How to remove the spool from a Bosch grass trimmer

Grass trimmer spool repair with your own hands

In this article, we will describe in detail the procedure of how to remove the grass trimmer spool. Step-by-step instructions with the attached video will help a beginner and an experienced user to independently remove the element of the system and clean it or replace it with a new one. Before you remove the coil trimmer for grass necessarily need to muffle. for gasoline models, or turn off the power. for elektrotrimmer. We will demonstrate one traditional disassembly scheme, but different models of trimmers may have different ways of attaching the spool to the tool. With your own hands you can not only remove the old model of the spool, but also change it for a new one, if the need arises. So, step by step scenario:

• Unplug the tool or turn off the engine (for chain saws).
• Carefully remove the spool cap that holds the coil spring in place.
• Press the pins symmetrically located on both sides with one hand and gently pull off the cover with the other.
• Look for the hole in the cup on the side or top of the gearbox and align it with the hole in the hub of the shaft.
• Using a hexagonal key or a metal rod put it through the gearbox hole, avoiding possible rotation of the shaft.
• We remove the mowing bobbin, on which a line for a trimmer is wound.
• At the bottom you will see a slightly sunk screw. It can be unscrewed with a Phillips-head or slotted screwdriver.
• Hold the head body with one hand and unscrew the screw with the other, counterclockwise.
• Slightly shake. remove the mowing head. Even if it is a little sour, apply delicately more effort and with the same wiggling. remove it. Often the movements are made in the hand of the clock, but there are also coils that unscrew in the other direction.
• Assembly takes place in the opposite sequence.

It is necessary to remove the bobbin when it is damaged, when the line is wound (which is undesirable and indicates an illiterate choice of tackle), as well as when you need to wind a new cord on a new spool or replace the cutting tackle. The “KosiKosa” store will always offer you an inexpensive reel for grass trimmer.

How to remove the grass trimmer head: basic rules

It is necessary to remove the trimmer head, adhering to the elementary rules in the work with a brushcutter and electric counterpart, and the main ones we will name:

• Clamp the reducer to unscrew the head with a special hexagon or gently with a screwdriver, dipping it into a special hole. The latter can become very clogged with grass and blend in with the overall color, so. delicately clean it and find it;
• It is imperative to jam so that the shaft does not rotate;
• Be especially careful when working with disassembling a broken or cracked spool. its elements can be all over the place;
• Many gasoline mower users today are searching the web for “grass trimmer to remove the head,” and we in instructive articles and videos also do Accent on different types of threads. consider the nuances of your tool;
• For ease of operation, it is practiced to turn the tool upside down with the motor, laying it on a horizontal surface;
• Shocks and harsh forces applied when removing the mowing head are inappropriate, as the plastic delicate housing can be damaged;
• Install a new reel or an old reel if it is still usable, on a cleaned tool.
• The new tackle must meet the parameters of the old one. Installation of another component, the characteristics of which do not meet the power of the grass scythe, can have a negative impact on its elements and the work of the mechanism as a whole;
• It is recommended to work with cleaned tools in order to avoid debris and small particles of grass in the holes;
• Locking the gearbox by sliding a screwdriver into the slot is a must when installing a new reel or removing an old one;
• Be aware of the prevalence of left-hand threads on the gearbox of most trimmers;
• Remember to remove the screwdriver from the gearbox slot when you have finished installing the spool in place;
• All fixing and removal should be done gently, remembering that the spool is made of thin plastic;
• Do not over-tighten the new coil (or the old one in its place) as it will be impossible to remove it after the next removal. You also don’t want to lock too easily. weigh the load placed on this assembly during operation and the resistance of the cutting material;
• If you need instead of the reel on the grass trimmer to determine the knife or bobbin. analog cutting tackle, then the gearbox block is also carried out, the twisting is carried out on the same scheme, but the installation itself is slightly different due to the specifics of each individual tackle. Mount knives on the grass trimmer with a reel in the case when the tool functionally works with different types of tackle.

If you need to buy a fishing line for your grass trimmer, you can do it on our site, and how to properly mount and replace it. we are happy to tell you in our articles.

