DIY Duck Tap Mannequin
Heat Resistant Masking Tape
Heat-resistant crepe is used for painting work with cars. It remains sticky even when exposed to high temperatures, up to 120 degrees. Wide adhesive tape with heat-resistant properties, after removal, does not leave glue marks on the painted surface.
The tape with an aluminum base coated with an acrylic-based adhesive has the highest heat resistance.
The painting product is divided into types according to the basis for production from:
- polyethylene foam;
According to the number of sticky sides, crepp is subdivided into:
The use of masking tape makes it easier to work with various industrial and commercial facilities. Crepe tape of yellow and brown color is used when working with products made of cardboard or film.
The main condition for a snug fit of the masking tape to the surface is to ensure that it is dry and clean beforehand, all grease and dust must also be removed.
After removing the adhesive tape, there are practically no traces left on the surface. If they do appear, it is enough to treat the contaminated area with detergent.
The adhesive tape for painting work should be removed in time, otherwise the adhesive layer will dry out, which will lead to difficulties in removing it. a technical hairdryer or solvent may be required. Drying time of the glue ranges from several weeks to 1-2 months, depending on the manufacturer.
Crepp with two sides
The tape with two sides is used in construction work, because it is fixed even on uneven and rough wood and metal surfaces. The construction version of the adhesive tape is divided into 3 types:
- PP. with a propylene base, impregnated with a mixture of 2 types of glue.
- PVC. fabric product with the addition of fiberglass.
- Mirror, replacing fastening elements.
Advantages of paper backed products
Paper tapes differ from other types of adhesive tape in several advantages, namely:
- a wide selection of products of various thicknesses and widths;
- light weight;
- versatility at work;
- low price.
Choosing masking tape
Width. The width of the masking tape varies and is designed for certain types of work. The most popular among buyers is narrow tape with a width of 10 mm and 15 mm. For larger-scale works, builders use a tape 50 mm wide.
Thickness. However, width is not the only criterion when choosing an easy-to-work crepe. When purchasing an adhesive product, pay attention to the thickness in microns (μm). A tape with a thickness of 125 microns is considered to be a quality tape at an affordable price. it is durable and with good adhesion.
Brand. Products of branded brands are of the highest quality. They are presented in a wide range of colors. The most proven option is blue masking tape from the manufacturer 3M Company for professional construction and finishing works.
Before making the final decision about which masking tape to choose, you need to clearly determine the scope of its future use.
How to cut masking tape into narrow strips
Masking tape is a special tape on a paper basis, processed with glue with a special rubber composition. Due to these properties, there is practically no glue left after removing from the surface. The scope of its application is quite wide.
Adhesive crepe is assembled in rolls from 10 to 70 meters long in various colors. A photo of masking tape from the catalog will help you understand the main models and varieties.
Brief content of the article:
- Properties of paper tape
- Advantages of paper backed products
- Heat Resistant Masking Tape
- Crepp with two sides
- How is crepp applied
- Application features
- Choosing masking tape
- Removing masking tape
- Polished furniture
- Ceramics, glass, tiles
- Photo of masking tape
In addition to painting works, masking tape is successfully used to solve a wide range of other tasks:
- If suddenly any small parts turned out to be without packaging, they can be glued to a piece of masking tape to avoid loss. Convenient when organizing a temporary workplace.
- With the help of a crepe tape, you can apply markings and make notes, any inscriptions on any basis, including a wall with wallpaper, glass, tiles. This feature is extremely useful both in everyday life and in logistics.
- In order to carefully collect the resulting dust and debris while drilling the wall without using a vacuum cleaner, it is enough to make an envelope out of a sheet of plain paper, and then glue it with crepe tape under the entry point of the drill directly to the wallpaper. By the way, by pasting the drill with tape in a circle at a certain distance from the edge, you can create an impromptu drilling depth limiter.
- Fix the edge of a long tape in a certain place, masking tape is also suitable, with which the measuring cloth is fixedly glued to the measured surface.
- If you want to perform precise drilling of a smooth material, on the surface of which the drill simply slides (glass, tiles), it is enough to stick a crepe tape on it. This will both mark the point of entry of the drill into the material and prevent it from sliding.
