help of such a drill, holes of various diameters are made. The size is adjusted manually by changing the distance to the cutter. Up to 20 cuts can be made with one nozzle.

    How to cut ceramic tiles with a manual tile cutter

    The tool allows you to cut strips from 5 mm wide, straight or diagonally.

    It is used to cut durable floor tiles and porcelain stoneware up to 15 mm thick. By design, it is a base, on which the runners of the carriage with a cutting wheel are fixed. It is slightly larger in diameter than in a glass cutter, which makes it possible to achieve a greater notch depth. The minimum size of the wheel is 1.5 cm.It is also removable, it can be replaced after a cycle of work.

    On the base of the manual tile cutter there is a strip of solid material, with the help of which, after the cut, the tile is broken. There is a T-shaped piece in front of the roller on the carriage, which exerts pressure on the two halves of the tile.

    The tile is placed on the base of the tool, having previously marked the break line, clamped tightly., The clamping corners must be metal in order to cut the floor tiles; plastic is enough for the wall. Pull the carriage handle towards themselves, making an incision on the front surface of the tile.

    The incision is made once. After the end of the cut, the handle is pressed and the tile breaks. Edges will also have to be processed if they fall on a corner. If grout is used, then it will hide all defects.

    How to cut ceramic tiles

    When working with tiles, the question arises: what is the best way to cut ceramic tiles? The choice of tool is determined by the amount of work and the properties of the tile itself. There are several ways to cut ceramic tiles.

    How to cut ceramic tiles with a grinder

    New wheels are used for dry cutting, diamond dusting or for work on concrete. The grinder is best used with adjustable speed. At a rotation speed of more than 3.5 thousand rpm, the tile cracks, and the dust content increases significantly.

    With the help of a grinder, you can cut floor tiles, porcelain stoneware and wall tiles. With a certain skill, you can cut circles 70 mm in diameter and make curly cuts.

    The cut is made from the back of the tile, as small chips may remain on the surface. The canvas is placed on a solid and even surface, a line is marked with a marker, a grinder is drawn around it and the part that is longer is broken off. The cut surface can be trimmed with the same grinder.

    How to cut ceramic tiles

    In any case, special tools will be needed for the work. The simplest of them is a glass cutter, a manual tile cutter has a higher performance, for professionals it is recommended to opt for electric tile cutters. When you acquire a certain skill, the tile can be cut with a grinder, and a diamond string is used for the manufacture of art products.