We select the fishing line for the trimmer right
The question of how to choose a fishing line for a trimmer is very relevant, because neither the passport to the tool nor the packaging of the fishing line indicate detailed features, not counting the size and type of section. You must first find a valid string diameter. this information can be found in the user’s guide to the trimmer. Also, the user can take the standard fishing line from the configuration (in fact, there is always a small segment on the bobbin of a new tool) and measure it with a vernier caliper or a regular ruler.
In the absence of both the first and second, suitable sizes can be found on the tool itself.
- Electronic trimmer up to 500 W. 1–1.6 mm. Which fishing line for trimmer is better. Country. Main. Used for mowing grass.
- Electronic trimmer from 500 W to 1 kW. 2–2.4 mm. It will overpower a small narrow grass and grown weeds of the middle diameter.
- Petrol trimmers and lawn mowers. 2.4–3.2 mm. Thick fishing line simply cuts dry trunks, weeds, thick and dense thickets.
A fishing line with a trimmer thicker than 3.2 mm across is used occasionally, only on certain types of massive lawn mowers.
Conclusion: the more powerful the equipment. the thicker the equipment. If in doubt, you can purchase the equipment of the smallest diameter. If you use a fishing line for a trimmer with a diameter greater than the specified one, it will often be wound on a reel, it is more terrible to "go". Also, the introduction of a very thick string can exert an excessive load on the engine, which leads to rapid overheating.
The standard package holds 15 m of fishing line, but the rarest bobbin is designed for this, usually it can be wound 7-7.5 m, in other words half. There is another type of packaging. “bay” or “coil”, here the length of the string varies on average from 250 to 515 m.
It is also worth paying attention to production date. The fishing line should not be very old: over time, nylon dries up and becomes very brittle. In this case, there is a way out. to soak the forest in water for several hours, but it will not work to fully return the elasticity of the string.
There are a lot of types of fishing line, you can not pay attention to the color. as there are no such common “color-characteristic” standards. The principal factor becomes the type of cross section of the string, it is chosen depending on the type of grass.
- Circle. universal fishing line. Smooth when mowing is characterized by an excessive level of noise, twisted, on the contrary, mows quieter, but is consumed faster (like any type of twisted fishing line).
- Square or Polygon. Such fishing line more effective than round. sharp corners are faster and cut trunks better.
- Sprocket, ribbed or twisted square. It has the highest efficiency and speed of cutting.
It’s important to know! It is strictly forbidden to use metal wire, cables or rods instead of fishing line. Which fishing line for trimmer which fishing line for trimmer is better, 3.2 mm is used for. Which fishing line for trimmer is better. Country forum (main). Association of lovers of country work and rest. Such equipment easily cuts even leather shoes and can seriously injure the operator.
Trimeric fishing line. In frame: Fishing line 2.4 mm / 309 m section star, Coil, 24309S.
Raw materials for the production of fishing line for trimmer serves nylon (polypropylene or polyamide). a strong, lightweight, wear-resistant and cheap material. In order to reduce the cost of production, some manufacturers add cellophane to the composition. such a fishing line wears out faster, is less resistant to overheating. This is one of the main differences between a cheap and expensive string of the first kind.
In a fishing line with a thick section (3 mm or more), a graphite or steel rod is added, which at times increases the efficiency of cutting any type of grass. The iron base improves the aerodynamic characteristics of the fishing line, so it cuts the trunks better. Reinforced fishing line is also found, where iron particles are moderately distributed throughout the string. The addition of iron fractions gives the fishing line additional strength and wear resistance. A two-component string is more expensive than ordinary nylon, but it is mainly obtained for specialized street improvement works, for example, utilities.
Reinforced fishing line for trimmer
Products of the best manufacturers of trimmer fishing line are divided into two types:
- with a good price-quality ratio;
- with the longest service life.
-
Champion. Offers the widest selection of fishing line from round nylon to one-piece two-component cord. Which fishing line for trimmer is better. According to users, Champion is not the worst fishing line in the ratio of price and quality.
Echo produces benign fishing line of various cross-sectional and cross-sectional shapes.
A competent decision will be the choice of the shape of the cross section of the fishing line, based on the intended goals. Conventionally, all types of cleaning work on the site can be divided into three huge groups:
- constant care of the lawn and garden paths;
- repeated cleaning of the area (approximately once a month);
- removal of dead wood, weeds, perennial thickets of grass and shrubs.
To maintain the lawn in an appropriate form or to remove dry vegetation, a fishing line of any kind is suitable, but it is better to choose a round one. When choosing between ordinary or twisted, keep in mind that twisted emits less noise during operation. Quiet vegetation is cut by a round fishing line with longitudinal or transverse grooves. It is also worth paying attention to the tool for cutting grass. Which fishing line for a trimmer is better than a fishing line with a trimmer thicker than 3.2 mm, which fishing line is better. If you are the owner of a gasoline unit, then the noise level of a running engine will easily block the buzzing of equipment on the grass.
