How to mow a motorcycle at the fence. How to mow grass with a trimmer with a metal knife

How to mow a trimmer with a knife correctly

You someday wondered? How to mow grass with a trimmer correctly. Not? But this is an interesting question. Let’s understand.

Trimmer for grass is a universal tool that you have ever had at your disposal. Powerful trimmers for grass, which are popularly called motorcycles, can not only equal the edges of your lawn. They can be equipped with metal knives to remove weeds, reeds, shrub and even small trees.

So, as powerful trimmers for grass cut larger and rigid plants than ordinary electric trimmers for grass or trimmers for grass with a curved shaft. The treatment of them and security measures will be, as well.

So, how to properly and safely mow a trimmer:

Protective equipment when working with a motorcycle (trimmer)

Tip: This article does not replace the instructions given in the guide for the use and safety precautions. Always read the product management before use and observe safety precautions.

For safe work with a motorcycle (trimmer) you will need:

• Helmet;
• Headphones;
• Eye protection (mesh shield or glasses, but it is better to use both);
• Long durable pants (the legs are in the immediate vicinity of the knife or fishing line, so they must be protected);
• Shoes with a non.slip sole (preferably with a steel nose);
• Soft gloves (to protect and absorb vibration);

Kosim the grass

The purpose of the trimmer head (trimmer coils for grass, mowing head, trimmer’s spilles for grass)

• To remove all unwanted vegetation under the walls, along fences, borders, around trees, pillars, bushes, between stumps and other obstacles.
• To mow grass on the lawn in the places inaccessible to the lawn mower.
• In order to selected liquid grass and weeds before the mowing of the site on hay.
• To drain weeds in the garden between plants.
• To drain the board of potatoes in the garden before digging up.
• To completely remove grass and weeds, for example, from paths.
• To sweep (an air vortex is created from large revolutions of the fishing line for grass).

Note

Trimmer head (mowing head or trimmer coil for grass) has high performance when mowing grass, t.to. It is easier for a metal knife and it has more capture diameter. 45 cm, against 25 cm at the hay knife.

Varieties of the tool

Three versions of garden trimmers are available on sale. electric, battery and gasoline. Network models connected to the outlet are less common, since they have minimal capabilities for autonomous work due to binding to the mains. In addition, from the point of view of savings, this is not the best trimmer for grass for mowing grass. An electric unit can justify itself only in working on the sites adjacent to the house, if there is the possibility of eyeliner eyeliners for connecting a cable.

The potential for shaking flying stones puts windows in the houses and cars. The shields around the Trimer head are in place to reduce the amount of flying debris and protect the operator. no one removes the shields, after the modified trimmer for grass is no longer under the guarantee or can be used safely.

When refueling repeatedly, make sure that the engine is stopped, and the trimmer for the grass is installed on a flat flat surface. it is preferable to not herbal. Trimmer for grass should never stay on the grass for a long time. Re.refueling should be performed with the proper system to avoid leakage or overflow.

A direct competitor of electrical models have always been considered gasoline modifications. They provide high power, practically do not limit movement and cope even with sharp shrubs. But, a gasoline trimmer for grass for mowing grass is also characterized by great weight, noise of work, strong vibrations, produced gases and high cost. Battery versions are also not tied to source of energy, but they lose to gasoline trimmers in power indicators.

Be sure to use the appropriate line weight, as indicated in the user manual. A strip of trimmer for grass, which is too thick for the engine, can lead to damage. Some trimmers for grass can take a blade for pruning, but never use a blade on a trimmer that is not intended for the use of rubberized blades. Accessories that are not intended for a specific trimmer for grass can create excessive vibration, engine wear or linking. This can lead to engine voltage, a possible failure of the component and potential damage to the operator.

How to use a trimmer correctly

Garden trimmers for grass are effective. Newchers think that it is easy to work with a lawn mower, because you just need to include it in a socket or pour fuel, but this is not entirely like that.

The efficiency of the garden tool and its service life directly depend on operating conditions. Therefore, before using a trimmer for grass, you need to perform preparatory work.

The lawn with which you need to mow the grass is carefully examined. Be sure to remove glass and large stones. Having flew out from under a working mower, they can injure a person. They remove the wire from the lawn, because it can be wound on a rotating element, break a mower.

