How to refuel a fishing line with a trimmer for Hyuter grass. Trimmer fishing line sticks together

Electric trimmer for Huter Get-1000s grass: Independent review

No doubt, beautiful and well.groomed lawns love everything. But not everyone likes to care for the grass, not to mention the fact that it requires strength, time and good tools. over, it is on the choice of the latter that the final result and the sensation of the process largely depend. To turn the lace cuts from work into entertainment, you should think about buying a new electric trimmer for the grass: quiet, compact, environmentally friendly and inexpensive. Such as Huter Get-1000s, to which this review is dedicated.

Before you stock up on this material for refueling in a trimmer for grass, you need to decide on the choice. After all, the usual so.called round fishing line for a trimmer is far from the only existing look. How to choose the most suitable? First you need to determine the working conditions.

Type choice. a line for a trimmer with a round section is the most common. It will suit any reels with the rarest exceptions. This type of consumable is suitable in order to mow fresh, juicy grass. But with the mowing of the so.called dryness, this kind may not cope anymore. It is pointless to mention attempts to mow shrubs and mention.

In addition to the usual type, there are others with sharp faces. Usually they are made by a “star” or “square”. The presence of sharp faces is the main feature and key difference between these threads.

It is thanks to this feature, the threads of such species are able to mow dry weeds. But the spicy threads are not devoid of disadvantages, the main of which can be called rapid wear and strength, markedly inferior to the round type.

In addition to the already mentioned types of forests, there are still interesting and often encountered varieties. Especially among them can be noted fishing lines, inside which a metal wire is stretched. Threads of this type are often used in tools working on gasoline and having an engine more powerful than one and a half horsepower.

Threads with a metal core are both with a round section and with sharp faces. Regardless of the type of cross section, such threads are the best suited to overcome hard.to.stop plants. Threads related to this type easily mow not only dry grass, but even small shrubs.

The threads with wire inside are favorably different from other types of consumables for their incredible wear resistance. But unfortunately, this feature has a more than noticeable effect on the price of this type. The cost of threads with a core significantly exceeds the cost of threads of other types.

Choice in thickness

In addition, special attention should be paid to the thickness of the consumption material. For mowing young grass, a thread is suitable with a diameter of one and a half millimeters. The larger the diameter of the thread, the more dry and rude weeds it can overpower.

When choosing a fishing line in thickness, there is one “but”. It is important not only to evaluate the capabilities of the material, but also to take into account the features of the trimmer for the grass. You must definitely look into the user’s management, which is attached to the tool, and find information about the requirements for the cutting element.

The use of inappropriate thread can lead to the failure of the tool. The use of too thick thread will entail the overload of the device engine. And the use of too thin thread will significantly increase the wear of the torque.

That is why it is necessary to approach the choice of consumables no less responsibly than to refuel in a trimmer for grass. When a suitable fishing line for a trimmer is found and purchased, you can begin to consider the ways to wind it on the coil.

Features of the use of trimmers

A trimmer for grass, mowing grass with a fishing line, can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, a row in a garden plot.

Such a convenient, and most importantly, effective device, like a trimmer for grass, exists in several variations:

As the names understands, the types of trimmer for grass are noticeably different from one another. But regardless of the type of this tool, its cutting element can be a fishing line for a trimmer. Of course, a trimmer tilted for the grass for a trimmer is not infinite. And sooner or later it will need to be replaced by a new.

Fishing consumption directly depends on the frequency of using the device and the scale of the work performed. The more herbs are brazen and the more often it is trimmed with a trimmer for grass, the more actively a fishing line for a trimmer is consumed in it. And, accordingly, the faster it will end. In this regard, the question arises: how to refuel a fishing line for a trimmer to a trimmer coil for grass?

Not everyone knows the answer to this question. But the winding of the fishing line on the coil plays an important role in the work of a trimmer for the grass. To make the device normally, it is very important to correctly wind a new fishing line for a trimmer to the reel. About how to change a fishing line for a trimmer on a trimmer, and will be discussed in this article.

The first method of winding fishing

The required amount of fishing line is cut off. Now you need to carefully examine the bobbin to understand what type it belongs to. It depends on this how to wind the fishing line for the trimmer.

