How To Put On The Trimmer Strap

Navigation through records. Trimmer belt. How to adjust the knapsack trimmer belt

1. Adjust the height of the hook of the backpack trimmer belt by tightening the shoulder belts so that the trimmer blade lowered to the ground is parallel to the surface of the site (strictly horizontal).
When using the trimmer saw blade Adjust the hook height (by tightening the shoulder straps) so that the trimmer saw blade is tilted slightly forward to the ground.

Move the ear to hang the braid on the trimmer belt forward or backward, balance the trimmer so that when the steering wheel is released, the trimmer knife is located near the very surface of the site, but does not lie on injuries.
To cut bushes and young trees with the saw blade of a hedge trimmer, the trimmer must be balanced so that when the steering wheel is released, the machine is moved onto the hook horizontally to the ground. Attach.

Adjust the trimmer shoulder straps (harness straps) so that the load is evenly distributed over the shoulders (check by pressing the hook of the trimmer suspension with your hand).

Roller on the Husqvarna trimmer knapsack belt. In the design features of the Belt suspension (harness), which make it easier and safer Mowing with a lawn mower, trimmer, lawn mower, Husqvarna hedgecutter. wide shoulder straps and an elastic waist belt, quick-release locks (carabiners) in case of fire or any other situation requiring quick release from the trimmer. On the versatility of belts for men and women.

These Husqvarna Trimmer Backpack Belts (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, lawn mowers, lawn mowers, electric mowers, brush cutters.

Adjustment of the belt and the handle of the gas meter

Meet Automatic Parking Barriers

An automatic parking barrier is structurally very similar to a mechanical parking barrier. But there is certainly a difference. Automatic parking barriers are controlled using a remote control or a button.

Passive but energy efficient window (calculation principles)

A window is a weak point in the building envelope, since the resistance to heat transfer of a window block is in any case less than that of other building envelopes. The purpose of the passive house is to reduce heat loss as much as possible. Accordingly, the warmest are used in the passive house.

Geiger counter for smartphone

People who have lived in Japan for a long time say that before buying or renting a home, a Japanese, as a rule, will come to a room with a device and measure the intensity of all possible radiation, including even electromagnetic.

Making a kosher anvil from a piece of rail

Shop bite and you have to think: how to make an anvil with your own hands.

It should be borne in mind that the anvil is subjected to high impact loads and high temperatures. Therefore, she must have.

We translate the cordless screwdriver from ni-cad battery to li-ion batteries

I must say right away that you will have your own power supply as a charger for new batteries. But the old batteries that you had in a cordless drill can be safely disposed of. Because.

How to put on the trimmer strap correctly. Contacts:

Trimmer belt. How to adjust the knapsack trimmer belt

Adjust the height of the hook of the backpack trimmer strap by tightening the shoulder straps so that the trimmer blade lowered to the ground is parallel to the surface of the site (strictly horizontal).
When using the trimmer saw blade Adjust the hook height (by tightening the shoulder straps) so that the trimmer saw blade is tilted slightly forward to the ground.

Move the ear to hang the braid on the trimmer belt forward or backward, balance the trimmer so that when the steering wheel is released, the trimmer knife is located near the very surface of the site, but does not lie on injuries.
To cut bushes and young trees with the saw blade of a hedge trimmer, the trimmer must be balanced so that when the steering wheel is released, the machine is moved onto the hook horizontally to the ground. Attach.

Adjust the trimmer shoulder straps (harness straps) so that the load is evenly distributed over the shoulders (check by pressing the hook of the trimmer suspension with your hand).

Roller on the Husqvarna trimmer knapsack belt. In the design features of the Belt suspension (harness), which make it easier and safer Mowing with a lawn mower, trimmer, lawn mower, Husqvarna hedgecutter. wide shoulder straps and an elastic waist belt, quick-release locks (carabiners) in case of fire or any other situation requiring quick release from the trimmer. On the versatility of belts for men and women.

