How it fastens?
The first thing to know with regards to the question of how men wear a belt correctly, how the accessory should be fastened. Most often, the belt is equipped with a buckle and an anchor, as well as holes on the second edge. In this case, you need to fasten the belt on the third hole in the tail, which should be medium. After the anchor has been threaded into this hole, the remaining tail of the belt is threaded through the loop.
When fastening a belt, a man should pay attention to the fact that its end should NOT gradually delaminate during further wear. For this, a man needs to give preference to high-quality accessories that are stitched with a thread, and not just glued. As a last resort, you can contact a specialist to repair a damaged strap.
Which side should the buckle be on?
The next important question concerns which side the men’s belt is fastened to during wear. According to the norms of etiquette, men wear an accessory with a buckle on the left side, and a loose tail on the right side. In the case of women, the opposite principle works. the free end is located on the left, and the buckle is directed to the right.
In the classic design, the belt buckle should be rectangular, the anchor of which is rounded so as not to damage the clothes. If we are talking about an informal style, there is a fundamental difference on which side of the belt buckle in men. The belt can be of different colors with all kinds of buckle shapes on the left or right side. It is only important that the belt “echoes” the man’s shoes.
What is the men’s belt worn with??
Today stylists and designers offer 3 types of men’s belts, each variety assumes a certain style in choosing clothes. often than not, men prefer the classic look of the belt, the optimal width and length with a discreet fashionable look. Accordingly, they wear it with a business classic look. a suit, shirt and tie.
If we consider the second version of the belt. informal, here the man is given complete freedom of choice. It can be accessories of different lengths and widths, any colors and shapes. But still, for a man, stylists advise to adhere to minimalism and restraint, experimenting only with the forms and types of buckles. The third type is a sports belt, which is worn with T-shirts and sportswear, but it must be covered with clothing.
How to wear a men’s men’s belt: recommendations of stylists
If you imagine the image of a man. a suit, a shirt and a tie, but without a belt, immediately there is a feeling of incompleteness. A belt is considered a complementary element of any men’s bow, as it is worn with trousers, jeans, and even shorts. Therefore, it is important to know the basic rules of how to choose an accessory, as well as how to wear a men’s belt for different clothing options and according to the norms of etiquette.
Today, a man needs to wear a belt not so much to maintain his pants, but to demonstrate a sense of taste, style and status. After a man has decided on the choice of a belt, it is important to decide on the direction in which he should go, how many holes should be anchored by the buckle, what width and length should be, and much more. In fact, any modern man should know how to wear a men’s belt correctly.
How to cut a men’s belt?
Most often, men wear a belt under a strict classic suit or trousers, although other clothing options require such an accessory to be worn, since according to etiquette, the belt is the final link of a harmonious bow. The subtleties and tips on how to wear a belt on jeans correctly, and do not differ from the points indicated above. But with such a piece of clothing, you can deviate from the classic norms and break the rules.
And what should a man do if his belt is too long and leaves an elongated tail when fastened, which is considered bad form. The cardinal way to solve the problem is pruning, which is performed by a very specific method. First, the belt is tried on to make marks where the center hole and buckle will be. Next, near the located buckle, unscrew the clamp. The new required length of the belt is measured from the upper part where the buckle was previously attached.
Now here is the location of the buckle, take away that segment of the belt, which will be the distance to the tail of the belt. Using this technique, a second mark is obtained. Using sharp scissors, carefully cut off the excess length, then collect the belt in the reverse order. Where the screw will be attached, a hot awl is threaded, and then the screw is screwed in. The belt is now ready to wear, and its length matches the size of the man’s waist.
How to dress correctly?
To look fashionable and modern, you will need to pay attention to the questions of how to wear a man’s belt according to the rules of etiquette. The width of the belt should be within 3-3.5 cm, if for trousers, but for jeans, the permissible width is greater than the specified norm. When wearing a belt, pay attention to which direction it goes to which hole it fastens, which side of the belt buckle for men, etc.
Conclusion
In order not to incline to drastic measures to modify the belt, it is important for men to carefully and responsibly choose such an accessory. If we consider the rules of etiquette, how the belt is worn, in which direction they will be directed and in which hole to fasten, all norms must be observed in the case of a strict classic image. For an informal style, casual or sports, errors are permissible, since such styles accept freedom of choice and self-expression.
068 097-90-34
How to Wear the Trimmer Belt Correctly
By balancing the braid by moving the ear
After fixing the required height for yourself, you need to balance the trimmer. For this, the eyelet is rearranged, with the help of which the device is suspended from the belts, forward or backward. As a result, you need to attach the belt to the trimmers so that when you release the steering wheel, the knife or saw blade does NOT fall on the ground, but hangs over it, and does not touch the surface. At what distance it will be located depends on the goals set.
»How to dress properly
How to properly wear the trimmer shoulder strap
Backpack strap for motorcycle It is convenient for long work with the trimmer.
Since the weight of the tool is at least 5-8 kg when loaded and fully equipped, and during long-term mowing of grass it is difficult to hold the brush in your hands, she came up with a backpack for a trimmer.
The shoulders have a foam insert that cushions the strain on the neck and shoulders.
The belt has a quick release clip. Easy to put on and take off.
To prevent the tape from cutting into the lower back when loading it, a special pad is provided.
The strap has plastic protection on the right side, so that the trimmer attached to the carabiner does not rub against the thigh and does NOT create discomfort and does not transmit vibrations to the operator.
For easy removal of the braid, a quick-release latch is provided.
The suspension mechanism itself was invented on the principle of a carbine damper.
Trimmer shoulder straps. What is a backpack strap
It should be understood that the weight of a filled lawn mower is on average 6-9 kg. And this device must be kept suspended all the time. To evenly distribute the load, the backpack strap seems to encircle the body from all sides. The main load falls on the shoulders and back, therefore the upper part of it is supplemented with wide foam inserts and fabric straps. Further, the straps are lowered along the body and, with the help of a quick-release clip, are connected to each other in the chest or abdomen area. And so that the belt does not cut into the body under load, a wide and durable lining is provided. A plastic leg guard is attached to the belt. It has a carabiner for attaching to the trim tabs and spring cushioning. The ease of unfastening and fastening the lawn mower is provided by a quick release latch located on top.
The best trimmers
Trimmer Huter GET-400 on Yandex Market
Trimmer STAVR TE-1700 on Yandex Market
Trimmer Makita UR3502 on Yandex Market
How to wear the trimmer belt correctly
Working with the trimmer is much more convenient and easier with the help of a special belt. Thanks to it, the operator can mow large areas of grass for several hours in a row without pain in joints and muscles. The design of the double-shoulder harness is designed in such a way that the lawn mower is held by the mounts itself. without the help of hands. She only needs to set the direction, and she will do the rest herself. How to properly attach the belt to the trimmers and adjust it for yourself in order to lighten the load, and will be discussed in this material.