How to dilute oil with gasoline for grass trimmer

How much oil to pour into the grass trimmer per liter of gasoline

Gasoline mowers are fairly common tools used by garden and homestead owners for mowing grass and making hay. common names for tools are the terms “grass trimmer” and “lawn mower”. The main difference lies in the design of the motor. the expensive segment of the devices is equipped with four-stroke models, and the cheap. two-stroke. The latter option has advantages, including low weight and usability, as well as low cost.

The most important condition for the work of two-stroke models is the preparation of the fuel mixture, based on the manufacturer’s defined proportion of gasoline and oil. Simplified motor design does not provide a separate channel for lubrication, so engine oil is added directly to gasoline. Failure to maintain the correct proportions can significantly reduce tool life and even lead to tool breakdown. Let’s understand what composition is required for gasoline trimmers, how to properly prepare the mixture and what it can affect.

The choice of gasoline for grass trimmer

For some reason everyone prefers to choose their own brand of gasoline for brushcutters. This is an erroneous approach, because, first of all, you need to carefully study the manual, where the manufacturer’s recommendations on the choice of fuel type are given. But this is also not a guarantee, because unleaded fuel may be sold under different brands (which differ in many manufacturers), with significantly different composition. Therefore, it is necessary to be guided by the main characteristics to choose gasoline for a particular model of trimmer for grass.

Petrol tool manufacturers recommend using gasoline brand AI-92, but the more expensive types will need fuel with a higher octane number. AI-95. Any brand, which marking contains the figure of 90 or less, not suitable for benzosokos because lead to rapid wear and tear. The problem is due to unscrupulous fuel producers who sell a completely different brand under the guise of 92. The following situation is formed:

• In the passport of gasoline equipment there is a recommendation to use gasoline with an octane number not lower than 92;
• The conscientious owner goes to the gas station, where the lowest price and with a clear conscience pours such fuel in the brushcutter;
• As a result, the service life is reduced, because often under the guise of AI-92 sold AI-80 and AI-76.

To avoid this situation, you need to choose one filling station, where it sells proven gasoline (this can be determined by the reviews of regular customers). It is also important where to fill the fuel after purchase. only metal containers should be used for this (plastic. forbidden).

Preferably, when it is possible to buy gasoline for grass trimmer high purity specifically for garden equipment. Then you can be sure of its quality and protection from counterfeit.

Petrol

The basic component of the fuel mixture for chain saw engines is gasoline with an octane rating of at least 92. Consumable material with expired storage, made on the basis of gas condensate, which has in its volume water and mechanical impurities is not suitable for the preparation of fuel.

• Opinions of experts on the use of gasoline of different brands are mixed. On the one hand, it is recognized that domestic gasoline A-92 does not fully comply with European standards.
• On the other hand. questioned the quality of gasoline A-95 because of the large content of anti-detonation additives. To use this fuel for cooking gasoline for a chainsaw is possible only if you are absolutely sure of its quality.
• The problem is in availability of different improving additives, which help unscrupulous manufacturers and sellers improve operational properties of automobile gasoline with a lower octane rating.

There are also irreversible changes in the working properties of fuel when stored for a long enough time in a plastic container, regardless of its level of gasoline and oil resistance.

What are the chainsaw’s features?

If you have a cottage or a house in the countryside, you need a chainsaw. For gardening, a household chainsaw is quite sufficient. Its power is small, but it is enough to remove old tree branches, cut firewood and boards. Not much weight or size for a compact saw. If you need to cut down trees in your yard or are planning construction work, it’s better to buy a semi-professional chainsaw. It should not work for more than 8 hours a day. Professional chainsaws are high-powered and can work up to 16 hours straight. They are made of high-strength materials and use requires a certain amount of skill. Professional chainsaws are used for felling on an industrial scale and for other similar work.

All of these saws differ in both power and weight. If you don’t plan on doing a lot of work all the time, it’s better to use a home chain saw, which weighs much less and is therefore easier to handle. Professional saws, on the other hand, have up to 6 kW power and therefore weigh more. Which chainsaw is right for you depends on the thickness and toughness of the material you’re cutting.

What’s the best oil for boat engines.

Also note that if these oils can not be used to make gasoline mixture for boat engines. 2T model motors shall be filled with mix of gasoline with octane number not less than 89 and high-purity oil with detergent additives NMMATC-W3 in proportion of 1:50 for work mode and 1:25 for break-in mode. 1:25 for running-in mode (first 5-10 engine hours). Choosing the right oil.the basis of engine operation, so each manufacturer recommends pouring certain brands of oil into the technique, thereby guaranteeing the longest service life of the product. So for boat engines (both 2t and 4t) tohatus service center recommends to use german motul or american quicksilver oils. For mercury boat motors it is necessary to use only quicksilver motor oil. The most preferable brands for Honda motorboats are motul and statoil.

