Do-it-yourself machine
Not every person, even if he takes his first steps in business in this way, can afford to spend even 100,000 rubles on it. In this case, you can search the ads for the sale of used sharpening used skate sharpeners without any particular fears that it will fail. After all, the only thing that can cause alarm is the serviceability of the electric motor. But it’s easy to check the engine. plug it in and make at least one load on the working tool. If at the same time the number of revolutions decreases slightly, and there is no smell of burnt winding from the engine, then there is nothing to fear. Another way out is to figure out in detail how to make a machine for sharpening skates with your own hands and get down to business.
The starting materials are brass or aluminum pipes of different diameters and a whetstone with a diameter of 25 mm. You will also need a bench vise and a hacksaw for metal with a drill. Pipes are needed with diameters: one is 25 mm, the other is smaller, but so that it fits right into it.
We take a pipe that fits tightly into the other, and cut it off with an angle grinder or a hand-held machine from one of its edges 10 mm. We make 2 such plugs.
- Taking a pipe of a larger diameter, cut a longitudinal groove in it and insert an abrasive stone with plugs on both sides into it.
- We drill the pipe in the transverse direction with a drill so that the drills go between the stone and the plugs, then we tighten the entire structure with screws that will prevent it from falling apart.
- We make adjustments to the structure using a file, setting sufficient removal, in which the stone will go beyond the plugs on the sides.
- We grind the plugs with a file, regularly taking measurements with a ruler.
- To securely fix the stone in the pipe, we strengthen it with super glue.
- On top of the parts we cover with a silicone plumbing compound.
Such a homemade skate sharpener allows you to manually process the skates by making repeated sliding movements of the blade over the stone. But its performance is low and it can only give the blade a rectangular shape.
A better option would be a device that contains an electric motor with a flange for attaching an abrasive wheel. But we must not forget about safety precautions. The circle on the outer diameter must be protected from dangerous scatter of its fragments in case of sudden destruction. You will also need a rig, firmly connected to the engine body, which will allow you to set a fixed position of the skate blade relative to the circle.
Basic skate sharpening tutorial.
How to sharpen products with a groove
To sharpen products with a groove, you should stock up on:
If the products are just purchased, you need to form a groove with emery, or to arrange it deeper, in the case of a strong dullness of the blades. To remove the gutter, a file is used, the diameter of which will be 10 mm. It is important to keep track of the depth of the gutter, which should be up to a maximum of 0.6 mm. Do not allow the groove to roll to the sides. To avoid trouble, a flat surface is applied to the product. It is attached perpendicular to the position of the blade. A fine-grained bar is used to remove burrs.
Hockey skate sharpening blade types and profiling
Sharpening machines are universal in terms of their application. They are used to sharpen not only knives, axes, but even skates. Their general purpose is to sharpen various products with their own hands. There are several types of such machines, each of which has its own characteristics and properties. Sharpening machines differ in their specialization.
partners
launched a fiber optic laser cutter for metal XTC-1530W / 1500 RAYCUS in St. Petersburg In Ryazan, launched a fiber optic laser for cutting sheet metal LF3015LN / 1000 Raycus Death Star made of wood. For those who are in the subject Try to guess what values this safe keeps! You can look at this CNC pipe bending machine forever.Children’s workbench with DIY tools! Drawings are included! What if you need to drill a hole and the drill diameter is smaller than you need? Pictures for adult welders Rocking chair for a child in the form of a speeder from star wars with their own hands!
How to properly handle skates if they have a groove?
Here you will have to work a little. over, the sharpening accuracy must be very high, otherwise you can simply damage the blades. To work, you need sandpaper and a round file. Before you sharpen your skates at home with these tools, inspect them. If you need to deepen or make a groove, use sandpaper.
Next, a file comes into operation, the diameter of which should be no more than 10 mm. Using this tool, try to correctly deduce the shape of the gutter. At the same time, you will process the edges. Please note that the groove depth should not exceed 0.6 mm. Regarding the sharpening of the blade edges, the correctness of the procedure should be checked periodically. To do this, place your skates on a very flat surface. If the work is done accurately, then the blades will be strictly perpendicular.
