How to put the line into the trimmer spool and which one is better to use for this? Very often, those people who personally own summer cottages and vegetable gardens are faced with the need to care for the lawn on the site. In such cases, you simply cannot do without the usual manual braid or trimmer. The first is slowly fading into the background, and the number of people who use it is getting smaller and smaller. The trimmer works automatically and does not require a lot of effort. over, you don’t need a special skill to use it.
Types of trimmer lines
First of all, in order not to resort to frequent replacements, it is better to use a denser line. The number of its types and manufacturing firms is simply amazing. The main parameter of the trimmer line is its diameter. It varies from 1.6 to 3.2 mm. The most common type is 2mm line. However, the selection must be made depending on the type of trimmer you have.
There are several options for the section of the line. So, it can be round, square, in the form of a star with sharp edges. The last option is the most effective. However, it should be used only on powerful braids and at the same time you need to know how to thread the line into the trimmer spool. Therefore, it can be concluded that the more powerful your lawn mower, the thicker the line should be.
A process such as winding a fishing line on a trimmer is not difficult, but it has its own characteristics. First you need to choose the right fishing line, the diameter of which is prescribed in the device’s passport.
First, unscrew the spool cap. Be careful, as the thread can be both left and right. The left-hand thread is necessary so that the head of the scythe does not unwind during operation.
How to put the line into the trimmer spool and which one is better to use for this?
Very often, those people who personally own summer cottages and vegetable gardens are faced with the need to care for the lawn on the site. In such cases, you simply cannot do without the usual manual braid or trimmer. The first is slowly fading into the background, and the number of people who use it is getting smaller and smaller. The trimmer works automatically and does not require a lot of effort. over, you don’t need a special skill to use it.
How does a trimmer work?
The principle of operation of such a device is that the grass is mowed by a special fishing line installed on a fast-rotating head. The number of revolutions per minute can reach 8000. For a short time, the line becomes unusable, more precisely, it is erased. Then the summer residents have a question: How to fill the line into the trimmer coil?
What is a trimmer?
This equipment is based on the following elements:
- Motor, the main function of which is the rotation of the cutting head at the end of the rod;
- The head itself, consisting of a coil, on which either a fishing line or a knife can be wound;
- Knives or fishing line rotating at high speed, which are the main cutting part of the device, how to load the fishing line into the trimmer will go a little further.
An electric device is inferior in its power to a gasoline one, so it is ideal for working on a standard plot of land that is adjacent to a house with source of electrical energy. The main advantages of this technique are the absence of noise during operation, light weight, ease of use and, of course, environmental friendliness.
As for gasoline trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any area. It is not necessary to use electricity here at all, which has a positive effect on the functionality of such a device, the cutting attachments can be changed, working with weeds of a variety of types.
One of the most common attachments is the fishing line, so you should dwell on this element in more detail.
How do I fit the line into the trimmer? Operating tips
The trimmer is an excellent modern device designed for mowing unnecessary grass, and its main advantage is that this technique can be used in places where an ordinary lawn mower will simply not be able to reach due to its massiveness. It is necessary to understand in more detail what trimmers are, and how to choose the best option for a particular summer cottage.
Types of trimmer line
As a rule, line separation is based on different sample diameters, which can vary from 1.2 to 4 mm. The most commonly used material is a material with a thickness of 2 mm, but in no case should we forget that the choice should depend primarily on the trimmer model.
There is one main rule here: the more power the apparatus has, the thicker the line should be.
This element can also differ in the type of its section. So, it can be round (suitable for cutting plain grass) or square (for mowing soft green cover), sharp edges (tall grass), or be equipped with notches ideal for thin grass in diameter.
Do not forget that with the help of a fishing line it is allowed to mow only grass, and for other, coarser vegetation, it is imperative to use knives.
Next, you should take a closer look at the process of how to insert the line into the trimmer correctly. Indeed, it is with this procedure that many consumers often have difficulties.
How to properly fill the line in the trimmer: instructions
If you set the line incorrectly, the unit may break down and you will have to fork out to repair it. Therefore, before proceeding with the procedure, be sure to read the detailed step-by-step instructions. It’s easy to learn how to do this, and in a few minutes you can go mowing the grass.