These Husqvarna Trimmer Backpack Belts (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, lawn mowers, lawn mowers, electric mowers, brush cutters.

How much to brush your teeth correctly

We Brush Your Teeth Correctly Currently, there are both general and individual recommendations for the correct cleaning of teeth and mouth. And the question is, how long does it take to clean

How to properly cut grass with a trimmer?

The main thing is to correctly adjust the trimmer belt so that the drum with the line does not crawl along the ground.

Make the right gasoline-oil mixture.

DO NOT use line that is too thick. it will take up speed and overload the trimmer.

Are not afraid to give it revs.

DO NOT wrap too much line on the drum, and do not wind it too much.

Stop and empty the trash from time to time.

Lubricate the trimmer cable and the gear train (if any) with grease.

The author of the question chose this answer as the best

The technique of mowing grass with a trimmer is not very difficult and takes into account the need for:

  • Decide exactly how you are going to mow. Can be folded, can be across.
  • Choose a place so that as a result there are no bald spots and the site looks harmonious
  • Understand what exactly you are going to mow, and depending on the choice, put the right knife. They are different. For example, hay or weed. You also need to set the speed.
  • Of course, it is necessary to prepare both clothing and protective equipment. No matter how experienced you are, you must wear glasses. Earphones and long clothes are not forgotten yet.

All the details of the technique are on how to mow with a trimmer.

Add to favorites link thank

First of all, inspect the area that you will be mowing. Cut off bushes or large flowers that cannot be cut by yourself.

Always start in an easy spot where there is little grass. Look for slopes or ditches on the property. Mows easiest across slopes.

Determine the direction of the grass. Mows easier if the grass is tilted forward.

When it comes to clothing, you should always wear glasses and boots. Anti-vibration gloves will also work.

Use different knives depending on the density of the grass.

Another tip: try to mow at the same speed. This will help your mower last longer. If you stop and immediately pick up speed, the trimmer will wear out faster.

Mows with the trimmer correctly:

  • Choose the right line. There are two different subjects for different tasks. Fishing line and knife. A line that is too wide is undesirable as it will overload the trimmer. As a rule, there is enough line in a simple area.
  • When the cutter is installed (fishing line or knife), it is necessary to tighten and fasten the nut.
  • Check charge or fuel. Put on the belt comfortably.
  • Trimmer movements Must be thought out. The algorithm is as follows: right-left-left-right. This will give maximum results. And be attentive to your work. It is necessary to control that there are no children or animals near you. You should also wear a mask to protect your eyes.

Add to favorites link thank

First, adjust the trimmer belt so that the drum does NOT touch the ground. Further, it is important to remember that thick line will overload the trimmer, so DO NOT overdo it with a thickness.

It is not worth winding a lot of fishing line on the drum.

Remember to periodically clean the trimmer.

We lubricate the cable with grease necessarily.

The trimmer is very handy as it can be used in a wide variety of places, including difficult terrain and areas near trees. If you are cutting Tall grass, start with the raised tops first and then continue with the bulk.

Add to favorites link thank

Use the trimmer as directed. The electric scythe (that is, the trimmer) is good because it does its job well in hard-to-reach places. After the trimmer can be used near trees, fences in relief areas. And not only for mowing the lawn, but also for ordinary grass.

The main thing. This is to make sure that the weeds Do not have time to give seeds and mow them on time.

If you did not have time to mow the grass by the time it gave the ears, then first mow the tops of the spikelets and burn them. And only then mow the grass itself, and put it in compost.

Add to favorites link thank

In almost all trimmers (if there are not any. Then special ones) the fishing line or the disc rotates clockwise. That is why it is better to mow the grass with a movement from right to left (a movement that resembles the movement when mowing with an iron scythe). Can be mowed by tilting slightly towards Mowing.

You need to mow with calm movements, and not with a jerk. Mows grass half the length of the line. If you grip more, the trimmer will do the trick, but the grass can clog the space between the spool and tube.