What kinds of fishing lines are available?

A commonly used line that fits on virtually all coil types is the round cord. video : how to disassemble the grass trimmer reel. Changing the line on a trimmer. Video how to disassemble the reel to change the line on the trimmer. Download more similar videos. This is a common trimmer line, suitable for mowing succulent grass, but it will be much more difficult to mow dead grass with it, and it will certainly not cope with bushes.

As a rule, the diameter with which you can mow young grass does not exceed 1.6 mm. The thicker the thread, the rougher the grass it can overcome.

There are lines with sharp edges in the form of a star or square, such a variant is more adapted to mowing dry grass just at the expense of having sharp edges, but its disadvantage is more wear and on the strength it is inferior to a round cord.

there are lines with improved aerodynamics with characteristic indentations, scales and notches, such a product makes less noise, but it is used only on petrol-powered mowers, because it is difficult to get such thread out of the spool, it is used most often with discs, in which pieces are inserted. The disadvantage of this product is its fragility.

Most often in gasoline trimmers with an engine more than 1.5 liters.с. they use cords with a metal cord inside. This video shows how to disassemble the coil in a gasoline trimmer for grass, as well as how to properly wind it. How to remove the spool to disassemble the spool on the trimmer and rewind the disk on the shaft. This thread is ideal for mowing dry grass and small shrubs. How to Disassemble the Grass Trimmer Reel. Replacing the fishing line on the trimmer. The presence of the core, positively affects the durability of this material. The disadvantage of such cord is its price, which is significantly higher than the above listed opponents.

How to tuck the line for trimmer into the grass trimmer spool

It takes about 10-15 minutes to wind up a line for a trimmer. What is a grass trimmer reel? A plastic body with a cassette inside, which has a special hook for easy winding of fishing line. How to replace the cord on a how to disassemble the reel in a gasoline prisnis znayomii string trimmer. Almost all trimmer reels have a similar fastening principle, this is the central screw-button, when you click on it, it is possible to pull out the line for the trimmer of the required length. How to remove the spool from a grass trimmer Huter on a grass trimmer video how to wind the line for a trimmer on. How to remove the spool from the trimmer for grass, disassemble the spool on the trimmer. A few examples of different spools for trimmers are shown in the photo below.

Reels of trimmers, the motor of which is at the ground, have a different attachment to the axis of rotation, they have two buttons on the reel, located on the sides, which must be pressed, otherwise, the change of thread is no different from other cassettes.

The principle of winding the line correctly is the same in all of the above cases, so let’s take the standard version with two clamps as an example.

To remove the spool with the line you need to unscrew the screw, located in the center, but note that the thread there is left, so you have to turn it clockwise, this is done on purpose, so that during operation it is not opened under the influence of centrifugal force.

Next, using a screwdriver, disassemble the head and take out the spool, on which directly winds the line for the trimmer. Measuring the required length and folded in half, you need to tuck the line for the trimmer into the spool, bringing, as a result, its ends opposite each other (for this there are special slots for fixing).

After that, you need to assemble the head in reverse order, passing the ends of the cord through the two corresponding holes.

If there are any doubts or it is not quite clear how to charge the line for the trimmer on the grass trimmer, we recommend to see how to correctly wind the line for the trimmer in the lawnmower. In this video the instructor will open the trimmer head in detail on the steps, measure the necessary amount of fishing line, usually it is from two to four meters, and demonstrate the assembly and installation on the trimmer for grass.

Grass trimmer, whether it is gasoline or electric, is the only true solution for mowing grass in hard-to-reach places, with which a wheeled mower cannot cope. As a cutting tool in trimmers use metal knives or a special line for the trimmer, which is tucked into the grass trimmer spool. But, unfortunately, trimmer heads do not work properly over time. Some faults can be corrected with your own hands, while some require complete replacement of the mowing head.

What kind of lines are there?

A common type of fishing line that fits virtually all types of reels is the round cord. video : how to disassemble the grass trimmer reel. Changing a line on a trimmer. Video how to disassemble the reel to change the line on the trimmer. Download more similar videos. This is a common line for trimmer, suitable for mowing lush grass, but it will be much harder to mow dead wood with it, and it certainly will not cope with bushes.