How to tuck the line into the trimmer:
- First, you need to remove the nozzle that is located on the gearbox. This is easy to do: the connection is the hole located on the side of the bottom washer and the recess. You can find notches on the axis. Be sure to insert a screwdriver to prevent the shaft from turning. When removing the nozzle, you need to twist to the right, not to the left. Disassemble the coil, sink the clips located on it into the body, then gently squeeze the edges.
- How to handle the line automatically? You need to handle it as carefully as possible, otherwise the spring will fly out of it (the same applies to the fishing line with a semi-automatic mode). Hold the parts with your fingers and take your time.
- A reel with a through hole on the body you need to pull the line through both holes (outer and inner). Then turn the button and release the thread.
- If the reel functions only with 1 cutting element, the procedure is quite simple and quick. You will find a small hole in the inside of the spool that will keep the thread in place. You need to insert the end of the thread into the hole, then start winding. This should be done in the opposite direction in tone to the movement of the coil. Take a closer look, maybe there is an arrow on your reel model, it indicates the direction in which you need to wind.
- The end of the thread is fixed with a groove located in the inner part of the bobbin. Leave a long piece of line outside.
- If your model does not have a groove, hold the end of the thread with your hand, then place the top of the spool and thread the end of the thread through the hole.
- Put the spool in the trimmer and get to work!
How much line do you need?
For normal operation of the trimmer, 3-4 meters of material is enough. The length of the thread depends on the dimensions of the spool. The larger it is, the longer the line.
If your trimmer has a reel with not one, but two cutting elements, unwind the required amount of fishing line and thread the thread through the hole, the fishing line should be divided into 2 parts equal in length. Then start winding 2 pieces at the same time. When almost all of the line is wound, leave short ends and clamp them in the grooves. This method is suitable for a single groove spool.
If the device has not one, but two grooves, you need to insert the fishing line in a different way, fold the cut thread in half, at the end you will have a loop. You need to insert this end into the groove, it is located between the two grooves. One end in each groove. Assemble the coil in the same way as in the previous case.
Line selection
First of all, you will need to choose the correct line. You should not do this at random, since it all depends on the model of the unit. Pay attention to indicators such as the diameter of the thread, as well as its cross section. You can find information about the diameter in the instructions for the trimmer. The second indicator (section) depends on what kind of work you are going to perform. If this is a soft young grass, a round one is suitable, if it is hard, choose a square or 5-sided section.
Line selection
First of all, you will need to choose the correct line. You should not do this at random, since it all depends on the model of the unit. Pay attention to indicators such as the diameter of the thread, as well as its cross section. You can find information about the diameter in the instructions for the trimmer. The second indicator (section) depends on what kind of work you are going to perform. If this is a soft young grass, a round one is suitable, if it is hard, choose a square or 5-sided section.
How to properly fill the trimmer
You don’t have to work on site for hours on end to mow and tidy up your lawn. With any amount of work, such a device as a trimmer can quickly cope with it. This type of technique can cut grass of any length and density, it all depends on the model chosen. In order for the unit to fully work and perform its main function, you need to refuel the line, otherwise the trimmer will not be able to complete the task.
How to properly fill the line in the trimmer: instructions
If you set the line incorrectly, the unit may break down and you will have to fork out to repair it. Therefore, before proceeding with the procedure, be sure to read the detailed step-by-step instructions. It’s easy to learn how to do this, and in a few minutes you can go mowing the grass.
How to tuck the line into the trimmer:
- First, you need to remove the nozzle that is located on the gearbox. This is easy to do: the connection is the hole located on the side of the bottom washer and the recess. You can find notches on the axis. Be sure to insert a screwdriver to prevent the shaft from turning. When removing the nozzle, you need to twist to the right, not to the left. Disassemble the coil, sink the clips located on it into the body, then gently squeeze the edges.
- How to handle the line automatically? You need to handle it as carefully as possible, otherwise the spring will fly out of it (the same applies to the fishing line with a semi-automatic mode). Hold the parts with your fingers and take your time.
- A reel with a through hole on the body you need to pull the line through both holes (outer and inner). Then turn the button and release the thread.
- If the reel functions only with 1 cutting element, the procedure is quite simple and quick. You will find a small hole in the inside of the spool that will keep the thread in place. You need to insert the end of the thread into the hole, then start winding. This should be done in the opposite direction in tone to the movement of the coil. Take a closer look, maybe there is an arrow on your reel model, it indicates the direction in which you need to wind.