Spulks are of two types. In general, they are slightly different from each other. Regardless of the species, the coil is divided into two compartments. the upper and lower. In the first type, the dividing line does not close into the ring and has a deepening.

Read how to breed gasoline for a benzotrimmer

The second type is solid, but near it on the sides on both sides there are small through holes. The method of winding the thread must be studied depending on which of the above species the coil belongs.

How to wind a fishing line for a trimmer to a trimmer coil for Huter grass

• The previously prepared six.meter segment must be bent in half. Best not exactly in the middle, but so that one half turned out to be about fifteen centimeters longer.
• Then the bending place must be inserted into the recess in the dividing line. One half of the fishing line should be in the upper part of the coil, the other half in the lower part.
• Now you can proceed directly to the winding. You need to wind up in the direction in which the arrow on the bobbin indicates. When winding, you need to keep the threads so that they are not intertwined and the upper half is wound into the upper part of the coil, and the lower half into the lower part. Each half should remain free about fifteen centimeters from the end.
• There are small recesses (or, in other words, grooves) in the upper edge of the bobbin to fix the consumable. The ends of the threads need to be inserted into these recesses so that they are fixed one opposite the other.
• The final stage of refueling the consumable in the tool. the ends fixed on the bobbin must be put into the corresponding holes in the head of the trimmer for grass.
• That’s all. The winding process is completed. Now it remains only to collect the head into a single whole. The spring is neatly placed back between the bobbin and the head. Then you need to insert the bobbin into the head and press them to each other.
• Free ends of threads are recommended to pull out more tightly. To do this, take turns pulling the ends of the consumables so as to extract them from the grooves of the bobbin. You can make sure that the cutting element is extracted from the holding grooves, having tried to pull the threads a little. they must freely go through the holes in the head.
• Clutching a bobbin downward, you need to put on a lid over it. The lid must be screwed to the head so that all the grooves on their buildings are compatible and the bobbin remains between them.
• And finally, the very last action. the head is screwed back to its place in the lower part of the tool.

The process is completed. Trimmer fishing line is tucked up. Trimmer for grass is ready for further work.

Model operating instructions

The above trimmer for grass gasoline “Huter” should be used taking into account the safety rules that are registered in the instructions. Of these, you can find out what to use equipment to persons who are under the influence of alcohol or physically tired are unacceptable. Before starting work, it is necessary to arm yourself with special means of protection, among them the appropriate clothes, protective glasses, mittens or gloves, helmets and headphones should be highlighted among them. Equipment should not be used near flammable and explosives. This also applies to the conditions under which high humidity remains.

To replace a fishing line for a trimmer in a trimmer, remove the head cover. To do this, press the fingers of the latches of fixers located on both sides of the lid, and pull the lid up. Access to the coil will open. After that, pull it out, pulling up the axis on which the coil sits. If the ends of the fishing line stick out from the holes of the head, then lift the coil along the axis and pull the remaining fishing line from the holes of the head. Now the detail does not hold anything and it is easy to remove and remove the remaining working thread.

The coil is divided into two parts by the central partition with a neckline. Different models of cobs differ in size, so you need to check how much you can wind the fishing lines on the bobbin. Its length ranges between 1 and 4 m.

Types of trimmer heads

A mowing head for grass is a cylindrical case in which a coil (bobbin) is inserted with a fishing line in it (cord). This design can be installed both on gasoline and electric trimmer. The heads differ in the method of refueling and supplying the cord and there are 3 types.

• Automatic. The cord is supplied after the user reduces engine speed. Although the automatic supply of the fishing line is convenient if large volumes of work are performed, such rods have one drawback. a large thread consumption.
• Semi.automatic. Using this type of head does not require complicated manipulations from the user. The principle of their operation is arranged so that the cord is automatically lengthened at a time when the device works at full speed. It is enough to slightly hit the trimmer’s head for the grass on the ground (this removes the cord lock), and the fishing line for the trimmer, due to the centrifugal force, moves out of the bobbin, after which it is cut to the desired length with a knife located on a protective casing.
• Manual. For lengthening the cord, the device is required, after which the fishing line for the trimmer is handed out manually.

Based on the above, semi.automatic bobbins are the most optimal option. It should also be borne in mind that the coils for a trimmer for grass are one.built (used only to trim the grass) and two.string, which are used to mow high grass and small, with thin stems of shrubs.

