How to fix the circular saw to the table

How to set up a circular saw on a table

The circular saw is considered a universal tool. Always useful in the home workshop and on the industrial site. You can build a table for it at home and install it on it. But you need to know how to put a circular saw into the table.

Selection of necessary material and technology of table manufacturing

To make a circular saw table out of plywood, it must be treated with special products.

As a working surface, we recommend to choose Finnish plywood as the best option. There are a number of good reasons for that. Material is laminated, which ensures good sliding of blanks on the table’s working surface. In addition, the thickness of the material can withstand quite high weight. These boards are moisture-resistant and at the same time have all the properties of wood and are quite easy to handle, which is very important.

For the manufacture of the table you can even use a simple plywood thickness of 20 mm, but then it must be further treated with special compounds or later cover the table with a sheet of textolite or steel.

When processing wood one of the most popular tools is a circular saw. This device, which is notable for its productivity and convenience, allows you to significantly speed up the process of sawing molded strips or sheet materials. If you are working on a large volume of materials, it makes sense to consider a special, stationary construction with the saw, which improves the safety, speed, and quality of the work.

Circular saw table with your own hands. drawings

Which circular saw to choose

Long kerfs, e.g. when chopping boards into lumber or trimming boards, require long periods of work under considerable strain. Only quality circular saws are able to operate for a long time in this mode.

The same is true when working in stationary mode. When the circular saw is turned upside down with the saw blade and secured in the table, it turns on and runs for extended periods of time. This actively wears out the graphite brushes and erodes the rotor contacts and gears.

Optimal power. from 1.2 kW to 2.2 kW. There are large models with power up to 5.5 kW. But they are expensive and consume a lot of energy, their power may be excessive.

What circular saw to choose for installation

Long kerfs, for example, when splitting planks into lumber or trimming reviews require prolonged work under considerable load. Only quality circular saws can serve for a long time in such regime.

It is the same at work in stationary mode. When the circular saw is turned upside down with the saw blade and secured in the table, it turns on and runs for a long time. During this process the graphite brushes actively wear down, the contacts of the rotor and gears of the transmission mechanism wear down.

Optimal power. from 1,2 kW to 2,2 kW. Large models up to 5.5 kW. But they are expensive and consume a lot of energy, their power can be excessive.

Description of the product to be made

Trimming table is a horizontal base plate on which surface the cutting element is placed and fixed. This construction is usually made of metal profiles, strong plastic, and sturdy wooden boards. Together, these materials ensure a strong, stable position for the cutting element and the ease of use of the saw, especially when working on long materials.

Based on the length of pipes or boards that you plan to saw, you need to make a table of a certain size. Therefore, for comfortable sawing such a tool is often made sliding, however, you can also settle on a permanent model.

A detailed description of making a table for a circular saw with their own hands, which will come in handy in any workshop

Circular saw is a convenient and productive tool, which is present in the workshop of every real man. If you work with lumber in large volumes, you will need to make a table for the circular saw.

Of course, you can make an individual order in a furniture company. But to construct such a table can also be made by oneself, having the necessary drawings, materials and tools.

Features

The design of the table consists of only two elements:

If desired, the masters can complement the product:

Such a piece of furniture must be sufficiently strong and reliable. Keep in mind, the greater the power of the saw, the higher will be the load on the surface of the table.

To the advantages of a homemade table for the circular saw can also be added:

• Comfort and convenience in the work;
• Saving money;
• high labor productivity;
• the ability to make a product based on personal needs and the characteristics of the workshop.

Material

You can make a circulating table with your own hands from different materials. The most common are considered:

Each individual option has its own advantages. Laminated chipboard, plywood and fiberboard are easy and simple to work with. In addition, these lumber products have an affordable cost. But products made of wood, have higher strength and technical characteristics.

Drawing and dimensions

Before you start working, it is recommended to make a drawing of the product. On it, write all dimensions, materials of construction, and other important information. Make a high-quality drawing of any furniture item can be made with the help of special computer programs.

Making a drawing of the table, be sure to take into account the size of the circular saw. Each brand of tool will have a certain size.

If you like to leave materials on the table during the work process, then the size of the tabletop should be at least 120 by 120 cm.

Tools

To make a practical and comfortable table, you will need different tools and materials:

• Lumber (plywood, Laminated chipboard, fiberboard, and others);
• boards for the legs;
• furniture glue;
• paint materials;
• self-tapping screws;
• drill;
• milling machine;
• electric jigsaw;
• circular saw;
• ruler and pencil.

How to make a table for a manual circular saw?

Making and assembling a table for a circular saw is divided into certain steps:

First we make the worktop. Thick plywood is a good choice for this application. It is from this we saw out a workpiece with a jigsaw of the required size.

