How To Insert The Line Into The Trimmer Spool Video

In addition to the standard lawn line, my trimmer also has a thick line for cutting rough weeds. It is shaped like a pigtail, i.e. Three lines are tightly intertwined. This line has its own spool.

Spare coil storage space

It is very simple to install such a line into a reel. Internal circuit inside the coil. We insert the center of the line with a metal mount in the upper part of the reel, and draw the ends of the line along the grooves and lead out.

A little advice. Try to keep the line out of contact with hard objects when cutting. With this contact, the line will be cut. And since in this trimmer the line is not fed automatically, then you have to stop work every time, remove the spool and release the line again.

Trimming the line into the trimmer.

I want to devote today’s article to the sore subject of summer residents and gardeners of the entire post-Soviet space How to tuck the line into the trimmer. Many trimmer manufacturers do NOT answer this question in their instruction manuals. Therefore, it is also difficult for simple gardeners to figure out how to do it correctly.

I want to start with a brief description of the technical characteristics of the trimmers.

So, trimmers are electric and gasoline. The cutting element in trimmers can be a fishing line and a knife. The line is ordinary, four. Pentahedral and intertwined (in the form of a pigtail). Knives come in 2, 3 and 4 bladed knives. Knives also come in plastic and metal.

The line feed system from the trimmer is manual, semi-automatic and automatic.

The development engineers who create new models of trimmers accurately calculate the diameter (thickness) of the line and the number of knife blades, according to the power of the trimmers. Otherwise, the motor is overloaded, resulting in damage. And these are additional and significant costs.

Trimmers on the market today:

With one nozzle. Only line.
With two attachments. Leskovaya and three-four-bladed knife.
With one nozzle. Only three to four bladed knife.

Our Kulibins long ago learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacement of fishing line with a metal cable, or fishing line. But at the same time, they DO NOT think about the safety of their own and their loved ones, because the cable with the power of the working trimmer can easily break out and not only injure the mower and others, but leave him crippled for life. Using a fishing line can and gives a better effect, I have never personally tried it than a trimmer line, but such work has a number of inconveniences: when it comes into contact with hard objects, it loosens or can simply be pulled out of the reel without limit.

So, what is called closer to the topic. Here is an example of how to thread the line into the trimmer (Trimmer BOSCH Art 30). Everything is very simple. Started.

After you have chosen the line for refueling, you need to cut off the required amount of line, because all the line in skeins will NOT be wound into a reel.

Cut off and start reeling.

Removing the coil and protective cover from the coil.

They took it off. Fastening one end of the line into the gap and carefully and evenly wind the line.

The amount of line should be such that the protective cover of the reel closes and the line on the reel unwinds a little.

We put the other end of the line into the hole on the protective casing.

Next, take the coil and the coil cover. We squirt the end of the line from the reel into the metal hole on the protective cover of the reel. We tighten the line a little.

We put it all on the trimmer. Turn the coil clockwise until it clicks.

I fixed it. Now connect the trimmer to the mains. We put the trimmer in the starting position for work. We turn on the trimmer. Excess line length will be cut into the trimming blade.

Spool in trimmers

That’s all we start working.

Coil with one working tendril

The simplest option and uncomplicated sequence of actions:

  • The dimensions of the spool and the length of the original factory winding determine the recommended length of the line for winding. 2.5 m.
  • One end of the line is inserted into the fixing technological hole located inside the spool.
  • The line is wound on the drum in the reverse rotation of the spool in the direction of the trimmer. As a rule, on the inside of the bobbin, an arrow indicates in which direction the winding is carried out.
  • A small section of the line is left free to lead it out. It is fixed in a specialized groove on the inner side of the bobbin, designed to hold the winding when assembling the bobbin into working condition.
  • The left end of the line is passed through the hole in the outer part of the reel.
  • The bobbin halves are assembled and put on the trimmer bar.

Preparing for replacement

We disassemble the trimmer spool

For clarity, the mowing head (spool) was removed from the lawn mower. To replace the fishing line, it is not necessary to remove it, everything is done locally. It does NOT take long.

We disassemble the trimmer spool. It rests on a latch-latches. Remove the cover by pressing on the latches. If you do it with your hands, there is not enough effort, then use a screwdriver.

The spool consists of the following:

  • Spring case
  • Cover with locking latch
  • Reel with button

The principle of operation is as follows. By pressing the button, the spool presses on the spring and comes out of the locking grooves in the spool cap. By holding the reel in this state, you can twist it by adjusting the length of the line. When the button is released, the body spring returns the coil to its original fixed state.