Among other things, with masking tape you can seal windows for the winter, safely collect fragments of broken glass.
You can also protect the door leaf with tape during installation by pasting it along with the frame around the perimeter.
Crepp is used when sealing seams and joints with a sealant, which avoids the latter getting onto the adjacent surface.
Radial masking tape
For curved surfaces, creating curly lines with smooth curves.
Has increased elasticity, which avoids breaks of the tape during its transverse bending.
The cost of scotch tape depends not only on its type and manufacturer, but also on the winding.
Depending on the operating conditions and the tasks performed, masking tape is:
Protective paper with masking tape
Protects surfaces, like the previous version, it differs only in a covering material, here it is made of paper.
Here special paper with a density of 40 g / m2 is used.
Common specification of masking tape. paper crepe.
This is a tape made of crepe paper, on the surface of which a layer of adhesive is applied in the form of an adhesive made of natural or synthetic rubber.
The combination of these materials has resulted in the following performance benefits:
- High adhesion to both smooth surfaces and materials with porosity.
- Frost resistance up to 10 ° С, temperature ceiling 60 °. 120 °.
- Resistance to weather conditions, moisture, direct UV rays (not always).
- Relatively high strength, however, low edge tear resistance.
- Resistance to solvents, compatibility with all types of paintwork (also not always).
In addition to paper, creped tapes are made from aluminum foil, polyethylene foam, polypropylene and a multi-colored fabric base.
For solving special problems, the buyer is offered a bitumen tape.
It can have a different basis, from crepe paper to fabric.
It is used as an alternative to glue, as the adhesive layer is applied on both sides of the base material.
There are also varieties in the form of an adhesive strip without a base at all.
For clear lines
There are, in turn, two categories: budget standard and expensive premium.
The last version is super-thin, made on the basis of Japanese paper, the thickness of which can be compared only with tissue paper, designed to create especially precise lines.
, depending on the winding.
It is often used when painting a car body when it is supposed to be hot dried.
Unlike standard krepp, which can withstand temperatures up to 60 degrees, this option is designed for 110. 150 degrees, depending on the specific masking tape and manufacturer.
It should be remembered here that the time of exposure to the maximum temperature is, as a rule, limited to 60 minutes, after which the material loses its strength and adhesive properties.
Why do you need masking tape
You can use masking tape at any stage of repair. it is a versatile and convenient thing, but the main area of application of paper-based tape is wall painting.
Scotch tape performs the following functions:
- Protection. Even those who know how to professionally paint evenly and accurately, always use adhesive tape to close baseboards, door and window slopes, sockets and switches and other elements that cannot be taken out of the room during repairs, but do not want to get stained with paint. It is also convenient for them to attach film, newspapers, but it is better to take double-sided tape. a roll of paper strip, in which both sides are adhesive.
- Delimitation of space. It is convenient to use masking tape to make the border of the surface to be painted, if, for example, two or more colors are used on the wall, or the painting goes back to back to the wallpaper.
- Design creation. Scotch tape allows you to create a different design on the wall: select a border (for this, choose a roll of the required width in mm), draw geometric shapes, paint in stripes. When painting a wall with a complex pattern, where it is easy to get confused in the sequence and general pattern, you can use tape of different colors, make notes with a pen or pencil directly on the tape.
Masking tape is easy to use, it is moderately sticky, comes off well with your hands, it is easy to remove. just pull on one edge.
How to choose the right masking tape
Of all types of construction tape, rolls of white or yellowish color are suitable for painting. They have a paper base that absorbs paint well, but at the same time does not get wet and does not allow excess to drain.
Please note that crepp (scotch tape) must have a rough outer side so that the liquid paint lingers. To protect the skirting boards or areas adjacent to the painted areas, you can take a wide 50 mm tape, the design is convenient for a roll of 10 and 15 mm.
Painting walls with masking tape
Before finishing finishing work, do not forget to purchase masking tape, this is a faithful assistant when painting walls! It protects against paint smudges, helps to smoothly delimit the space, and is convenient when creating decorative elements. Experienced craftsmen from the finishing company give some tips on choosing an adhesive tape and how to use it.