Last of all, a fine-grained bar should be walked over the metal, which should finally eliminate all burrs and other defects from the surface. So you know how to sharpen skates using simple tools. Now you need to understand how to perform this procedure using special equipment.
Types and their features
Example equipment, laser skate sharpening machines “Prosharp”. The small device is shaped like a suitcase, weighing only 15 kg. This technique is multifunctional for 5 work cycles. Allows centering of hockey and figure skating equipment blades.
Steel bed device with useful features:
- swivel turning in automatic mode,
- single and double profiling blades,
- circle pressure switch in operation.
The set of the “procharp” machine includes templates, diamond discs and pencils, laser PPD for profiling the Z-type groove, necessary to increase the adhesion of the blades to the ice surface.
Simple design reliable machine “SZK-1” popular, used in sports schools for sharpening sports equipment. A groove is made on it along the axis of the blade. The cost-effective solution to blade sharpening problems.
Since the device holder is universal, it is used for different types of ammunition, the blade is fixed with a screw clamp. The equipment has many features:
- high power induction motor,
- you can even sharpen goalkeeper skates,
- easy turning process with high precision.
To gain skills, it is better to start not with your favorite skates, but with sharpening the blades of the carpentry tools of a plane, or jointer. Having mastered the process, you can become a specialist in this field.
Another type of machine is professional, with a reference plane. Skate sharpening machines “SZK2” is a supplemented version of the previous model. It features a new blade attachment system, where it stands on a holder that moves along the ground surface parallel to the plane of the grinding disc. In this case, it is guaranteed that no displacement occurs. The accuracy of this device is higher, and you can work on it without having the skills. The advantage of SZK2 is that the processes can be automated. Minimum material costs, maximum speed and reliability.
SZK3 is the next generation of skate sharpening equipment. The movement of the carriage, on which the blade is fixed in the clamp, occurs automatically. The operator himself sets the speed and the required number of cycles. Everything is arranged so that some of the operations are carried out automatically.
Such characteristics of machine tools with a movable carriage have fundamental advantages. The main qualities are accuracy, reliability, as well as:
- Reinforced guides increase equipment life.
- Self-centering of the clamp avoids machine readjustments. The work does not require circuits. Repair parameters are set by the operator.
- Clamps, if necessary, possibly replace, without major expenditures.
- A shock absorber on the grinding wheel arm minimizes vibration, increasing quality.
- The electrical circuit is resistant to power surges.
Description
Granpa Rasl Andreev Added: at 20:13 Duration: 03:47
The machine that I made myself is ready for use.
Hockey
Professional hockey players prefer not to sharpen their skates on their own, but to use the services of qualified masters. They sharpen on automatic machines that allow you to grind metal evenly on both sides of the cutting edge (Figure 3).
It is imperative to keep the sharpening symmetrical. Otherwise, the athlete will lose stability on ice.
When preparing your hockey equipment, it is extremely important to choose the correct sharpening method. The advantage is given to the Channel Z method.This option will eliminate accidental slippage when making sharp movements.
The main feature of hockey skates is the very thin and sharp edge
Experts recommend not to immediately start turning hockey skates, but first practice on an old pair of equipment.
Curly
The main rule for sharpening figure skates is that the same amount of metal is removed from different sides of the cutting edge. Otherwise, the balance of stability on ice will be disturbed (Figure 2).
The easiest way to carry out this manipulation is on a special machine:
- The back of the boot is placed in the direction of the guide, and the blade is pressed at an angle.
- Then the skate is slowly rotated, gradually directing it down.
- It is imperative not to use too much force, and not to press the blade too hard against the machine, so as not to accidentally damage the edge.
Figure skates are sharpened especially carefully to maintain balance
The machine should be used carefully, wearing goggles, clothing and gloves. The skate is held as tightly as possible so that it does not fly out and does not change position when sharpening.
It is also important to keep an eye on the direction of travel of the grinding wheel. It must move away from the user so that sparks do not fly through the eyes. At the end of sharpening, the blade is additionally processed with an abrasive stone for final surface grinding.