Disassembled trimmer spool

On the bottom of the reel there are several holes for different diameters of the lines. They may differ from trimmer manufacturer. In some cases (as here) they are signed, in others there is.

These holes are needed to fix the line when replacing it. After winding on the grandmother’s fishing line, the ends of the latter are inserted into them. This is necessary so that the scaffold does NOT unwind when the coil is installed in the trimmer body. In other words, it makes it easier to change the line.

Holes for fixing the line

There are models without specifying the diameter of consumables. Then, in order to find out what the maximum diameter of the scaffold can be used, it is tried on along the holes for the outlet of the fishing line from the trimmer spool body (see Figure below).

Fitting on the holes of the line output

The reel has two line sections separated by a baffle. They may not exist. They are needed only to distinguish and facilitate the winding of consumables.

Two sections for line

First, they are determined with the required length of the loess. The latter is wound into one of the sections of the coil so that it does not go beyond its limits. In this case, 3 mm was wound, the length turned out to be about 2 meters. THOSE. For two sections, you need a 4 meter segment. This is for the 1st way. For the second method, you need two segments of 2 meters each.

Determining the required line length

Now you need to figure out which way you need to wind it. To do this, many trimmer manufacturers apply special designations to the spools, such as in the figure below.

Special designation on the reel

If such designations were not found, then you need to Pay attention to the spool body. There is necessarily an arrow that indicates the movement of the mowing head. The line is wound in the opposite direction.

Bobbin case designation

Single Barber Trimmer Spool

Reel for single-barb lawn mowers

Many owners and experts note the ease of use and ease of refueling the bobbin with one mustache. Depending on the manufacturer, the length of the threaded line can vary from 2 to 5 meters. The end of the line is inserted into the head into a special technological groove or hole, and the winding is carried out in the direction opposite to the working rotation of the bobbin. Most spools have arrow marks on the outside of the body that indicate the direction of travel of the trimmer reel.

After winding, you need to leave a free end of 15-30 cm to enhance the centrifugal force, which is decisive when removing the trimmer line in automatic and semi-automatic spools. Passing the left end through the working hole of the coil and assembling the head.

Method. Two segments

Two coiled line pieces

Method # 2 is not fundamentally different from method # 1. The only difference. Two coiled line lengths instead of one.

The end of each segment is folded

The end of each segment is folded.

Two special fixing sockets

There are two special fixing sockets on the coil (see picture above).

We start reeling the line

They cling to it with a hook formed earlier on the fishing line, and begin to wind the fishing line.

Winding is carried out in a special order

The winding must be carried out in the following order: first the lower line, i.e. The one that is closer to the fixing holes at the bottom of the coil, and only then the top one, i.e. The one that will overlap the bottom section.

The bottom line is reeling

The tip is made into the holes in the trimmer spool body. They are pulled to clicks, which means that the line has come out of the clips.

The tip is threaded into the holes in the trimmer spool body

The coil is fastened into the body. The line in the spool has been replaced.

The line in the spool has been replaced

How to wind line around the trimmer head or lawn mowers

Changing the line in the trimmer: 2 easy ways

Feedback from our readers is very important for us. Leave your rating in the comments with the reasoning for your choice. Your opinion will be useful to other users.

A gasoline or electric trimmer is an indispensable tool in the arsenal of a modern summer resident or owner of his own home.

Thanks to these garden devices, even a large garden plot can be mowed with ease. After purchasing this tool and performing several mows, many people think about how to properly wind the line on the trimmer reel. For an inexperienced user, the first operation to replace it will seem problematic and time-consuming, since the developers often do not fully reflect the instructions for replacing the fishing line in the operating manual.

The first way

Line bent in half

The prepared segment (in this case, it is 4 meters) is bent approximately in half. One piece should be 15-20 cm longer, and is inserted into a special slot located on the dividing wall.

The line is inserted into the slot

In a certain direction earlier, the fishing line is wound. This is done in an interference fit, the line is neatly distributed. In this case, you need to wind a segment that is longer in the section that is closer to the button.

There are designs that do not provide for dividing the coil into two sections. This does NOT change anything, the line is wound in a similar way. You just need to make sure that the segments do not overlap with each other.

The first should end the segment that is located at the bottom of the coil, i.e. The one closest to the fixing holes.

This tip fits into the corresponding hole in diameter. The line is securely fixed.

The line is securely fixed

A long segment is wound another half turn. There he is similarly fixed. In this case, the segment crosses another section of the coil.

A long segment is wound another half turn

The fixed ends of the coiled line are inserted into the holes of the trimmer spool body.

The fixed ends of the coiled line are inserted into the holes of the trimmer spool body

The coil is attached to the body. The ends of the fishing line are pulled with effort so that the fishing line, fixed earlier in the holes of the reel, pops out from there. It is easily identified by the characteristic sound (click).

The ends of the line pull up with effort

Button spool snaps into trimmer spool housing.

Button spool snaps into trimmer spool housing

The line was changed successfully. In this case, you need to set it back to the trimmer and you can start Mowing the grass.

It should be repeated, there is no need to remove the spool from the trimmer. This was done for clarity of the process of replacing the line. You can disassemble the spool in place, wind it on the spool and put it back.

Line replacement completed successfully

The tip so that they do not hit on the trimmer cover can and should be trimmed.

How to tuck the line into the trimmer?

Any machine for mowing vegetation is necessarily equipped with a spool, which, in turn, may differ in different models by the filament feed system (automatic, semi-automatic and manual). It is from this parameter that it is worth starting from before deciding how to fill the line into the trimmer.

In order to tuck the line into the trimmer, you need to take at least 5 meters of material, which then folds in half. The center of the cutting element must be inserted in a specially designed place, and then the cutting attachment must be wound on the spool showing the direction using visual cues. At the end of all the work, the lid, of course, will need to be tightened.

How do I fit the line into the trimmer? Operating tips

Trimmer. This is an excellent modern device designed for mowing unnecessary grass, and its main advantage is that this technique can be used in places where an ordinary lawn mower will simply not be able to reach due to its massiveness. It is necessary to understand in more detail what trimmers are, and how to choose the best option for a particular suburban area.

Types of trimmer line

As a rule, line separation is based on different sample diameters, which can vary from 1.2 to 4 mm. The most commonly used material is a material with a thickness of 2 mm, but in no case should we forget that the choice should depend primarily on the trimmer model.

There is one main rule here: the more power the apparatus has, the thicker the line should be.

This element can also differ in the type of its section. So, it can be round (suitable for cutting plain grass) or square (for mowing soft green cover), sharp edges (tall grass) or be equipped with notches ideal for thin grass.

Do not forget that with the help of a fishing line it is allowed to mow only grass, and for other, coarser vegetation, it is imperative to use knives.

Next, you should take a closer look at the process of how to insert the line into the trimmer correctly. Indeed, it is with this procedure that many consumers often have difficulties.

What is a trimmer?

This equipment is based on the following elements:

  • An engine whose main function is. Rotation of the cutting head at the end of the rod;
  • Directly the head, consisting of a coil on which either a fishing line or a knife can be wound;
  • Knives or line rotating at high speed, which are the main cutting part of the device, how to load the line into the trimmer, it will go a little further.

An electric device is inferior in its power to a gasoline one, so it is ideal for working on a standard plot of land, which is adjacent to a house with source of electrical energy. The main positive aspects of this technique. No noise during operation, light weight, easy operation and certainly environmental friendliness.

As for gasoline trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any area. It is not necessary to use electricity here at all, which has a positive effect on the functionality of such a device. The cutting attachments can be changed for a wide variety of weeds.

One of the most common attachments is the fishing line, so you should dwell on this element in more detail.

Line adjustment

One of the main rules when replacing and adjusting equipment. Any manipulations with the mechanism Must be carried out exclusively with the engine off and the device plug disconnected from the mains.

Perhaps these tips will tell you how to tuck the line into the trimmer as correctly as possible and, accordingly, give your site a neat and aesthetic appearance. All that is required. This is to correctly select the cutting material required by the type and, of course, to determine the category of the most used trimmer.

How to wind line around the trimmer head or lawn mowers

Changing the line in the trimmer: 2 easy ways

Feedback from our readers is very important for us. Leave your rating in the comments with the reasoning for your choice. Your opinion will be useful to other users.

Line selection

In order for the threading of the line into the trimmer head to be successful, it is important NOT to select the consumables. The thicker the cord you tuck in, the thicker and tougher the grass it can cut. Often a universal line is used, the diameter of which is 2 mm. You can choose a diameter suitable for the mower in the following ways:

  • Refer to the instructions that came with the trimmers for line thickness information.
  • Pay attention to the bobbin itself. Sometimes information about the possible diameters of the fishing line is applied on it.
  • Another option. This is to try to insert the cord into the exit hole. If it easily goes through it, then the selected line diameter is suitable for use.