Useful tip

It is not recommended to use the fuel mixture if more than two months have passed since preparation.

How to mix oil and gasoline for a two-stroke engine

The peculiarity of two-stroke engines is that the fuel is filled into the tank along with the oil. Each refueling requires the fuel mixture to be prepared in the correct proportions before operating the machine. How to do it right? From our article you will learn how to dilute gasoline for chainsaws, grass trimmers and other garden tools.

It is recommended to buy unleaded gasoline to run your garden equipment. Otherwise there is a risk of engine failure. The manufacturers advise to use fuel with an octane number not lower than АI-90, better than АI-92 or АI-95. See manual for specific recommendations for your tool. At the gas station, pour the correct amount of fuel into the canister. Preferably a metal one: no static electricity generates in the tank, so it is safer to use.

Buy brand name oils for two-stroke engines, preferably API-TB or API-TC. The manufacturer should indicate the recommended grades in the tool’s instruction manual. Also note their composition. Mineral oils are suitable for use in warm weather. Synthetic is better, they are less viscous and can be used even in freezing temperatures. Semi-synthetic are mineral with improved qualities, universal for any season. See the temperature rating on the package for the operating temperature limit. Also note volume. It is not the proportion of gasoline and chain saw oil that is important, but the amount of fuel mixture you will need for one filling and how often you will work with the tool. If you have a grass trimmer or chain saw in your arsenal and you use one or the other tool several times a week, it makes sense to buy a big 3 to 5 liter canister of oil. For several mowing operations during the gardening season a 1 liter bottle is enough.

Mixing oil with gasoline

When you start working with a tool, the question is always how much oil to add to gasoline for a chainsaw or grass trimmer. It’s important to remember that for two-stroke engines the ratio is 1:50.е. 100 ml of oil for every 5 liters of fuel. Why it is important to follow the proportions? Excess oil contributes to soot deposits on pistons and spark plugs, and lack of oil impairs the lubricating properties of the fuel mixture, which leads to scuffing of the piston group and increases the risk of engine failure.

The easiest way to follow the proportions of gasoline and chain saw oil is to use measuring containers. There is a scale and grades on these things which are easy to read. Before filling up with gasoline and oil make sure that the container is clean. Do not put any water or dirt in the mix: this could affect the quality of the fuel mixture. First pour petrol to the proper level, then add oil, also to the proper level. To mix them, tilt the container several times. The liquids will quickly mix and the mixture will take on a uniform color, such as green or red (depending on the composition of the oil).

Important to know! Never use plastic drink bottles for storing and mixing fuel mixture. Gasoline corrodes plastic. Gasoline corrodes plastic, and even if the walls of the bottle look intact, harmful components can enter the fuel mixture and into the engine. It is very unhealthy for the carburetor.

Wearing gloves is recommended to protect hands from gasoline and oil. Also do not forget the basic rules of fire safety. Mix the liquids outdoors so that gasoline vapors do not accumulate indoors. Do not smoke while working and avoid other factors that can ignite fuel and lubricants.

Pour the fuel mixture into the tank and close the cap tightly. If you have blended more than you can use at one time, empty it into a separate canister for storage or leave it in the blending tank. The main thing is to close the lid tightly. The ready-to-use mixture can be stored for up to two weeks and can be used for refuelling without any risk for the engine. The only condition is that it must not be left in the fuel tank. If the tool will not be used for a long time. use up the leftovers completely or drain.

Now you know how to dilute gasoline for a chainsaw so as not to harm the engine. Try to do this yourself. After you prepare the fuel mixture several times, it will be clear how many components are needed so there is no excess mixture. You can buy everything you need in our online store. Proprietary oils give your tool a long life.

How to mix oil with gasoline for a two-stroke engine

The peculiarity of two-stroke engines is that fuel is filled into the tank together with oil. Before operating the equipment, every fueling requires the fuel mixture to be prepared in the correct proportions. How to do it right? From our article you will learn how to dilute gasoline for chainsaws, grass trimmers and other garden tools.

For the operation of garden equipment is recommended to buy unleaded gasoline. Otherwise there is a risk of engine failure. Gasoline manufacturer recommends a fuel octane rating of AI-90 or higher, preferably AI-92 or AI-95. See manual for individual recommendations for your tool. Fill the canister with the quantity of fuel you need at the gas station. It is desirable to use a metal container: in such a container does not create static electricity from friction, which increases the safety of use.

