How to make lugs for a walk-behind tractor with your own hands

Do-it-yourself grousers for a walk-behind tractor are a good way to save money

What we call wheels. in the case of a walk-behind tractor, are lugs. In the overwhelming majority of factory designs, the equipment is equipped with conventional wheels with embossed tires for off-road.

This is done in order to be able to use the traction force for the transport of goods on ordinary dirt roads. Important! The use of a walk-behind tractor (even factory-made) on public roads is prohibited. Even if it has quality factory wheels installed.

Therefore, many owners of small agricultural machinery make lugs for a walk-behind tractor with their own hands. In this case, it is only necessary to fit the landing nest to the hubs of the factory motor plow. When changing the mode of use, simply mount the desired wheels.

If a single-axle tractor is used only in the field, ordinary rubber tires are not needed. And for a mini-tractor of your own production, you do not have to make ordinary wheels at all. In this case, homemade grousers for the walk-behind tractor will be the only set.

The design is not new, the first tractors were produced without rubber tires. The wheels were metal, and powerful transverse or diagonal plates of thick steel were installed on the driving rollers.

How to make lugs with existing factory wheels

The easiest way is to put the structure on the tire like snow chains.

It is enough to take sheet metal with a thickness of 2-3 mm, and cut a strip that will be slightly wider than the tire profile. The preload is provided by a simple tie made of bolted studs. The edges of the strip should be folded to prevent slipping under lateral loads.

The lugs are cut from thicker sheet steel (4-5 mm). They need to be bent in the middle at an angle of 120 °. Then the workpieces are welded to the strips at regular intervals.

Therefore, before starting work, you should use ready-made drawings, or develop a layout yourself.

You can make such lugs with your own hands in a couple of evenings. If you use a regular smooth tread on a homemade walk-behind tractor, the device will turn the equipment into a real SUV.

We will acquaint fans of small mechanization with various types of structures, and varying degrees of complexity.

The simplest do-it-yourself grousers for a walk-behind tractor

  • steel sheet 4-5 mm thick for rims;
  • steel sheet 6-8 mm thick for hooks;
  • angle grinder;
  • welding machine;
  • drilling machine or powerful drill.

Cut out two identical discs from a thinner sheet. In the center we make a hole for the hub and for attaching the wheel to the studs. Cut sawtooth protrusions along the outer edge, 10 cm deep.

Cut out triangular hooks from a thick sheet with cut corners. We weld them strictly perpendicular to the sawtooth notches. Everything, the design is ready for use.

Despite the unprepossessing design, homemade lugs for a walk-behind tractor made in this way have an important advantage. They are heavy enough to provide a firm grip even on loose or soggy surfaces.

Of course, there can be no question of any kind of movement on a dirt road. These wheels are designed exclusively for use in the field.

Another economical option is made from a steel circle with a diameter of 15 mm. You can use the steering wheel from the valve on the main gas pipeline, if you can get some steam somewhere. Hooks are welded to the outer rim, and a suitable hub is attached in the center.

The next design is made from car rims. This is the best option for a homemade walk-behind tractor. When designing, you provide for the standard wheel hubs from the car, and you purchase a complete set of 4 rims. Install tires on one pair, and the second will be for heavy soil.

I’m BUILDING CULTIVATOR for tractor

We take a regular steel corner 50-60 mm and cut into pieces slightly wider than your discs. In the middle of one side, we cut out a triangular sector 60 ° with an angle grinder.

We heat the corner with a gas burner and bend it along the cutout. The joint can be lightly tacked by welding for extra rigidity. We weld the resulting blanks to the outer side of the disc, maintaining an equal distance.

We repeat the assembly on the second disk, keeping in mind the same distance between the corners. Now you can quickly change rubber wheels to steel lugs without experiencing problems with the seat. The disks are the same!

The design of the rims can be simplified. It is enough to cut off the horizontal part (rim) and weld on the steel plates.

The variant is suitable for frequent wheel changes on the same hub type. Only the discs need to be matched.

Homemade grousers for a complex design walk-behind tractor

The products considered above are easy to manufacture, but their consumer properties are far from perfect. Therefore, we suggest that you familiarize yourself with the design, which is not inferior in quality to factory counterparts.