After that they move to the installation of the cutting system. There are trimmers for low.power grass on sale, which use only a fishing line for a trimmer. It is designed for mowing juicy and soft grass. But there are models with a capacity of more than 1 kilowatts on which metal knives are installed. They cut sowing and other hard weeds, trim the young shrub.

In order to replace the cord with knives, you need to unscrew the mounting nut, install the cutting element. Then the nut must be returned to the place, tighten it with the key.

The operator must take care of his safety. Mow grass in tight protective clothes. Special glasses are used to protect the eyes, they will protect from dust, grass and flying garbage. Hands are covered with gloves.

The electric trimmer for the grass is included in the network, and the battery models are charged for several hours before starting operation. Fuel is poured into a gasoline mower.

The mower is kept so that the spool or knife is located parallel to the ground. When the tool is installed in the correct position, the motor is included. After the grass is bewildered, the mower is turned off.

First start

Before the first launch, the operator collects a mower, the procedure is described in the instructions that are attached to the product.

If the trimmer for the grass is gasoline, it is necessarily checked before operation. The fuel tank is filled along the neck.

The motor should work for the fuel, so at the first launch it should work for several minutes without load. After that, start mowing grass.

Running

Before starting operation, gasoline braids are necessarily rolled up. The operator turns on the motor, he must work for a while at idle. It is necessary to ensure that the engine does not overheat, the load should not be.

When running in, motorcycles increase the load gradually. If you start work with high speeds, the motor will work well, this will affect the further work of the mowing.

At the first launch, you should not fully develop a temporary resource. After the engine works at idle, you can proceed to processing the lawn. The lawn mower should operate for no more than 15 minutes, after which the engine is turned off, it must cool down.

If you need to run the electrimmer, the braid is first collected. Then make trial launches at least 3-5 times. If the engine works well, go to mowing. At first they work for no more than 5 minutes, then the duration of work is gradually increasing.

How to wear a belt

If the tool has a shoulder mount, before starting work it hangs on the shoulder. The trimmer for the grass is fixed on both shoulders if it has a backbone mount.

The model with a bicycle handle is held with 2 hands, the D-shaped handle is wrapped in palm. The belt must be worn so that it is convenient, then the back will not get tired.

How to cut the lawn so that it turns out to be even

So that the grass on the lawn is trimmed evenly, it is necessary to lower the mower as low as possible during operation. The site must be divided into squares. You need to work, moving clockwise. In this case, the hay will always lie on the left without interfering under the feet.

Kosim under hay

It is better to mow hay not with a fishing line, but a metal disk. Grass is cut under the root, maintaining its length as much as possible.

Spinning high grass

If you need to mow high grass, this is done in several suits. The lawn processes 2-3 times. The rotating part is lowered from top to bottom, in which case the grass is not wound on the reel.

The operator must remember that the grass wound to the coil leads to overheating of the motor. If this happened, the motorcycle is turned off, and the coil is cleaned.

Most effective mow grass with the ends of the fishing line, and not the entire length. In the second case, the tool works worse, engine overload is possible. If you need to cut the grass on the site of a large area, to increase the efficiency of a trimmer for the grass, you must be tilted towards the mowing.

Raw weather Operation

Electrics cannot be used in the rain, a short circuit is possible. When the precipitation stops, you need to wait for the grass to dry.

Not all gasoline mowers are protection against moisture, so some of the manufacturers prohibit the operation of mowers in the rain.

The duration of the mowing

You can use an electric trimmer for grass for no more than 20 minutes, after which you need to take a break for the same time. Violation of the operating mode negatively affects the engine, reducing its resource.

Gasoline braids operate from 40 minutes to 1 hour, and with professional tools you can mow grass until fuel ends. The break between work should be at least 20 minutes.

How to choose a garden trimmer for grass (2019)

With the advent of spring, many owners of personal households are already beginning to think about future weed cleaning and cutting lawns. The appearance of a trimmer for grass on the market made the site at times easier. For those who are preparing to purchase this device for the first time, it is advisable to study its main technical characteristics so as not to make a mistake in choosing.