Square or polygonal fishing line optimal for removing raspberries, thick weeds, dense thickets. The figured string shows good aerodynamic properties: it perfectly cuts almost any grass in various conditions. Minus the "star" or "ribbed" section. it wears out relatively quickly. The presence of grooves reduces the thickness of the snap, which leads to kinks. But the figured fishing line is very effective, the user does not have to process one area for a long time.
Such a fishing line is recommended to be used strictly for its intended purpose.
A two-component fishing line, reinforced or with a core made of metal, is usually very strong and thick, it is able to cut not only fine grass, but also vegetation with a diameter of up to 2-3 cm. A strong string is used to cleanse the local area, remove thickets along the roads. In special cases, a two-component fishing line is useful if you need to quickly ennoble a neglected area with tall, perennial thickets of grass of various kinds.
A definite answer, which fishing line is better, no. Which fishing line for a trimmer is better: which one to choose. There are universal types (round), and there are specialized types (star). According to experienced gardeners, the right choice of cross-sectional shape of the line will help increase productivity and reduce the processing time of the area by about a quarter.
How to change the fishing line in the trimmer and which is better to choose
Since we saw the choice of the trimmer in the previous article, now we will tell you how to correctly trim the trimmer with a fishing line, and which is better to choose based on the criterion of work.
After you have purchased the trimmer and started to use it intensively, at some point the question arises of replacing the fishing line, since this is the most wearing element in the tool, then the saturated operation of the trimmer will lead to frequent replacement of consumables.
Common type fishing line, which is suitable for virtually all types of coils. round cord. This is an ordinary fishing line, suitable for mowing juicy grass, but it will be much more difficult to mow dead wood with it, and even more so it does not cope with the bush.
Usually, the diameter, which you can mow young grass, does not exceed 1.6 mm. The thicker the thread, the more coarse weed it can overcome.
there is fishing line with ground edges in the form of an asterisk or square, this option is more adapted to mowing dry grass just due to the existing sharp edges, but its disadvantage is greater wear and tear and is inferior in strength to round cord.
There are fishing line with improved aerodynamics with corresponding dents, scales and notches, a similar product produces less noise, but they are used only on lawn mowers, since the exit of such a thread from the spool is difficult, they are used in most cases with discs in which segments are inserted. The disadvantage of such a product is its fragility.
In most cases, in gas trimmers with an engine capacity of more than 1.5 hp. use cords with an iron cable inside. Such a thread is perfectly suitable for mowing dry grass and small shrubs. The presence of a core positively affects the wear resistance of this material. The disadvantage of such a cord is its price, which is significantly higher than the listed opponents.
The video carefully shows how to reel fishing line to the reel trimmer or lawn mowers. Refueling mowing.
Unisoo School, video tutorial on how to choose and work with a modern landscape gardening.
In order to win line, will need about 10-15 minutes. What is a trimmer coil? Plastic case with a cassette inside, on which there is a special hook for comfortable winding fishing line. Almost all the coils of the trimmers have a similar principle of fastening, this is the central screw-button, when pressed, it becomes possible to pull the fishing line of the required length. Unlike electrical tape, backing from fishing line dries faster and how many meters have already been lowered or. The photo below shows some examples of different coils for trimmers.
The bobbins of trimmers, the motor of which is located near the ground, have a different mount to the axis of rotation, they have two buttons on the spool located on the sides that need to be pressed, otherwise the replacement of the thread is no different from other cassettes.
The principle of proper winding of the fishing line is similar in all of the above cases, so for example, consider the standard version with two antennae.
To remove the reel with fishing line, it is necessary to unscrew the screw located in the center, but note that the thread there is left, so you have to turn it clockwise, this is done specially so that during operation it does not open under the influence of centrifugal force.
Next, using a screwdriver, disassemble the head and take out the reel, on which the fishing line is directly wound. Having measured the necessary length and folded in half, you need to fill the fishing line into the reel, removing, in the end, its ends opposite each other (for this there are special slots for fixing).
After that, it is necessary to assemble the head in the reverse order by threading the ends of the cord into two corresponding holes.
If you have doubts or it’s not entirely clear how to charge the fishing line to the trimmer, we recommend watching the video: how to wind the fishing line into the lawn mowing properly. In this video, the instructor will open the trimmer head in steps, measure out the required amount of fishing line, usually from two to four meters, and will demonstrate assembly and installation on the trimmer.
The fishing line in the trimmer head can end at the most inopportune moment when the work is in full swing. So that replacing the fishing line does not take much time and does not have to understand the instructions for a long time, we recommend that you theoretically familiarize yourself with this process in advance. From our article you will learn all the intricacies, starting with the choice of consumables and ending with winding on coils of various types.