What can be used instead of fishing line

Many users of trimmers are wondering: how to replace the cord, by default used in this kind of devices? Unsafe experiments begin to carry out, installing metal or copper wire, metal cables or strings in a mowing head, as well as a regular fishing fishing line for a trimmer.

If you install a metal cable instead of fishing line, then a trimmer for grass turns into a dangerous device not only for the user, but also for others. This fact is explained by the fact that during the operation of the unit, the steel cable will be gradually shut up, its ends are gradually released, and small pieces of wire will fly in different directions at high speed.

A similar one happens when using steel or copper wire, only with the difference that the torn pieces will be larger and can cause a significant injury.

And if you accidentally hook your or someone’s leg, working as an unit with a steel cable (wire), then a strong and deep section of the fabrics, and in some cases, amputation of the fingers are provided with you. The manufacturer is not in vain for these purposes, nylon uses, since it is quite light and durable, and when separating he does not fly away and cannot cause injury.

It is possible to use a fishing fishing line for a trimmer in a trimmer instead of a standard one, of course, but this will add unnecessary trouble, because it quickly wears out, breaks, mows slowly and does not fit for cutting hard grass. In addition, during the work, a lot of time is lost to replace the broken tool more than once.

How to wind a fishing line for a trimmer for a trimmer for grass for grass Bosch Art 23 SL

In practice, the installation of a regular fishing line is justified if the user is going to mow grass near the fence, especially if he is from a rabid grid. In this case, in order to protect the standard and sometimes expensive cord from wear, it changes to a fishing fishing line for a trimmer, which is not a pity. Usually, in order to change the cord to a fishing line for a trimmer, it must be selected the greatest thickness-2-3 mm.

Hair replacement in the trimmer Huter Mehanikabiz.Ru

March 22, 2018. How to change a fishing line for a trimmer trimmer for grass and how best to choose. How to wind up a coil now let’s talk about how to wind. Trimmer for Huter GGT 2500S Video grass I bought a gasoline trimmer for Huter GGT2500S Hello Hello Hello everyone. Gasoline trimmer for Huter GGT 1300T HELL.

With a GGT-1500S gasoline trimmer, the arrow consists of two parts and can be easily assembled without tools

But if you do not need to transport the tool to the mowing position, you should pay attention to his “twin brother” with a strong bar GGT-1500T. The position of the handle on the trimmer is adjustable in height for the optimal balance

Shoulder belt bothers your hands as much as possible. Thanks to an effective anti.vibration system, prolonged work will be performed without excessive fatigue. The plastic case protects the operator from throwing grass, branches and stones from under the cutting block.

Features of a trimmer for grass Huter GGT-1500S-safety operation HUTER GGT-1500S Safe Operational Call prevents grass on the operator. Convenient control GGT-1500S Convenient control of the recover fuel tank. for convenient tracking fuel consumption. Convenient installation of the HUTER GGT-1500S tool, convenient installation of the tool, convenient bicycle handle of a gasoline trimmer for grass Huter GGT-1500S. for uniform natural movements of the operator during operation. Easy transportation Huter GGT-1500S light transportation.The advantages of the Huter GGT-1500STA engine are established. 1.5 kWhn both young grass and dense growth.Electronic ignition.Vibration extinguishing system.

How to change a nylon fishing line for a trimmer on a trimmer?

To fill the shock head of a lawn trimmer for grass with a nylon fishing line for cutting grass, the shock head will need to be previously removed from the drive shaft and disassemble.

The disassembly process is simple. There are visible grooves on the head of the head that actually indicate the fasteners. In these places of the cover of the lid, it is necessary to create a small pressure, while stretching the lid.

Operation on the analysis of the module case where the nylon fishing line for a trimmer is refueling, acting as a cutting tool of a trimmer for grass in the mode of cutting the grass of lawns

To lay a new nylon fishing line in a trimmer for grass, about 3 meters of material in each groove (6 meters in total), designed for this plastic coil. Previously, the coil is removed from the spindle with the spring and the puck. The remnants of the previously refueling nylon fishing line from the coil must be removed.