It is important to check the degree of adhesion. apply a small piece of tape to the wall, tear off and re-stick, the tape should even re-adhere tightly to the wall. The smoother it lies, without air bubbles and wrinkles, the better.
- Do not buy masking tape for future use and do not store it in rooms with too low or high temperatures, with high humidity. it loses its declared characteristics;
- Before using, try to glue and remove the scotch tape, practice, understand with which step it will be more convenient for you to work, whether the strip of paper should lie flat, whether it removes some of the whitewash or paint when tearing off;
- Do not remove the tape until the paint is completely dry to avoid smudges, smudging.
Heat Saving Film
Another tool designed to eliminate gaps between glass and frame. A special film reflects heat, directing it back into the room. The only negative is high per square meter, a thermal-saving film is sold in rolls of 1.5×30 m.
As in the previous case, between the sashes, under the window, it can blow, if these places are not pasted over. However, this is no longer done with film, but with another material: paper, cloth, tape.
Those who are not satisfied with the paper and soap option can be advised to pay attention to masking tape. An adhesive composition is applied to one side, which greatly facilitates the task of insulation. No need to cook the paste or grease the strips with soap. the tape can be immediately glued to the frame, after cleaning the surface from dirt.
The disadvantage of pasting is the difficulty of removing the adhesive tape, because the adhesive tape during the winter period firmly adheres to the paint, and then breaks off in pieces. If the “grandmother’s” method of protection against drafts does not require money, then you will have to spend money on masking tape.
Note! Do not try to abruptly rip off the tape. it will come off along with the paint. You need to heat the tape with a hairdryer and pull, and sticky spots from it can be easily removed with gasoline and white spirit.
Other methods of insulation
In cases where the windows are heavily blown, there are large crevices in the wood or cracks in the glass, it is recommended to restore them. For this, the glass is taken out, the old paint is removed, the frames are washed, dried and painted again or covered with protective impregnations. It is necessary to paint wooden sashes before installing the glasses, paying attention to all places. Cracked glass should be replaced with new ones, and the joints to the frame should be sealed with a sealant. It is worth choosing the right way to cover the windows, since the composition of the product should contain rubber or alkyd resins.
A deteriorated insulation on the outside of the window is a common cause of a draft. It is not necessary to do everything thoroughly, as there is a high risk of damage to the frame. It is better to eliminate the gaps with low expansion polyurethane foam. Slots are often located under the ebb, on the sides or top. Slopes can be a way out of the situation. After the foam has hardened, cut off the excess and paint over to seal it. If done correctly, insulated wooden windows will last for several more years.
The last way is to tighten the windows from the outside with transparent film. Yes, it’s not very pretty, but it’s warm. This is often done in houses where the windows overlook the courtyard. Dense polyethylene is pulled and fastened from the street with planks. The formed layer of air between the street and the glass will prevent cold air from entering the room.
Paper and soap
The most popular “grandmother’s” way that everyone is familiar with. It is enough to cut long strips of paper and then stick them on the frames using soap. Previously, it was replaced with a paste made of flour or starch, since I did not want to spend money on a soap solution. How to glue paper on windows:
- put laundry soap in hot water and leave until softened;
- liberally lubricate the strips with the soaked part;
- glue paper over wooden frames in the area of joints.
After drying, the paper becomes dense, almost does not allow cold air to pass through. The main plus is that the strips are easily peeled off in the spring; after washing with warm water, no traces remain on the paint. However, in winter, the paper can also come off, especially if condensation forms on the glass.
You can replace the paper with strips of cotton fabric. It is advisable to grate the soap and dissolve it in a little water to make a good solution. You need to dip the cut pieces into it and glue it. Make sure that the material is well moistened with the product.
If you notice a drop in indoor temperature, it is worth inspecting the windows. In most cases, it is through the gaps between the glass and the frame that cold air enters the sashes. Pasting or insulating windows for the winter begins with preparation. Before starting work, you need to thoroughly wash and dry the frames in the sun. When using adhesive tape, degrease the surface.
There are modern methods and one of them is the sealant. It is necessary if cracks have formed at the place where the glass adjoins the tree. Be sure to wash the windows before starting work, dry them well and degrease them. The tube is inserted into the pistol and the nose is cut off along the mowing line. It is necessary to coat it carefully, controlling the pressure, otherwise the sealed seam will be ugly. Thanks to the thin spout, the putty is easy to apply even to hard-to-reach places. Despite the relatively high (when compared with other methods), the sealant has many advantages, the main one is that the material is quickly applied and hardens.