Fishing line selection
For each trimmer, the manufacturer recommends a fishing line, or cord, of a certain diameter. a coil is made for it. It can be from 1.2 to 4 mm: you need to look at the instructions, what sizes of fishing line are acceptable for your tool. For example, for many trimmers the maximum value is 3 mm (recommended for hard grass). a thicker cord cannot be set. Thin fishing line with a diameter of 1.2. 1.6 mm is suitable for mowing young, soft vegetation. Also, when choosing, pay attention to the structure of the cord: round is the most durable and suitable for coarse grass, curly. for soft, twisted or notched. for thin stems. Depending on whether the grass grows on the plot. lawn or weed, buy the appropriate supplies. The length of the winding can be from several tens to several hundred meters, its price depends on this. You need to proceed from the amount of upcoming work. If the trimmer is used in a private household, there is no need to buy a skein over 100 m.
It’s important to know! Only buy branded fishing line recommended by the trimmer manufacturer. It is made of high-quality materials and has durability. it will cut grass very well and not wear out so quickly.
For one refueling of fishing line into a bobbin, a length of 2 to 4 m is necessary. it all depends on its thickness and manufacturer’s recommendations. If you wind more, the movement of the fishing line will be difficult, and in the process of work, problems may arise with drawing new ends. Unwind the required amount and cut with a knife.
Helpful advice: place a piece of cord in water for 30 minutes, then it will become more elastic and stronger.
Spit removal
To insert the line into the trimmer head, you must remove it from the tool. Depending on the design, this can be done by pressing the tabs or spinning the lamb. Pay attention to the direction of the thread. right or left. and rotate the lamb depending on this. Typically, the direction of rotation is indicated by an arrow on the body of the trimmer head. It is recommended to perform this operation with gloves. fingers will not slip, and hands will not get dirty.
Dismantling the mowing head
The fishing line is wound on a spool, which is hidden in the body of the trimmer head. To get to it, you need to disassemble the item. There are latches on the case, when you click on them, the cover of the case is easy to remove. Sometimes disassembly is carried out by untwisting the case.
Be careful! Remember in what order the elements are installed, how the spring and the fixing screw are located inside the head. Carefully fold all the parts in one place so that nothing is lost and there are no problems during assembly.
Winding fishing line
Trimmer heads vary in structure, type of reel and the principle of pulling fishing line. Having disassembled the case, you will see the spool and determine what type it belongs to. There are products with a side in the middle that divides the reel into upper and lower parts for each end of the fishing line. In products without it, the winding of the fishing line is continuous. To make the process more clear, we suggest using the table.
Winding fishing line on reels of various types
With dividing flange
Without dividing side
We described how to wind a fishing line into a trimmer coil with two antennae. This is the most common option. But there are other ways. For example, if there is one antennae in the mowing head, then winding is carried out without folding the fishing line. Rotate in the direction indicated on the spool housing, and the free end of the cord is temporarily fixed in the slot on the housing. For trimmers with four antennae, four short segments are used as consumables, which are inserted in turn into the holes of the already assembled head.
Helpful advice: when winding fishing line, proceed carefully, do not pull it so that it does not sit very tightly in the reel. It is necessary to ensure its free movement for subsequent stretching.
Trimmer Head Assembly
After the fishing line is wound on the spool, it is necessary to assemble the body. Position the coil so that the ends of the fishing line can be pulled into the outlet openings of the trimmer head. The slots in the spool where they were temporarily inserted will not allow them to slip out. If there are no such slots, hold the ends with your fingers when you place the coil in the housing. After pulling the free ends into the outlet openings, close the lid and fix it with latches or tighten. Place the mowing head on the trimmer and pull the ends of the fishing line to the desired length so that they do not touch the protective cover during operation. Done! You can get to work!
How to wind a fishing line on a coil of lawn mowers or trimmers. Change of fishing line on the lawn mowing. Features refueling fishing line.
Subscribe to the channel! And we will teach you everything)))
Overview of self-winding coils (spools) for lawn mowing. Design, mechanism of work. How to reel a fishing line.
The video carefully shows how to reel a fishing line on a trimmer reel or lawn mowers. Refueling with mowing line.
How to install a 2-blade knife on a Stihl FS 55 lawn mower. Video abstract, how to change a benz mowing head.
How to wind fishing line on various coils in lawn mowers. Filmed this video on demand. I thought about what to demonstrate.
Installation of a Chinese gearbox on a Husqvarna 128R lawn mower, 26 mm rods. and an iron shaft of 8 mm. Drive shaft 44.
Rapid MKG-1. very comfortable mowing head for fishing line for small areas. With all this, long-term and easy.
Find out how easy it is online on our website: http://pila.prom.ua Subscribe to our YOUTUBE channel! Always glad to cooperate!
How to wind a fishing line on a reel from a lawn mowing # winding # fishing line # a reel # lawn mowing # a lawn mowing # reel # fishing line # trim.
Friends in this video you can see the spools for lawn mowers of various manufacturers and different price categories.
When in the electronic line with a different gasoline trimmer, the line for cutting the grass ends, of course, change it.
Overview of the Husqvarna 128R Lawn Mowers. After the acquisition, the braid worked 1 season without any complaints, mowed as little.
I SUBSCRIBE to your channel mutually. Trimmer. How to rewind a fishing line VK https://vk.com/umiiron.
Also a small crash test))) The lowest prices for spare parts for lawn mowers: http://pila.prom.ua Subscribe to ours.
How to choose the right reel with fishing line for lawn mowing or lawn mowing in Ukraine. Mowing trimmer head.
This video clip is only for a pleasant demonstration of the use of STIHL products. He is not capable.
The video carefully describes and shows how to choose the right line and wind the lawn mowers in a different trim.
How to wind the cutting cord onto the lawn mowing coil (trimmer) yourself
Methods for changing fishing lines on various mowing heads.
LookTool.ru even more info here. How to charge a trimmer coil with fishing line without the help of others, which one.
True refill trimmer reel (lawn mowing) fishing line. How to disassemble the reel and how much to wind the fishing line.
Trimer fishing line. http://www.kuvalda.ru/catalog/7565/ In the frame: Fishing line 2.4.4 mm / 309 m section star, Coil, 24309S. PRORAB Fishing Line Oregon Red.
Refueling fishing line reels for mototrimmer, lawn mowers from the Company Meserias.md.
Husqvarna 125R- 12 years of operation! A detailed video about troubleshooting which caused a loss of power.
Changing the line in the Husqvarna trimmer is simple and straightforward. A large selection of trimmers on our website representative of the company.
Video: How To Put A Cutting Disc On A Husqvarna Trimmer
The video carefully shows how to wrap fishing line on a trimmer reel as it is also called lawn mowers. Refueling with mowing line.
We determine in which direction the head of the trimmer is spinning and in which direction to reel the fishing line if it has been erased.
Shows the process of disassembling the reel and refueling fishing line (video)
In the current period on the web there are a huge number of spare parts for chainsaws and lawn mowers, but not counting as downloaded.
We try a milling cutter in business. The first part of the trimmer review is here: http://www.youtube.com/watch?v=hZvjDK5l744 My VK page.
Overview of the Husqvarna 143r2 Lawn Mowers Gardening, mowing grass, clearing plots here and MO 89162572603.
Nowadays, the gas trimmer has gained the status of the 1st of the main tools in the arsenal of summer residents. All this is logical, because a motorized spit allows you to quickly put your personal plot in order. But when it happens that the trimmer does not start on hot and in addition on cool. In such situations, it is necessary to determine the cause of the malfunction without the help of others. Next, find out [.]
Fishing line and reel for trimmer: how to make the right choice? Probably everyone who has a garden in their area faced the problem of mowing grass. Today there is an excellent way to quickly and efficiently cut the stems of plants. the use of an electric trimmer, which works due to a special fishing line at a speed of up to 8 thousand revolutions per minute. This speed allows [.]
Has the gas trimmer broken? DIY repair is possible! Gasoline trimmers are absolutely indispensable for the elimination of weed thickets in the backyard, as well as for harvesting hay. Yes, as a grandfather “Lithuanian,” they also showed themselves to be indispensable assistants. There is only one problem: even the old braids had to be repaired after the season. What to do when the gasoline broke [.]
In fact, every gardener who wants to have a beautiful lawn needs to know how to wind the line onto the trimmer.
The trimmer is one of the main lawn care tools in the garden. Therefore, it must always be operational. From time to time you have to change certain elements of the device. For example, it’s good for gardeners to know how winding fishing line on the trimmer.
So, in order to change the main cutting element, you must first select it correctly. In principle, in the annotation to the unit the line diameter should be indicated, which should be used in it. The smallest value is 1.6 mm and the largest is 3.2 mm. A better option would be fishing line 2 mm wide. With all this, you should pay attention to the power of the device.
If you get the right cutting element, try to install it correctly. Before wrapping a fishing line on a trimmer, consider its cross-section (square, round, with pointed edges). Also remember that you can only use fishing line to mow grass.
So, in order to replace the thread, you need to disassemble the trimmer. There is nothing difficult about this. You just need to unscrew some fasteners and remove the cover under which there is coil. We need to remove it. Wind up fishing line on the trimmer reel is very simple. To do this, you will need about 5 meters of material, and on it you will need to mark the middle.
The video shows in detail how win line on the trimmer coil or lawn mowers. Refueling with mowing line.
Now inside the reel you will find a bobbin with a slot, into which you need to insert the fishing line. After that, we begin to wind it in the direction indicated by the arrow on the body. Next, the bobbin is inserted back, and the ends of the thread are threaded into the holes on the sides of the spool.
Before you wind the line on the trimmer, pay attention to the fact that the coil can consist of two parts. In this case, one part of the thread is wound on one side, and the second on the other. After that, it is necessary to install the coil back and fix the cover. It should be noted that it may have a left-handed thread. This is done so that the lid could not unscrew and pop off the device during operation.
Before winding the fishing line on the trimmer, you should decide on the system for feeding it: automatic, semi-automatic or manual. The second option is the most optimal. Naturally, all work should be done very carefully and carefully so as not to injure your fingers. In addition, before replacing the fishing line in the trimmer, it is necessary to clean the device from the remains of grass, dust, dirt and other debris.
In principle, there is nothing complicated in doing this procedure. However, it almost never signs in the instructions for the device, so most users have to guess for themselves how to make a replacement. The main thing is to follow the direction of the winding, which is indicated by the arrows on the bobbin and reel. Naturally, one should not exert much effort to twist the apparatus so as not to break it. However, the fasteners must be strong so that the lid or reel does not fall off during operation. If you are not confident in your abilities, use the services of a knowledgeable person.
Found cheaper? Get a discount!
Lightweight portable trimmer Husqvarna 128R Useful in household and gardening. Light weight (5 kg with a cutting nozzle) and the simplest start-up are designed for ordinary users who have no previous experience with lawn mowers.
The power of the 0.75 kW gasoline two-stroke engine is enough for mowing the lawn, grass and small shrubs. The working width of the trimmer is 45 cm.
Starts fast (Husqvarna’s patented Smart Start® system), has a fuel boost function and an auto-return switch. Adjustable handle and comfortable straps on both shoulders allow you to "fit" the device for your physique, thereby reducing the load on the hands and shoulder girdle.
The 128R model is the most compact (due to the small size of the fuel tank), easy to carry and transport, and differs in a modest fuel consumption. The trimmer is equipped with a knife for grass and fishing line, a protective cover.
Please note: the trimmer does not work on clean fuel, but on a mixture. It is recommended to use only genuine Husqvarna oil in a proportion of 1:50.
Ergonomic handle Convenient handle design. Tap ‘n Go trimmer head The Tap‘ n Go trimmer head provides quick and easy cord feed.
The Husqvarna 128R lightweight portable trimmer is useful for household and garden care. Light weight (5 kg with a cutting nozzle) and the simplest start-up are designed for ordinary users who have no previous experience with lawn mowers. The power of the 0.75 kW gasoline two-stroke engine is enough for mowing the lawn, grass and small shrubs. The working width of the trimmer is 45 cm. It starts quickly (the patented Husqvarna Smart Start® system), has a fuel pumping function and an auto-return switch. Adjustable handle and comfortable straps on both shoulders allow you to "fit" the device for your physique, thereby reducing the load on the hands and shoulder girdle. The 128R model is the most compact (due to the small size of the fuel tank), easy to carry and transport, and differs in a modest fuel consumption. The trimmer is equipped with a knife for grass and fishing line, a protective cover. Please note: trimmer does not work on clean
The trimmer is the most common unit used for cutting grass and cutting small bushes. This unit is notable for its ease of maintenance, simple operation during operation, and even women can cope with it due to its low weight. It is no secret that for the high-quality performance of mowing grass, the correct selection of a cutting tool is required. As the last in trimmers, special cutting nozzles (discs, knives) or trimmer heads with fishing line inside are used. Nozzles and fishing line is a consumable tool, but if the knives can be sharpened, then when the fishing line is used, it needs to be replaced. In this article we will tell you as much as possible about how to replace the fishing line correctly.
The grass mowing head is a cylindrical body in which a reel (bobbin) with a fishing line (cord) tucked into it is inserted. This design can be installed on both gasoline and electric trimmers. The heads differ in the method of filling and feeding the cord and there are 3 types.
- Automatic. Cord feed is performed after the user reduces engine speed. Although automatic feeding of fishing line is convenient if large volumes of work are performed, such bobbins have one drawback. high thread consumption.
- Semi-automatic. The use of this type of head does not require the user to perform complex manipulations. The principle of their work is arranged so that the cord is automatically extended at a time when the device is operating at full speed. It is enough to lightly tap the trimmer head on the ground (this removes the cord lock), and the fishing line is pulled out of the bobbin by centrifugal force, and then cut to the desired length with a knife located on the protective cover.
- Hand held. To lengthen the cord requires stopping the machine, after which the fishing line is pulled by hand.
Based on the above, semi-automatic bobbins are the best option. It should also be borne in mind that the coils for the trimmer are single-string (used only for trimming grass) and double-string, which are used to mow tall grass and small, with thin stems of shrubs.
Before starting the process of replacing the cord, users of trimmers need to remove and disassemble the coil. Consider how to do this.
The mowing head of the trimmer consists of several parts: casing, springs (not on all models), bobbins with cord and covers.
Attention! Before proceeding with any maintenance of the electrical unit, it must be disconnected from the mains.
In trimmers, 2 options for attaching the mowing head are most often used.
To remove the trimmer head, you will need it complete disassembly.
- To remove the cover that covers the inside of the head, you must press on the tabs (latches) located on both sides of it.
- After removing the cover, you will see the spool, which must be removed from the housing. In some coils, a spring is installed under the bobbin, which must be carefully pulled out so as not to lose it in the grass.
- After removing the bobbin, in the center of the case you will see a screw with a slot for a Phillips or flat head screwdriver. It is possible that there may be a bolt under the hexagon or nozzle “asterisk”.