Trimmer for grass. a tool for haircuts of grass, actually a motorized braid for grass with a gasoline or electric drive. It differs from the usual manual tool not only the obvious efficiency of the process, but also maneuverability. the trimmer can be carefully removed by excess vegetation in hard.to.reach places.

The device itself has a simple construct, and most models, regardless of the power source, are similar in this sense.

The engine transfers a torque to the cutting head, on which knives or fishing line for a trimmer are installed, as well as protective devices. a casing or bracket. For comfortable work, the device has a bar long in human height.

Security tips

Before starting work, it will not be superfluous to make sure that you have a protective equipment. For the most part, it is safe to work with a trimmer for grass, but there is always a chance that the machine will begin to throw garbage. At least wear goggles and closed clothes. Long trousers and thick gloves are suitable for the way. Before starting work, it will not be superfluous to inspect the trimmer for the grass to make sure of good working condition.

Preparation for work

If you first cut the lawn, then spend a few minutes to understand how to properly mow grass with a trimmer with a fishing line. Go along the lawn and remove any stones, sticks or large garbage.

Turn on the trimmer for the grass and keep it so that the handle fits tightly to the thigh. Make sure the head is at a convenient height for cutting grass. Go to one edge of the site and start cut the grass.

Since you are trying to make an even cut, keep the head parallel to the ground and make short schedules. It is better to first set the height of the cutter, so that it is possible to correct it to an ideal state.

Direction of rotation

Considering further how to properly mow a trimmer with a fishing line, it is worth paying attention to specific techniques that will help to achieve an ideal result. Most often people make a mistake, not paying attention to the direction of rotation. Just like a disc drop throws sawdust, a trimmer for grass discards garbage. If it rotates counterclockwise, then pushes out the developed material on the left side and cuts on the right side.

Therefore, if you are moving along the path or along the curb, hold on to the right side and install the tool head so that it can cut and push the grass to the left. If you go the opposite way, then the garbage will begin to block the way to the trimmer.

Cutting technique

It seems that the uniform haircut of the grass should be simple. draw a trimmer for grass over the grass, and the fishing line for the trimmer will cut it to the desired length. But this is not the best approach and will actually lead to the appearance of a bald man on the lawn. To turn a naughty tool into a reliable machine, it is important to rely on knowledge.

• The ends of the string are a place where the maximum incentive force is concentrated. At the same time, the faster and freedom the movements will be, the easier the process will go. Processing under the cone. Gives the lawn a beautiful view, the technique is especially spectacular along the roadsides, near the fence or trees. Keep the tool so that the string hit the grass at a slight angle.
• Framing. Where the surfaces are almost parallel, say, between the path and the roadway, I want to emphasize the edge. Therefore, we turn the trimmer for the grass so that the string is vertical. Then conduct a tool on the cutting path.
• No need to try to use all techniques at once. If the lawn has never been cut, then first you need to free it from garbage, then trim the grass to one length, and only then take it behind the edges.
• Kosim with a trimmer. If you have to work in tall grass, then you can use this just reception. This means that the tool should move along the path of the letter U.
• Screed. Another technique that is used to remove grass growing on the tracks in cracks. Tilt the tool so that the tips of the strings simply slide along the road surface, then move into the base of the weeds, cutting them to a solid surface. But be careful: tilt the tool too strongly, and you just tear a fishing line for a trimmer. Accept too sharp angle, and the fishing line for the trimmer will not be able to cut the grass evenly.

The first launch of an electric trimmer for grass

It is also not difficult to set up and running a trimmer ethletric for grass. To do this, it must be assembled and launched, but not to work right away. It will be best to start the device several times (3-5 will be enough) to make sure of the easy start. If the device starts without problems, you can run it for five minutes on the lawn grass, without strong loads.

Almost all modern electric trimmers for grass are designed for operating mode 20/20, t.e. Twenty minutes of operation and twenty minutes of rest. The latter is necessary for the engine to cool down a little. If you operate such a trimmer for grass for more than 20 minutes, preventing it from relaxing the necessary time, then the engine’s resource may decrease sharply, as it experiences an increased load.