As a rule, the diameter with which you can mow young grass does not exceed 1.6 mm. The thicker the thread, the rougher the grass it can overcome.

There are lines with sharp edges in the form of a star or square, such a variant is more adapted to mowing dry grass just at the expense of the available sharp edges, but the disadvantage is its greater wear and on the strength it is inferior to a round cord.

There are lines with improved aerodynamics with characteristic dents, scales and notches, such a product makes less noise, but it is used only on benzokosa, since the output of such thread from the spool is difficult, it is used most often with discs, in which are inserted segments. The disadvantage of this product is its fragility.

Most often in gasoline trimmers with an engine more than 1.5 liters of power.с. use cord with a metal cable inside. In this video I show you how to disassemble the spool of a gasoline trimmer for grass, as well as how to properly rewind. How to remove the spool to disassemble the coil on the trimmer and rewind the disk on the shaft. This thread is ideal for mowing dry grass and small bushes. How to disassemble a grass trimmer reel. How to change a line on a trimmer. The presence of the core, has a positive effect on the durability of this material. The disadvantage of such cord is its price, which is significantly higher than the above listed opponents.

How to put the line for trimmer into the grass trimmer reel

It takes about 10-15 min. to coil a line for a trimmer. What is a grass trimmer reel? A plastic body with a cassette inside, which has a special hook for easy winding of the fishing line. How to replace the cord on how to dismantle the spool in a gasoline trimmer. Almost all trimmer reels have a similar attachment principle, this is the central screw-button, when you press it, it is possible to pull out the line for the trimmer of the required length. How to remove the spool from a grass trimmer Huter on a grass trimmer video how to wind the fishing line for a trimmer on. How to remove the spool from the grass trimmer, disassemble the spool on the trimmer. The photo below shows several examples of different trimmer reels.

Bobbins trimmers, whose motor is at the ground itself, have a different attachment to the axis of rotation, they have two buttons on the spool, located on the sides, which must be pressed, otherwise the change of thread is no different from the other cassettes.

The principle of the correct winding of the fishing line is similar in all of the above cases, so for example let’s consider the standard version with two tendrils.

To remove the spool with a fishing line it is necessary to unscrew the screw, located in the center, but note the thread is left, so you have to twist clockwise, it is done on purpose, so that during operation it is not opened under the influence of centrifugal force.

Next, using a screwdriver, disassemble the head and take out the spool, on which directly winds the line for the trimmer. Having measured the necessary length and folded in half, it is necessary to tuck the line for the trimmer into the spool, bringing out, as a result, its ends opposite each other (there are special slots for this purpose).

Afterwards it is necessary to reassemble the head in the reverse order by sliding the ends of the cord through the two corresponding holes.

If there are any doubts or it’s not quite clear how to charge the line for trimmer on the grass trimmer, we recommend to see how to correctly wind the line for the trimmer in the lawnmower. In this video, the instructor will detail the trimmer head step by step, measure the required amount of fishing line, usually two to four meters, and demonstrate the assembly and installation on the grass trimmer.

Grass trimmer, whether it is gasoline or electric, is the only true solution for mowing grass in hard-to-reach places, which wheel mowers can not cope with. As a cutting tool in trimmers use metal knives or a special line for the trimmer, which is tucked into the grass trimmer spool. But unfortunately trimmer heads do not always work properly over time. Some malfunctions can be repaired with your own hands, and some will require a complete replacement of the mowing head.

Changing the strand on a trimmer

If the grass trimmer spool button lightly strikes the ground, the line for the trimmer does not lengthen, the prerequisites for this happen the following.

Variant 1. there is a jam, i.e.е. 2. the cords are jammed between the coils. This miscommunication usually occurs if the user has wound the line for the trimmer on the spool unevenly, with crossed coils, or has wound it with insufficient tension. In the latter case, when the mowing head rotates at high revolutions, the cord begins to tighten under the influence of centrifugal force, which causes you to inter-twist the line. To fix the problem you will need to disassemble the spool on the trimmer and rewind the cord correctly, in other words, even turns with a good tension.