- The end of the thread is fixed with a groove located in the inner part of the bobbin. Leave a long piece of line outside.
- If your model does not have a groove, hold the end of the thread with your hand, then place the top of the spool and thread the end of the thread through the hole.
- Put the spool in the trimmer and get to work!
How to properly wind the line on the trimmer spool
Many, having worked out the factory line on a recently purchased trimmer, try to wind a new one, but cannot, because they do not know how to properly wind the line on the trimmer spool (bobbin). It seems that there is an instruction, but it still does not work. Let’s try to deal with this issue in this article.
So, in order to wind the line, you first need to remove the coil from the trimmer so it will be more convenient. Removal method will depend on the type of trimmer.
Removing the coil from the trimmer
On small, bottom motor electric trimmers (when operating near the ground), the reel usually has two buttons on the sides. Click on them and disconnect one half of the coil body from the second, which remains on the trimmer. Together with the first half, the inner part is also taken out, on which the fishing line is directly wound. When disassembling, be careful: there is a spring inside that can fly out and get lost.
On electric and gasoline trimmers with a curved bar (there is still no way to put a knife on such trimmers), you need to wrap the coil body itself with one hand, and with the other hand you need to start rotating the lamb on it counterclockwise. It is he who attaches the coil to the trimmer bar. Having unscrewed the lamb, carefully remove the entire coil, trying not to lose the spring inside.
On electric and gasoline trimmers with a straight bar and a gearbox at its end (on such trimmers, in addition to the fishing line, you can also install a knife), we look for a hole under the coil, insert, for example, a screwdriver into it, quietly rotate the coil until the screwdriver crawls even deeper, and the coil will lock. Now we turn the whole coil clockwise (since the thread is left-handed) and remove it from the trimmer. Then we disassemble the coil. It can be assembled with latches or twisted with a lamb. If the coil is latched, then press on the sides on the base of the latches so that they bend and release one half of the coil body from the other. We just unscrew the lamb. There may also be a third type of connection of two halves of such a coil: with it, you need to grab the lower part with one hand, and the upper part with the other, and begin to turn them in opposite directions. When disassembling such a coil, you must also make sure that the spring inside is not lost.
than 200 types of trimmers in one place at the lowest prices. Click and watch
Now, having removed and disassembled the coil, we proceed, in fact, to winding.
How to refuel the gas trimmer
Gasoline-powered lawn mowers are available with two-stroke and four-stroke engines. The first option is much more common. What are the differences between them:
- Trimmers with a 2-stroke motor have a faster response to pressing the engaging lever (for this reason, lawn mowers are mainly equipped with this type of engine);
- A tool with a two-stroke engine will be much lighter and also easier to maintain;
- Fuel consumption of a two-stroke engine is higher than that of a 4-stroke engine with the same power by about 30%;
- A 4-stroke engine is more environmentally friendly, since the fuel in it burns completely and is not emitted into the atmosphere, and its noise level is much lower;
- And the most important distinguishing feature is the refueling: the 2-stroke engine is equipped with one common tank, into which gasoline mixed with oil is poured; The 4-stroke has a separate gas tank and engine oil tank.
For refueling, you must use fresh AI-92 or AI-95 gasoline and high-quality motor oil for garden equipment (manufacturers produce different oils for 2- and 4-stroke engines). Mineral, semi-synthetic or synthetic oil can be used.
The proportion of gasoline and oil for trimmers with 2-stroke engine can be found in the instruction manual for the particular model. Usually it is 50: 1, in some cases a ratio of 25: 1 or 40: 1 is recommended. It is necessary to prepare the fuel mixture in a separate container with exact proportions. Never pour liquids by eye directly into the tank without first mixing them. Detailed instructions for mixing gasoline oil, with and a description, can be found on our website here.
How to put on a belt
If the tool has a shoulder mount, hang it on the shoulder before starting work. The trimmer is fixed on both shoulders if it has a knapsack mount.
The bicycle handle model is held with 2 hands, the D-shaped handle is wrapped around the palm. The belt must be worn so that it is comfortable, then the back will not get tired.
How the trimmer works and how to use it correctly: refueling and first start
Lawn mowers are devices that make it easy to maintain lawns. The question of how to use the trimmer is asked by those buyers who are just going to purchase a garden tool. The industry produces devices of different types, so when choosing, you need to pay attention to their characteristics.