How To Make Steering On A Tiller • CIMFLOK.COM

Adapter making instructions

Now let’s talk about how to independently make a front adapter with steering for your small tractor.

To manufacture the steering wheel tiller adapter, you will need the following materials:

Two identical wheels on an axle. The radius of the wheels ranges from 15-18 inches. Even wheels from the old Soviet “Volga” can fit.
Steering wheel and column bearings.
Frame steel (channel, pipe or angle).
Fasteners (washers, bolts, nuts).
Lubricants (lithol or solidol).
Consumables (drills, electrodes, angle grinder discs).
Wrench set.
Angle Grinder.
Welding machine.
Drill.

Before starting work, it is important to take into account that the wheels should not have a very large or small radius.

Making an adapter to the tiller with your own hands

Any activity on the land takes a lot of time and effort. For this reason, gardeners are increasingly using special equipment, such as tillery. However, it is impossible to do everything by means of this unit. Without a special adapter, you will not be able to plow or huddle the earth, as well as clear the area from snow and construction debris. A trolley with a seat for a tiller nowadays costs quite impressive money. However, there is a way out. Today we will talk about how you can make a homemade adapter for a home tiller without any special effort.

Steering adapter

The presented view assumes a rigid fixation on the tiller. The steering gear is carried out in the format of a separate independent unit. In addition, a pair of wheels, which act as a steering gear, are installed at both the front and rear. Each of them is guided by personal preferences. The position of the steering gear is also related to spare parts, daily use. Driving a “home” mini-tractor with a homemade adapter is NOT at all more difficult than, for example, an ATV.

With movable joint

Such units are also called a breakaway adapter. It is the lightest and most economical device to manufacture. The movable clutch is located at the front. The disadvantage is that you have to turn the entire mechanism, without using additional control. Because of this, the radius and angle of rotation will be larger.

Tiller adapter features

The adapter is a special device for riding a tiller. Using it, you will be able to drive the tiller and Till the soil at the same time.

Working with the tiller will be much easier if you use an adapter. You can change the attachments, depending on what kind of work you need to do. hilling, planting, weeding, transportation. With this device, all processes will be doubled.

This unit allows you to comfortably sit on the seat with which it is equipped. Now you can do household chores, but with more comfort. Steering adapters on the market. However, you can make them yourself.

How to make a tiller adapter with your own hands

Today it is difficult to find a person who WOULD NOT use a tiller when processing his site. Further improvement of technology led to the invention of a special device with which the tiller can easily be converted into a comfortable mini tractor. At the same time, it became possible to perform field work while sitting, which greatly facilitated the work of the villager. Such a mechanism is called a tiller adapter.

Steering Tiller Work

Let’s say a few words about the features of steering a tiller with a steering wheel, and why it is recommended to perform this option during assembly. It is not for nothing that this type of conventional and home-made cars is so popular, because it has a lot of advantages:

The operator does not have to spend his energy walking along the Minitractor;
The traction potential of the equipment is realized one hundred percent;
Such a mini tractor is more maneuverable and functional;
Now, in order to process the site away from home, and not have to additionally transport the tiller. it will be possible to simply drive on it, like on a regular car or tractor;
Control is more lightweight and convenient than other types;
Now you do not need to hold the entire mass of this heavy and bulky apparatus in your hands.,
It becomes possible to quickly assemble and disassemble the unit;
Control parts are NOT significantly modified during rework;
Good balance of weight along the axes.

We will NOT mention here the noise of work and other characteristic features, in principle, of all tractors. Let’s just say about one characteristic drawback. not very reliable stability, which is associated with a movable hitch. However, the pluses are of course more impressive.

Algorithm of actions

We start manufacturing attachments for the tiller.

Important! Before starting work on the drawings, be sure to check the compliance of the sizes and numbers.

To make a steering adapter for a tiller, you will need a frame with a bushing and a fork. This will allow the tiller to rotate freely through the steering wheel.

Everything will start with making the frame. It can be made from cut pieces of the selected steel of the required length. The metal can be divided by an angle grinder and the elements can be electrically welded or bolted together.
Next, we build the chassis. If your tiller’s motor is in front, then the track size must be determined by the main wheels. The rear ones are mounted to the frame using an axle. You can create it from a piece of pipe of a suitable width. At the ends of this pipe, we press in the bearings with bushings. Wheels will be installed on them. If the tiller’s engine is located at the rear, then the track width must be greater, otherwise the mini-tractor will not be able to keep running normally during operation. In such a situation, the base wheels of the tiller will be more optimally removed and reinstalled, but already on a more spacious bridge.
To make the steering wheel to the unit, and not required to additionally remove the handle in the car or motorcycle. Stop using the handle. In other words, the operator will be able to control the Mini Tractor with a steering wheel, which looks like a motorcycle. However, the operator will not be able to backtrack normally with it. That is why it will be preferable to mount the steering column on a mini tractor.
When using an all-metal frame, the steering will be integrated with the front axle of the tiller. It is possible to make articulated resistances, then the control column will rotate the entire front half-frame. To do this, the craftsman will need to attach the cogwheel to the front frame. The second gear is installed on the steering column.
The seat, which can be previously removed from a passenger car, needs to be welded to the sled frame. The master needs to make sure that it is adjusted, especially when operating the front adapter attached to the tiller.
If you intend to use a mini tractor to work with plows and cultivators, then you will need additional welding of the bracket. An auxiliary hydraulic system must be installed to operate the attachment. The pump for it can be easily dismantled from agricultural machinery. If you have to work with a semi-trailer, then you need to take care of additional welding of the towbar to the rear of the frame. It can also be successfully borrowed from a passenger car.
Fastening (coupling) can be done by hand. To do this, you need drawings, which are easily searched for in articles on the top results of the desired topic. And we will talk about how exactly to implement the coupling.