Buy brand name oils for two-stroke engines, preferably API-TB or API-TC grade. The manufacturer should indicate the recommended brands in the instructions to the tool. Also consider their composition. Mineral oils are suitable for use in warm weather. Synthetics are better, they are less viscous and can be used even in freezing temperatures. Semi-synthetic. these are mineral oils with improved qualities, universal for any season. For temperature limits on operation, see the package. Also note the volume. It is not the proportion of gasoline and chain saw oil that is important, but how much fuel mixture you need for one filling and how often you will work with the tool. If in your arsenal in addition to the saw you also have a grass trimmer or chain saw, and you use one or the other tool several times a week, it makes sense to buy a large canister of oil with a volume of 3. 5 liters. For several mowing operations during the season, a 1 liter bottle is enough.

Mixing oil with petrol

At the beginning of work with the tool there is always the question of how much oil to add to gasoline for a chainsaw or grass trimmer. It is important to remember that for two-stroke engines the ratio is 1:50, t.е. There are 100 ml of oil per 5 litres of fuel. Why it is important to maintain the proportions? The engine oil proportion is very important: too much oil creates carbon deposits on pistons and spark plugs, and too little oil reduces the lubricating power of the fuel mixture, which leads to burrs in the piston group and increases the risk of engine damage.

The easiest way to keep gasoline and oil proportions for a chainsaw is to use measuring containers. They have a scale and marks on them so you can easily find your way around. Before pouring in the gasoline and oil, be sure the can is clean. avoid getting any water or dirt in it: it can affect the quality of the fuel mixture. First fill petrol to the proper level, then add oil to the proper level. To mix the two, tilt the container several times. The fluids will quickly mix and the mixture will get a uniform color, for example green or red (depending on the oil composition).

Important to know! Never use plastic drink bottles for storing and mixing fuel mixture. Gasoline corrodes plastics. And even if the walls of the bottle seem to be intact, harmful components still get into the fuel mixture and into the engine with it. It is very bad for the carburetor.

Wearing gloves is recommended to protect your hands from the gasoline and oil. Also remember elementary fire safety rules. Mix liquids outdoors so gasoline vapors do not accumulate indoors. Do not smoke while working and exclude other factors that can cause inflammation of combustible and lubricating materials.

Pour the prepared fuel mixture into the fuel tank and close the cap tightly. If you have blended more than you can use at one time, empty it into a separate canister for storage or leave it in the blending tank. The main thing is to close the cap tightly. The fuel mix can be stored for up to two weeks and can be used for refueling without any risk for the engine. The only condition is that you don’t leave it in the fuel tank. If the tool will not be used for a long time. use up the leftovers completely or drain them.

Now you know how to dilute gasoline for a chainsaw so as not to harm the engine. Try and do it yourself. After you have prepared the fuel mixture several times, it will be clear how many components are needed so that there is no excess mixture. You can buy everything you need in our online store. With brand-name oils, your tool will last a long time.

Oil for brushcutters. how to choose and in what proportions to dilute it

Many of you have in the household gasoline tool, for example, in a private home can not do without a chainsaw. You know, making firewood for the winter, it comes in handy for construction and repair, and generally, it is a very useful tool. If your country house also has a decent-sized plot, then the grass trimmer or lawn mower is just necessary to fight the grass, which also work on gasoline.

Of course you can buy electric as well, but not everyone likes to pull a 30 m extension cord to mow a knee-deep patch of grass. That’s why most people prefer to work with gasoline tools. As you know, you need to add a special oil for two-stroke engines to petrol. Here we will talk about it, because this is a very important aspect, if you do not add oil and add in the wrong proportions, then your engine very quickly “kreaknut” and your way will lie in the service center. To avoid all these troubles, add only high-quality oil and in the correct proportions.

The most popular for chainsaws, brush cutters and trimmers are the products of the famous company STIHL. It is sold in 2 packages. 1 liter and 100 ml. For those who work a lot, a liter bottle will be enough, and a small bottle will be quite enough for “one-time sawing”. A 1 liter costs 250, a 10 ml costs 60. If you take the large bottle, the savings are obvious.

You add oil to petrol in proportion of 1 to 50, so for example 100 ml for 5 liters of petrol. As you can see, a small bottle is perfect for getting 5 liters of gasoline mixture to fill a chainsaw or grass trimmer. The big bottle has marks on the side so you can see how much oil you have. If you buy a large 1 liter bottle, buy a 20 ml syringe from your local drugstore. Very convenient. 1 syringe of oil for 1 liter of petrol.