- Using a screwdriver, selecting the required bit (nozzle), you need to unscrew the bolt (counterclockwise).
- After removing the fasteners, grasp the body of the part and swinging it in different directions, remove it from the gearbox shaft.
In this embodiment, the head is screwed onto the gear shaft. To take it off, you need this lock the shaft. To do this, in such trimmers, for example, in Huter and Champion devices, a hole is provided through which you can insert either a thin screwdriver or a metal rod.
So, to remove the bobbin, follow 2 simple steps.
- Insert a screwdriver into the hole and lock the shaft.
- Grasp the head housing and start twisting it clockwise. Turn in this direction for the reason that the thread cut on the shaft is left.
Depending on which trimmer model is used, the type, thickness and length of the fishing line are selected. The diameter of the cord can be from 1.2 to 4 mm. It is not difficult to guess that the thicker you fill the cord, the more rigid and thick grass it can cut.
In most cases, a universal fishing line with a diameter of 2 mm is used.
There are 3 ways to find out what diameter of fishing line can be used on your mower.
- View information about the thickness of the cord in the instructions for the device.
- Look at the bobbin itself. It can be marked with information about the possible diameters of the fishing line.
- Insert the fishing line into the outlet. If it easily passes into it, then a cord of this diameter can be used.
The line is wound on a reel located in the mowing head. Therefore, you must first open it (this was discussed above). There are 2 ways to wind the cord.
In order to correctly determine how many meters of fishing line is needed for a particular reel, it is necessary to wind it on a bobbin so that the coil does not exceed the diameter of the sides. If the fishing line peeks over the edges of the reel, you cannot insert it into the casing. After you have decided on the length of the material, it must be loaded into the bobbin, so do the following.
- Necessary fold the fishing line in half, so that one end of it is 10-15 cm longer from the other.
- Please note that the bobbin is divided into 2 parts by the central side, from which charging begins. Find a groove on it and insert a cord bent in half into it, with a little effort.
- It is very important to identify, in which direction is the fishing line wound to the reel. If you look closely, you can find an arrow on the bobbin or an inscription with an arrow indicating in which direction the winding should be carried out. There are times when there is no arrow on the reel. In such a situation, you can look at the arrow drawn on the mowing head and wind the cord in the opposite direction.
- Winding should be carried out carefully, coil to coil, with maximum thread tension.
- After the laying of the cord is completed, you will need to first fix the short end of the fishing line by inserting it into a suitable diameter groove on the side of the reel.
- The second end, the one that is authentic, is mounted in a groove on the opposite side of the bobbin.
- After fixing the fishing line, cut off its ends, leaving allowances of about 10 cm.
- Next, you need to install a seasoned coil in the mowing head. To do this, by inserting and pulling the thread into the outlet openings of the head, place the bobbin in the casing, and then, after applying the required force, pull the fishing line out of the fixing grooves and tighten it.
- Now you can put on the cover and fix it with latches.
In some coils, a second method of securing the cord is provided: 2 pieces of thread can be charged, instead of one folded in half. Replacing the fishing line occurs according to the following algorithm.
- Before changing or charging a new thread into a spool, determine how many meters it will be required in the manner described above.
- Bend one end of the cord in the form of a hook.
- Locate the hole at the bottom of the bobbin to secure the fishing line, and insert the end of the thread bent in the loop into it.
- It is required to wind the cord according to the direction of the arrow to the required level not exceeding the diameter of the coil.
- Do the same for the second bobbin slot.
- Assembling the head is no different from the method that was given when refueling the bobbin was considered with a doubled piece of fishing line.
For Shtil lawn mowers There is a very simple and quick way to replace the fishing line without disassembling the mowing head, which you can familiarize yourself with by watching this video.
The ends of the cord sticking out of the holes in the casing can be cut to the required length already when the part is installed in the trimmer. There are two ways to do this:
- turning on the trimmer (during rotation, the ends of the fishing line are cut off on a knife fixed for this purpose on the protective cover);
- by cutting off the excess ends with scissors so that they do not touch the housing body.
The second method is used if it was necessary to put a cord of large diameter, and a cutter cannot shorten it.
If the thread was charged into the mowing head, but the length of the protruding ends of the cord is insufficient, then they must be lengthened before starting the machine. this applies to the head with manual adjustment. However, there are cases when using a semi-automatic mowing head, when due to the insufficient length of the protruding ends of the cord, they do not automatically extend. In this case, it is necessary to turn off the unit (it is absolutely necessary to pull the plug out of the socket on the electric apparatus), manually press the button located at the bottom of the part, and pull out a little fishing line. After this procedure, the cord will again be able to extend due to centrifugal force, if you set the maximum spindle speed.
No matter what thickness you put the line, you should remember: in order not to interrupt the work and not change the cord, you should avoid areas where the working tool can touch hard surfaces (stones, curbs, thick dry branches, etc.).
Many users of trimmers are wondering: what can replace the default cord used in this kind of apparatus? They begin to conduct unsafe experiments by installing metal or copper wire, metal cables or strings, as well as ordinary fishing line in the mowing head.
If set instead of fishing line metal cable, then the trimmer turns into a dangerous device not only for the user, but also for others. This fact is explained by the fact that during operation of the unit, the steel cable will gradually work, its ends will unravel, and small pieces of wire will fly apart in different directions at high speed.
A similar thing happens when using steel or copper wire, only with the difference that the pieces that come off will be larger and can cause serious injury.
And if you accidentally hook your own or someone else’s foot while operating the machine with a steel cable (wire), then a strong and deep cut of the tissues, and in some cases amputation of your toes, is provided. It is not in vain that the manufacturer uses nylon for these purposes, since it is quite light and durable, and when detached it does not fly away and cannot cause injury.
Use fishing line in the trimmer instead of the standard one, of course, it is possible, but this will add you unnecessary trouble, because it wears out quickly, breaks, mows slowly and is not suitable for cutting hard grass. In addition, during the work, a lot of time is lost in order to replace a broken tool more than once.
In practice, the installation of an ordinary fishing line is justified if the user is going to mow the grass near the fence, especially if he is from a netting net. In this case, in order to protect the standard, and sometimes expensive cord from wear, it is changed to a fishing line, which is not AL-KO. Usually, in order to change the cord to the fishing line, it needs to be selected with the greatest thickness. 2-3 mm.
When refining a garden plot, park areas and other places where it is necessary to mow various kinds of plants, it is often necessary to change the cutting tool in the trimmer. This is dictated by the fact that the standard cord installed in the mowing head can only cope with herbs. But when a shrubbery or young shoot of trees appears on the way of the worker, the line cannot cope with such a task, and it needs to be replaced with a more effective cutting tool.
Manufacturers of trimmers provided such situations, and supplemented their products with a mass of nozzles in the form of knives with several “petals” or in the form of disks similar to circular saws.
If you replace the fishing line with a knife with several “petals”, then with such a tool you can mow both tall grass and plants with thick and dry stems. And changing the fishing line to disk, the user has the opportunity to lawn mowers to cut shrubs or small trees.
Knives and wheels are installed according to the following algorithm.
- The first step is to remove it by locking the shaft, the mowing head (turn clockwise) or the nut with the boot if the unit has not been used yet.
- Set the saw or cutting knife so that they are put on a small ledge (bushing).
For a better understanding of the tool change process, you can watch this video.
Users of trimmers, both gasoline and electric, sometimes have problems with the cord. “Advanced” owners of mowers can easily cope with the difficulties encountered, understanding why this is happening, and for beginners, this is a problem that does not have a rational explanation. But in fact, everything is solved quite simply. The most common problems that happen with fishing line are as follows.
If the line is often torn, the following reasons can cause it:
- stones, small branches and other solid obstacles come across in the grass;
- the user mows the grass right next to the fence, and if it is mesh, it breaks the “antennae” even faster;
- poor quality of the cord (it is recommended to purchase high-quality);
- the outlet openings in the mowing head are worn out, due to which the fishing line is erased against the sharp edges of the bushings and breaks off (a complete replacement of the part is required).
Basically, a cord ends quickly if often pounding the ground with a semi-automatic head or push it down hard. The reel is unlocked, and the fishing line, lengthening, is cut with a knife. Another reason that the cord ends quickly is the improper use of the machine with an automatic head: when mowing, the user often drops engine speed. But as we remember, the automatic head is designed so that it is with each decrease in speed that a new portion of fishing line is fed, so it is quickly consumed.
It happens that the thread is unwound if in a semi-automatic head the spring has loosened. The fishing line is constantly extended and trimmed with a knife mounted on the casing, which increases its consumption. To check this, remove the cover and turn on the unit. If the fishing line “climbed”, then you need to replace the spring.
The reason that the cord unwinds after starting the unit can also be the weakening of the spring inside the head. In addition, there are times when the mowing head scatters when the unit is turned on, and the spring installed in it is lost. Inexperienced users do not notice the absence of a spring and assemble this unit without it. Therefore, the cord does not hold, and flies out under the influence of centrifugal force.
An automatic or semi-automatic head should feed the line without stopping the unit. But if it does not come out, then the reasons may be the following:
- incorrectly wound fishing line in the reel, because of which the latter does not spin;
- the cord is wound unevenly, and the thread can get stuck between turns (the thread should be wound carefully, turn to thread, without distortions);
- too short ends of the thread come out of the holes, as a result of which there is not enough centrifugal force to extract them, and the fishing line is not supplied (it is recommended that the cord length is always adjusted before starting the unit, pulling it slightly);
- the fishing line stuck together (to be discussed later).
This trouble is most often due to use of low-quality cord. When the machine is operating, the trimmer head heats up, and the poor-quality fishing line in it melts, sticking together. Also, sintering of threads occurs when a fishing line meets a solid obstacle. In this case, a sharp braking of the cord occurs, after which it is pulled into the head, where it is attached. Some owners of the units recommend lubricating the cord with mineral oil or spraying it with silicone spray after winding on a bobbin. Others advise winding less thread on a bobbin. But it is better to immediately buy a quality product, in the manufacture of which the manufacturer took into account the head overheating factor, and the thread will not stick together.