Mows, squeezing the gas to full.

Add to favorites link thank

Before mowing the grass, first, adjust the line and secure it well in your cavity so that the line does NOT dangle or go there. Here. Then fill in the fuel accordingly (if you do not have an electric trimmer), which consists of special oil and gasoline. Then start mowing the grass with smooth movements (not fast) to the right and left. Do not try to often chop off thick stems of plants, as the line will instantly run out and you will have to tune the reel again. In dense places, the main thing is not to spare the gas)

Add to favorites link thank

Trimmer from the Varyag company koshu according to the instructions:

Step 1. Installing the cutting device.

Depending on the type of weed, we choose a cutting tool: for soft-stemmed grasses. a fishing line, for hard-stemmed and small shrubs. a knife. We unscrew the nut of the cutting mechanism and install the cutting tool. Tighten the nut. the mechanism is ready for operation.

Note: some trimmers do not have interchangeable cutting tools, so you can start using them right away.

Step 2. Preparing the trimmer for work.

If the trimmer is electric, it charges the battery or plugs in the motor. If it is gasoline, fill the tank with fuel. Then, depending on the type of trimmer, we adapt it to ourselves (the upper motor trimmer is hung with a loop on the shoulder, the knapsack trimmer is shoulder-length, the lower-motor trimmer is taken by the handles). Hold the trimmer over the grass so that its cutting mechanism is parallel to the area to be treated. We start the engine.

Step 3. Mowing.

The grass trimmer is mowing with simple movements. It is important to remember that the cutting device of the device rotates counterclockwise so that the cut grass will fall onto the already treated area. The first is from right to left in front of you (this is how we cut off the top of the grass). The second is from left to right (this is how we remove the remnants of the grass).

It is better to divide a large area of ​​the cultivated area into squares, and mows the grass on them, moving from one to another along the outside of each square.

When mowing grass on slopes, it is recommended to mow from below, moving in parallel to roll the plot. We reached the edge, came back, became a little higher. and we repeat the same route. until the site is completely mowed.

To mow grass in an area where there are trees, it is better to use a line cutting mechanism, and you need to mow, passing the area around the perimeter, bypassing the tree around the trunk.

Step 4. Finish work.

After the end of the mowing of all grass on the site, turn off the engine, remove the trimmer (for shoulder and knapsack devices), clean the cutting mechanism of grass residues.

How to wear the trimmer belt correctly

»How to set up correctly

How to properly adjust the belt for lawn mowers for yourself

Offered by fazenda | June 2 | Views: 10082

Service center specialists often complain about consumers of household gardening equipment, who, even at the stage of its assembly and the first start-up, make mistakes and disable the equipment. Of course, there is an instruction in the package, but either it is stupidly written, or it is read after an incorrect assembly, when extra parts were found, or, worse, a breakdown occurred. Meanwhile, there is nothing complicated in the assembly of household gardening equipment. You just have to be careful. Let’s take as an example the assembly procedure for the Stihl FS 130 lawn mowers, supplementing our instructions with illustrations.

You need to start the assembly by opening the box and checking the complete set of the unit. If everything is in place, then we have to attach the handle to the rod with the motor, put on the belt, attach the protective cover and cutting elements.

First you need to get the handle and unscrew the thumbscrew, which secures the upper part of the support, and without losing the springs.

We insert the handle into the socket and fasten it without tightening it too much. Final position Adjust after final assembly of the lawn mowers.

We put the unit control knob on the handle tube and tighten the fastening bolt. There is a universal key for this.

All controls for the Stihl FS 130 lawnmower are located on the handle. These are: the throttle lever, which has protection against accidental switching on and the switch off the unit, which is controlled by the thumb. In the modification of lawn mowers with a D-shaped handle, the controls are located next to the engine on the boom.

We put a plastic protective cover. If you plan to use only a knife, then for its work we use part of the casing (in the picture it is colored orange).