In addition, you need to spend money on a sealant gun. The material does not eliminate drafts in the frame area, so you should remember how to glue the windows in this area.
Note! The sealant hardens “tightly”, you need to work slowly. It is recommended to immediately wash off the material that has fallen on the windowsill using a cloth soaked in gasoline. It is better not to rub stained glass with a cloth, but to remove the sealant with a knife after hardening.
An effective and cheap method that protects against drafts for at least one year. With careful use, the service life can be extended up to two years. The rubber seal with the sticky side is glued to the inside of the sashes. It does not interfere with closing due to the fact that it is hollow. There are several disadvantages:
- laboriousness and the need to prepare the frame correctly (degrease);
- per roll);
- high risk of peeling off in case of violation of technology.
A high-quality sealant does not spoil the aesthetic appearance of the window, it serves for a long time, and allows you to ventilate the room. It is necessary to study the instructions before use so that the material does not come off.
Review of the best products for wooden frames
There are many ways to protect against cold weather: using plain paper and soap, fabric, cotton wool, foam rubber, sealant and special seals. It all depends on the desires and capabilities, but even expensive funds do not guarantee 100% result. Better to use proven and affordable methods.
White spirit and gasoline
Gasoline or white spirit is sometimes used to clean up traces of scotch tape. The main thing is that they are free of various impurities. These substances quickly dissolve the glue and effectively remove it, but they are very dangerous in terms of damaging the surface, so you need to be very careful when applying them. It is better to try on some test piece of material, otherwise you can ruin the product. If after 10 minutes the color and shape of the material has not changed, then the work can be carried out.
This method is dangerous in that there is a great chance to put a greasy stain, which is much more difficult to remove than the remains of masking tape. But nevertheless, despite this, painters resort to this method. Any vegetable oil (sunflower, olive, and any other) will do. Soak a scotch tape in oil, wait 15 minutes. Then start peeling off the tape. Traces are easily erased with a sponge. After that, you need to rinse the surface with soap and water.
Removal with soda
Another safe method is to prepare a composition to remove traces of masking tape with your own hands. You can use ordinary baking soda for this purpose, dilute it with water to get a creamy mass. Now apply on tape marks, wait about 2-3 minutes. The composition is removed with a cloth soaked in water. Repeat the procedure if necessary.
You can remove traces of masking tape using detergents that do not contain aggressive substances. Choose them in the form of a gel, liquid or powder (large crystals can scratch your surface and spoil the appearance).
Soak the sponge in the detergent and wipe the places where the tape was, increasing the pressure in the direct accumulations of glue. Even a window spray is suitable for this purpose. Just spray it on the marks, wait 5-10 minutes and wipe it off with a sponge. After that, you need to rinse everything with clean water.
Here you will need a dishwashing sponge, soap, and water. The rougher side of the sponge needs to be lathered and start wiping the desired area so that it is all in a soapy solution. Wait about 5 minutes. Then you will have to intensively wipe off the marks for quite a long time. This method does not require any additional funds, because you have all this at home, but you will have to spend a lot of effort and patience.
Removal with a hair dryer
If the product to be painted is made of a material that is resistant to high temperatures, then you can remove traces of the adhesive tape with an ordinary hair dryer or steamer. It is enough to heat only the end of the tape, and then pull on it, and it all comes off easily. Remaining glue should not be overheated; after a slight increase in temperature, they can be easily removed with a damp cloth.
A faster option is to operate by ferry. Sometimes it is enough just to breathe for a long time, and then wipe off the marks.
Removing with another tape
If you did not waste time in vain and after you removed the tape, you immediately decided to remove all traces, then you can do it with the help of another tape. The main thing is that the remnants of the glue do not have time to harden completely. This method is best used when working with plastic products.
Stick the tape on the place where the marks remain, press well. Then, with a quick movement, you need to tear it off. Repeat several times to achieve the desired result. The advantage of this method over others is that it is completely impossible to scratch or somehow damage the product.