The experts recommend you use original STIHL oil. it’s perfect for your machine because it has been tested on STIHL power tools. I note that Stihl has its own brands, such as VIKING (popular models of gasoline trimmers). Use Stihl oil for those as well and you won’t have any problems at all.

If you’ve got more gasoline mixture than you can use up, then it’s best to store the leftovers in a metal canister or glass container. Never store the mixture in a plastic bottle. Of course, if you use up the rest in a couple of days, you can pour the rest of the mixture into a plastic bottle, but if the mixture will be stored for a long time, then either a canister or a glass bottle. The fact is that the gasoline mixture corrodes the plastic bottle, there are microscopic precipitations of plastic in the mixture and this is very bad for the engine. Keep this in mind if you want your tool to work long and without problems.

The second most popular oil brand is the notorious Hooksvarna. Of course, if you put it this way, still more people use chain saws STIHL, at least all my friends and their friends use in their work only their.

But there are those who cherish Husqvarna tools and I understand them, because I personally do not see much difference between Husqvarna and Stihl, both tools are of very high quality. But I’ve seen some happy Husqvarna chain saw owners. they say the saws are great. I have not sawed myself, however, to the opinion of people always listen. So, if you have a Husqvarna gasoline tool, it would be better to use a special brand oil for it. Although nothing bad will happen if you dilute the gasoline with a Stihl. But since the manufacturer recommends using only its products, so we do so.

On sale you can find a liter capacity. The bottle is black, stylish, it has the same markings on the side as Stihl’s (to know how much oil has been poured out of the bottle). To me it’s exactly the same quality. It costs 270, a little bit more.

Both types of oil are of high quality, the cost is about the same, each diluted in the proportion of 1 to 50. So feel free to buy any oil, of course, it is better to take the oil of the brand that you have a tool. then everything will be perfect, just as the manufacturer advises. Good luck with sawing, mowing the grass and let your power tool work for a long time without failures.

On a side note: The submersible pump “Aquarius 3”. my review.

Types of motor oils and their function

Choosing the oil for your gasoline trimmer

Engine oil for gasoline grass trimmer is a lubricant that serves to reduce wear and tear between the rubbing parts of the engine.

The oil composition includes residual hydrocarbons and various additives that improve the properties of the final product. To ensure the long and trouble-free operation of your lawnmower, experts recommend using oils, which by their physical and chemical properties correspond to this type of motor.

Today it is customary to distinguish between three main types of oil according to the way they are produced:

• Mineral, created in the process of distillation of hydrocarbons;
• Synthetic oils obtained through natural gas processing or synthesis;
• Semi-synthetic, which includes an improved mineral oil with the addition of some synthetic components.

In order to prevent mixing of the different types, the manufacturer adds a dye to the oils, which shows the difference in the composition of the lubricant.

Types of motor oils and their purpose

Choice of oil for a gasoline trimmer

Engine oil for gasoline grass trimmer is a lubricant that serves to reduce wear and tear between the rubbing parts of the engine.

The composition of the oil includes residual hydrocarbons and various additives that improve the properties of the final product. To ensure the long and trouble-free operation of the lawnmower, experts recommend the use of oils that match the physical and chemical properties of this type of motor.

Today we distinguish between three basic types of oils according to the way they are made:

• Mineral, created by the distillation of hydrocarbons;
• Synthetic oils obtained by processing natural gas or by synthesis;
• Semi-synthetic, which includes an improved mineral oil with the addition of some synthetic components.

In order to prevent mixing of different types, the manufacturer adds a dye to the oils, which shows the difference in the composition of the lubricant.

Husqvarna oils

Lubricants increase the life of the engine and indirect parts, ensures long, trouble-free operation.

Husqvarna multigrade oil. one of the best for garden and construction equipment. Protects the engine immediately at startup and immediately lubricates faraway components. Characterized by soft texture, anti-corrosive properties, works in a wide temperature range and at high speeds.

Husqvarna oils have the following advantages

• Suitable for use with low-quality gasoline;
• Husqvarna oils help to save fuel;
• The thick film of oil protects the engine from wear and corrosion;
• reduce fouling of pistons and cylinders;
• Due to its high viscosity the oil gets to the working parts easily;
• special additives prevent deposits on crankcase;
• Reduced maintenance costs;
• low volatility, resistant to oxidation processes;
• environmentally friendly and biodegradable components.