  • Steel sheet 4-5 mm for the central disc;
  • Steel strip 50 mm wide 4-5 mm thick for the outer supporting surface. There will be 6 such hoops. The outer rings make the wheel heavier and stronger;
  • Steel plate 8-10 mm thick for hooks;
  • Arc welding machine, angle grinder, drill or drilling machine.

BCS 853 walk-behind tractor with Disk-Hiller-type Bedshaper

All connections are made using electric welding, a gas burner will not heat metal of this thickness.

Since the diameter and width of the lugs are larger than the seat for standard wheels, we lengthen the axles.

over, it is necessary to provide for the possibility of adjusting the track, depending on the width of the rows in the field. By moving the wheels with hooks, you can set any width and position of the attachment. The weight of each wheel is at least 10 kg, so that a strong grip is ensured.

It is important to understand that such wheels are not implements for plowing or loosening, although some soil treatment is present. It will not work to use them as a loosening cutter, since an independent fulcrum is required.

If you are not faced with the question of how to make the lugs heavier, the structure can be made more delicate and light. Such wheels work well on “light” soils with preliminary loosening.

In such a project, the discs are made of small diameter, the rim is supported by an openwork spoked structure made of profiled steel sheet. Steel thickness for hooks no more than 8 mm. Each wheel weighs less than 7 kg.

Combined lugs

If your technique is homemade, and the ground is not too difficult for work, the wheels should be suitable. You can make do-it-yourself lugs for a uniaxial tractor using a tractor tread.

For manufacturing, you need the halves of the rims from the “Zhiguli”. We select tires with a developed tread from the tractor. We cut off the sidewalls, we get a closed rubber ring with good tread. We open the halves from the rims and twist them firmly after laying the tires.

The resulting lugs allow you to move along a compacted dirt road without fear of loosened it. On the soft soil of the plowed field, the wheels will also not let you down, although the tractive effort will be less than when using the metal version.

If, in addition to the tenacity of the wheels, there is the task of obligatory loosening of the soil in the rut, knife-type lugs are made. You can create a homemade rim for attaching the hooks, or you can weld them onto rims.

The only drawback of this design is that the knife-type lugs are not adapted for the usual movement of the walk-behind tractor. In any case, the land in the rut will be plowed. When loosening the soil in spring in combination with traditional nozzles, the width of the soil cultivated in one pass doubles, saving your time.

Conclusion: It doesn’t matter which way you make the lugs. The main thing is that it is not difficult at all, and the savings are huge.

There are still questions, see homemade lugs for the walk-behind tractor from what was found in the barn.

Making lugs for a walk-behind tractor with your own hands

Nowadays, there are a lot of techniques to help farmers in their difficult task of growing various crops. Walk-behind tractors are very popular. a kind of mini-tractors capable of performing different operations. plowing, hilling plantings, and so on. Additional attachments are also produced for walk-behind tractors, which expand their functionality. This article will focus on grousers for motoblock devices.

Read more:  DIY snow scraper for tiller

Purpose and varieties

The lugs are designed to increase the weight of the motoblock unit and improve the contact of the equipment with the ground, especially in areas with too wet and / or loose soil. They are a spike construction that is worn on the axle instead of / over pneumatic wheels with soft tires.

Several lug configurations can be found on the market today. Distinguish between universal and special lugs. The first ones can be used on any walk-behind tractor, the main thing is to choose the right size. The latter are made for a certain brand (model) of the unit.

If we take the place of production, then the products can be divided into homemade and factory.

By design features, lug attachments are divided into those requiring dismantling of wheels with pneumatic tires and worn over the tires. The first type requires fixation on the wheel axle.

The use of lugs allows:

  • it is better to process the soil layer;
  • improve the cross-country ability of both the motoblock unit itself and the attached trailer with a load;
  • to increase the stability of equipment due to an increase in its weight;
  • attach other additional equipment.

How to choose?

When choosing a suitable model, first of all, you should pay attention to the brand of the walk-behind tractor. For the Neva and Neva MB model range, variations of 43-centimeter diameter are excellent, the depth of immersion of spikes into the ground of which is 15 cm. For motor-blocks of the Salyut brand, half-meter lugs are needed, in which the depth of immersion in the soil will be at least 20 cm. “Zubr” needs tall products. 70 cm in diameter.

