How To Put A Disc On A Huter Trimmer

Huter GGT-2500S

  • gas trimmer
  • knife / disc included
  • weight: 7 kg
  • power 3.30 hp
  • noise level 96 dB

from 7241 rub. up to 11666 rub.

Huter GGT-2500S Reviews

Advantages

Power, convenience, almost everything is cut with a knife.

disadvantages

Leaking from under the gas tank cap, not the most convenient discharge, protective cover against grass. The wrench included in the kit was thrown away after the first turn.

A comment

While I’m more satisfied with the purchase than not. It is easy to assemble, starts up 2-3 times, cuts almost everything with a knife.
Production. China.
When unpacking, a "wonderful" smell of cheap plastic appeared. But everything is packed neatly, each part is packed in a separate bag.
It took about half an hour to build, and about 20 minutes it took to fit. that would be conveniently hung and worked easily. The kit includes unloading: belts on both shoulders and a thigh pad, which greatly facilitated the work in the future.
It started up for the first time clearly according to the instructions, in the future there were problems with the plant after the end of gasoline, and after turning the braid itself, but for about 20 minutes everything started up.
First I worked on a string. chopping grass as if it didn’t exist. Nettle also cuts, but sometimes reels on itself. At some point, I came across the remains of a fence, and the string broke off on one side so that I had to disassemble the coil.
Put the knife down. That’s where the tale began! Raspberries, nettles, burdocks and other light sticks chop in flight! 20 acres of weeds mowed down in 6 hours with a break.
Spent about 3-4 liters of gasoline.
Stumbled upon old sticks several times. if it didn’t chop, then it either bounced or braked. Once flew into a metal rod. The knife in two places at the ends was bent, it was necessary to straighten it with a hammer, to grind it and mow it again as if nothing had happened. There is a slight vibration. The next day, the hand trembled with habit.
Unloading belts do not hold well in buckles. you have to tighten or make an extra knot. The unloading itself, of course, is not the most ergonomic, but better than a simple belt on one shoulder. Protection on the hip. dangled and the bar of the braid constantly lay on the hip. I had to protect the tape with tape directly to my pants. the problem disappeared.
The gas tank cap leaks if you tilt the braid so that gasoline is in the neck. It does not work to tighten, there is a chance to break the thread.
The protection against mowed grass collapsed, apparently when I came across a steel bar.

Read more:  How to Mow Trimmer With Fishing Line Video

Video: How To Put A Disc On A Huter Trimmer


Advantages

disadvantages

until I discovered

How To Put A Disc On A Huter Trimmer

A comment

Prior to this, he used Texas power of 1hp, Huter 3.4 hp. (2500W) compared with it like a Ural motorcycle and a moped. I worked for about an hour (there was no more grass). I got a lot of pleasure and I hasten to share with you my first impressions.
A thick fishing line cuts large fat stalks of burdock and elderberry as much as flying spray! The impression is that nothing can stop him or suspend him!
Before starting, balance the carabiner mount point well. Before assembling the rod, wipe off the grease from the outside of the tube so that the mounting clamp holds firmly and securely. Also wipe off the grease from the rubber plug that covers the open end of the disassembled boom. Do not overtighten so as not to break the thread. Keeps assembled securely. Carefully tighten the protective cover, otherwise the nuts may cut into the plastic. As I understand it, it is made of polyethylene and quite plastic.
That’s all for now. I will add new impressions!
As promised, I’ll finish it. Two tanks worked. On the third appeared a defect. With the addition of gas, the speed drops. The service said to adjust the bolt on the carburetor, spring-loaded, near the gasoline cabin. He was twisted half a turn. I still twisted it by 4 half-turns, having achieved good work with increasing gas. I slightly adjusted the idle speed with the upper bolt. Works great again. He worked as a disk. A metal strip 2cm wide and 3mm thick accidentally hit the grass. Chopped while continuing to mow. Just a click heard. Picked up a felled piece and. "Surprised." I did not find any special damage on the disk! In general, power! I wanted this scythe to mow everything.