Option 2.7. very short ends are sticking out of the head. The line may not come out when hitting the ground, if the line ends sticking out of the head are not long enough. Here the centrifugal force is not enough to stretch the line for the trimmer. Because it is required to suspend the unit (to shut off the engine as it is also called to disconnect trimmer elektrichesky for grass from the network) and pull the line for the trimmer manually, for earlier pressing the button.

Variant 3. the line for the trimmer is soldered inside the mowing head. This leads to the fact that the coil stalls and does not even spin when you press the button. In the main, this happens for several reasons: poor quality cord, overheating of the reel during prolonged use of the unit, the strike of the line on solid objects.

• At the beginning of the cord postoranyh manufacturers you like it better made of low-quality and fusible materials that do not hold the mechanical and thermal load. That’s why you should give preference to “branded” lines.
• If you still caught the line for the trimmer unknown properties, and it often soldered in its time of operation, it is possible to follow the example of certain users, who after filling the cord in the coil or lubricate it with silicone grease (from a spray bottle), or mineral oil. This procedure greatly reduces the possibility of soldering the coils of fishing line to each other.
• Also, a line for a trimmer may meld if, at the time of mowing, it bumps into a hard object (a rock, a fence, a dry branch, etc.) and the line breaks.д.). Once this is done, it is stretched a little and pulled back into the head at a high rate of speed. The friction causes the cords to warm and the string coils to stick together. The only thing to do to fix this malfunction is to open the grass trimmer reel and rewind the trimmer line.

The stringline is a mowing head is one of the grass trimmer’s executing mechanisms. It is designed for mowing grass and constructively represents a special spool (reel) of which the cutting cord (string, line for trimmer) stick out in different directions. The string is a consumable that must be replaced during use. Based on the design and operational features of the grass trimmer, manufacturers equip their products with a variety of head types. from simple manual reels to complex automatic reels. The more complex the device of this mechanism, the more likely it will break. What to do if the spool does not spin, the string does not feed or breaks, as well as other malfunctions. in the material below.

How to tuck the line for the trimmer into the grass trimmer reel

It takes about 10-15 minutes to wind the mowing line. What is a grass trimmer reel? Plastic body with a cassette inside, which has a special hook for easy winding of the fishing line. Almost all trimmer reels have a similar attachment principle, it is a central screw button, when pressed it becomes possible to extract the line for the trimmer of the desired length. The photo below shows several examples of different spool trimmers.

The pins of the trimmers, whose motor is located on the ground, have different attachment to the axis of rotation, they have two buttons on the spool, located on the sides, which must be unscrewed, otherwise the thread change is no different from the other cassettes.

The principle of proper winding of the mowing line is similar in all of the above

cases, so, for example, consider the standard version with two antennas.

To remove the spool with a fishing line, you need to unscrew the screw, located in the center, but notice that the thread has remained there, so you have to return it clockwise, this was done on purpose, so that during the work it does not open under the action of the centrifugal force.

Next, using a screwdriver, remove the head and remove the spool, which is directly wound string

Measuring the required length and folded in half, you need to insert the line for the trimmer into the spool, finally bringing its ends opposite each other (there are special slots for this).

Then reassemble the head in reverse order, breaking the end of the cord into the two corresponding holes.

If you have any doubts or are not quite sure how to load the line for the trimmer on the grass trimmer, we advise to take a look at: how to correctly wind the line for the trimmer in the grass trimmer. In this detailed, step-by-step guide, the instructor will open the grass trimmer head

, Measure the required amount of mowing line, usually two to four meters, and demonstrate the collection and installation on the grass trimmer.

How to remove the head on a BlackDecker GL716 trimmer.

The grass trimmer has an overhead motor and a curved boom. For convenience we turn it upside down with the motor or lay it horizontally. Disassembling the mowing head. To do this, simultaneously push down on the side latches and remove the top cover. Disconnecting the spool of the mowing line

READ How to Repair the Starter on a Brait Trimmer

Slightly recessed dark screw visible in the middle of the head body. We fix the head body with one hand and using the sprocket, unscrew the screw counterclockwise. If you don’t have a sprocket handy, you can do it with a wide flathead screwdriver.