Finishing

After manufacturing and assembling the circular table, to simplify the working moments, it is desirable to make a marking on the table. It is it that will facilitate the sawing of materials.

To prolong the life of the product and enhance its aesthetics, the table made by your own hands can be primed and varnished. These manipulations will also prevent the lumber from sliding on the surface and protect the product from increased moisture.

Safety in use

Note that working with a circular saw is a dangerous business. To reduce the risk of injuries, it is important to continuously monitor the circular saw table’s position, firmness and stability.

Every time you start up the machine, always make sure it is securely fastened in place.

To avoid bouncing particles of wood in the eyes, it is recommended to work with protective goggles.

Depending on what materials you used, and how you decided the issue of finishing, you can get something like this:

Useful video

For a detailed description of the manufacturing process, see the following

It is worth noting that to make a table for the circular saw with their own hands is not so difficult. And its presence, will greatly simplify and even expand the functionality of the use of the circular saw.

Mini circular saw with your own hands

For sawing parts of small size, you can make a mini-machine without a table.

An old drill can be used as the electric drive for the sawing mechanism. A special shaft for insertion into the drill chuck will have to be ordered from a turner. The toothed disk and 2 bearings should be firmly mounted on it.

The frame for mounting the shaft is made of two parallel pieces of hardwood board with holes for pressed bearings. The working surface can be made of cellulite or plexiglass. The drill and the frame of the device are fixed to a board 30-40 mm thick.

The tool, set upside down with the handle, must be securely clamped to the base in the cylindrical part of the body near the chuck. The board, which serves as the base of the mini-circular saw, is clamped to the usual table with screw clamps. The body of the inverted drill and the base plate must be at the same level.

The guide bar for the mini-circular saw can be made from a bar 50×50 mm.

At one end, it is rigidly clamped to a stop that is cut from a board. It must rest against the face of the work surface. A threaded rod is fastened to the other end of the guide rail.

The second stop element (block) is put on it through the hole drilled in it. The stops are tightened by tightening the wing nut on the stud. Guide limiter is set at the required distance from the disc and fixed by the type of clamping.

At your discretion, you can improve the homemade circular saw in a simple design by installing additional elements and using other materials. You can improve the functionality of the machine by equipping it with a material feed carriage, changing the attachment of the working mechanism, installing other additional devices to control the saw.

Availability in a household of the necessary minimum tools for uncomplicated jobs justifies the need to have a small box with the simplest tools.

But when there is a need to make simple repairs or realize a long-held dream of a small hobby, that’s when the need arises to buy or self-made simple, but very necessary carpentry tool. a stationary circular saw.

The practical application of this kind of tools goes different ways with different masters, in one thing all agree unequivocally, is that such a machine tool is simply a must in the park home tool.

In practical terms, a stationary circular saw is necessary:

• For longitudinal dissolution of wood; for trimming the edges of unedged boards to get even sides; for identical-sized strips, slats, boards; for sampling parts of boards (quarter) to create a tight connection boards in the board.In purely economic terms, the circular saw, is simply necessary for cutting firewood from woodworking waste.

However, in the case to the question of equipping the machine to approach creatively and with a little more effort, the result can be a machine with a whole set of universal functions:

Preparation of materials

If you decide to make a table for a circular saw with your own hands, then first you need to take care of the availability of some materials and tools, among them should be highlighted:

If you decide to engage in the manufacture of the table itself, you must have the skills of cutting wood. As for the plywood, its thickness should be 20 mm or more

Looking for a board, you should pay attention to the one with dimensions equal to 50 x 100 mm. But a bar should have a square cross section with a side of 50 mm

You should also have an electric jigsaw, an electric screwdriver and a hand router. Self-tapping screws will be used as fasteners. The structure after manufacturing will need to be coated with varnish to prolong its useful life. Before you make a table for a circular saw with your own hands, you must decide on its size, which will depend on the length of the workpieces to be processed.

The cut will be obtained more even and accurate, if the workpiece will rest on the entire plane of the table. However, too large parameters of the working surface should not be, as the structure will overload the space. It is necessary to come to an average value, but the height of the table is usually selected individually, it depends on the height of the operator.

Switching the saw on and off

When someone is ready, you can decide how the equipment will turn on and off. If you have the appropriate knowledge of electrical engineering, then the power key can be shunted by you. The control button is placed on the outside of the fin.

If you have made a table for a manual circular saw with your own hands, but automating the operation of electrical equipment is too difficult for you, then the button can be pulled down with a wire, and the device itself can be turned on and off with a power cord. The above table design is quite simple. Any home handyman can cope with the task of making. If you want to expand the functionality you can take care of safety by making the design more complex.