If you have to work with a cutting line, then a plastic skirt is additionally put on the protective casing of the chainsaw and a knife is placed to cut the line. Some varieties of this model may have a universal cover or two different covers. one for the line and the other for the knife.

Sliding the skirt over the casing, you need to check the reliability of its attachment. Sometimes it may be necessary to fix this protection with another screw.

Now you need to put a knife for cutting the line and fix it with a screw.

It remains to install the reel, having previously loaded it with fishing line. The coil is screwed onto the shaft (as shown) or fastened with a special nut. Note that the threads on the shaft are usually left-handed. How to thread the line into the reel, read the instructions.

If a knife is required, then we put it instead of a coil. The knife is equipped with a protective cover so that it does NOT sink into the soil during operation. After installing it, do not forget to rotate this cutting element and make sure there is no backlash.

Well, the last, the simplest, stage is the installation of a metal clamp on the bar, i.E. Suspension strap mounts.

After the lawn mower is assembled, we put on a shoulder strap or a belt harness (whichever is given in the kit) and adjust them to the figure. Fill in the gasoline mixture, start the engine. and go.

See how to clean pomegranate properly

How to properly peel pomegranates. Description: In hot and sunny Georgia there is such a custom: if a young man is in love with a girl,

Navigation through records. Interesting

Replacement trimmer blade or cord: where to stop?

The choice between the fishing line and other cutting components should be based on a number of features that each of the listed types of saw headset possesses.

Line advantages:

  • Low cost;
  • Ideal for low to medium-sized grass (including lawns).
  • Dead wood;
  • Shrubs (raspberries, currants)
  • Perennial stiff-stemmed herbs (burdock, hogweed).

Unlike fishing line, the cutter is easily damaged when it collides with foreign objects. fences, stones. Therefore, you need to use it extremely carefully, do not allow solid objects to fall under it.

The disk is a universal tool that has proven itself for a wide range of tasks. Regardless of whether it is made of plastic or metal, its durability is several times higher than that of a conventional cord or cutter.

Advantages of the trimmer disc blades:

  • Efficiency for large areas;
  • Good performance, which is practically not affected by their shape. 3- and 4-blade discs do NOT lag behind the usual rounded ones in performance, although they crush the cut mass too much;
  • Adaptability to any type of vegetation.

The main disadvantage of lawn mower discs is considered to be their increased moment of inertia, which negatively affects the viability of the drive.

Modern manufacturers of garden equipment, in parallel with the release of trimmers, produce components and spare parts. So choosing a mower-compatible cutter or disc is no problem.

Equipment for electric and lawn mowers

Garden trimmers have become an indispensable part of the life of gardeners and gardeners. But in order for the grass to be mowed equally quickly and easily, you need to know what consumables. discs, cutters, knives, etc. Auxiliary elements (casing, belt) are best used for each specific situation. Their features will be discussed further.

Trimmer Shield Features

The trimmer cover is an auxiliary part designed to protect the operator from possible mechanical damage during operation, as well as from grass and branches flying in different directions.

Requirements that a modern trimmer cover must meet:

  • Lightness. for this they are made of plastic, which does NOT make the structure heavier;
  • Reliability, so that after pushing on a stone, the protection does not deform;
  • The degree of coverage of the saw headset. the cover should create a closed space around the knife.

They choose a cover according to the type of trimmer model, as well as often by the nature of the cutting part: there are combined covers, but there are separate covers for lawn mower cutters, trim heads or for discs.

Disc and cutter for a lawn mower: installation features

The replacement trimmer blade must be installed strictly according to the rules indicated in the instruction manual. For this:

How To Put On The Trimmer Strap
  • Unscrew the protective shield. casing;
  • The stopper is driven by a pin, which is threaded between the gearbox cup and the crankshaft hub;
  • Remove the bobbin along with the cord or the boot itself;
  • We take a pre-selected lawn mower knife. a milling cutter or a disc. Its grooves Mounting holes Must go into the splines of the hub;
  • Mount the boot;
  • Tighten with a nut;
  • Put the casing.

In order to avoid traumatic situations, the reliability of the fixation of the knife is checked before each introduction and DO NOT operate knives made by hand.

Varieties of cutting elements for electric and lawn mowers

Electric and petrol hand trimmers most often come with the following headset:

  • Fishing line (cord), which is inserted into a special reel;
  • With a knife.

Trimmer knives are the collective name of accessories for mowers, which outwardly differ in shape.

Among them are:

  • Discs. have a rounded solid shape or are divided into separate blades, between which an equal distance is maintained;
  • Cutters. the same disc, only with a large number of teeth.

In addition, knife mechanisms differ in:

  • The nature of the cutting edge. in the classic versions, they are found with 4 or 8 large teeth;
  • The presence of perforations. solid and lightweight, on the surface of which through holes (perforations) are made
  • The size of the notches. equal or different in size;
  • Material execution. in metal or plastic. The latter are less wear-resistant than metal ones. However, experts say they place less stress on the trimmer motor shaft and reduce the chance of breakage. Carbide-tipped trimmer discs have gained particular popularity. They are able to mow Not only the overgrown Burian, but also the tree and shrub growth. But due to safety regulations and flexible shaft capabilities, they are only suitable for straight handle models.

Cutters and discs are also differentiated by the thickness of the blade itself. Usually, this indicator does NOT exceed 4 mm.

Belts as an essential part for a lawn mower

A trimmer strap is a device that allows you to hang this unit on your shoulder or on your shoulders, thereby making your work easier and freeing your hands. The belt becomes especially relevant when it is necessary to operate the tool for several hours in a row. For example, even with a 3-5 kg ​​electric trimmer it will be difficult to wield the whole day.

Structurally, belts for lawn mowers are:

  • Classic. to dress over the shoulder or on one of them. Allows you to adjust the length to suit the height of the user. Often supplied with household electric or lawn mowers. Due to the different loads on the shoulder girdle and arms, they quickly lead to fatigue;
  • Backpack type. a shoulder strap equipped with adjustable fabric straps, like a school morning. Their popularity is attributed to their uniform weight distribution across the operator’s shoulder section and ease of use. Will be the best solution for professional purposes. Allows you to accurately distribute the load on the shoulders.

To reduce discomfort, the knapsack trimmer straps are supplemented with:

  • Foam rubber pads. soften the pressure of the device weight on the operator
  • A plastic clip that allows you to remove and put on the belt in a matter of seconds;
  • Adjustment on the lower back;
  • A plastic shield to reduce friction of the device in the back and dampen vibration from the scythe;
  • Latch for hanging.

Due to the primitive design, it is possible to repair belts with your own hands.

Mowing tall grass

Cutting tall grass is not difficult. Mowing takes place in two directions at once. First to the left, then to the right (first pass), cutting off the top. Then in the opposite direction, but already lowered the barbell with the blade to the required level. In this case, the grass that was cut remains on the left side, which is very convenient for the subsequent collection. It so happens that Burian has grown too much and abundantly. In this case, you may need several movements to the right and to the left, the main thing is to adhere to the correct pattern.

With several movements, the line is consumed much faster, but in some cases it may be necessary to get to the base of the thickets, into which it is impossible to cut through the east. If necessary, the line can be alternated with the knife. If difficulties arise, and the performance of the device has decreased, it will be enough just to replace the consumable and start working again.

DO NOT try to mow Tall grass just below the base. this can be difficult. For example, a long stem can wrap around the line, resulting in a long, unplanned stop.

Getting ready for operation

As with any other technique, there are rules for working with a trimmer. First, you need to make sure that the main components and assemblies are intact: the screw, the rod, the handle and the motor. If the device is NOT assembled yet, then it should be properly assembled according to the instructions.

Put on the belt

The trimmer cannot be operated without a belt: it also redistributes tension from the arms to the shoulders and spine, and helps to optimize kickback. It is necessary to put on the belt on the already assembled device when the rod is in the groove of the engine.

The strap itself is attached to a metal loop, which ensures a tight fit even under maximum load. The strap attachment design is the same in all models and does not require additional manipulations during installation. It is enough to insert the loop into the provided hole. and the fixation will be ensured.

Just putting on the belt is not enough, you need to adjust it for yourself. The belt is adjusted depending on the height of the person. You can make sure that the belt is tensioned correctly by work. If, during the mowing process, the shoulders and arms do not get tired quickly enough, and the vibration does NOT cause unpleasant sensations in the muscles, then the belt is aligned correctly. If your hands get up quickly, you should turn off the device, loosen the belt, and tighten it again to your height. It is necessary to carry out this procedure until the trimmer does not lie exactly “on the arm”, and on the weight the length of its bar will be optimal for the surface.

It is quite easy to adjust the length of the belt with the loop: just tighten it to reduce the volume, or loosen it to increase the length.

Electric scythe

With an electric trimmer, everything is much easier. After making sure that the gearbox has the required amount of lithol, you can start working. No additional mayor is required. Unless it is necessary to ensure that the carrier does NOT run in the path of the Mowing in order to avoid possible damage.

When the device itself is ready for operation, make sure that there is nothing around that could interfere with the operation. If possible, the intended area of ​​the mow should be cleared of driftwood, glass, stones and other solid objects that could damage the knife or line.

Depending on the work to be done, you need to choose a trimmer attachment: a screw-knife for weeds and hay, a line for lawn grass or a circular saw for shrubs. Mows follows in the opposite direction from people, if possible, then moving away from buildings and buildings. DO NOT get too close to the fence and the second structures, as the fishing line can catch on sharp edges, and the screw-knife will bend if accidentally hitting a hard object.

The preparation of the device itself will NOT take much time, all modern models of devices are designed in such a way as to facilitate and simplify their operation, started to work as soon as possible.

Correct operation of the grass trimmer

In every summer cottage, village, suburb and in the city itself, you can see these devices: they work tirelessly, leveling the lawn grass, clearing the space of squares and parks, gardens and vegetable gardens from thickets of burdock, wormwood and weeds. The noise and crackling noise of the trimmers is heard from early summer to fall, until grass growth has slowed down enough that trimming is NOT necessary. The automatic scythe has earned its popularity for its simplicity of design and operation. It is easy to use, easy to care for, and in the event of a breakdown cannot be easily repaired. The article will just tell you how to use the grass trimmer correctly.

Starting the electric trimmer for the first time

Setting up a break-in trimmer is also not difficult. To do this, you need to build and run it, but not work right away. It will be best to start the device several times (3-5 will be enough) to make sure it is easy to start. If the device starts without problems, you can run it in for five minutes on the lawn grass, without heavy loads.

Almost all modern electric trimmers are designed for 20/20 operation, i.E. Twenty minutes of operation and twenty minutes of rest. The latter is necessary for the engine to cool down a little. If you operate such a trimmer for more than 20 minutes, do not let it rest for the necessary time, then the engine resource may sharply decrease, as it is experiencing an increased load.

The mode of continuous operation in electric trimmers is not provided, but, nevertheless, if you do not break it in correctly, gradually increasing the load and operating time (up to 20 but not more than minutes), the device may work incorrectly, causing the owner trouble with constant breakdowns and failures in work.

It is important to remember that running in and putting the device into operation is an integral part of proper maintenance of the equipment. Thanks to this, the device will last much longer. This is how the first launch will be, its further work largely depends. You should NOT rush, even if the volume of work is not small, it is best to give the electric motor the required rest, because this way it will last much longer.

Oblique under hay

Hay for the villager is a necessity. it is animal feed in winter, fertilizer and covering material that protects the planting from the cold. Of course, with such versatility of use, the question arises of preparing hay in advance. Mowing under the workpiece differs from the usual aesthetic cleaning of the perimeter in some features.

  • For example, in order to prevent the mowed grass from being crushed into mulch, it is necessary to mow at the root, lowering the bar with the disc as low as possible.
  • You should outline the swaths in which the mown grass will fall. this will help to avoid piling up and crowding. In addition, at the end of the work it will be easier to clean it.
  • Another very important point is mowing large weeds. For example, a formed burdock bush, which is capable of cutting NOT every knife. If such a large weed is encountered on your way, you should cut it in a circle and continue working. When the perimeter work is completed, there will be lonely weeds sticking out on the site, which are easy to remove with your hands, moreover, they will NOT mix with the grass.
  • The main thing in mowing for hay is to keep the length of the grass, not letting it lose its shape. Otherwise, the resulting mulch can only be used as a covering material.
  • The mowing width must remain strictly fixed because you must remember the average size and length of the workpiece.

Some experts recommend using the line for hay mowing, but this is not always correct. Firstly, the grass in such an area is usually tall, moreover, its base is denser and more formed. Using a line will increase engine wear as it has to run at higher rpms. Of course, this will also affect performance. Secondly, the line is simply not provided for such loads. By using this material, you risk not only the line itself, but the entire mower.

The best option is a disc designed for shrubs. it is designed for increased loads. In addition, tall grass is coarser at the base and will mow with a blade productively than line designed for soft, silky lawn.

There are options for hay trimmer mowing, but all are unofficial modifications. In other words, self-made modifications, the use of which is highly discouraged, since instrument behavior under unexplored conditions can be unpredictable. By following simple recommendations, you can quickly get the necessary experience and harvest hay in large volumes.

Trimmer in action

So, the preparatory stage is over, it’s time to get to work. Where do you start? How to use all the capabilities of the device correctly? Of course, you can just get to work and learn everything by trial and error, or stick to simple but correct recommendations and get a wonderful effect after the first Mowing. There are nuances everywhere, whether it is mowing the lawn, sawing bushes with a disc or mowing grass for hay. You should start with the simplest.

Trimmer Operation in Wet Weather

It should be noted right away that in rain, wet and damp weather, the operation of electric trimmers is completely excluded. This could result in a short circuit and electric shock. Do not use electrical appliances even after rain, you must wait until the lawn grass is ventilated and dry. However, with gasoline lawn mowers, everything is also not as smooth as we would like. Some well-known manufacturers prohibit the use of their models in the rain, since the power units do not have the necessary degree of protection against moisture ingress.

You can also not operate wet equipment. If the braid has been in the rain for some (albeit short) time, then it must be brought to a dry place, wiped off and allowed to dry before starting.

Some experts argue that petrol trimmers can mow without stopping, even if it’s raining lightly. Of course, this is not recommended, because the likelihood of breakdown of various components and the engine itself increases. The top-mounted trimmer is less sensitive to moisture, but it is also not immune to power surges due to water trapped in the extension cord connector. You can limit yourself to buying a new extension cord, but repairing or replacing the trimmer itself is NOT a cheap pleasure.

Safety regulations

Among the safest and most popular trimmers, products from German manufacturers (including Denzel) are especially appreciated, as they pay increased attention to quality and reliability. However, despite the brand and model, there are a number of rules that you must clearly know and follow when using the trimmer.

  • Before use, it is necessary to read the instruction manual.
  • You can not work with the trimmer in a state of fatigue, illness, intoxication.
  • It is forbidden to use the scythe in explosive and fire hazardous areas.
  • You cannot mow during a thunderstorm and rain, as well as after rain, when the grass is wet.
  • You can work only during daylight hours, in good light conditions.
  • Use only the type of fuel and lubricant that is suitable for the particular trimmer model.
  • It is not recommended to repair the instrument yourself.
  • Do not touch rotating or heating elements during operation.
  • Do not smoke and light a fire while mowing, etc.