Now to remove the grass trimmer head, just pull it toward you. If it is sour and stands firmly in place, apply effort with light jiggling motions, changing places periodically. Do not use force or impact. The body is plastic, and it is easy enough to damage.

What you need to replace the filament

With regular use of the grass trimmer to cut the grass, the discs blunt, but they can be sharpened and continue to operate. Line for the trimmer in the coil tends to run out, so there is a need for new filling, for which you need to determine the type of head and to prepare the cord of the required thickness and length.

So, the mowing head is a cylindrical body that houses the bobbin with a fishing line. Such detail is present both on electric trimmers and gasoline mowers of any brand, whether it’s Bosch, Makita, STIHL or other brands. Heads come in three types depending on how the line is threaded and fed.

• The principle of operation of the automatic group heads is that they independently feed the line for the trimmer when the mower reduces the revolutions of the motor. Such designs are convenient when working on large areas, but have the disadvantage of high cord consumption.
• The heads of the semi-automatic group are easy to use. the automatic filament feed is performed at maximum engine speeds. To loosen the filament lock, you need to gently tap the tool on the ground, and then the unlocked filament slides out of the spool. Cut to the required length with a knife attached to the blade guard.
• Grass trimmers with manual cord feed need to be turned off beforehand, then pull out the line for the trimmer yourself.

Also to Note! The most convenient and best-priced cord pulleys are semi-automatic.

Reels for electric and gasoline-powered mowers can be with one or two line tendrils. The first type is used for cutting lower grass growth, the second type for high growth grass and small bushes.

Repair ‘electric mower Gardena (change the spool)

The guaranteed output of a factory grass trimmer will inevitably require a change in the mowing line. With a very rough idea of how to enter the trimmer line into the grass trimmer spool by themselves, beginners are reluctant to go into this business. But, with some ability, mastering this simple science is not difficult, and similar instructions below will greatly facilitate such a process.

First of all, to wind the fishing line for the trimmer, you need to remove the spool (bobbin, spool) from the grass trimmer; certain steps will depend on the complexity of the configuration and the type of product itself:

READ Can I mow with a trimmer after rain

Small electronic grass trimmers with the motor operating position and spool at the bottom, you have side buttons on both sides of the bobbin. When pressed at the same time, the upper part of the spool along with the inner m for winding the fishing line is turned off, although the lower.

The video focuses on the problem of changing the mowing line in grass trimmers, it will be of interest to anyone who deals with such devices. In front of the audience appears a man in work clothes, who promises immediately, and at the same time detailing the way of manipulation, necessary if you set out to change or wind the line for trimmer.

The hero is attracted by how important it is to first get a quality line for the trimmer, then it will be reliable and will last a long time. Then the man points out how to easily remove the old line for the trimmer, then he shows the very one he already has. Going to.

How to change, remove the BlackDecker GL716 electronic grass trimmer head when repairing, that is, changing.

BlackDecker GL716 electric grass trimmer was brought in for repair. By his example, we will show how to remove the head, trimmer head for grass, Kosilna head, in different sources call it differently. If you set out to remove the grass trimmer head, it needs to be disassembled. To do this, release the side latches that are symmetrically located on both sides. We press two fingers there, with the other hand, gently shaking it off the top cover. Take out the bobbin to wind the mower line. We can see the screw is a little deeper. A sprocket or flat socket. Holding the body of the mower spool with one hand, unscrew the screw counterclockwise. Swinging from side to side, pull the body of the Mowerhead reel only toward you. Now you understand how to change, remove.

Types of semi-automatic heads

The mowing head is of the semi-automatic type. Generally consists of a housing with several springs and a bobbin inside. Spools, by design, are divided into:

Many home trimmer owners convert single-section bobbins to two-section bobbins. To do this, you will need to find a solid metal plate, and put it on a contour with the diameter of the bobbin. After that the plate is cut on the contour so that the thickness is near the place of winding the cord. As a result, the resulting circle should move freely around its axis. Next, it is necessary to make a cut on the obtained ring and slip the bobbin inside the ring. The two parts are connected by means of tape or quickdrying glue. As a result, the manufacturer will have a bobbin in which the line for the trimmer can be wound in two sections.

Classification according to the method of charging the cord

Another important factor is how the line is threaded into the mowing head. According to this factor, there are the following types of reels on the market:

• fast. to charge this type of devices for the operator who uses them does not need to remove the headset from its base. It is sufficient to gently push the cord through to the center of the spool and wrap it several times around the base. It’s convenient and saves a lot of time;
• collapsible. in order to replace the cord of this type of reel you will need to disassemble. Beginning gardeners may have problems with this procedure, but after gaining the necessary experience, later charging the head will be much faster.

As practice shows, for the novice gardener, the fast reel on the grass trimmer is the best. It stands out for its durability and can be used extensively in areas with lots of hard obstacles.

Review: Bosch ART 26 EasyTrim electric grass trimmer. A quality grass trimmer for the cottage

I didn’t have much luck with trimmers last year. My Bosch ART 23 EasyTrim grass trimmer, after serving me for many years, broke. After that, I bought a trimmer for grass Bosch ART 30 CombiTrim and Electric grass trimmer Huter GET-600, both quickly failed, and I gave the warranty, after which I decided not to experiment and took almost the same trimmer for grass, as the first Bosch, but with a slightly larger diameter for cutting.

Ordered, as well as the last two in Yulmart close to the fall last year, around August. It worked for about a month at me last year, and so far it successfully works this year, so it is safe to express the opinion of this model trimmer for grass. The grass trimmer was in a standard box for this trimmer series.

It was actually a little bigger than the previous model, and in the box it was disassembled.

But once joined once parts of the trimmer for the grass will not dismantle forever. They are fastened securely and permanently.

The cover also had to put it on by itself, and I won’t take it off again, though it is possible.

And this is the reel I have been familiar with for a very long time. For me, this is the most familiar design.

With years of experience using these reels, I know the pros and cons. it is quite convenient to wind the trimmer line on such a spool, you can use a trimmer line up to 2 mm thick. New spool ejects line for trimmer when it hits the ground. Over the years, the middle part, the semi-transparent ring wears out, as it did with my previous trimmer. Bosch ART 23 EasyTrim and 26 reels are exactly the same and interchangeable, but it is problematic to order a replacement, although theoretically possible. I never waited last year, I ordered it and it never arrived. The line for the trimmer is fixed and winds up easily.

The reel is ready to cut the grass. The fishing line lasts a long time. On tough grass and branches trimmer line breaks partially, but while the grass trimmer is new, the trimmer line is well thrown out, I prefer to turn the grass trimmer, check the trimmer line, and lightly pushing on the head, it extends.

The reel is very easy to reassemble, until it just clicks into place.

I like this reel arrangement the best.

If you compare with the previous Bosch ART 23, this grass trimmer is a little bit larger in diameter mowing, which is a plus, but the boom was shorter, strangely enough. The boom is not extendable. seems to be a minus, but. I’ve tried two grass trimmers with retractable booms before and they always moved and folded while working. So the fixed bar is more reliable in work. The grass trimmer is not long, just right for my height of 164 cm. It is not convenient for a tall person to work with it. Bosch ART 26 is shorter.The push button on the handle doesn’t lock, you have to mow while you hold it. Sometimes, when carrying the occasional trimmer to include the grass, a small minus.

It has three centimeters more mowing diameter, but it’s an undeniable plus for work, the power is the same, 300 Watts, it consumes little power, and the output is quite enough.

The grass trimmer handles low grass at a time.Up to.

What I do not like the device grass trimmer, the hood is clogged with finely chopped grass, grass trimmer is immediately heavy, and as it works, it has to be removed manually.

trimmer to cope with grass and excellent with thickets of grass, but I prefer to cut brush with secateurs, otherwise the line to the trimmer will always break.

I don’t have time to mow, the grass is almost up to my waist.