Next, take a pre.purchased nylon fishing line for a trimmer (diameter 2.5 mm), rewind 6 meters of the product, cut off a measured piece. The resulting segment of the fishing line for a trimmer for the grass is folded in half. The end part of the nylon fishing line in the place of a half bend forms a kind of loop.

Winding of nylon fishing line on the reel

At the next stage of the operation, the coil of the head of the trimmer for the grass of the lawn is grasped with the palm of the left hand, holding in the position, as shown in the picture below. With the other hand, throw the loop of the nylon fishing line into the protrusion of the central side, dividing the winding area of ​​the coil into two sectors.

Laying nylon fishing line in a trimmer for grass, or rather in the sectors of the coil. Loop version of the stop of the material before winding. Some trimmers for grass lawn (garden) have other options for the stop (mount)

Win both halves of the nylon fishing line evenly and tightly counterclockwise (or on the arrow indicated on the coil body). Stretch. wrap the slings without twisting one sling from the other. The winding ends when the residual ends of the nylon fishing line are about 150 mm long.

Then they insert the coil back into the spindle and pass the remaining 150 mm ends of the nylon fishing line into spindle grooves specially provided for these purposes. Then the spindle part of the assembly is rested on the palm of the left hand and on the opposite side of the coil is installed in the place of the washer and the spring previously removed.

The assembly process. installation of a wound coil: 1. the production of the remaining 150 mm ends of the nylon fishing line in special grooves of the spindle; 2. installation on the coil of previously removed elements

This is the replacement of the fishing line in the trimmer ends, the assembled module is installed on the drive part, as was considered above in the text. Meanwhile, many models of trimmers of lawn (garden) are also supplied with bush cutters, the use of which also requires installation procedures.

What you need to know about the fishing line on the trimmer for the grass

Fishing lines is called consumable, which consists of nylon, and serves as a cutting device. Through this equipment, the grass grows, which is ensured due to rotation of the instrument head with a high frequency. This material has a different thickness, which depends on its use on the corresponding tools of low-power (from 1 to 1.6 mm), electric from 500 W (2-2.4 mm) and gasoline trimmers for grass with motorcycles (from 2.4 up to 3.2 mm).

The more powerful the tool, the accordingly there should be a cutting equipment. This affects not only the quality of the injection of grass, but also on the life of the material. If you ask the question of how to wind the coil of a trimmer for grass, then it’s time to change the reload of the tool. With the onset of spring, this issue is becoming more and more in demand, so it’s time to understand the step.by.step instructions for replacing the fishing line in the coil of the trimmer for grass.

Characteristic malfunctions and their independent elimination

Naturally, during operation, the owners of the trimmers are faced with certain malfunctions of mowing heads. over, they are most often associated with certain difficulties in pulling (lengthening) of the cutting cord from the coil. The most common causes of the lack of fishing line is its “bite” between the turns or sticking.

If the string is not served

In this case, the cause of the defect is incorrect winding of the cutting cord. A trimmer fishing line can be wound with insufficient tension, which helps to cross the turns together and confuse the string. When the coil rotates, the cutting cord under the influence of the emerging centrifugal force is delayed, which in turn leads to the clamping of the free end of the fishing line between the turns. To eliminate this malfunction, you need to dismantle the coil, disassemble it and rewind the string so that the turns lie down in even rows, pressing tightly against each other.

If the string sticks together

Squeezing of the turns of the fishing line directly in the mowing head can be caused:

If, nevertheless, the user could not avoid sticking the fishing line, then to repair the trimmer coil for the grass, you need to remove and replace the existing cord with a better.

If there is too much string consumption

When using semi-automatic mowing heads, the user can detect the accelerated consumption of the cutting cord due to its spontaneous lengthening. As a rule, this happens due to the weakening of the spring installed inside the coil. You can eliminate the malfunction by putting several goals under the spring.

Possible malfunctions

Gasoline trimmer for grass. at the technical level complex device. Before implementation, you should read the annotation of operation very closely. But this is often touched, because of which the product can quickly fail. As a result, it stalls, very very heated and fails. Either simply does not start due to the fact that a person did not get acquainted with the rules of operation, and refuel it with poor gasoline.

Review of the gasoline trimmer for Huter GGT 1900T See Subsequently.