Lugs are not required only for heavy motoblock units, their weight guarantees them stable movement on almost any surface. But if you decide to improve the permeability of your heavy model of a walk-behind tractor (weighing more than 0.2 tons), choose wide lug devices. with a diameter of 70 cm.

Pay attention to one important point. there must be no contact of the surface of this type of attachment with the body part of the unit.

The choice of a suitable lug model also depends on the type of soil and the nature of the outside of the products. Their surface can be shaped like thorns or arrows. Consider when purchasing products that the low height of the spikes is not suitable for wet and loose soils. they are ineffective and easily clogged with soil. Arrow hooks are the most popular and are considered universal.

When purchasing additional equipment for your unit, first of all consider options from the same manufacturer.

Pay attention to the cost. it depends on the manufacturer and modification.

Do not forget that for light motoblocks, weighting structures are also needed, otherwise, on difficult soils, you will have to face the unit slipping.

How to do it yourself?

Soil wheels can be made at home, without spending extra money on the purchase of finished products. There are several fairly successful ways to make this equipment.

The first method is to remake old tires. To do this, you just need to “dress” them in a structure that will prevent slipping.

To do this, you will need:

  • welding machine;
  • saw for metal;
  • metal sheets with a thickness of 2-3 mm;
  • metal sheets with a thickness of 4-5 mm.

From a thinner metal sheet, you need to cut 2 strips slightly wider than the width of the tire. The length of the strips should be such that, when twisting them into a ring, the wheel fits freely inside them. Pull the strips into rings, fix with bolt pins. In this case, it is desirable to bend the long edges inward.

make, lugs, walk-behind, tractor, your

From a thicker iron sheet, cut the blanks for the hooks, then bend them along the middle at an angle of 90 degrees and again. across at an angle of about 120 degrees. You should get some kind of beveled corners in the middle.

Then weld them to the base of the lug at regular intervals. This is a very important point, because if the identity of the distance is not observed, a single-axle tractor will wiggle from side to side.

Therefore, first make drawings with the necessary calculations and measurements.

The second method is even easier to execute. You will need:

  • 2 discs from the wheels of a Zhiguli car;
  • a sheet of steel of sufficient thickness (4-5 mm);
  • welding machine;
  • angle grinder;
  • electric drill.

A strip of metal must be welded onto car wheels. the ring base of the lug. Strong teeth are already installed on it.

Cut triangular blanks of the same size from the sheet and cut the corners. Weld them neatly perpendicular to the metal strip, keeping equal spacing. The dimensions of the teeth depend on the mass and size of your walk-behind tractor.

Approximate dimensions of lug devices for various brands of motoblocks

Lug diameter, mm

Self-made lugs are attractive primarily because you design them for a specific uniaxial tractor, that is, they will ideally fit your device. You save your money, because often additional attachments (which include lugs) are quite expensive, especially for motoblock units of foreign, in particular, European production. It is also worth noting that not only car wheels, but also motorcycle wheels, and even gas cylinders. any round metal parts of a suitable size are suitable for the manufacture of homemade lug devices. To make teeth, you can use corners 5-6 cm wide (cut into pieces of a suitable size), cutters or a thick sheet of steel.

Use parts made of metal alloys with high strength characteristics, and pay more attention to the teeth of the lugs, because the main load when immersed in the soil goes to them.

To increase the service life, paint the finished products with paint for metal products or cover with an anti-corrosion compound.

When installing ready-made lugs, test them first at low speed and minimum load. this way you can identify deficiencies without risk of damage to the unit.

You can learn more about how to make grousers for a walk-behind tractor with your own hands.

Optimal dimensions

It’s no secret that heavy machinery works the land better than light machinery. This is evidenced by the fact that people began to be interested in the question of how to make lugs for a car with their own hands. Even hard ground can be processed with such equipment, which a light tractor does not cope with very effectively. For such units, large lugs are required. To summarize, the design parameters will depend on the size of the walk-behind tractor.

