Protect with wax
How to protect after wax casting
Nowadays, many people have begun to understand the methods of magical work. They understand: just removing the damage is not enough. It is also necessary to protect yourself from the next attack. For this, protection is done after damage. He cannot do it for himself. It turns out not a talisman, but another bearer of damage. Therefore, they turn either to specialists or to loving people..
The most common way to protect yourself after damage is to make a talisman. Most importantly, if you start making them yourself, do not forget about love. Any amulet is filled, first of all, with light. And methods are a secondary matter. The amulet should appear for a person immediately after the removal of damage. While the negative in the aura is active, the victim cannot touch the talisman.
Nowadays, many people began to understand the methods of magical work, they understand just to remove damage is not enough
from katechka
Waxing up protection is one of the surest ways to provide yourself with benefits in the form of protection from negative influences. Wax is often used in magic rituals, as it is inherently a unique substance. Today on the website pro-vosk.ru we will talk about how to put protection with wax. Read how to do it. This will help you in many things, find good luck and make a talisman that will help you in all your endeavors. Waxing up protection is not difficult at all. Read the following article on the pages of our magazine.
pro-vosk.ru
Website about waxes and their properties
Protection after casting by grain
Before scoring (rolling, casting), generally cleaning, buy some grain. It should stand side by side in an open container during the ceremony. Once the cleansing ritual is over, scoop up a handful of grains and sprinkle the person from the head..
So say: “I am not sowing a wind, not a storm. I sow good and glory. I am blowing for love, I am blowing for money, I am blowing for happiness! Amen!”. After the first handful, you need to ask a question about the dream of the person with whom the ceremony is being held. Something like this: “What do you want more than anything else?”.
As the answer is received, again a handful of grain is thrown on him. Repeat the above conspiracy. And at the end they add: “As a bird pecks grain, so places will come! Amen!”. And again they ask about the dream, as described. And again they sprinkle the person from head to toe. Everything, protection is installed. It is extremely important to immediately collect the grains and take them to the birds..
Protection after candle casting
Bring consecrated water from the Temple and a candle. As you get up in the morning, take one sip. Pour a few drops into the palm of your hand, wash your face.
Read: “Lord Jesus! By your power, by your will, by your kindness, by your heart, I am protected! Amen!”. So every day, without gaps. And candles are needed in the evenings. You just need to set one on fire and wait, without distraction, until it burns out.
At this time, you can read prayers, talk about life from a positive point of view, do household chores, but without a computer, TV and communication. One candle a night. In a month, if you wish, the ceremony can be continued. But the protection will already be strong enough.
Ways to create protection for yourself:
- with a red thread: tied around the left wrist with seven knots.
- with a double-sided mirror: an instrument is taken, covered with a black cloth and worn near the heart (in the chest area). Mirror protection can also be used for a small child;
- with salt: on Thursday, a crystalline product is purchased, a conspiracy is read over it: “To all the traitors and spoilers of salt in the eyes, scorching fire, hot sand. The all-timers and spoilers of God’s creature will never know, the clouds cannot be opened, the stars cannot be knocked off, the morning dawn cannot be crossed, the young month cannot be locked. According to the same words, and I am a servant of God (his name) not to spoil, not to spoil, not to have a snack, not to distort, so it will always be. ” After that, grains of salt are placed in a bag, which is carried with you..
How to protect with wax
How to put protection against damage is probably the question of many who would not want to become a victim of magical actions. There are several ways, all of them are effective and require only the use of various items. In the first method, you will need a glass bottle, five hundred grams of various metal elements – nails, sawdust, buttons, bolts and others. The main thing is that each of them calmly enter the neck of the bottle. When all the elements are laid, pour cold water into another bowl and add about one hundred grams of salt.
Place all this and let it brew for five minutes. I must say right away that the bottle must be completely transparent. Next, you should pour the liquid into the bottle and at the same time say the following words: “I keep my path across the field, if demons come across to me, let them go to those who do evil on earth, and I keep my path alone.”.
After that, you will need to fill the neck with wax and bury the bottle. No one should know that the ceremony was performed. The action of the ceremony is to drain any spells into the contents of the bottle. It is worth noting that every five years it is necessary to dig up a bottle and replace it with a new one. This is necessary due to the fact that the concentration of negative energy will already begin to exceed the permissible norm..
How to protect yourself from the evil eye and damage, self-evil eye
Protection from the evil eye and damage is necessary for every person. There are practically no people in the world who do not have ill-wishers or envious people. That is why you need to think about protection first. And about protecting yourself, your home and family.
The evil eye and damage are generated by negative emotions, envy and evil intentions. It is not always necessary to carry out some kind of ritual to protect yourself, your home or family from the curse. It is enough just to protect yourself from bad people. It is also worth getting rid of envy and anger on your own, because negative emotions also give rise to problems. They can lead to self-eye.
Self-evil eye is a negative program coming from ourselves. It manifests itself as an unreasonable deterioration in mood, frequent mood swings, anxiety and expectation of something bad. A person feels loss of vitality, depression, lack of sleep, causeless physical fatigue.
How to understand that damage or evil eye is on you
In this case, a person begins to have a black streak in life. He is constantly unlucky, something bad often happens in life. In the family, constant quarrels and conflicts begin. When the family is cursed or damage is lying on the house, it is almost impossible to sleep normally in the room – you have nightmares, it seems that someone is looking at you. Also, animals begin to behave very strangely – they rush to the walls, do not walk into hands, behave apathetically.
How to protect yourself from the evil eye
The best protection is communicating with pleasant people and limiting contact with negative personalities and enemies. But often we are simply forced to communicate with those who are unpleasant to us – with energy vampires, with envious people. It happens at work or school, anywhere. To avoid negative consequences, it is necessary to put on the protection against damage. This can be done with the following things.
Stones-talismans. It is worth highlighting several of the most powerful protective stones: diamond, pearl, moonstone, obsidian, opal. The diamond makes the human energy field impenetrable. Pearls do not allow other people’s energy currents to penetrate into the owner’s aura. The moonstone is a talisman of inner balance. Obsidian helps ward off intentional corruption. Opal protects against stress and self-eye.
Red thread on the hand. Place the red woolen thread around your wrist. This amulet has been used since ancient times to protect against negative energy. Red is a symbol of strength. It activates the protection of the aura and the whole organism. It is worn on the hand, because we first of all touch everything new with our hands. Touch is the best way for a person to get information..
Pin. The pin alone will not help you – a special ceremony will be required. Take a metal pin and keep it on fire. It is desirable that the source of fire was a church candle. After that, read a simple conspiracy three times: “I protect myself with fire, I burn other people’s bad thoughts.” It is better to wear a pin discreetly on clothes, but you can put it in a bag or pocket.
Affirmations. Affirmations are motivating phrases that help a person become stronger internally. They are not only motivating, but also protective. For example, if you say to yourself: “I can survive anything,” “I am strong / strong,” then it will be so. This is the simplest magic of all.
Prayers. Orthodox, Catholic, Muslim – there are many prayers from evil people in any religion. Prayers always help to heal mental wounds and protect a person from the evil eye..
To protect yourself from any attack, read a prayer from enemies and envious people to Saint Cyprian. Prayer words:
“O holy saint of God, martyr Cyprian. I know that they call out to You in troubled moments and immediately receive help from You. Accept from me, an unworthy servant of God (your name), a simple request. Pray to the Lord, asking for me to strengthen my faith and comfort in my sorrows. May He protect me from the attack of evil people and any action. Be, Saint Cyprian, my faithful assistant in the struggle against enemies. Show me your intercession. With Your support, I will walk the earthly path and find myself in the Kingdom of Heaven beside all the saints. Amen”.
For help from enemies, you should turn to the Guardian Angel. Text:
“O intercessor of God, do the will of the Lord and save the sinful servant (your name). Help overcome all trials from adversity, swear words, resentment, envy, flattery, anger and onion. Do not leave me without your support. Amen”.
How to protect your home and family from damage
Icons. Orthodox people note that the presence of icons at home helps to always maintain love and mutual understanding in the family. The most effective icon of all is the image of the Kazan Mother of God. It protects the house from damage, as well as from fire..
Salt. There is a good ritual with salt to protect the house from damage. It is necessary to pour a little salt near the front door – from the outside and from the inside. Further, it is necessary to read a special conspiracy three times: “It will not enter, but everything bad that fate has in store for my family and my house will come out. Let it be so”. The ritual must be repeated every full moon.
Ritual with mirrors. Near the front door, you need to put two mirrors of any size opposite each other, and a lit candle between them. This is done at midnight. When everything is ready, read the following lines: “I call upon the forces of light to help me and my family. Protect my house from any evil, from dangers and bad people. Amen”.
Horseshoe. This is the most famous of all good luck charms, but it can also be used as a protector of your home and family. You need to hang the horseshoe in front of the door, not on the side or directly on it. It is hung for protection only with the ends down.
Plants. Plants help to independently put on the house protection from the evil eye or damage. To do this, you need climbing plants on the sides of the front door. If you live in a private house, then you can arrange them both inside and outside. It can be roses, ivy, cissus, monstera. You can put cacti on the windows so that they do not allow negative energy from the outside to enter. Properly positioned plants will help protect against negative influences..
Animals. A black cat best protects the house from negativity, damage, negative people. This animal is the best protective mascot for the whole family..
Beware of underlays – foreign objects in the house that could be brought in by someone you know. Such things suck the life energy out of people. This leads to illness, serious conflicts, discord. Do not forget about your protection: protecting prayers from ill-wishers and envious people have proved their strength and first aid more than once. Do not forget also that the Most High called us to pray for our enemies, because they themselves do not know what they are doing..
Creating a machine for sawing wood
Two pieces are cut from the corner (45×45 mm). More precise dimensions should be viewed according to the dimensions of the angle grinder gear unit. 12 mm holes are drilled in the corners (an angle grinder is screwed to them). If the factory bolts are too long, they can then be cut off. Sometimes, instead of bolted fasteners, studs are used, this does not in any way affect the quality of the connection. Often, the corners are welded, such a mount is the most reliable.
A special support is made for the lever, the unit is attached to it, for this, two pieces of pipes should be selected so that they enter one into the other with a small gap. And to make the marking more accurate, it is recommended to wrap the fragments with adhesive mounting tape, draw a mowing line with a marker. A cut is made along the mowing line, a pipe element with a smaller diameter should be smaller (1.8 cm). For the inner diameter, it will be necessary to find two bearings that are inserted into a more massive pipe, then a pipe with a smaller diameter is inserted into a pipe of a larger diameter. Bearings are pressed on both sides.
WHY I DON’T USE A GRINDER GUARD?!
The mount is placed in the bearing, it is imperative to put the lock washer in the bolted mount. After the pivot assembly is prepared, a small piece of the corner should be fixed.
The vertical mount for the swivel unit is made from a corner of 50×50 mm, while the segments must be of the same size. The corners are fixed with a clamp and cut.
It is recommended that the corners be drilled immediately, and then with the drilled holes they can be attached to the swivel unit using nuts.
Now you need to figure out how long the lever will be needed – an angle grinder will be mounted on it. A similar action is performed using the selection technology, while the parameters of the impeller should be taken into account. Often, parts are pre-laid out on a flat plane and analyzed, then the configuration and dimensions of the product become clear. The pipe is most often used square with a size of 18×18 mm.
After precise adjustment of all elements, they can be fastened together by welding.
The pendulum unit is easy to place on any plane. This can be a wooden table that is sheathed with a metal sheet. A stiffer fastening is ensured by welding two small fragments into which holes are drilled.
Grinder Safety | How to Properly Use an Angle Grinder
During installation, one of the main working moments is setting an angle of 90 degrees between the plane of the disc and the supporting surface (“base”). In this case, a construction square should be used, which is attached to the abrasive wheel (it is mounted on an angle grinder). Welding a piece at an angle of 90 degrees is easy for a craftsman, it will take a little time.
An emphasis should also be made so that the workpiece is rigidly fixed during operation. A vice is often placed on a flat plane, which provides a reliable fastening. After all the operations performed, a protective coating (casing) should be made. It is recommended to take into account the size of the disk here. Before starting work, an exact template for the future part should be cut out of cardboard..
The protective screen can be made from two pieces of tin. An aluminum corner is attached to one of the blanks, it will allow you to reliably fix the protective screen using a crossbar. Such accessories are necessary for normal operation, since the angle grinder is a tool of increased injury..
Small holes are made on the screen, the prepared fragment is fixed with nuts and bolts. The protective cover can be painted with oil paint, and if done correctly, it will serve for a long time and reliably protect the worker.
The base-stand for the machine is sometimes made of silicate or red brick.
Cutting sheet hoists with an angle grinder
To cut sheet metal, you will need to purchase a special carriage that moves along a guide (shaped square tube).
But as practice shows, the cost of a good carriage is high (more than $ 100), so you can make it yourself. Since this process is rather complicated to describe, you can understand the manufacturing technology of this slider from this video. With the help of the device, you can cut not only steel, but also ceramic tiles and porcelain stoneware.
Please note that a lot of dust is generated when cutting ceramics. Therefore, it is recommended to adapt a dust collector with a nozzle for a vacuum cleaner to the casing of an angle grinder..
Grinding machine for metal elements
There is another option that will allow you to process metal parts. To do this, take profile pipes (2 pcs.), Attach them by welding to a rectangle made of steel sheet 5 mm thick. Holes are drilled in the uprights and arm, and dimensions can only be determined empirically.
Consider the stages of work.
- Lever is attached.
- Spring is attached.
- Holes drilled for bolt fasteners.
- The rod is also drilled (the drill will fit 6mm).
- After preparatory work, the turbine can be mounted on the working plane.
The device is simple in design. It turns out a portable edging machine. In some joints, clamp fasteners can be made, gaps can be laid with wooden dies.
For a more secure stop, an additional corner is screwed on. It is also permissible to attach a small angle grinder to a metal strip (5 mm thick), but it is also advisable to use a clamp fastening.
To remove dust during work, a dust collector is most often used. For an angle grinder, you can make an effective attachment from PVC containers with a volume of 2–5 liters. A frame is made on the bottle with a marker, a rectangular hole is cut in the side. The dust collector is attached to the impeller, an exhaust hose is mounted on the neck.
The gaps can be sealed with a special thermal putty, which is used to seal up wooden windows..
An exhaust device is necessary: it significantly helps in work when an angle grinder is used to clean various surfaces from old paint, insulation, rust, cement mortar. In this case, you can use various attachments with a metal mesh. These works are associated with the formation of a large amount of dust, therefore, personal protective equipment should be used..
Vacuum cleaner k angle grinder
Attachments for an angle grinder greatly expand its functionality, they can be installed on impellers of any size. With the help of simple devices, you can make a cutting unit or a machine for cutting grooves (grooves in concrete), which will ensure the quality of work at the highest level. The need to purchase an expensive professional tool disappears, since a good job can be done with homemade improvised means.
Varieties of devices
Angle grinder attachments exist with a wide variety of functions:
- for smooth cutting;
- for grinding;
- for cutting bars and pipes with a diameter of 50 to 125 mm;
- for peeling old layers from surfaces;
- for cleaning and grinding;
- for polishing;
- chain saw for cutting wood;
- for collecting and removing dust during operation.
These fixtures are also called accessories. They are often purchased separately from the main unit. Some of them can be made independently from available material or old technology..
Plywood
Plywood can be a reliable tool for creating equipment. From several sheets of plywood, fastened together, you can make a mounting table, its thickness should be at least 10 mm. And also plywood is ideal for creating a protective screen or casing. If the material is treated with a special primer, painted with metallic paint, then such a knot will be durable and will serve you for a long time. If the plywood is treated with a primer in several layers (3-5), then it will not be afraid of changes in temperature and humidity. This material has a number of advantages:
- low price;
- good strength factor;
- moisture resistance;
- light weight.
Several sheets of plywood sheathed with sheet metal can withstand high mechanical stress. Such a base is reliable; rather massive working units can be attached to it. At the same time, the equipment will weigh a little, it will be easy to transport it..
For how to make a stand for an angle grinder with your own hands, see the next video.
Angle Grinder Cutting Machine
In order to understand how to make a cutting machine from an angle grinder (angle grinder), you can look at various drawings on the Internet. But they will not help much, since all the sizes of the parts will still have to be selected based on the size of the angle grinder you have. The options for the execution of devices can be both simple and more complex, requiring the ability to handle the welding machine.
Disks.
Always make sure that the disc is inserted correctly. Cutting discs are thin. Thick – for grinding. Do not tempt fate and try to gently grind surfaces with a cutting disc..
I do not recommend placing circular discs on an angle grinder. For cutting wood, there are other machines.
If you do not neglect these simple safety rules and use high-quality discs, then they will not break and fly in all directions. I did not insert photos from the Internet, which happens when the safety requirements are not observed when working with an angle grinder. Look for yourself.
By the way, in addition to the grinders we are used to, there are battery-powered machines, which is sometimes very useful.
Almost every brand that produces power tools has such machines..
Enjoyable and safe work for you!
p.s. And finally,
Maintaining rotation speed.
Some angle grinders are equipped with a system that allows you to maintain the optimum rotational speed of the disc. Those. when cutting material, the speed of rotation of the disc will not depend on the load, with what force you press on the angle grinder. (Naturally, we are talking about pressure within reasonable limits, because it may be unsafe)
Protective glasses.
Glasses or a mask – always when working with the tool. If there is no mask, then the glasses should fit snugly to the face. Glasses – closed type.
Noise protection.
Many people don’t care, of course, but I always use headphones when working. Painfully noisy all those angle grinders.
Disk balancing.
Expensive grinders are able to automatically balance the disc. When cutting, very often the disc wears out unevenly. To avoid strong vibrations during operation, the spindle has a clever bearing that balances the uneven disc.
Protection against accidental activation.
Most of the angle grinder are equipped with a safe power button. To launch such a tool, you need to push the lever forward and only then press the button.
Dust protection
When working on an angle grinder for long periods of time, be sure to use a respirator. You can ordinary
Or use a half mask with a charcoal filter
Protective cover.
The protective cover, in the event of a rupture of the disc, will not allow serious injury, although it does not guarantee 100% safety. And if you look at the photo below, you can clearly see that the presence of a casing does not guarantee one hundred percent protection against sparks. That is why it is also necessary to wear protective goggles, or better a mask..