Checking health and gleaming

In order to evaluate the condition of the coil yourself, it is necessary to explore the coil body, it should not have cracks and pollution.

The current parts and nodes should also not be rusty. Candles should be in good condition, they need to be installed correctly. The circuit switch should work well.

Read how to charge a fishing line for a trimmer to an electric trimmer for grass video

If everything is in order, then check the coil.

• Check the resistance.
• Check the presence of a spark.
• You can use a candle.
• If the situation is hopeless, then it is necessary to remove the lid from the candle, put a nail without a “cap”. The main thing is not to damage the cap.
• We start the unit. Check the ignition system. It is necessary to ensure that the candle is smooth into the hole. We look at the color of the sparks. If the color is blue, then there is no malfunction.

When checking it, you need to set a gap between the flywheel and the coil. The size of the gap fluctuates, depends on the model of the tool. The gap between the flywheel and the coil should be from 0.2 to 0.4 mm. Check the ignition coil is better with a multimeter, as well as a tester. Repair the ignition coil is inappropriate.

About how to choose a coil for a lawn mower, see further.

How to wrap a fishing line for a trimmer for a trimmer for Huter grass

March 22, 2018. How to change a fishing line for a trimmer trimmer for grass and how best to choose. How to wind up a coil now let’s talk about how to wind. Trimmer for Huter GGT 2500S Video grass I bought a gasoline trimmer for Huter GGT2500S Hello Hello Hello everyone. Gasoline trimmer for Huter GGT 1300T HELL.

With a GGT-1500S gasoline trimmer, the arrow consists of two parts and can be easily assembled without tools

But if you do not need to transport the tool to the mowing position, you should pay attention to his “twin brother” with a strong bar GGT-1500T. The position of the handle on the trimmer is adjustable in height for the optimal balance

Shoulder belt bothers your hands as much as possible. Thanks to an effective anti.vibration system, prolonged work will be performed without excessive fatigue. The plastic case protects the operator from throwing grass, branches and stones from under the cutting block.

Features of a trimmer for grass Huter GGT-1500S-safety operation HUTER GGT-1500S Safe Operational Call prevents grass on the operator. Convenient control GGT-1500S Convenient control of the recover fuel tank. for convenient tracking fuel consumption. Convenient installation of the HUTER GGT-1500S tool, convenient installation of the tool, convenient bicycle handle of a gasoline trimmer for grass Huter GGT-1500S. for uniform natural movements of the operator during operation. Easy transportation Huter GGT-1500S light transportation.The advantages of the Huter GGT-1500STA engine are established. 1.5 kWhn both young grass and dense growth.Electronic ignition.Vibration extinguishing system.

How to change a nylon fishing line for a trimmer on a trimmer?

To fill the shock head of a lawn trimmer for grass with a nylon fishing line for cutting grass, the shock head will need to be previously removed from the drive shaft and disassemble.

The disassembly process is simple. There are visible grooves on the head of the head that actually indicate the fasteners. In these places of the cover of the lid, it is necessary to create a small pressure, while stretching the lid.

Operation on the analysis of the module case where the nylon fishing line for a trimmer is refueling, acting as a cutting tool of a trimmer for grass in the mode of cutting the grass of lawns

To lay a new nylon fishing line in a trimmer for grass, about 3 meters of material in each groove (6 meters in total), designed for this plastic coil. Previously, the coil is removed from the spindle with the spring and the puck. The remnants of the previously refueling nylon fishing line from the coil must be removed.

Next, take a pre.purchased nylon fishing line for a trimmer (diameter 2.5 mm), rewind 6 meters of the product, cut off a measured piece. The resulting segment of the fishing line for a trimmer for the grass is folded in half. The end part of the nylon fishing line in the place of a half bend forms a kind of loop.

Winding of nylon fishing line on the reel

At the next stage of the operation, the coil of the head of the trimmer for the grass of the lawn is grasped with the palm of the left hand, holding in the position, as shown in the picture below. With the other hand, throw the loop of the nylon fishing line into the protrusion of the central side, dividing the winding area of ​​the coil into two sectors.