Thus, the following popular walk-behind tractors can be distinguished:

  • “Neva”. Walk-behind tractors are common, which adapt to any conditions. But in the case when the farm already has a Neva tractor, which by its characteristics is not considered universal, you can make soil cutters yourself. It must be borne in mind that the diameter of the device should not be more than 36 centimeters, and the width should not be more than 11.
  • MTZ. Even despite the fact that such units are Belarusian, and more. The bottom line is that the wheels of these motoblock models are quite large. It takes a lot of labor to make high-quality lugs. It is important that the dimensions are correct and that the triangular plates that engage the ground are carefully welded to the main lug wheel.
  • “Firework”. Such a device is being assembled according to the “Neva” scheme.
  • “Centaur”. The wheels in such an apparatus are somewhat similar to the “Neva”. But the first car has 11 centimeters longer wheels. If a grouser is made for “Centaur”, then its length should be 450 millimeters, and width 110. It can also fit other models of motoblocks, including other manufacturers.

It is also helpful to make a lug extension. They are designed to increase the angle of rotation of the structure and the width of the potassium and counterweight. To do this, you must attach a slotted sleeve to the hub. An additional axle is inserted into such a sleeve, which is fixed with a bolt. In conclusion, you need to fix the soil cutter wheel on the axle.

Thus, there are many options to make do-it-yourself soil cutters without much labor and emptying the for expensive factory models.

make, lugs, walk-behind, tractor, your

Purpose and varieties

The lugs are designed to increase the weight of the motoblock unit and improve the contact of the equipment with the ground, especially in areas with too wet and / or loose soil. They are a spike construction that is worn on the axle instead of / over pneumatic wheels with soft tires.

Several lug configurations can be found on the market today. Distinguish between universal and special lugs. The first ones can be used on any walk-behind tractor, the main thing is to choose the right size. The latter are made for a certain brand (model) of the unit.

If we take the place of production, then the products can be divided into homemade and factory.

By design features, lug attachments are divided into those requiring dismantling of wheels with pneumatic tires and worn over the tires. The first type requires fixation on the wheel axle.

The use of lugs allows:

  • it is better to process the soil layer;
  • improve the cross-country ability of both the motoblock unit itself and the attached trailer with a load;
  • to increase the stability of equipment due to an increase in its weight;
  • attach other additional equipment.
Read more:  A snowmobile from a tiller on tracks with your own hands

What sizes need to be taken

On the Internet, you can find many drawings and diagrams for self-manufacturing lugs. But what sizes correspond to this or that brand? Sometimes this is not indicated in the drawings.

So, the most common cultivators are: Neva, Mole, Salut, Oka, Bison, Centaur. Consider motoblocks Neva.

The grousers for Neva walk-behind tractors are perfect for the Salyut and Favorit motor-cultivators. Dimensions for self-made tools for a walk-behind tractor: height. 34 cm, width. 11 cm. These dimensions are shown in the drawing, and all the small details that must be observed for good work with the ground are indicated. By the way, the self-made lugs do a little more than the factory ones, because it is difficult to choose the exact size. Sizes for motoblocks of other brands vary from 34 cm to 70 cm and above.

Consider the main functions of lugs on the Neva uniaxial tractor:

  • Better plowing of land.
  • The installed tools make the single-axle tractor heavier and better to use, which improves soil handling and allows you to work with heavy attachments.
  • This product helps to climb a mountain with a full trailer in a fairly short time.
  • Teeth catch small and large plant roots, pulling them out.

Varieties of lugs for motoblocks

The modern market is oversaturated both with walk-behind tractors themselves and with hinges for them. The lugs are no exception.

Motoblock lugs are classified according to the following criteria:

  • application:
  • universal. suitable for any modification of motoblocks and differ in size characteristics;
  • special. their dimensions (diameter and width) are adapted to a specific cultivator model;
  • origin:
  • factory;
  • homemade.

In addition, structurally lugs are divided into those that:

  • for installation require removal of the main wheel. Such lugs are attached to the cultivator axis with special clamps. They look like full-fledged iron wheels for a walk-behind tractor;
  • put on from the outside of the tire and do not need to be attached to the axis of the walk-behind tractor.

What are the lugs for the walk-behind tractor for??

Motoblock grousers are special devices that outwardly resemble ordinary metal wheels, supplemented with studded pads. The name itself indicates their main functional purpose. to guarantee perfect adhesion between the cultivator and the underlying surface. the soil. Thanks to these devices, a single-axle tractor can move freely on any terrain, regardless of weather conditions.

In addition, the lugs for the walk-behind tractor perform other functions:

  • contribute to better soil cultivation;
  • simplify the transportation of both the walk-behind tractor itself and the loaded trailer connected to it on the off-road or on loose soils;
  • increasing the weight of the unit, provide it with good balance and stability in space;
  • allow the use of other attachment adapters, for example, for seedbed cultivation.

How to choose?

When choosing a suitable model, first of all, you should pay attention to the brand of the walk-behind tractor. For the Neva and Neva MB model range, variations of 43-centimeter diameter are excellent, the depth of immersion of spikes into the ground of which is 15 cm. For motor-blocks of the Salyut brand, half-meter lugs are needed, in which the depth of immersion in the soil will be at least 20 cm. “Zubr” needs tall products. 70 cm in diameter.

Lugs are not required only for heavy motoblock units, their weight guarantees them stable movement on almost any surface. But if you decide to improve the permeability of your heavy model of a walk-behind tractor (weighing more than 0.2 tons), choose wide lug devices. with a diameter of 70 cm.

Pay attention to one important point. there must be no contact of the surface of this type of attachment with the body part of the unit.

The choice of a suitable lug model also depends on the type of soil and the nature of the outside of the products. Their surface can be shaped like thorns or arrows. Consider when purchasing products that the low height of the spikes is not suitable for wet and loose soils. they are ineffective and easily clogged with soil. Arrow hooks are the most popular and are considered universal.

When purchasing additional equipment for your unit, first of all consider options from the same manufacturer.

Pay attention to the cost. it depends on the manufacturer and modification.

Do not forget that for light motoblocks, weighting structures are also needed, otherwise, on difficult soils, you will have to face the unit slipping.

Homemade hooks of complex design

Easy to manufacture lugs have characteristics that are far from perfect. Imagine a design that is not inferior to the quality of factory products.

  • Steel sheet 4-5 mm for center disc.
  • Steel strip 50 mm wide and 4-5 mm thick for the outer supporting surface. There will be six such hoops. The outer rings make the wheel stronger and heavier.
  • Steel plate for hooks 8-10mm thick.
  • Arc welder, drill or drilling machine, angle grinder.

The joints are made by electric welding, since a gas burner will not heat metal of this thickness.

Since the diameter and width of the hooks are larger than the seat for standard wheels, the axles are lengthened.

It is possible to adjust the track, which depends on the width of the rows in the field. By moving the wheels with hooks, you can set any width and position of the attachment. Each wheel weighs at least 10 kg, which means strong traction is provided.

Such wheels are not implements for loosening or plowing, although there is some soil treatment. They cannot be used as a loosening cutter, since an independent fulcrum is needed. If you do not need to make the hooks heavier, the structure can be made lighter and more delicate. These wheels perform well on “light”, previously loosened soils. Small-diameter discs, the rim is supported by an openwork structure with spokes made of profiled steel sheet. For hooks, the thickness of the steel should be no more than 8 mm. Each wheel is not heavier than 7 kg.

Constructive solution with wheels

The easiest and cheapest way is to make and put the structure on the factory rubber wheel, like ordinary anti-slip chains.

First you need to take a metal sheet and cut a strip out of it slightly wider than the rubber profile. The tension on the wheel can be done by securing the strip with two bolts and nuts. Edges around the entire circle must be bent to avoid slipping under lateral loads.

Then you need to take a thicker sheet of steel (3-5 millimeters) and cut transverse strips, which will catch on the ground. They are bent in the middle at an angle of 120 degrees. The transverse strips are then welded to the main body at the same distance. On average, such hooks should be welded from 10 to 15, depending on the diameter of the wheel. In this regard, before starting work, you must prepare a drawing yourself or download it on the Internet.

Such lugs for a motor cultivator can be made in a few days. In the case when the existing walk-behind tractor has ordinary metal and smooth wheels, such a device will turn it into a real SUV.

Combined hooks

Such devices are needed not only for motoblocks. Many are also interested in the question of how to make lugs for a cultivator with their own hands. For these purposes, you can use combined wheels, for example, using a tread from a tractor.

To bring such a project to life, the halves of the Zhiguli disks should be prepared. It is also necessary to prepare tractor tires with strong tread. Then you need to cut the sidewalls. Thus, a rubber disc with excellent tread is obtained.

These wheels can be used on hard dirt roads as they will not loosen the ground. On soft ground, they will also perform well, but the grip on the ground will be much less than with metal discs.

If you need a wheel option not only for good grip with the ground, but also for loosening, then you need to make knife lugs that will not ride on ordinary roads, but are only suitable for loosening. So the land will be cultivated.

When cultivating the land in spring, the width of the occupied area with the help of such wheels doubles, which cannot but rejoice, as it saves a lot of time.

It doesn’t matter how and what type of lugs to make, the main thing is that they are made independently. elementary, from improvised means, and the budget for their manufacture is simply ridiculous.

How to make lugs for a walk-behind tractor with your own hands

Grousers for a walk-behind tractor should be in the arsenal of any owner of such a device. They are quite common among farmers, as they allow you to increase mass and traction. Grousers for a walk-behind tractor can be made without problems with your own hands, even without much experience. They have a simple shape, and you can see many different modifications of the device on the market now.

What is the lug used for?

A lug is used in order to obtain additional tractive force for the transportation of goods on unpaved roads. It should be noted that it is prohibited to use a walk-behind tractor on public roads, even if it is equipped with high-quality wheels.

Read more:  Your Husqvarna Chainsaw Will Not Start 137 Cause

Many owners of small agricultural machinery make their own lugs. In this case, you just need to make a similar mount, like the “iron horse”. Additional wheels are mounted if necessary.

When a single axle tractor is used exclusively in the field, then rubber tires are not needed. With your own design of the structure, rubber wheels can be omitted, but only lugs for daily work can be used.

This design is not know-how, but has been in demand for a long time. Previously, no rubber tires were made. The wheels in tractors and walk-behind tractors were metal, and transverse steel plates were additionally installed on the leading ones for better coupling.

Constructions for “advanced” farmers

Simple designs from Zhiguli disks can be easily made, but their consumer properties are not ideal. Therefore, in special cases, there is a need for self-made assembly of lugs, which are no worse than factory models, and they will be able to heavily weight a uniaxial tractor.

To manufacture a complex structure, you need:

  • Steel sheet 4-5 millimeters for the main circle.
  • Steel strip 50 millimeters, 4-5 millimeters thick for the supporting surface. There should be 6 of them. They strengthen the disc well and make it heavier.
  • Steel sheet 8-10 millimeters for creating hooks.
  • Welding machine (automatic or semi-automatic), drill, angle grinder, drilling workbench.

All parts are connected using electric welding, since a gas burner will not be able to heat metal of this thickness.

Due to the fact that the diameter of the lugs is larger than the usual wheels for the walk-behind tractor, it is necessary to lengthen their axles.

In this case, it is desirable to provide for the possibility of adjusting the length of such axes, since the rows on the field can be of different widths. Thus, by moving the hooked wheels vertically, you can set them to any level, width and position. In this case, the weight of each wheel will be at least 10 kilograms, and this provides excellent traction.

You need to know that such devices are not suitable for plowing the ground or loosening, although a little processing of the soil occurs at the time of travel across the field. For loosening the lugs on the walk-behind tractor are not suitable, since an independent fulcrum is needed here.

If the design according to the project should not be heavy, then you can make it more beautiful, with an aesthetic appearance. Such wheels can be used on light soils, where loosening has been done previously. They have a small diameter; in the middle, curly knitting needles made of profiled steel sheet are used. The steel for the hooks must be no more than 8 millimeters, and the weight of the wheel must be no more than 8 kilograms.

Constructive solution with wheels

The easiest and cheapest way is to make and put the structure on the factory rubber wheel, like ordinary anti-slip chains.

First you need to take a metal sheet and cut a strip out of it slightly wider than the rubber profile. The tension on the wheel can be done by securing the strip with two bolts and nuts. Edges around the entire circle must be bent to avoid slipping under lateral loads.

Then you need to take a thicker sheet of steel (3-5 millimeters) and cut transverse strips, which will catch on the ground. They are bent in the middle at an angle of 120 degrees. The transverse strips are then welded to the main body at the same distance. On average, such hooks should be welded from 10 to 15, depending on the diameter of the wheel. In this regard, before starting work, you must prepare a drawing yourself or download it on the Internet.