Why do you need to sharpen skates?
Beginners sometimes think that sharpening skates is not necessary at all, because their undercarriage is made of durable material. This is true, but over time, the skates begin to dull and lose performance (Figure 1).
Regular sharpening is needed for several reasons:
- It improves the quality of gliding on ice.
- Skating sharpened skates makes it much easier to accelerate and keep your balance.
- In the process of skating, the accuracy of performing individual elements of skating increases, and it is much easier for an athlete to keep balance.
Sharpening skates is easy at home
If the skates are poorly sharpened, the legs will begin to move in different directions, and it will be more difficult for the athlete to control movements.
What sharpened skates look like?
Skates that are properly sharpened have a groove inside. Lateral ribs are of equal thickness and sharpness. The blade should be very sharp, like a knife (picture 4).
It should also be borne in mind that immediately after purchase, the skates have no sharpening at all, and the side edges are not sharp enough, so they must be sharpened. To do this, use a grinding wheel with an increased diameter.
Sharpened skates should be evenly sharp and with a thin edge
Goalkeeper
The main feature of goalkeeper skates is in the presence of additional protection and a modified form. This is due to the fact that such sports equipment very often collides with the puck.
Despite the fact that goalkeeper skates are slightly different from other types of equipment, their sharpening is no different from ordinary.
How to sharpen skates at home?
Before you start turning the cutting edge, you need to properly prepare the inventory. It is imperative to maintain the original cutting edge configuration for the skates to maintain their performance.
In addition, when sharpening, the features of the inventory are taken into account, the tool and the workplace are prepared in advance. Further actions depend on the type of skate.
How to sharpen skates
Winter is a great time for outdoor activities and many people prefer to spend time outdoors, skating or skiing. To enjoy sports, you need to keep your sports equipment in order. One of the important procedures is the regular sharpening of skates.
This can be done at home if you use the correct step-by-step instructions. The corresponding recommendations are given in the article, following which you can sharpen figure, goalkeeper and hockey skates with your own hands.
The main mistakes when sharpening
Regardless of the sharpening method and the type of inventory, beginners may have some difficulties (Figure 5).
In this case, do not allow the blade of the skates to be too sharp, as this can cause injury. Leaving the blade flat is also wrong. Such sharpening is extremely rare and only for those who are engaged in extreme sports.
When sharpening skates, it is important to remove the metal evenly
Other common mistakes are:
- asymmetry of sharpening of the inner and outer sides of the blade;
- focusing on certain areas: do not remove too much steel from the nose or heel;
- different rib heights or incorrectly selected groove profile.
If a beginner has concerns about the correctness of sharpening, it is better to entrust the sharpening to a professional master for the first time. In the future, you can maintain the sharpness of the blade at home.
information on how to sharpen skates properly at home can be found in the video.
Do-it-yourself machine
Not every person, even if he takes his first steps in business in this way, can afford to spend even 100,000 rubles on it. In this case, you can search the ads for the sale of used sharpening used skate sharpeners without any particular fears that it will fail. After all, the only thing that can cause alarm is the serviceability of the electric motor. But it’s easy to check the engine. plug it in and make at least one load on the working tool. If at the same time the number of revolutions decreases slightly, and there is no smell of a burnt winding from the engine, then there is nothing to fear.
Another way out is to figure out in detail how to make a machine for sharpening skates with your own hands and get down to business.
The starting materials are brass or aluminum pipes of different diameters and a whetstone with a diameter of 25 mm. You will also need a bench vise and a hacksaw for metal with a drill. Pipes are needed with diameters: one is 25 mm, the other is smaller, but so that it fits right into it.
We take a pipe that fits tightly into the other, and cut it off with an angle grinder or a hand-held machine from one of its edges 10 mm. We make 2 such plugs.
- Taking a pipe of a larger diameter, cut a longitudinal groove in it and insert an abrasive stone with plugs on both sides into it.
- We drill the pipe in the transverse direction with a drill so that the drills go between the stone and the plugs, then we tighten the entire structure with screws that will prevent it from falling apart.