Laying nylon fishing line in a trimmer for grass, or rather in the sectors of the coil. Loop version of the stop of the material before winding. Some trimmers for grass lawn (garden) have other options for the stop (mount)

Win both halves of the nylon fishing line evenly and tightly counterclockwise (or on the arrow indicated on the coil body). Stretch. wrap the slings without twisting one sling from the other. The winding ends when the residual ends of the nylon fishing line are about 150 mm long.

Then they insert the coil back into the spindle and pass the remaining 150 mm ends of the nylon fishing line into spindle grooves specially provided for these purposes. Then the spindle part of the assembly is rested on the palm of the left hand and on the opposite side of the coil is installed in the place of the washer and the spring previously removed.

The assembly process. installation of a wound coil: 1. the production of the remaining 150 mm ends of the nylon fishing line in special grooves of the spindle; 2. installation on the coil of previously removed elements

This is the replacement of the fishing line in the trimmer ends, the assembled module is installed on the drive part, as was considered above in the text. Meanwhile, many models of trimmers of lawn (garden) are also supplied with bush cutters, the use of which also requires installation procedures.

Trimmer coil device for grass

Cassyle heads for trimmers come in different designs. both simple and complex. The figure below shows a semi.automatic trimmer head from the Husqvarna motorcycle (Husqvarna).

This type of head is present in the configuration of most benzocosyles and electrimmers such as Stihl (Stihl), Patriot (Patriot), Champion (Champion), Bosch (Bosch), Huter (Huter) and others. The device of the braid head is quite simple. It includes the following details:

• the base of the mowing head;
• button for semi.automatic supply of the cord;
• Spulk (coil), into which a fishing line for a trimmer is refuel;
• spring;
• eyes. through them a fishing line for a trimmer goes outside;
• trimmer head cover;
• Trimmer fishing line (cord).

There are also simpler trimmer heads shown in the next photo.

All these nozzles do not allow you to change the length of the fishing line in semi.automatic mode (after pressing the button). In the case of a break in the cord, you have to stop the mower and change it manually.

How to replace a fishing line for a trimmer in any trimmer

How to replace a fishing line for a trimmer in any trimmer so, first we unscrew the nozzle. You need to do this, rotating the drum to the right. Here we have in our hands a drum with the remains of an old fishing line. We open it. Most often, the lid closes on the latches, which can be opened with a screwdriver by pulling it into the holes and slightly pressing it. Or you need to squeeze the lock and turn the lid towards the arrow. In this case, the cover itself must be held, t.To. There is a spring in the drums with automatically feeding the fishing line, which straighten up, can throw away all the internal parts of the drum. Gently taking out the coil, we remove the scraps of the fishing line from it.

Now you need to take five meters of a new fishing line and fold in half (to find the middle). In the middle part of the coil there is a recess (in some structures. a hole) for which you need to hook our fishing line for a trimmer. There is also an arrow on the coil showing the direction of winding. An important detail. if the coil has two compartments, then one half of the fishing line should be wrapped in one direction, and the second one in the other. Ending the winding, you need to leave 15-20 cm fishing line with free. There are also two recesses on the upper ring of the coil, through which these free ends need to be drawn. Directly with the winding itself, we coped.

The last stage of the process of replacing the fishing line is the assembly of the drum. First you need to install a spring and washers in your place. Then, holding the coil with one hand, the second you need to go through the ends of the fishing line into the corresponding holes on the sides of the nozzle. After that, install the coil in its place, pulling the fishing line for the trimmer and trying not to shift the spring. When all the internal elements of the nozzle will take their places you can close the drum with a lid. You just need to make some efforts so that the latches stand in their place. Voila! Kosyl nozzle is ready for work! When choosing a fishing line for your motor braid for grass (gasoline or electric), you should dwell on some points that we will talk about in detail about.