The continuous operation mode in the electric trimmer is not provided, but, nevertheless, if you do not run into it correctly, gradually increasing the load and operation time (up to 20, but no more, minutes), the device can work incorrectly, delivering trouble to the owner with constant breakdowns and failures At work.

Security tips

Before starting work, it will not be superfluous to make sure that you have a protective equipment. For the most part, it is safe to work with a trimmer for grass, but there is always a chance that the machine will begin to throw garbage. At least wear goggles and closed clothes. Long trousers and thick gloves are suitable for the way. Before starting work, it will not be superfluous to inspect the trimmer for the grass to make sure of good working condition.

How to mow grass with a trimmer with a fishing line correctly?

Practical garden tools are increasingly popular. With the acquisition of a new assistant, questions are inevitable how to properly mow grass with a trimmer with a fishing line. To begin with, this is an excellent addition to an existing lawn mower. She can be entrusted with large areas, and finish work will be done by a trimmer for grass with fishing line. We clarify that the trimmer fishing line is designed to cut weeds and delicate branches. For more rough work, models equipped with metal blades or chain are used.

Safety precautions during work

The technique of work with a trimmer with a string and a disk has some differences. So, the fishing line for the trimmer cuts the grass with the very end, but with too fast the movement is used for the entire length. As a result, the stems are not cut, and the grass is wound on the cord, which is why the engine is overloaded. Therefore, you need to choose the optimal wiring speed. In addition, when mowing high and hard grass, a fishing line for a trimmer is consumed faster than when cutting the lawn.

There are several simple recommendations, the implementation of which will make mowing more efficient and effective.

• It is convenient to bite the garden paths, flower beds and the edges of the Lujaiks with a trimmer with an engine below. The plane of rotation of the coil of such a device can be placed perpendicular to the ground.
• Thick thickets, large weeds, bushes must be mowed with disks or special nozzles.
• When cleaning large areas, the device must be tilted to the left, in the direction of scope.
• To mow grass around flower beds, shrubs and other objects, you should rotate the head of the trimmer for the grass with a casing to them. So it will turn out to bake objects themselves and not damage them.

It should be remembered that the bobbin or the disk should not touch the ground and any obstacles except grass and branches that need to be cut off.

Safety precautions when working with motorcycles are to fulfill the following requirements.

• Do not use trimmers in the rain or with increased humidity.
• People and animals should be at a distance of at least 15 m from the working device: trimming of grass, small garbage and stones fly out from under the cutting head at high speed and may injure.
• It is better to put on the grass trimmer to a dense fabric that completely closes the arms and legs.
• You need to work in protective glasses, gloves, headdress, closed shoes, special headphones or Berushas.
• The wire of the network trimmer for the grass should be behind the mower.

So, the use of manual vehicles for mowing grass allows you to maintain order on a small area. It is more convenient to use a mower in vast areas. In addition, a trimmer for grass is relevant when harvesting hay and restoring order in the territory: small herbal scraps can be mulched strawberries and other useful plants. You can clearly see the mowing process with this tool on the video.

Unlike a disk. to mow a trimmer with a cord is safer, but not always optimal. As they say, it is worth choosing a cutting mechanism for the features of your work site or using complex systems, where you can operate both the disk and the fishing line for the trimmer, if necessary, installing the first or the second or the second.

As we already wrote, a lawn mower with a fishing line is automatic, semi.automatic and manual. In the first case, the cutting element is “thrown away” after each new launch of the apparatus. This is very convenient, but not economical enough, for example, if your site is irregular in shape, and contains corners, zabins, and with a long transition to each of these areas, the mechanism must be turned off and turned on.

It is important for the operator to understand that the length of the ends of the fishing line, which he sees in front of himself in an elongated state is exactly the diameter that will mow the device. You can read the rules for refueling the fishing line in a coil in one of our articles, but the main thing is to remember: the length of the ends of the fishing line should be optimal to conduct competent mowing.

How to mow a benzoca? This must be done so that it serves you as long as possible:

• keep a coil at a height of 10 cm from the ground;
• when working with high grass. mow its top, and then by the stem to protect yourself from its winding to the device;
• Drive the device in the same direction in which the coil rotates;
• lawn grass, especially at the walls and garden decor, it is better to mow the fishing line with the tips so as not to overload the engine;
• every 15 minutes take a break to the device.