- We make adjustments to the structure using a file, setting sufficient removal, in which the stone will go beyond the plugs on the sides.
- We grind the plugs with a file, regularly taking measurements with a ruler.
- To securely fix the stone in the pipe, we strengthen it with super glue.
- On top of the parts we cover with a silicone plumbing compound.
Such a homemade skate sharpener allows you to manually process the skates by making repeated sliding movements of the blade over the stone. But its performance is low and it can only give the blade a rectangular shape.
A better option would be a device that contains an electric motor with a flange for attaching an abrasive wheel. But we must not forget about safety precautions. The circle on the outer diameter must be protected from dangerous scatter of its fragments in case of sudden destruction. You will also need a rig, firmly connected to the engine body, which will allow you to set a fixed position of the skate blade relative to the circle.
Specificity
Skate sharpening has its own characteristics. Before the process, it is specified where exactly the athlete will play. on artificial or natural ice, weight category, riding style. When playing hockey, an important parameter is the place in the team of the striker, goalkeeper or defender.
The depth of the groove is adjustable depending on the use of the inventory:
REAL hand held skate sharpener! But Does It Work ? Blade Barber Review
If there are burrs in the inventory, it is not necessary to sharpen.
How to sharpen a kitchen knife. 7 steps for beginners
Ice skating is one of the most popular sports. However, over time, ride comfort can be significantly reduced. This is due to the loss of the original shape of the blade. The only way out is to sharpen it. If there is no desire (or opportunity) to contact a specialized service, you can do this work yourself.
So, in sharpening a knife, one goal is to abrade so much metal from the blade so that the cutting edge becomes sharp again. You need to start work with a coarse-grained abrasive and finish with a fine-grained.
It is important to remember the following principles of knife sharpening:
- The most important thing is to find the optimal sharpening angle and keep it on the entire cutting edge while sliding along the bar.
- Movements should be smooth, without pressure.
- All the bars must be moistened with water, or better with soapy water: before sharpening (so that the blade glides better and the metal dust does not clog the pores), in the process (to remove the resulting suspension) and at the end, to clean the bar.
And one more important advice. for the first times it is better to practice with a knife, which is not a pity to spoil. Especially if your main knife is too solid and expensive. Well, let’s get down to practice.
We rinse the stone with water, and then run it over it, say, with a sponge with a drop of dishwashing liquid.
Next, we sit down at the table and place the stone on a wooden board, for example, a chopping board. Can be placed under a stone and a towel. It is more convenient for someone to put the bar perpendicular to yourself, and for someone at an angle of about 45 degrees. Over time, you will understand how it is more convenient for you to work.
Now you need to decide on the sharpening angle and fix the position of the knife. What should be the angle? The general principle is that the smaller it is, the sharper the blade is, and the larger it is, the longer the blade remains sharp.
- Ordinary kitchen knives are sharpened at an angle of 40-45 degrees. If you are sharpening a fillet knife (designed for cutting thin pieces of fish, poultry and meat), then it should be sharpened sharper. at an angle of 30-40 degrees. The selected value must be divided by 2, and then we get the angle that should be between the blade and the surface of the bar. That is, to sharpen the blade at 45 degrees, you need to sharpen each side of it at 22.5 degrees to the sharpening surface.
- Remember, you must try to adhere to the chosen angle during all work.
We put the knife across the block so that the upper edge of the handle is above the lower edge of the stone. Holding the handle with one hand and the blade with the other, we begin to slide along the bar from ourselves along the trajectory shown in the picture below.
- The bottom line is that the cutting edge sliding over the stone is always perpendicular to the direction of travel.
- At the bend of the blade, the knife handle needs to be slightly raised in order to maintain the selected angle.
- Remember also that you cannot put pressure on the blade, but you should not give slack either.