Fishing diameter. The engine power determines what maximum fishing diameter can be used for a given braid for grass. For example, the manufacturer of an electric trimmer for grass with a power of up to one kW recommends using a fishing line for a trimmer Ø2 mm, and with values ​​of about five hundred W. only Ø1.5 mm. Also, the manufacturer of any powerful trimmer for grass with a curved rod recommends using a fishing line for a trimmer Ø2 mm. The gasoline engine is more hardy than the electric one. therefore, there you can install a thicker fishing line for a trimmer, which means a stronger one, which allows you to download more grass and work longer. You can select a fishing line for a trimmer for trawoks with a flat rod according to the next simple algorithm: the engine volume in dozens of cubic centimeters corresponds to the diameter in millimeters. For example, for the Husqvarna 128R travic, the engine volume is about twenty.five cm3, a fishing line for a trimmer is Ø2.5 ± 0.2 mm. For more powerful black cutters with volumes of more than forty cm3, only the geometric dimensions of the output of the mowing head are limited to the diameter of the fishing line. no more than four mm. So, a thin fishing line for a trimmer (about 1.5 mm) cuts out cultural lawn grass well, and a thick one (for example, 3.0.3.5 mm) successfully destroys weeds and even a young shrub.

Form of the fishing line. The simplest and cheapest in production is a fishing line for a trimmer of a round section. However, the requirements of ergonomics and environmental protection limit its use. due to its physical properties, it creates an unacceptably high level of noise (which is comparable to the noise of the engine itself). These are the classic round fishing line for the trimmer Husqvarna or Oregon Roundline or Chipmaster. To lower the noise level produced by the fishing line, they give it a special shape-they make it spiral as Oregon Duoline Plus (reducing the noise level by fifteen dB) or with special transverse grooves as Husqvarna Whisper (-8 dB). Following the school laws of physics, the “working” part of the fishing line during the mowing process is only a end, not a lateral surface. However, to increase the “severity” of the fishing line, t.E. To increase efficiency, a cross.section from the round is changed to faceted: star.shaped, square or square with teeth. Oregon Starline, Nylsaw or Flexiblade. For example, according to experts, a fishing line for the Oregon Nylsaw trimmer, due to its square profile, 27% is more “acutely” of its analogue of a round section, which clearly affects the increase in the speed of mowing.

Rules for use

Before the introduction of a gasoline trimmer for grass, its owners must make sure that the gearbox is lubricant. In addition to using this device correctly, you should read all the norms that contains the operating abstract. There are also safety standards here, advice on the abilities and techniques of effective work, as well as proper maintenance motorcycles.

When the user got acquainted with all this, he can have a lawn mower and start the installation of the device. It should be carried out during the first 3-4 hours of operation

At this time, you should very carefully operate the motorcycle. This is the most perfect in sparing mode on a soft grass

Under no circumstances can it use it in idle for more than 10 minutes. These periods should certainly be alternated with interruptions and gangways for 20-30 seconds. During this period, adjusting and setting up the working modes of a gasoline trimmer for grass. It will not be unnecessary to have a spare fishing line for a trimmer, so that in the event of damage or unsatisfactory operation the standard one can change the fishing line for a trimmer to a more benign.

Installation of fishing fishing line: pros and cons of

Sometimes a conventional fishing fishing line for a trimmer is installed in the drum of a garden trimmer for grass, instead of a special one, it is just a waste of time. The fishing fishing line for the trimmer is too soft and is erased many times faster than the traditional option. She can really mow grass, but such non.standard use is poorly suitable for her. A fishing fishing line for a trimmer can be used exclusively, as a spare option, if there is nothing else at hand.

It is also worth considering that it should be quite thick. It is better to insert a fishing line for a trimmer with a thickness of at least two millimeters into the lawn mower. By the way, difficulties may arise with its installation if the grass trimmer model provides for winding on the coil.

Fishing line for a trimmer. varieties and the ability to replace other material

A cord for a trimmer for grass can be of different diameters (from 1.2 to 4 mm), and it must be chosen depending on which vegetation is required to mow. the thicker the fishing line is for a trimmer, the more rough grass it will cope. Experienced users recommend putting a fishing line for a trimmer 2 mm thick, which is a universal.

The shape of the fishing line can be round (for juicy grass) or with sharp faces in the form of a square or asterisk (for beveling dry grass). The second type is less durable and wear out faster compared to the round cord.

One of the popular issues regarding the work of trimmers is whether it is possible to replace a special cord for mowers with other materials, for example, metal or steel cables and strings, wire, etc.D. You need to know that the installation of such items is not recommended, because along with them the trimmer for grass turns into dangerous equipment. During the mowing, pieces of wire or metal will constantly break off and fly off in different directions, risking to injure the employee. And if you accidentally touch their limbs during work, a serious wound is provided.

