Method 1 of 3: It is usually located on top of the oven. Press the “Panel lock”, “Lockout” or “Lockout control” button. Hold it down for three seconds. Wait for the beep that indicates that the panel is unlocked.
Press the “Select” button until “SAFE” appears on the display. This means that the oven lock has been set After the automatic shut off, turn the oven off completely. After that, you can turn it on again.
- Turn the oven on and open the menu, which displays the choice of heating modes.
- Press the text field “cleaning”.
- Select the “Pyrolytic” function.
- Use the rotary knob to set the cleaning mode.
- Start pyrolytic cleaning of the oven with the “Start/Stop” button.
On the control panel find the lock button, usually indicated by a key symbol. Press this button and then select the option. lock control, press it for a few seconds. Then you should hear a beep, indicating that unlocking was successful.
To set the time, you need to: Press sensor 1 (MENU). The “Steaming pan” symbol must light up. After 7 seconds set the time using the sensors 2 and 3 (arrows pointing left to right). After the time setting is finished, the new data will be memorized.
How to : set cook alarm, cook delay start and Cook time on a Bosch Oven
“Light bulb”. switching on the light in the oven to visually control the cooking. “Snowflake” or “Snowflake with drops”. defrosting products. Horizontal line at the top of the icon, at the bottom or simultaneously in two parts of the square. respectively, heating by upper, lower heating element or both at once.
- Press the Stop/Reset key;
- To set the manual mode, select the “Start” button;
- Now adjust the readings with the Increase or Decrease keys. This will change the reading by 10 seconds up or down.
Red meat is cooked at 230-250° Celsius degrees Fahrenheit., and white at a fairly low 180 degrees. Beef and other red meat should preferably start cooking when its temperature is close to room temperature, salt it better in the middle of cooking. then the finished meat will be soft and juicy.
How to set the timer on a Bosch oven
Note! The text in this document was recognized automatically. To view the original page, you can use the Original mode.
Use the temperature controller to set the temperature or mode
Set the function selector switch to zero
You can use the knob to change the heating mode, temperature or grill mode at any time.
The oven heats to the desired temperature particularly quickly in the fast heating mode.
Use this mode if the oven is to be heated to a temperature above 100 °C. Best suited for
For optimal cooking results
Do not put the dish in the oven until it has finished heating up quickly.
Set heating mode and temperature.
C symbol lights up on the display. Oven begins to heat up.
A buzzer sounds. The C symbol on the display goes out.
You can now put the dish in the oven.
Press button C. The C symbol on the display goes out.
Your oven has different timing functions. Press the 0 button to call up the menu and switch between the various functions. All the time symbols on the display light up at this time. The brackets [ ] tell you which function you can currently change. You can change the parameters already set
of the function, using the and. buttons, when the corresponding symbol is enclosed in brackets.
You can use the timer as a normal household. It operates independently of the oven. The timer beeps
You can use the timer as a normal household beep to let you know that the set
the set cooking time or the time on the timer has expired.
Time symbols appear on the display, the symbol O
Button. suggested value = 10 minutes
Button., suggested value = 5 minutes
After a few seconds, the set time is accepted.
The timer starts. The [O] symbol lights up on the display and
The timer starts counting down. All other time symbols go out.
A buzzer sounds. 00:00 appears on the display. Turn off the timer with the 0 button.
With the. button, set the timer again to 00:00. After a few
seconds change will be accepted. Timer turns off.
If several time settings have been made, the display
The corresponding symbols light up. Setting symbol
of the time, the value of which is shown on the display,
To request a timer reading O, time
cooking time D, end time P or time of day 0, press the 0 button until the corresponding symbol is
is enclosed in brackets. Recalled value for a few seconds
You can set the cooking time in the oven. When the run time has elapsed, the oven
automatically turns off. This means that to turn it off
of the cabinet you do not need to interrupt another operation. Unwanted overcooking time will not occur.
Causes of unstable operation of the electric stove oven can be a variety of causes, and mostly they are reduced to either violations in the electrical wiring, usually insulation, or a breakdown of one of the components of the oven or the entire stove
- Press the button. The clock indication on the display flashes.
- Use the multi-function switch to set the hours.
- Press the button. the minutes indication will flash on the display.
- Use the multi-function switch to set the minutes.
- Press the button
How to set the timer on a Bosch oven
Your oven has different time functions. Button
different functions. At this time, the display will
all the time symbols will be illuminated. The brackets [ ] will prompt
you which function you can currently
change. You can change the settings of an already configured function using the buttons
You can use the timer as ordinary household. It’s
Operates independently of the oven. The timer emits a tone
A distinctive beeping sound, letting you know that the set
The cooking time or time on the timer has expired.
The time symbol appears on the display, the symbol
After a few seconds, the set time is accepted. The timer starts. On the display, the [
Timer countdown starts. All other icons
Timer time has expiredThe beep sounds. 00:00 appears on the display. Stop timer with key
Changing the timer timeChange the timer time with the
Reset the timer to 00:00. In a few seconds
seconds the change is accepted. Timer turns off.
Request time settingsIf several time settings have been made, the corresponding symbols on the display
If several time settings have been made, the corresponding symbols light up on the display. Tuning symbol
time, the value of which appears on the display,
enclosed in brackets.To request a timer reading
enclosed in brackets. Recalled value for several seconds
You can set the cooking time in the oven
cabinet. When the oven runtime expires
automatically turns off. This means that to switch off
You don’t have to interrupt any other work. Unwanted
Press and hold the “key” button until “CHILD PROTECTION ACTIVE” and the [Key] symbol appears on the display. This takes approx. 4 seconds. The oven will no longer turn on.
One of the most common causes of an oven malfunctioning. A heating element burned out: the upper or lower heating element. It can be checked visually: when the oven is in good working order, the heating element must not have any dark spots, blisters, cracks or other mechanical damage; after turning it on, the heating element heats up to red.
The timer is a special device that allows you to time or program the cooking time. Depending on the setting, at the end of the programmed cooking time the oven may switch off heating automatically or just give an audible warning to the user.
The buzzer emits a buzzer when the oven is switched on.
- Press the button repeatedly. until the icon and three digits on the disc begin to flash.
- Turn the TIMER knob towards ” ” and “-“. The three digits on the TIMER knob toward ” “. ” to set the minutes.
- Press the button again