Any answers to questions about braids you will find in this section of the site, but we will propose the spare parts for lawn mowers among another assortment for a benzo tool.

Ideally, high grass can be mowed with a powerful trimmer with a thick fishing line. But, you must admit, the land where weeds grow is not always even, often among landowners in plots there are shrubs and all kinds of garbage, stones. In order not to ruin an expensive equipment. it is better to produce mowing in two approaches.

In a situation, if you have to prepare grass on hay, and you are more or less oriented in a state of earthen plot-then you can more easily predict your work. Any technique intended for mowing grass can also cope with high thickets. The main thing is not to rush and competently approach the process itself, which we clearly demonstrate in practical video.

• Do not overload the mechanism;
• When the grass is confused, instantly turn off the device;
• Do not mow moist grass even a gasoline trimmer.

Buy a coil for a trimmer for grass, knives and discs. you can always with us, in a Kosikos store.

Safety precautions during work

Safety precautions when working with motorcycles are to fulfill the following requirements.

• Do not use trimmers in the rain or with increased humidity.
• People and animals should be at a distance of at least 15 m from the working device: trimming of grass, small garbage and stones fly out from under the cutting head at high speed and may injure.
• It is better to put on the grass trimmer to a dense fabric that completely closes the arms and legs.
• You need to work in protective glasses, gloves, headdress, closed shoes, special headphones or Berushas.
• The wire of the network trimmer for the grass should be behind the mower.

Important! You can’t stretch your hand or foot to the cutting head!

So, the use of manual vehicles for mowing grass allows you to maintain order on a small area. It is more convenient to use a mower in vast areas. In addition, a trimmer for grass is relevant when harvesting hay and restoring order in the territory: small herbal scraps can be mulched strawberries and other useful plants. You can clearly see the mowing process with this tool on the video.

How to use a trimmer

Tips on how to mow grass

• Mowing grass when it is not very large. This will allow you to cope with work much easier and faster than if you mow a strongly overgrown lawn or yard. A large mass of grass, weeds, plants and trimmer will be hard to grind. In addition, a lot of chopped grass will lie on the surface, which must either be cleaned, or wait until it dries, or while it becomes compost, which is not very beautiful and can cause various diseases of the grass.
• Avoid mowing not grass, but fences, stones, bricks, any other hard objects, as this will greatly accelerate the wear of the fishing line and it will require its more common replacement.
• Some will have to wear an orthopedic corset (although it may seem stupid). Back support allows you to maintain performance longer and feel more comfortable.

Warning how to use a trimmer

Trimmer for grass, like a twin.franc grinder, chainsaw or garden tractor is unreasonable for what it is not intended for.

Keep a trimmer for the grass away from yourself so as not to cut off your fingers or leg.

Do not mow a trimmer in water or wet grass. If you have an electric trimmer for grass, you may hit an electric shock. If you have a gasoline trimmer for grass, you can pollute water and grass with fuel and exhaust gases.

You will need things to mow grass

• Pants. Preferably strong working jeans without holes. You can mow grass somewhere, so if your legs are not protected, soon you will feel how several thousand ants crawl along your legs and bite you. Sometimes a weed can scratch to the blood or stuck strongly, thrown back on the mower.
• Gloves. wandering, leather, it does not matter. If you mowed grass without gloves, then by the end of the kota you will not be able to move even a little finger without pain. The weight of the grass through a trimmer for the grass presses in the hands and abrasions and scuffs will appear on their hands if they were not in protecting gloves.
• Protective glasses. you cannot mow grass with your eyes closed, because small pieces of grass fly in the face. One good hitting your eyes will convince you that protective glasses are mandatory. This applies to one of the main rules how to use a trimmer.
• Have a sufficient amount of drinking water at hand. Even if you think it will not be hot, think again. You need to mow grass with a vibrating trimmer for a long time.
• Have a spare fishing line for a trimmer or a seasoned trimmer head to replace if it ends.
• If you have an electric trimmer for grass, you must have an additional extension cord. If you have a gasoline trimmer for grass, you must have a supply of fuel.
• Rake to rake mowed grass or weeds.
• Headdress if you work in the sun.
• High boots (pants are best tucked into boots).
• If you plan to work at dusk or later, make sure that you have a spray from insects and a lantern.

How to use a trimmer

Tips on how to mow grass

• Mowing grass when it is not very large. This will allow you to cope with work much easier and faster than if you mow a strongly overgrown lawn or yard. A large mass of grass, weeds, plants and trimmer will be hard to grind. In addition, a lot of chopped grass will lie on the surface, which must either be cleaned, or wait until it dries, or while it becomes compost, which is not very beautiful and can cause various diseases of the grass.
• Avoid mowing not grass, but fences, stones, bricks, any other hard objects, as this will greatly accelerate the wear of the fishing line and it will require its more common replacement.
• Some will have to wear an orthopedic corset (although it may seem stupid). Back support allows you to maintain performance longer and feel more comfortable.

Warning how to use a trimmer

Trimmer for grass, like a twin.franc grinder, chainsaw or garden tractor is unreasonable for what it is not intended for.

Keep a trimmer for the grass away from yourself so as not to cut off your fingers or leg.

Do not mow a trimmer in water or wet grass. If you have an electric trimmer for grass, you may hit an electric shock. If you have a gasoline trimmer for grass, you can pollute water and grass with fuel and exhaust gases.

You will need things to mow grass

• Pants. Preferably strong working jeans without holes. You can mow grass somewhere, so if your legs are not protected, soon you will feel how several thousand ants crawl along your legs and bite you. Sometimes a weed can scratch to the blood or stuck strongly, thrown back on the mower.
• Gloves. wandering, leather, it does not matter. If you mowed grass without gloves, then by the end of the kota you will not be able to move even a little finger without pain. The weight of the grass through a trimmer for the grass presses in the hands and abrasions and scuffs will appear on their hands if they were not in protecting gloves.
• Protective glasses. you cannot mow grass with your eyes closed, because small pieces of grass fly in the face. One good hitting your eyes will convince you that protective glasses are mandatory. This applies to one of the main rules how to use a trimmer.
• Have a sufficient amount of drinking water at hand. Even if you think it will not be hot, think again. You need to mow grass with a vibrating trimmer for a long time.
• Have a spare fishing line for a trimmer or a seasoned trimmer head to replace if it ends.
• If you have an electric trimmer for grass, you must have an additional extension cord. If you have a gasoline trimmer for grass, you must have a supply of fuel.
• Rake to rake mowed grass or weeds.
• Headdress if you work in the sun.
• High boots (pants are best tucked into boots).
• If you plan to work at dusk or later, make sure that you have a spray from insects and a lantern.

Tall grass mowing using fishing line

For thick stems of grass (weeds), a more powerful trimmer for grass with thick fishing line is used. However, in areas where large weeds grow, the soil is often uneven. Catching up for clods of the earth, the engine of the trimmer for the grass will sharply brake. By abusing this, you can easily damage the engine. Sowing the upper tier, you will see where the grass reaches the greatest length. in deeper places. Focusing on such “height changes”, you equal the “haircut” of the lawn, bringing it closer to the ideal.

The mowed grass is suitable both on hay and on the top dressing of the lawn. At the same time, the course of mowing grass is easier to plan, and the process will go faster.

Tips for the muzzle of high herbal are in the following.

• The engine should not overload.
• When the fishing line is confused on uneven ground or in high grass, immediately turn off the motor.
• When using gasoline or diesel as an energy carrier, you cannot mow wet grass.
• You need to move the trimmer for the grass right in front of you and left, t. to. Small grass falls on the previously processed sector. Thus, the upper tier of the grass is cut off. The lower layers are captured when you have already gone in the opposite direction.
• If the processed area is very large, mow one conditional zone after another, to which you divided the territory before work.
• Move precisely on the outside, so as not to trample the mowed grass, making your result inconspicuous.
• Moving lines should be located parallel to each other. This will easily circumvent the trees found on the site, while overload of the motor is excluded.

Subject to these recommendations, the grass will not fly to the sides during operation, and the process itself will simplify and accelerate several times.

About how to properly mow the grass with a trimmer, see further.