If you still have questions about the adjustment on the backpack belt of a specific lawn mower model, you can try to find the answers in the instruction manual attached to the product or look on the Internet, where it is clearly and easily shown how to set up and adjust the belt together with the lawn mower.

Trimmer Backpack Strap. Intended Use

Many trimmer models are equipped with a regular oblique strap. However, for work, it is best to purchase a backpack strap, which is specially designed for lawn mowers. Thanks to its clever design, it evenly distributes the weight of the device over the entire body. Backpacks with soft padding reduce weight and relieve pain in the forearms. The rigid backrest distributes the load between the upper and lower back, excluding the lower back. The shock-resistant thigh protector prevents the mower from contacting the leg so that it does not rub or transmit vibration. In addition, the belt provides:

  • Convenient transportation of the trimmer;
  • Comfort during operation due to the ergonomic position of the braid to the body;
  • Work safety. the knapsack belt prevents the lawn mowers from slipping out of the hands when hard objects get under the knife.

What is a backpack strap

It should be understood that the weight of a filled lawn mower is on average 6-9 kg. And this device must be kept suspended all the time. To evenly distribute the load, the backpack strap seems to encircle the body from all sides. The main load falls on the shoulders and back, therefore the upper part of it is supplemented with wide foam inserts and fabric straps. Further, the straps are lowered along the body and, with the help of a quick-release clip, are connected to each other in the chest or abdomen area. And so that the belt does not cut into the body under load, a wide and durable lining is provided. A plastic leg guard is attached to the belt. It has a carabiner for attaching to the trim tabs and spring cushioning. The ease of unfastening and fastening the lawn mower is provided by a quick release latch located on top.

Balancing handles

An important step in adjusting the backpack belt is also adjusting the handles to the optimum level. When the operator is holding the lawnmower, his arms should be relaxed and his shoulders should be parallel to the body. Therefore, after adjusting the two-shoulder strap, adjust the two-hand mechanism by moving it up or down. It is necessary to achieve such a result that the hands only set the direction, and not hold the device. If after that the trimmer balancing is disturbed again, you will have to repeat all the steps again.

DIY trimmer belt

Working with the trimmer is much more convenient and easier with the help of a special belt. Thanks to it, the operator can mow large areas of grass for several hours in a row without pain in joints and muscles. The design of the double-shoulder harness is designed in such a way that the lawn mower is held by the mounts itself. without the help of hands. She only needs to set the direction, and she will do the rest herself. How to properly attach the belt to the trimmers and adjust it for yourself in order to lighten the load, and will be discussed in this material.

Hook height adjustment

The most important thing is to adjust the belt so that the trimmer is at the correct level from the ground. To do this, raise or lower the height of the hook, which is done by tightening the shoulder straps until the holder is 10-15 cm below the hips (palm width). In this case, the knife of the attached braid should be parallel to the surface, that is, in a strictly horizontal position.

By balancing the braid by moving the ear

After fixing the required height for yourself, you need to balance the trimmer. For this, the eyelet is rearranged, with the help of which the device is suspended from the belts, forward or backward. As a result, you need to attach the belt to the trimmers so that when you release the steering wheel, the knife or saw blade does NOT fall on the ground, but hangs over it, and does not touch the surface. At what distance it will be located depends on the goals set.

Attaching the lawn mower to the belt

Depending on the model, the petrol braid can be attached to the belt using a strap or loop. In the latter case, for balancing, you need to move it along the rods in order to Get the desired result. In some cases, damping mechanisms are provided to smooth out vibration and to soften sudden jumps in the trimmer.

Belt adjustment

To provide yourself with comfortable working conditions, you need to be able to properly put on a backpack belt. This process requires some skill, but then, after adjusting the backpack for yourself for the first time, it will be much faster and easier to put on.