Engine oils for 2 and 4 stroke engines

• snow blowers;
• chainsaws and chain saws;
• lawnmowers;
• trimmers;
• blowers;
• power tillers;
• garden tractors, etc.

Summer oils and multipurpose oils for year-round use are available.

Husqvarna HP 2-stroke oil 1 liter API SG. the best selling oil in Russia. Its advanced formula is adapted to work in harsh latitudes of Russia with low-quality gasoline. Synthetic additives protect the engine from wear, deposits and corrosion, suitable for all 2-stroke engines.

Please note! How to distinguish Husqvarna oil from counterfeit:

• HP two-stroke oil is available in 1 liter only, price from 799 p.
• The top of the bottle is laser engraved in black or yellow.
• On the side, there is an oil level indicator stripe with notches at 100 ml.
• The date of manufacture includes not only the day-month-year, but also the time of manufacture.
• Instructions on the back fully in Russian. There is information on certification, precautions, storage conditions, factory and importer in
• In addition to the logo and barcode there is part number # 5878085-12.
• “Made in Sweden” label, no other official manufacturer.
• Dial on the bottom of the bottle: the year is indicated in the center of the circle and an arrow points to the month.
• Test ring to open, the lid has the H (Husqvarna) logo engraved on it, and there is a protective aluminum foil underneath.

Husqvarna chain oils

To prevent wear, a special low-viscosity oil is used to lubricate the chain and protect the saw bar. Effective in cold and wet conditions. At the same time it can be easily washed off with soap and detergents.

Air Filter Oil

Impregnates the filter and collects dust particles before they reach the engine, thereby increasing engine life and durability. Removes with soap, biodegradable.

See the complete engine oil catalog in our dedicated Husqvarna store.

• Free same day delivery in Moscow.
• Self-delivery.year. Moscow, metro station Tulskaya, ul. Pavlovskaya 27/29.
• Send by transport company to any region

To buy Husqvarna oil place your order online or call us if you want to consult with an expert.

Features of brushcutters refilling

In order for the mixture to be properly distributed in the unit’s fuel system, simple instructions must be followed. How to correctly fill the gasoline trimmer for grass:

• Hold the brushcutter horizontally with the filler neck up and pour in the correct amount of fuel;
• Do not fill the grass trimmer too much. watch how much fuel is at the top mark;
• Do not spill fuel on the ground or tool housing;
• Before starting the engine, keep a safe distance from the fuel containers;
• If there was old fuel in the tank, it is necessary to completely empty the gas tank before refueling with new fuel.

Filling your brushcutter with a two-stroke engine

For gasoline-powered trimmers of this type, it is necessary to follow the instruction already described. It is necessary to maintain a strict oil ratio and not to spill on the body of the tool. Check that the fuel tank is not overfilled, otherwise the engine may become unstable.

Filling the brushcutter with a four-stroke engine

The main difference is that grass trimmers with this type of engine are not filled with a mixture of oil. It is necessary to fill separately Ai-92 and engine oil. General rules for filling the tank are similar to those already described above.

What oil to choose to fill the grass trimmer or types of lubricants

Grass trimmers and lawnmowers are powered by two-stroke engines, which have a simplified design. Rarely, but there are trimmer models with 4-stroke motors that run on pure gasoline. Power units of two-stroke type do not have a compartment for pouring engine oil (oil sump), due to which the weight of the tool decreases and their cost decreases. If the rotating parts of the motor will not be lubricated, then as a result they will quickly fail. To prevent this, the grass trimmer is not filled with pure gasoline, but with a mixture of oil. What oil to dilute with gasoline for grass trimmer?

To begin with, let’s remember or find out what types of oils by chemical composition are available:

• Mineral fluids. designed for low-power machinery with air cooling. This is the cheapest type of lubricant for motors
• Semi-synthetics. they are used for equipment that has air and water cooling
• Synthetic. suitable for all types of engines with different types of cooling. They do not require frequent replacement, and this type of lubricant is several times more expensive than mineral and semi-synthetic

From the above it follows that the grass trimmer oil is suitable for any composition. mineral, synthetic and semi-synthetic. Oils with different chemical composition differs in price, so it is necessary to rely on the recommendations of the tool manufacturer when buying. The instructions include advisory information on which types of oils are best to use. If it is a TC-W3 standard, then it is not so important what composition the substance should have. In this case you can dilute mineral, semi-synthetic and synthetic with gasoline.

That’s interesting!The main thing when choosing oil is not to get caught on the counterfeit, because now very often you can meet different types of lubricating compositions for two-stroke engines, which consist mainly of low-quality petroleum products.