Owners of trimmers interested in whether it is possible to use a fishing fishing line for a trimmer, we answer. this is allowed, but it will be much faster to tear and wear out, which means it is a frequent replacement.

The process of replacing the fishing line

For each trimmer, the manufacturer recommends a fishing line for a trimmer, or a cord, a certain diameter. a coil is made under it. It can be from 1.2 to 4 mm: you need to see according to the instructions what size of the fishing line is permissible for your tool. For example, many trimmers with the maximum value are 3 mm (recommended for hard grass). the thicker cord can not be installed.

A thin fishing line for a trimmer, 1.2. 1.6 mm, is suitable for mowing young, soft vegetation

Also, when choosing, pay attention to the structure of the cord: round is the most durable and suitable for rough grass, curly. for soft, twisted or with notch. for thin stems. Depending on what grass grows on the site. lawn or wooden, buy appropriate consumables

It’s important to know! Buy only a branded fishing line for a trimmer recommended by the manufacturer of a trimmer for grass

It is made of high.quality materials and has strength. it will perfectly cut the grass and not wear out so quickly

It’s important to know! Buy only a branded fishing line for a trimmer recommended by the manufacturer of a trimmer for grass. It is made of high.quality materials and has strength. it will perfectly cut the grass and not wear out so quickly. Useful advice: place a segment of the cord in the water for 30 minutes, then it will become more elastic and stronger

Useful advice: place a segment of the cord in the water for 30 minutes, then it will become more elastic and stronger.

The fishing line for the trimmer is wound on the spool, which is hidden in the body of the trimmer head. To get to it, you need to disassemble the element. The housing is provided with latches-fixers, when clicking on them, the cover cover is easy to remove. Sometimes disassembly is carried out by promoting the body.

be careful! Remember in what sequence the elements are installed, how a spring and a fixing screw are located inside the head. Gently fold all the details in one place so that nothing is lost and there are no problems during assembly.

We offer to familiarize yourself: catching pikes on a wobbler. simple rules

We described how to wind a fishing line for a trimmer into a coil of a trimmer for grass with two antennae. This is the most common option. But there are other ways. For example, if there is one antennae in the mowing head, then the winding is carried out without folding a fishing line for a trimmer. They rotate in the direction indicated on the corps of the spool, and the free end of the cord is temporarily fixed in the slot on the case.

Useful advice: act carefully when winding the fishing line, do not pull it so that it does not sit in the coil very tightly. It is necessary to ensure its free move for subsequent stretching.

After the fishing line for a trimmer is windpoint on the spool, it is necessary to assemble the case. The coil is placed so that the ends of the fishing line can be pulled out at the weekend of the trimmer head. Slopes in the spool, where they were temporarily inserted, will not let them slip. If there are no such slots, hold the ends with your fingers when you place the coil in the body.

Advantages and disadvantages

It should be slightly said about the strengths of the gasoline trimmers of the aforementioned manufacturer. The main ones can be called the subsequent:

The presence of a two.stroke engine with a power of more than three horsepower, having air cooling and electrical firing; A tank made of translucent plastic, which allows you to know exactly how many fuel was spent during operation; The opportunity for a person to work is comfortable-this is obtained due to the presence of an ergonomic handle according to the type of bicycle and a special mechanism of extinguishing various kinds of vibrations; Here, a high.quality cutting headset is used in the form of a cutting knife and fishing line of the highest strength; A wide capture of 25.5 cm is also used here, which makes it possible to perfectly and rapidly mow grass, shoots and other greens; A protective casing that protects a person from the hit of mowed grass, pebbles and various garbage; Shoulder belt, which allows the operator to work for a long time and not feel lethargy;Simplicity of maintenance and work. the mechanism of work and the device of models from Huter is very ordinary, which will allow simply to understand their implementation even a little.known person; Reliability-such a gasoline trimmer for the grass can work for a long period of time without stopping, with all this it does not heat up due to the features of the air cooling system; The possibility of unhindered movement around the site. taking into account that gasoline trimmers for grass, unlike electronic ones, are completely independent of the presence of a socket, which guarantees a person freedom of movement.

At the same time, there are a number of shortcomings that cannot be mentioned, but specifically: specifically: