How to saw a car for scrap

scrap

How to saw the machine for scrap

A resident of the Stepnovsky district, who came to Pyatigorsk, was left without a car. According to the press service of the regional department of the Ministry of Internal Affairs, a local resident was involved in the disappearance of the car.

According to the department, the car owner parked in one of the streets of the resort town and went out for a while, leaving the key in the ignition. When he returned, he found that the car was not there.

The identity of the thief was established. he was a 19-year-old local resident. It turned out that, passing by a domestic car, the attacker noticed the keys in the lock, and decided to take advantage of the situation.

“The perpetrator got behind the wheel of the vehicle and fled”. told the police.

Scrap Mechanic Survival | HowToBuild. Rock Mower 2.0. Tutorial

After a while the guy sawed the car into several parts and sold it for scrap metal. He spent the money on himself.

As a result of these actions the car owner suffered damages in the amount of 50 thousand.

scrap

The hijacker has been detained and accused of theft. The investigation continues.

What is a car theft??

The construction car is a complete car, which was dismantled abroad into several parts (engine, body and chassis) in order to pass the customs at lower tariffs.

This option can be used only if you already have the same foreign car, but it is due to a number of reasons has fallen into disrepair, or you have specifically purchased a non-working machine. You can’t get a DTC for an imported construction car, that’s why you need another car registered in Russia.

The vehicle is delivered as a complete package from Japan to the place of customs clearance, and then dismantled into parts. After passing through customs, the constructor is assembled, and the buyer is given the following documents:

It is currently possible to register under the old documents only frame cars and on the condition that the existing TDS also lacks the body number.

Since the end of March 2018, the duty on the import of the constructor has been significantly reduced. At the same time, the Russian government has adopted a regulation prohibiting the registration of cars in which the manufacturer cannot be identified due to the lack of numbers on the replacement parts.

How to saw a car properly

  • Search by auctions
  • Old version
  • Sales statistics
  • Consultation
  • How to buy
  • Conclude the contract
  • Delivery in regions
  • Spare parts order
  • Automobiles in Stock

Unbelievable car collection hidden in the forrest, I buy my dream car!

  • Determination of production date
  • Saw cut/construction
  • How to Read an Auction List
  • Sawing, Carpentry, Constructor
  • Timetable
  • Auto auctions in Japan
  • Q&A
  • Write to the Management Team
  • Addresses and contacts of the bonded warehouse

“Raspils”, “Karpils”, “Constructors”

Our company has been working in this area since 2009. Service of this kind will allow you to buy a quality Japanese car is absolutely inexpensive. In turn, our company guarantees you high reliability of our services. Our reputation is confirmed by the numerous testimonials of grateful clients. Please contact us and we will help you buy a car for a short time and reasonable price!

Briefly about the “sawing”. the car body is divided into 2 parts by cutting the body along the windshield or rear window posts (luggage compartment) and the body floor. The place where the body will be cut. indicates the client (the back or front of the car). Glasses are removed, all wiring that goes in sections, as well as cables, hoses and tubes are removed, and remain intact on one part of the body. A frame car is divided into parts only the body, the frame remains intact. After customs clearance body parts can be welded together, the seams are plastered and painted, or if the car is needed for parts for the convenience of its transportation parts are fastened with metal plates. staples.

Terms of delivery

Delivery time to Vladivostok from the time of purchase 20-25 days, customs clearance 3-7 days, collection 4-7 days, the period of shipment to the region depends on the availability and occupancy of trucks and transit time.By experience, the average delivery time for a cut in the region is 1-2 months.

The process of disassembly and assembly, welding, painting of the “saw”

Car disassembly and sawing is done in Japan on shore in a workshop or on a ship, as many companies do. The sawing of your car will be done by professionals who have already sawed through more than one thousand cars.We have been harvesting sawn timber since it first appeared, and we already have experience in this area. To date, in our opinion, we do the highest quality assembly of saws in Vladivostok. Our saw assembly differs from other companies in that:1. All layers of metal are welded. Т.е. the place of the cut is expanded and welded 2-3 layers of metal (depending on the design of the car) 2. Places of welding are treated with rust preventing agent 3. Installing extra stiffening in the welds. Simply put, additional iron is welded in, which increases the stiffness of the welding area;4. The bottom of the weld is sealed with sealant;5. In the passenger compartment the welded seams are covered with noise isolation or sealant;6. All necessary places are painted over. If you watch the machine and do not know that it is sawing, the person “uninitiated” is unlikely to find places of welding.7. Cars assembled here do not fall apart or crack. So far not a single car assembled by us has had serious problems. Many of the cars assembled in our company for quite a long time go everywhere in Russia. Many vehicles, assembled in our company, are driven to other regions along our roads and are successfully used in the future. And the test of the “route” Vladivostok. Moscow is a significant proof of the quality of the assembly.

What’s in a car?

Parts that prevent disassembly are removed and put neatly back in the car. Nevertheless there are certain nuances, the car is still sawn and partially disassembled, so you should take it into account. For example, when the windows are removed and transported, they often break, so we are not responsible for the safety of the windows. In the process of shipment all removed parts are put in the car interior, of course we try to put everything as neatly as possible, but when our customs officers inspect the car no one is very careful with the spare parts and the glass could easily break if you move the parts in the cabin. There are also some parts of the car, which can not be removed without damaging, these nuances depend on the model of the car. On this please note that the car is sawn and dismantled. Please note, we are not responsible for missing or damaged parts as a result of disassembly and sawing.

Often we get the question “is there any other way to saw the car??”. Basically it is possible to cut as you say, but you should understand that the existing patterns of cutting are invented for a reason, and to cause minimal damage to the car and reassembly was less of a problem. If you do not need the assembly of the car, but just need parts, when ordering, please specify what you want to get. “Sawing off just the trunk” won’t work, customs won’t consider it sawing, so it makes no sense.

Please note, we do not deal with registration in the GAI “saw” and do not sell PTS.

Having ordered a cut in our company after customs clearance in Vladivostok you get into possession of the following documents:CCD (Cargo Customs Declaration) on the engineGCD (Cargo Customs Declaration) on the frameGCD (Cargo Customs Declaration) on the front and rear of the body ACD (Sales Contract)

What’s being imported now?

There are four basic methods of importation:1. Constructor2. Car disassembly by “Sawing” method3. Dismantling a car using the Half-Cut method4. Dismantling cars into pallets

scrap

The auto “Sawing” diagram

An example of a “Half-Cut” auto dismantling scheme

If you need to drill a hole with a large diameter, don’t rush to try to do it with a core cutter for drywall, wood or even concrete. Let’s say, a diamond drill (for concrete) you can still pass the side of the tire, although it is extremely difficult, but pobeditovaya cutter you can not do anything at all. it will tear the rubber. In such situations, it’s best to use stepped drills of the right diameter.

Step drills, most often made with a diameter of 4 mm to 40 mm, but on the market of power tools are also found models from 4 mm to 80 mm (they usually reach 85 mm in length without a shank). The shank of such a cutting device is usually made with a diameter of 10-12 mm, because metal is subjected to great mechanical stress while in operation. The stepped drill can be fitted into the chuck of an ordinary drill and even a screwdriver with a 10 mm shank, but the cordless power tool needs a good battery to work with the taper drill.

Preparing

In order to sell the car body for scrap you need to be prepared beforehand.

  • Dismantling windows and the interior as a whole. At the recycling point will agree to pay only for the weight of the metal, so you need to remove the glass. This involves the windshield, rear and door packages. This can also include interior furnishings (seats, etc.). д.). this way you reduce the percentage of blockages.
  • Remove the body from the car. For this you will need the help of a knowledgeable person, or personal disassembly experience. The fact is that this kind of dismantling requires knowledge about the structure of the body and the car as a whole. Improper dismantling may not only damage parts of the vehicle, but also injure yourself.
  • Since the car body is a fairly oversized thing, you need to saw it. If you decide to scrap car body, you can do it at home with the help of an ordinary “angle grinder. Certain body parts, such as doors, hood, etc. п., you can easily remove. It is also possible to call a crew from the collection point, which will dismantle and “dissect” the body on their own and without any problems. It is worth noting that firms may charge extra for such services.

What can be used to cut rails?

How to cut the rail at home?

So, how to cut the rail in this case: you need to put its edges on a pair of supports and place a gypsy (or other thick enough) sewing needle on the calculated place of the break and across the profile. Then take a sledgehammer and hit exactly at this point, but strongly and accurately.

How to cut the rail with a chisel?

  • The rail edges are installed on the two supports with the base down;
  • A thick sewing needle is placed perpendicular to the intended place of the break;
  • the sledgehammer makes a strong and accurate blow to the contact area of the needle, resulting in the rail is cut in half.

How many discs does it take to cut a rail??

A professional tool will save time cutting the rail. Experienced people say that two discs with a diameter of 150 mm is enough to saw a classic rail (P65, P75). The work is performed similarly. the base is notched on both sides, then follow with a sledgehammer.

How to break rails correctly?

  • Put the rail on a horizontal surface;
  • If you want a precise cut, it is worth using a chisel to make notches on the base;
  • Saw through the base on both sides to the rail neck;
  • put a stop under the notch;
  • to make a pointed blow with a sledgehammer.

How much does one meter of rail weigh??

The standard length of railway rails R-65 is 12.5 m, and 1 meter weighs 64.88 kg.

How to cut metal without electricity?

  • Breaking metal with bending
  • How to cut metal with a chisel and hammer
  • Method 3 Using a vice and hacksaw for metal
  • How 4 Cutting with an electric jigsaw with a metal saw.
  • Way 5 We cut with metallic scissors
  • Metal cutting with angle grinder
  • Method 7 Cutting with a sabre saw
  • Way 8 Using pipe cutter

How much does a meter of narrow-gauge rails weigh??

Technical requirements for narrow-gauge rails are set out in GOST 5876-82, the construction, dimensions and other characteristics listed in GOST 6368-82. Weight of 1 (m) rail: 17.91 (kg).

How to cut thick metal in the field?

  • Laser metal cutting
  • Metal plasma cutting
  • Metal bending
  • Rolling metal
  • Rotary drawing
  • Welding
  • Mechanical processing of metal
  • Shot blasting

What is the best way to cut a channel?

The channel can be cut with an angle grinder, an oxyfuel cutter, and a couple of other ways, let’s look at all of them.

Is it possible to saw the rail with a hacksaw?

With what to cut the rail is quite realistic, although not to say that so quickly and easily. the method is quite time consuming.

With what can cut the iron?

  • Usually metal is sawn with a regular hacksaw
  • Thin sheet metal can also be cut with special metal scissors
  • A modern and effective way. sabre saws. a professional toolmet metal blade which is fixed in a solid housing.

The problem of recycling old cars

There are almost 40 million registered cars in Russia. And almost 50% of them are older than 10 years. So we can draw a conclusion that in our country there are several millions of cars that are practically out of use. Nevertheless, their owners have to pay tax and other contributions.

Besides, there are a lot of cars which were damaged in a car accident. They require long and expensive repairs, so owners often decide to scrap it because it’s easier and more profitable.

Thus, there are several reasons:

Don’t wait until the car is rusted through. Instead, you should go through a certain procedure that will help solve the problem.

Features and complexities of disposing of an old vehicle

Car removal and delivery of the car for scrap in SPb is not the only option of refusal of an old vehicle. Depending on your own preferences and abilities, car owners choose the following methods:

  • Advertise in newspapers and electronic boards, hoping to sell the car and have it reissued to another buyer. can vary greatly, but in most cases the cost of vehicles is minimal.
  • License plates are cut off from the body and the power unit, and after the registration in the State Traffic Safety Inspectorate the car is either thrown in the street or given as scrap metal.
  • Some companies accept a car in payment for a new vehicle, if the customer has such a possibility.
  • Dismantling a car or selling it yourself for parts.

The main risk for owners is the use of license plates and engine by swindlers. That is why scrapping an old car must be accompanied by registration of documents at the State Traffic Safety Inspectorate, removal of the vehicle from the tax register. When choosing a scrapping company, it is better to give preference to reliable and trustworthy organizations with an impeccable reputation, even if the conditions of accepting the vehicle are less favorable than the market average.

Scrap metal seekers found a radioactive waste dump near Kropivnitskiy

The Pamir radar station was built on top of Mount Tomnatik at an altitude of 1,565 m above sea level. Combat duty in 1960-1989 on the Pamirs was round the clock. The military monitored all the planes that flew over the Soviet borders. In the 1990s, the station fell into disrepair, and the huge domes turned into shelters for tourists or a place to sleep for cattle.