How to remove the coil from the huter grass trimmer • CIMFLOK.COM

Grass trimmer coil device

Trimmer mowing heads come in a variety of designs, both simple and complex. The picture below shows an exploded view of a semi-automatic trimmer head from a Husqvarna (Husqvarna) brushcutter.

This type of head is present on most mowers and electric trimmers, such as STIHL (STIHL), Patriot (Patriot), Champion (Champion), Bosch (Bosch), Huter (Huter) and others. The device of the mowing head is quite simple. It includes the following details:

mowing head base;
button for semi-automatic cord feed;
bobbin (spool) into which the fishing line is tucked;
spring;
eyes. through them the line comes out;
trimmer head cover;
line (cord).

There are also simpler trim heads shown in the following photo.

All these attachments do not allow you to change the length of the line in a semi-automatic mode (after pressing a button). If the cord breaks, you have to stop the mower and change it manually.

Line does not extend automatically

If the line does not lengthen when you lightly hit the grass trimmer button on the ground, the reasons may be as follows:.

Option 1. a bite has occurred, i.e. clamping the cord between turns. This problem usually appears if the user has been winding the line on the reel unevenly, with intersecting turns, or winding it with insufficient tension. In the latter case, when the mowing head rotates at high speeds under the influence of centrifugal force, the cord begins to tighten, as a result of which inter-turn clamping of the fishing line is possible. To fix the problem, you will have to disassemble the coil on the trimmer and rewind the cord correctly, that is, in even turns with good tension.

Option 2. too short ends protrude from the head. The line may not come out when hitting the ground if the ends sticking out of the head are not long enough (short). In this case, the centrifugal force is not enough to stretch the line. Therefore, it is required to stop the unit (turn off the engine or disconnect the electric grass trimmer from the mains) and pull the line manually, after pressing the button.

Option 3. the line is brazed inside the mowing head. This causes the coil to lock and not spin when the button is pressed. Basically, this happens for several reasons: poor cord quality, coil overheating during prolonged operation of the unit, line hitting hard objects.

In the first case, third-party cord can be made of low-quality and low-melting materials that cannot withstand mechanical and thermal stress. Therefore, you should give preference to “branded” lines.
But, if you nevertheless purchased a fishing line of unknown quality, and it is often soldered during operation, then you can follow the example of some users who, after filling the cord into the reel, wet it with either silicone grease (from a can) or mineral oil. This procedure greatly reduces the likelihood of soldering the turns of the fishing line together.
Also, the line can be soldered if it hits a hard object (stone, fence, dry branch, etc.) during mowing. As a result, it stretches slightly and is pulled back into the head at high speed. From friction, the cord heats up, and its turns stick together. The only thing that can be done to correct this problem is to open the reel of the grass trimmer and rewind the line.

Major coil malfunctions

Electric trimmer and lawn mower users often face a problem with a semi-automatic mowing head. Coil malfunctions can be as follows:

the line does not lengthen automatically;
the cord spontaneously comes out of the reel.

How to thread the line into the spool of the grass trimmer

In order to wind the line, it will take about 10-15 minutes. What is a grass trimmer coil? Plastic body with a cassette inside, on which there is a special hook for easy winding of the fishing line. How to replace the cord with how to disassemble the coil from a gasoline engine know-how for a brushcutter. Almost all trimmer reels have a similar fastening principle, this is a central screw-button, when pressed, it becomes possible to pull out the line of the required length. How to remove the reel from the Huter grass trimmer to the grass trimmer video how to wind the line on. How to remove the coil from the grass trimmer, disassemble and disassemble the coil on the trimmer. The photo below shows a few examples of different trimmer spools.

The bobbins of the trimmers, the motor of which is located at the very ground, have a different attachment to the axis of rotation, they have two buttons on the spool located on the sides that need to be wrung out, otherwise the replacement of the thread is no different from other cassettes.

The principle of correct winding of the fishing line is similar in all of the above cases, therefore, for example, consider the standard version with two antennae.

To remove the spool with the fishing line, you need to unscrew the screw located in the center, but note that the thread is left there, so you will have to turn it clockwise, this was done on purpose so that during operation it does not open under the influence of centrifugal force.

Next, using a screwdriver, disassemble the head and remove the spool, onto which the fishing line is directly wound. Having measured the required length and folded in half, you need to tuck the fishing line into the spool, eventually bringing its ends opposite each other (for this there are special slots for fixing).

After that, it is necessary to assemble the head in the reverse order, threading the ends of the cord into two corresponding holes.

If you have any doubts or it is not entirely clear how to load the line on the grass trimmer, we recommend looking at how to properly wind the line into the lawnmower. In this video, step by step, the instructor will open the trimmer head, measure out the required amount of line, usually two to four meters, and demonstrate assembly and installation on a grass trimmer.

The grass trimmer, whether petrol or electric, is the only solution for mowing grass in tight spaces that a wheeled lawnmower cannot handle. As a cutting tool in trimmers, metal knives or a special line are used, which is tucked into the coil of the grass trimmer. But, unfortunately, trimmer heads become unusable over time during operation. Some malfunctions can be eliminated by hand, and some require a complete replacement of the mowing head.

How to remove the spool and replace the line

Trimmer owners, mostly beginners, find themselves in confusion, bordering on panic, when the need arises to change the cutter or line in the reel. Very often, when trying to unscrew the mowing head, users simply render it unusable, not suspecting that it is unscrewing in the opposite direction. To prevent this from happening, if you need to replace the tool, it is recommended that you read the step-by-step instructions below.

Switch off the brushcutter engine or power off the electric grass trimmer before threading the line into the spool to avoid injury from accidental starting rotation of the cutting tool.
Unscrew the attachment attached to the gearbox shaft. To do this, the shaft must be fixed by aligning the holes on the washer and on the axle, and inserting a metal rod or screwdriver into them.
Unscrew the nozzle. You should be aware that the thread on the shaft is left-handed. Therefore, turn the grass trimmer coil to the right, that is, clockwise.
Disassemble the mowing head. Most often, the head cover is attached to the clips. To remove it, you will need to sink these latches into the case, pressing the edges of the cover. If your trimmer has a semi-automatic mowing head with a button on the bottom, then the disassembly of the attachment should be done carefully, since you can lose the spring, which sometimes flies out when the cover is removed.
Cut off the required amount of line. Usually its length is 5 meters. Use a cord of the same diameter as indicated in the instructions for the tool. It is not recommended to exceed the maximum line diameter as this will result in increased engine load and higher gas mileage.
Find the midpoint of the line by folding it in half. You will have a loop.
Special grooves are cut inside the coil (there may be holes). Insert a loop of line into this groove.
Wind the line around the spool by turning it counterclockwise. It is necessary to fill in the cord as evenly as possible, the turns should lie down without overlapping and with good tension. When the winding is finished, leave free ends of the line about 20 cm long and fix them in the grooves on the sides of the reel.
Assemble the mowing head. Be sure to insert the spring and washer (if equipped) before final assembly of the accessory. Place the spool in the body and thread the ends of the cord through the holes or lugs.
Put on the cover and secure it with the latches.
Screw the adapter back onto the gearbox shaft, also securing it with a screwdriver. You will need to twist the grass trimmer coil to the left (counter-clockwise).

Manual petrol mower. How to remove and put a reel on a lawn mower! How to disassemble the grass trimmer coil. Replacing the line in the reel.

In this video, I show how easy and simple it is to wind the line on the reel of a hand-held mower yourself.

The cord lengthens spontaneously

There are times when the user of the grass trimmer notices a very fast line flow. At the same time, he never hit the ground with a button to lengthen the line. The reason that the line spontaneously lengthens, being cut on a special knife on the casing of the device, may be the absence of a spring in the mowing head. Often novice users of mowers, trying to load the line into the reel, forget to install the pressure spring in the head, or completely lose it when opening the lid, and in the future, do not even know about its existence.

Also, the line can be lengthened without using a button if the spring is loose. If checking the spring has confirmed this fact, then several washers must be placed under it in order to enhance its clamping properties.

How to change the line in the trimmer and which one is better to choose

Since we discussed the choice of a grass trimmer in a previous article, today we will tell you how to properly fill the grass trimmer with fishing line, and which one is better to choose based on the working conditions.

After you bought a grass trimmer and began to actively use it, sooner or later the question of replacing the fishing line will arise, since this is the most wearing element in the tool, intensive use of the grass trimmer will lead to frequent replacement of consumables.

Reviews of the main features and advantages of the model

the grass trimmer “Huter 1900″ has an impressive enough power, which is 1.9 kW. A knife or fishing line is used as a cutting element. The tank capacity is 0.7L and the line thickness is 2mm. Before purchasing this equipment, you should take into account that its weight is quite impressive. This is claimed by many novice users. Equipment weight is 7 kg.

A lawn is quite an attractive element of the site today. However, it will look good if you take good care of it. To do this, you should regularly water the area, feed it with fertilizers and cut the grass weekly. If you neglect the last condition, then rather quickly the territory will turn into dense thickets.

Reviews of the GET 1200SL electric trimmer

If you want to buy the Huter electric grass trimmer, then you can pay attention to the model that was mentioned in the subheading. Its cost is not so high and amounts to 5,000 rubles. The equipment, according to buyers, can be used for processing the lawn on the personal plot, as well as processing small areas. You can use the tool to cut grass even in hard-to-reach places such as along a fence or under benches.

The power of the unit is sufficient to perform tasks in everyday life and is 1.2 kW. The bar is collapsible, this, as buyers emphasize, simplifies not only storage, but also transportation. This example is ideal for women and the elderly, as the equipment is lightweight. weight is 4.5 kg.

How to remove or tuck the line into the grass trimmer

In order to wind the line, it will take about 10-15 minutes. What is a grass trimmer coil? Plastic body with a cassette inside, on which there is a special hook for easy winding of the fishing line.

Almost all trimmer reels have a similar fastening principle, this is a central screw-button, when pressed, it becomes possible to pull out the line of the required length. The photo below shows a few examples of different trimmer spools.

The principle of correct winding of the fishing line is similar in all of the above cases, therefore, for example, consider the standard version with two antennae.

Next, using a screwdriver, disassemble the head and remove the spool onto which the fishing line is directly wound.

Having measured the required length and folded in half, you need to tuck the fishing line into the spool, eventually bringing its ends opposite each other (for this there are special slots for fixing).

After that, it is necessary to assemble the head in the reverse order, threading the ends of the cord into two corresponding holes.

If you have doubts or it is not entirely clear how to load the line on the grass trimmer, we recommend that you look at how to properly wind the line into the lawn mower.

String Trimmer Ignition Coil Replacement #545046701

In this video, step by step, the instructor will open the trimmer head, measure out the required amount of line, usually two to four meters, and demonstrate assembly and installation on a grass trimmer.

Characteristics

Often searched	Inexpensive, For a summer residence
Grass trimmer type	Portable
Battery operation	not
Handle shape	D. figurative
Trimmer head / cassette included	Yes
Cassette revolutions, rpm	10000
Voltage, V	220
Mowing width (cm)	32
Line diameter	1.4
Grass trimmer blade	line
Weight, kg)	2.6 m
Electric motor power, W	600
Engine location	Upper
engine’s type	Electric
Brand name	Huter
The birthplace of the brand	Germany
Producing country	China
Guarantee	12
Stock	Pickup. 3% discount, assembly and testing for free

How to remove the coil from the grass trimmer with your own hands?

In this article, we’ll show you how to remove the coil from your grass trimmer. For electric and gasoline brushcutters, the mowing head is often removed to replenish the cutting thread, to install a spare disc with a different line diameter or shape, and to install cutting blades.

Any lawn mower is designed for regular replacement of the mowing head, so its design ensures, firstly, ease of operation, and secondly, secure attachment. This rule is met by the STIHL electric grass trimmer and the Chinese lawn mower.

Basic rules on how to remove the head from the grass trimmer

So how do you remove the head from the grass trimmer? This operation is performed as follows:

The coil is disconnected only when the petrol tool is switched off.
The cap of the coil is unscrewed, which holds the spring inside the coil.
Pressing the latches located on the sides of the cover, disconnect it from the brushcutter body.
The holes in the gearbox bowl and in the crankshaft hub are aligned with each other. Depending on the specific model, the holes are located on the bottom or side of the brushcutter.
Crankshaft rotation is blocked. To do this, insert a hex key or a regular steel rod into the hole of the gearbox.
The mowing bobbin is removed, which covers the screw.
The screw is unscrewed, depending on the specific model, with a slotted or Phillips screwdriver.
Hold the mowing head housing and loosen the screw. The latter is unscrewed counterclockwise.
The mowing head is removed. It is necessary to remove the coil without jerking in smooth movements, slightly shaking the disc from side to side.
The new reel fits onto the grass trimmer with the same smooth, rocking motion.
Re-assembling the grass trimmer.

The described operation with small variations is applicable to electric and petrol trimmers of all well-known brands. Husqvarna, Makita, STIHL, Partner, Champion, etc.

How to quickly and easily remove the line from the grass trimmer?

Here are some basic rules for removing the line from the grass trimmer. This operation should be performed to replace the cutting thread. Recall that fishing lines of different shapes should be used for mowing different types of grass:

Thin square-shaped threads. for leveling the lawn in front of the house;

The “star” thread is used for cutting dry and overripe grasses;

The twisted cord is installed when mowing large areas in which various types of grass grow;

Reinforced cord is used to combat young growth of trees and shrubs.

It is faster and easier to replace a spool of line than to wind a new thread onto an old one. over, in some cases it is simply impossible to do it.

So here are the rules and tips for quickly and easily removing the coil from an electric or petrol-type grass trimmer:

Before wedging the gearbox before unscrewing the mowing head, check the cleanliness of the hole. It may be clogged with grass debris. The hole must be thoroughly cleaned of grass residues. Otherwise, you will soon have to clean the gearbox.
If you are replacing a damaged coil, again, check to see if there are any plastic parts of the housing inside the hole in the gearbox. Even soft plastic can seriously damage the gear mechanism.
Buy branded reels or those that exactly fit your brushcutter model. Otherwise, there may be problems with the thread, and because of this you will not be able to install a new coil.
Most manufacturers use left-hand threads for trimmers. But there are exceptions to this rule.
When changing, the tool must be laid horizontally with the motor down.
The coil is removed only by hand without using any percussion tools (hammer, chisel, etc.). Their use can damage the body of both the mowing head and the brushcutter itself.
When installing a new coil, do not screw it too tightly to the body, since during operation the seat will become clogged with grass residues and dirt. This can make it difficult for you to change the mowing head next time.
Fitting to a grass trimmer, especially an electric grass trimmer, large-diameter line or cutting blades is allowed only if the manufacturer allows it in the operating instructions.

By following these rules and tips, you can easily change the mowing reel. And you don’t need to watch YouTube tutorials for this.

We will promptly deliver all your retail and wholesale purchases to any city in Ukraine.

How to replace line on a trimmer?

Replacing the grass trimmer line with step-by-step instructions will allow even an inexperienced lawn mower owner to perform a rather difficult job.

However, before starting work on changing the line on the trimmer, it is necessary to ensure the safety of the work. In particular, measures should be taken to prevent unintentional or unintentional starting of the mower:

exclude spontaneous start,
remove battery (if applicable),
place the tool on a platform convenient for work.

It is convenient to replace the grass trimmer line when the mower is on the table, and the foreman, who replaces the grass trimmer line, has the ability to approach the tool from any side.

Major coil malfunctions

Electric trimmer and lawn mower users often face a problem with a semi-automatic mowing head. Coil malfunctions can be as follows:

How To Replace A Coil On A Stihl FS Trimmer / Weed Whacker. with Taryl

the line does not lengthen automatically;
the cord spontaneously comes out of the reel.

How to repair a grass trimmer coil. master class

From the body of the clamping nut, the boot protection cap was wiped off and the boot itself fell out. The guide splines are clogged with grass and soil. Soaking and turning the bobbin by hand does not help

Grass trimmer coil device

Trimmer mowing heads come in a variety of designs, both simple and complex. The picture below shows an exploded view of a semi-automatic trimmer head from a Husqvarna (Husqvarna) brushcutter.

mowing head base;
button for semi-automatic cord feed;
bobbin (spool) into which the fishing line is tucked;
spring;
eyes. through them the line comes out;
trimmer head cover;
line (cord).

There are also simpler trim heads shown in the following photo.

All these attachments do not allow you to change the length of the line in a semi-automatic mode (after pressing a button). If the cord breaks, you have to stop the mower and change it manually.

Sources:

http://jusof.com/kak-snjat-golovku-trimmera-Huter-get-600/
http://benzo-zip.com.ua/kak-snyat-katushku-s-trimmera
http://door39.ru/remont/remont-katushki-trimmera-svoimi-rukami-kak-snyat-razobrat-pomenyat-lesku-sobrat-i-ustanovit-obratno.html

Grass trimmer coil device

Line does not extend automatically

Major coil malfunctions

How to thread the line into the spool of the grass trimmer

How to remove the spool and replace the line

Manual petrol mower. How to remove and put a reel on a lawn mower! How to disassemble the grass trimmer coil. Replacing the line in the reel.

The cord lengthens spontaneously

Similar video

How to change the line in the trimmer and which one is better to choose

Reviews of the main features and advantages of the model

Reviews of the GET 1200SL electric trimmer

How to remove or tuck the line into the grass trimmer

String Trimmer Ignition Coil Replacement #545046701

Characteristics

How to remove the coil from the grass trimmer with your own hands?

Basic rules on how to remove the head from the grass trimmer

How to quickly and easily remove the line from the grass trimmer?

How to replace line on a trimmer?

Major coil malfunctions

How To Replace A Coil On A Stihl FS Trimmer / Weed Whacker. with Taryl

How to repair a grass trimmer coil. master class

Grass trimmer coil device