To make a U-shaped hitch, you need a metal channel of suitable thickness and size. The hitch is attached to the tiller under the steering column through pre-drilled holes in certain places. A bracket and a pin are inserted into them. Important Make sure that the parts are of high quality, this will avoid unnecessary problems in the future and waste of time in the present. All parts Must be made of high quality high strength steel.

This completes the installation of the front adapter on the Neva tiller. After the completion of the assembly, it remains only necessary to lubricate the mini tractor and test it for functioning. The adapter assembly can then be considered complete. Now you can safely deal with the required work on land plots with the help of new technology.

Tiller with steering

With this method, the power unit will be located behind the driver’s back and rigidly attached to the front adapter. Consequently, the coefficient of adhesion of the driving wheels to the soil will increase. This, in turn, will increase the tractive effort, which will make it possible to work with any attachment. For such experiments, the light tiller “Salyut” is best suited, having a mass of about 75 kg and a power of 6.5 liters. From.

In this case, you need a steering column with a gearbox. But this is for this case, if you dare to make a tiller with front steering. This procedure is much more complicated and painstaking than a simple Articulation, but the result will please. you get a tiller with a steering wheel and a seat, and you will have all the necessary levers at hand.

During the manufacture, you will need not only a steering wheel and a gearbox, but also tie rods with openers. You will definitely need gas, clutch and brake pedals located under your feet. They are connected to the standard controls with homemade rods or steel cables.

On the right side of the seat, a lever is installed for raising or lowering the attachment, as well as a parking brake handle. Fenders with headlights are placed on the front wheels. And the mini-tech finally gets the finished look of a tiller with a front adapter.

It should be noted that. At the same time, the adapter has good technical characteristics that allow you to fully appreciate the advantages of working on your mini-equipment.

DIY front adapter for tiller

Dear visitors of the site Himself the Builder! We present to your attention another homemade product from the craftsman Mikhail, who is engaged in the construction of various homemade mini tractors and other agricultural products. Techniques.

This time we will look at a rather useful homemade product that will undoubtedly come in handy for owners of tilers. a homemade front adapter with steering for a tiller.

Such a device greatly facilitates the work of cultivating the garden, because in fact I installed the tiller adapter, it will already be a mini-tractor with steering control, and working on a mini-tractor is much easier than with a tiller.

The process of building an adapter for a tiller is presented in THESE detailed

Homemade frame welded from a shaped tube.

The base for the seat is welded to the frame.

Steering rack from a VAZ car.

Steering rods also from a VAZ car.

As a result, the author made a mini-tractor from a tiller with his own hands.

Steering type adapter

How to make a steering adapter for a tiller? The type of structure in which the steering wheel is provided must be rigidly fixed. The steering gear is performed as a separate independent unit. A pair of wheels and behold, which serves as a steering gear, are installed in the front and rear. Fixation points are selected based on individual characteristics. The location of the steering gear depends on the type of part. When assembling, it is recommended to perform just such an improved model.

A motorized cultivator with steering has many positive qualities:

The operator will not waste energy when moving around the unit;
The equipment has maneuverability and increased functionality;
Traction force is realized at 100%;
You can get to the workplace by tillery without the use of additional equipment;
Ease of management compared to other options.

Making an adapter to the tiller with your own hands

Algorithm of actions

To start assembling additional equipment for a motor-cultivator, you will need a drawing, in agreement with which the fastening elements and the construction of fragments will be completed. If you have special skills and experience, a homemade tiller adapter and drawing can be done independently. In case of fear of making a mistake, you should take ready-made drawings. Before designing, it is recommended to check and verify the compliance of dimensions and numbers.

Appointment

The main task of the technology with the front adapter is to speed up and facilitate the processing of the garden.

If you attach additional devices to the device, you can expand the range of applications:

Remove hay;
Cultivate the land. plant and collect;
Clears the area of snow;
Level the surface of the earth;
Transfer small-sized cargo.

Steering Tiller Work

The operator does not have to spend his energy walking along the Minitractor;
The traction potential of the equipment is realized one hundred percent;
Such a mini tractor is more maneuverable and functional;
Now, in order to process the site away from home, and not have to additionally transport the tiller. it will be possible to simply drive on it, like on a regular car or tractor;
Control is more lightweight and convenient than other types;
Now you do not need to hold the entire mass of this heavy and bulky apparatus in your hands.,
It becomes possible to quickly assemble and disassemble the unit;
Control parts are NOT significantly modified during rework;
Good balance of weight along the axes.

Adapter making instructions

Now let’s talk about how to independently make a front adapter with steering for your small tractor.

To manufacture the steering wheel tiller adapter, you will need the following materials:

Two identical wheels on an axle. The radius of the wheels ranges from 15-18 inches. Even wheels from the old Soviet “Volga” can fit.
Steering wheel and column bearings.
Frame steel (channel, pipe or angle).
Fasteners (washers, bolts, nuts).
Lubricants (lithol or solidol).
Consumables (drills, electrodes, angle grinder discs).
Wrench set.
Angle Grinder.
Welding machine.
Drill.

Before starting work, it is important to take into account that the wheels should not have a very large or small radius.

Making a device with a movable joint

This is the simplest device. The adapter itself will be located behind the tiller. Making it is not difficult, but the process requires attention and concentration. The service life of the mechanism depends on the quality of work. This adapter is suitable for heavy tillers, for example, “Neva”. It has an engine power of over 7 liters. From. And weight from 105 kg. This allows, rather than slipping, to pull Not only the adapter, but also agricultural implements.

The following materials and tools are required for manufacturing:

Electric drill with the necessary set of Drills;
DC welding machine and electrodes;
Angle grinder with a set of cutting and grinding discs;
Hammer, file, square, various hardware;
Sheet metal with a thickness of at least 5 mm;
Several profile pipes of 40 x 50 and 50 x 50 mm;
Round water pipe with thick walls with a diameter of 30-45 mm;
Steel rods with a diameter for a round pipe;
Channel 40 x 50 mm;
Two wheels from “Zhiguli” or “Oka” with a bearing and a hub;
Driver’s seat.

Any size of the adapter can be chosen, but based on the needs of the mini-technician. The frame itself can be made slightly above or below the tiller axis. For the wheels, the optimal suspension is the portal suspension, which provides a decent ground clearance. It is not necessary to install shock absorbers on the adapter. this complicates the design. The easiest way is to take a seat with a built-in elastic element.

Next, go directly to the manufacture of SEPARATE nodes.

Coupling. This is a welded mechanism, which is a hinge that works in two planes. It is then installed in the base of the adapter frame and bolted to it. It consists of two pieces of pipes, measuring 40 x 50, welded together and a piece of round water pipe. A welded tee is inserted into it. The tee itself consists of a rod and part of the same pipe. This is the most critical part, so the welds should be perfect.
Adapter frame. Here you will need a profile pipe and a channel. They are welded together, strengthened, and then wheel stands are made. Further, the struts are fixed with braces welded to the frame and wheel hubs. Install and secure the wheels.
Several pieces of pipe are welded to the main frame to install the seat.
Fixes and adjusts the seat. It is placed so that when the steering wheel turns, the operator’s back does not come off the back. Tiller controls do not need to be removed. this is done when the power plant is located behind the driver.
Install the finished hitch.
Attached to the tiller.

Next, a wheel locking mechanism is made. To do this, use a ready-made brake system from any car and adjust it to the installed wheel hubs.

Features of the adapter design

This attachment includes:

Frame;
Driver’s seat;
A pair of wheels;
Wheel axle;
Coupling device.

That is, the adapter gives the impression of a cart that is attached to the main equipment. As a result, it looks like a mini tractor.

Now let’s talk about each component in detail.

To make a front adapter for a do-it-yourself steering tiller, a frame is required. The body or driver’s seat is attached to it. The frame is mounted on the chassis.
For ease of use, the driver’s seat is attached to the frame. This was conceived in order to make it pleasant and easy to operate the equipment in the process of gardening.
Wheels and wheelset are here to make gardening easier for the operator with this small tractor.
There are two types of wheels for a home tractor. rubber and metal. Metal wheels can be used for reliable work in the fields. Rubber wheels Equipped with a deep tread pattern. This enables the operator to move the machine on unpaved roads and, if necessary, off-road. In any case, the wheels for the adapter are supplied upon purchase in a set for the equipment itself. But if the user wants to change them. you need to Pay attention to their type and size.
Device for coupling (fastening) with a tiller. The fastening for the MTZ unit is made of steel or cast iron, using welding. The hitch is one of the essential building blocks. It provides a reliable connection to the motorized part of the trailed equipment. The most used is the U-shaped attachment point, because thanks to this device, the vehicle is more stable.

Sources:

http://zemlyconsalt.ru/motobloki/rulevoe-upravlenie-na-motoblok-svoimi-rukami.html