Trimmer reel

You can choose a cord thread according to the type of engine. If the line is too thick, rotation resistance will increase. In this case, the engine will overheat and will soon fail. Helpful hints:

  • For an electrical device with a motor less than 500 V, a 1.3 mm thread is suitable. If one is not found, then you can use a 1.6 mm line. If the power is more than 1 kW, then select a cord with a diameter of 2 mm.
  • In a gasoline trimmer, the mower shaft matters. For the folded version, a 2 mm cord is often used. If the shaft is straight, then install the thread 2.4-2.5 or 3 mm. The thickest line is installed on powerful devices. From 1.3 kW.

Pay attention to the type of section of the cord thread. Some popular options:

  • The most common lines are round. They mow fresh grasses well, but cope worse with shrubs, dead wood.
  • Twisted (spiral) cord is NOT very strong, but is good for thin young grass.
  • Serrated thread with sharp edges ideal for large weeds in neglected areas.
  • You can mow the lawn more evenly with rectangular, star or square trimmer lines, but they are not very durable.
  • The most durable. Two-component cord with inner core and round section.

Types of trimmer line

Please note that you cannot use wire, metal strings and cables, as well as ordinary fishing thread instead of fishing line. The device will be dangerous to both the user and others. So the cable or similar products will gradually begin to work, as a result, their ends will unravel, and small pieces will scatter at high speed.

Line winding

Threading the line into the trimmer reel is a relatively simple procedure, provided you follow a specific procedure. When you need to determine how many meters of consumables are enough, wind it on the bobbin so that the skein does NOT exceed the diameter of the sides. Having decided on the length of the cord, follow the instructions below:

How To Insert The Line Into The Trimmer Spool Video
  • Fold the consumable in half so that one end of the line is 10-15 cm longer than the other.
  • Charging should be started from the center side, which divides the trimmer bobbin into 2 parts. Find the groove where the cord should be inserted. Last bend in half.
  • Determine in which direction you want to wind the line. To do this, take a closer look at the bobbin, which may contain an arrow or an inscription. She indicates the side of the winding. If there is no mark on the reel, look at the arrow on the mowing head. Rewind in the opposite direction.
  • After washing the consumable, it should be done carefully, turn to turn. Try to stick to the maximum thread tension.
  • After completing the laying of the cord, first fasten the short end of the material. To do this, insert it into the groove on the side of the coil, which will fit in diameter. The other end (longer), attach in the groove on the other side of the trimmer bobbin.
  • After securing the line, cut off the ends. Do not forget to leave allowances of about 10 cm.
  • Place the loaded bobbin onto the mowing head of the device. To do this, you need to alternately insert and pull the thread into the outlet holes of the head, in order to then place the bobbin of the device into the skin.
  • Apply the required force, pull the cord out of the locking grooves and tighten the material. After completing this step, put on the cover and secure it with the latches.

Step by step winding of the line to the spool

You can also wind the cord on the trimmer in the second way, in which two pieces of material are charged instead of one. The replacement is done like this:

  • Bend one end of the cord into a hook.
  • There should be a hole at the bottom of the bobbin to hold the line in place. Insert the bent end of the thread there.
  • Wind the Cordova material in the direction of the arrow to the desired level, which does NOT exceed the diameter of the trimmer spool.
  • Do the same for the second bobbin compartment.
  • The assembly of the device head is similar to the first method.

Coil with two working tendrils

In this type of spool, you should determine the number of grooves for winding the line, lying on the inside of the spool:

  • One groove. Both tendrils are wound together in one groove;
  • Two grooves. Each tendril is wound on an individual groove.

For both cases, a line with a length of 2-3 m is taken.In single-groove reels, the line is pulled into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the opposite direction of rotation of the bobbin onto the rod side. The inside arrow usually indicates the correct winding direction. If there are fixing grooves, the ends of the fishing line are threaded through them or held with the fingers of the free hand, threaded through the through hole of the outer half of the bobbin, the spool is closed and attached to the trimmer bar.

The difference between winding the fishing line in double-groove spools is that initially a 2-5 m long line piece is folded in half (to determine the middle fold), and the fold loop is inserted into a special groove between the grooves. Both antennae of the fishing line are wound each along its own groove, fixing the antennae and assembling the coil is similar to the above-described option with one groove.

The first execution of this procedure, perhaps, will seem long and rather laborious, but with time and experience this task will be solved much faster and easier.

The following will clearly show you how to thread the line into the trimmer spool and wind it correctly. This operation is NOT complicated and, with some patience, will surely be crowned with success:

Changing the line in the trimmer: 2 easy ways

In this manual, we will walk through the entire replacement process step by step. Going forward, there are two ways to line the trimmer spool. There are fundamental differences. The difference is that in the first case, one line will be refueled, folded in half, and in the second there will be two such lines.