A gasoline or electric trimmer is an indispensable assistant in the arsenal of a modern summer resident or the owner of his own house.
Thanks to these garden devices, you can easily mow down even a large garden plot. After acquiring this tool and doing a few tricks, many people think about how to wrap the fishing line on the trimmer coil correctly. For an inexperienced user, the first operation to replace it will seem problematic and time-consuming, since developers often do not fully reflect the instructions for replacing the fishing line in the instruction manual.
Prior to the winding process, it is necessary to remove the reel with fishing line from the housing. Depending on the manufacturer, power and type (electric or gasoline), there are three structural types of trimmers:
-
Compact electric trimmers.
In such a model, it is possible to install a knife. Removing the coil in such models is done by means of two keys recessed into the coil body. To install the trimmer knife, it is necessary to combine the hole of the bobbin and the rod, and then insert the device in the form of a steel pin (screwdriver, iron bar). After fixing the coil, it is easy to unscrew the housing by hand clockwise.
The measured and accurate dismantling of the spool from the spit reel makes it possible to go directly to the winding of the fishing line. The design features of the head, the number and location of the fixing holes dictate the sequence of actions when performing this operation, and also determine the methods used. Today, there are several varieties of coils, depending on the number of antenna line fishing line and methods for refueling it:
- Trimmer head with one working antennae;
- A bobbin with two antennae fishing line;
- Auto winding reel.
Single-mustache lawn mowing coil
Many owners and specialists note the simplicity of operation and refueling reels with one mustache. Depending on the manufacturer, the length of the fishing line can vary from 2 to 5 meters. The end of the line is inserted into the head in a special technological groove or hole, and winding is made in the direction opposite to the working rotation of the bobbin. Most coils on the outside of the case have marks in the form of arrows that indicate the direction of movement of the trimmer bobbin.
After winding, you need to leave a free end of 15-30 cm to enhance the centrifugal force, which is crucial when removing the trimmer line in automatic and semi-automatic reels. Pass the left end through the working hole of the coil and assemble the head.
Two groove head
After removing the spool from the coil body, we determine the number of streams for winding fishing line (1 or 2). There is no fundamental difference between the reels with one and two grooves, but with careless refueling in the twin groove, there are problems with operation. In view of the likelihood of weaving adjacent tool strings, a situation may arise when it is impossible to remove new ones after wear of the working antennae.
Regardless of the number of streams for refueling, a fishing line from 1.5 to 3 meters long is taken. Winding must be done in the direction opposite to the rotation of the head, since winding in the direction of travel will cause the line to not be removed from the reel. After the fishing line is tucked into the trimmer coil, free ends (15-30 cm) are threaded through special holes. Next, we collect the head in the reverse disassembly order and check the performance. Do not worry if the ends of the two antennae are very different in size, because when you start the trimmer, the knife installed on the guard will cut off the excess.
In some models available on the market, a reel with an automatic winding mechanism is installed. It is enough for the owner to correctly fill and fix the ends in the head, and the tool itself will perform the winding operation when it is switched on in the operating mode. It is almost impossible to wind a fishing line into a trimmer with such a head, since the coil independently determines the position of the antennae. The advantages of the automatic trimmer head include the ease of refueling the fishing line, and the disadvantages are frequent breakdowns of the mechanism due to the complexity of the design and high cost.
With the advent of lawn mowers and trimmers, weed and grass control has become much more effective. The process of eliminating unwanted vegetation has also accelerated, and the quality has increased several times. One of the most popular models used in the vastness of our country is the HUSQVARNA 128R. This lawn mowing well has established itself as an inexpensive and effective device that greatly facilitates work on a personal plot.
HUSQVARNA 128R is owned by the Swedish company Husqvarna, which has been manufacturing trimmers for the garden and garden for over 100 years. The experience gained by the company during its work allows it to produce practically perfect devices. This lawn mowing can be attributed to the group of universal universal devices.
The weight of the HUSQVARNA 128R is relatively small, and is about 5 kg, excluding the cutting part of the equipment. The device works on gasoline, the main scope is the elimination of unwanted wild grass, mowing the lawn. The capture of the mowed strip is quite large, and amounts to 45 cm. This figure allows you to quickly and efficiently process large areas. The fuel consumption is relatively small, which is important, due to the sharp increase in the price of fuel resources.
The HUSQVARNA 128R is equipped with a Smart Start system, which significantly accelerates and simplifies engine starting. The power of this model is quite enough to perform the main types of work: mowing the lawn, removing unwanted vegetation. The fuel system is equipped with a special air filter that protects the engine of the braid from the ingress of fibers, solid small objects, and mechanical impurities. If necessary, this filter can be replaced. you do not need any special skills or knowledge.