Such lugs for a motor cultivator can be made in a few days. In the case when the existing walk-behind tractor has ordinary metal and smooth wheels, such a device will turn it into a real SUV.

Creating the simplest model with your own hands

For production you will need:

  • steel sheet for cutting wheels with a diameter of 4-6 millimeters;
  • sheet for hooks with a thickness of 7-8 millimeters;
  • angle grinder;
  • professional drill or drill bench;
  • welding.

It is necessary to make a round wheel base from a sheet with a thickness of 4-6 millimeters. You will need to cut two identical disks. In the center, holes should be made for the hub and for fastening to the studs. Cut projections from the outside with an angle grinder. As a result, the design will be similar to a sawtooth disc, only the teeth will be much smaller (7-9), and their size is larger.

Trapezoidal hooks and triangles with cut corners are cut from a thick sheet of 6-8 millimeters. After that, it remains only to weld them perpendicular to the protrusions, and the structure is ready for use.

Although a self-made construction of this type does not have an aesthetic appearance, this is not a big deal compared to its advantages. It is very heavy and forms a perfect grip on the ground, even on soggy and loose soil.

Another practically free option is to create a lug using an old steel circle with a diameter of 15 centimeters. If there is access, the steering wheel can also be used to shut off the gas on the line. On the outside, it remains only to weld the hooks, and from the hub you need to adjust to the diameter of the central hole of the steering wheel.

Many people are interested in how to put wheels from “Zhiguli” on a uniaxial tractor. In principle, there is nothing complicated here. It is only necessary to adjust the hub, and so that the wheel fits to the walk-behind tractor in diameter.

From “Zhiguli” you can also use wheel disks. This is not a bad option for a homemade lug. When creating a project, you need to use a standard hub from a car, and purchase four wheels: leave two with tires, and make lugs with two for places with poor traffic.

You will need to take a regular square of 50-60 millimeters and cut it into equal pieces. Their length should be slightly wider than the car rim. After that, a 60-degree triangle must be cut on one side of the square. The place of the triangle heats up and bends by 20-30 degrees. In order for the hooks to be rigid, it is recommended to additionally boil the fold. Then it remains to weld the resulting structures to the disk from the “Zhiguli”, keeping an even distance between them.

Then the next disc must be processed in the same way. After that, there will be no problems with replacing rubber wheels with grousers, since they are the same, and the hub will always fit.

The design can be simplified. There is no need to weld squares in this way. It is enough to make cuts on discs and weld steel plates on these places.

This option is ideal if you need to constantly change wheels, only the discs need to be identical.

Optimal dimensions

It’s no secret that heavy machinery works the land better than light machinery. This is evidenced by the fact that people began to be interested in the question of how to make lugs for a car with their own hands. Even hard ground can be processed with such equipment, which a light tractor does not cope with very effectively. For such units, large lugs are required. To summarize, the design parameters will depend on the size of the walk-behind tractor.

Thus, the following popular walk-behind tractors can be distinguished:

  • “Neva”. Walk-behind tractors are common, which adapt to any conditions. But in the case when the farm already has a Neva tractor, which by its characteristics is not considered universal, you can make soil cutters yourself. It must be borne in mind that the diameter of the device should not be more than 36 centimeters, and the width should not be more than 11.
  • MTZ. Even despite the fact that such units are Belarusian, and more. The bottom line is that the wheels of these motoblock models are quite large. It takes a lot of labor to make high-quality lugs. It is important that the dimensions are correct and that the triangular plates that engage the ground are carefully welded to the main lug wheel.
  • “Firework”. Such a device is being assembled according to the “Neva” scheme.
  • “Centaur”. The wheels in such an apparatus are somewhat similar to the “Neva”. But the first car has 11 centimeters longer wheels. If a grouser is made for “Centaur”, then its length should be 450 millimeters, and width 110. It can also fit other models of motoblocks, including other manufacturers.

It is also helpful to make a lug extension. They are designed to increase the angle of rotation of the structure and the width of the potassium and counterweight. To do this, you must attach a slotted sleeve to the hub. An additional axle is inserted into such a sleeve, which is fixed with a bolt. In conclusion, you need to fix the soil cutter wheel on the axle.

Thus, there are many options to make do-it-yourself soil cutters without much labor and emptying the for expensive factory models.

make, lugs, walk-behind, tractor, your