Thus, it is necessary to hold the blade over the stone about 40-50 times, namely, until a “burr” (burr, micro-saw) appears along the entire length of the RK (cutting edge). Its appearance will tell you that the excess metal is worn out and there is no point in grinding further. Then you need to turn the blade over and repeat the same steps. Visually on
- A burr is a slight roughness that is difficult to see, but can be felt by gently running your finger along the edge of the blade (but not along the edge so as not to cut yourself).
During operation, a suspension will appear on the blade. metal dust, which must be periodically washed off with water.
So, the burrs have appeared, now we proceed to fine-tuning. To do this, repeat the same manipulations on a stone with half the grain size. An alternative way of fine-tuning is with the help of musat.
- Musat is a steel rod of oval or circular cross-section with longitudinal notches. It is only suitable for dressing and maintaining sharpness, but not for sharpening a knife. Musatom is recommended to edit the knife every time before and after work.
How to edit a kitchen knife with musat can be seen in the next video master class from the respected knife maker Gennady Prokopenkov, who, by the way, specializes in making kitchen knives.
If you wish, you can bring your knife to a razor sharp point. To do this, take any leather or leather belt, treat it with an abrasive paste GOI, Dialux or any other, and then do all the same steps, but only in the direction from the cutting edge.
Checking the work done
You can evaluate the correctness of sharpened blades as follows:
- Inspection. The edges of the blade should be symmetrical, without chips, chipping.
- With a small thin piece of plastic, we carry it with the same force on different parts of the blade and then examine the trail. With the formation of the same depth on all parts of the track, the skate is sharpened correctly and efficiently.
- When showing on the ice, skates must stand upright, without bending to the side. This speaks of good sharpening.
- The wearer should put on shoes, step onto the ice surface and check how the blade behaves during the jolts. If there is no slippage, the skates are ready to play.
Assembly instructions for the unit
Grinding machines at home are assembled according to the scheme:
- a pipe with a large diameter is clamped in a vice,
- a slot is made along it with a hacksaw having narrow blades,
- the required slot width is 3 mm, its structure is even,
- 2 fragments of 10 mm are sawn off from a pipe of a smaller size (2 plugs are obtained),
- 2 plugs together with a grinding stone are inserted into the inside of a large pipe,
- with a drill across a large pipe, a hole is drilled between the stone and the plug,
- the whole structure is tightened with a screw,
- a file adjusts the design of the device,
- the stone must extend beyond the plugs,
- the plugs are sanded with a file with mandatory measurements with a metal ruler,
- so that sharpening does not lead to crumbling of the stone, it is strengthened with superglue,
- the body of the resulting apparatus is covered with silicone for plumbing needs.
Hand sharpeners do not require a network connection, they are compact, it is not difficult to understand the principle of operation, and their cost is low. Models often have a manufacturer-specified sharpening angle, which also simplifies the process. Devices with several sharpening zones work out the cutting surface most carefully. The sharpening process is quick, but chances are the blade will dull again just as quickly. A good model can minimize this risk.
How to set the angle of a knife sharpener on a kitchen knife sharpener
For a kitchen knife, it is not necessary to set the sharpening angle on a mechanical type sharpener, because the manufacturers provided for this moment and concluded rotating wheels between the plates according to the required parameters. Such a device will not work to bring the sharpness of the cutting edge to perfection and at the same time maintain its wear resistance. mechanical sharpeners are not used for professional chef knives.
The sharpening angle is constant, which is optimal for frequent dressing of standard household knives made of medium hard steel.
How to sharpen skates at home: instructions with pictures and videos
The correct sharpening of skates is very important, especially for those who are professionally involved in winter sports. And for others it will be very interesting and informative, because you must agree that rolling on a well-sharpened blade is much more pleasant than “crawling” on worn ones. How to sharpen skates at home? Let’s deal with this issue together.
How to sharpen skates at home
If you think that this is a simple task, you are deeply mistaken. Usually, athletes only turn to professionals to do their job of balancing and sharpening the blades. After all, the slightest mistake in this. and write it was gone. The skater or skater will lose balance, the blade will overheat, and will not be able to hold on to the turn. As a result, painful injuries and falls. So, if you are going to play sports seriously, you only need a skilled master who knows a hundred different nuances and will do what you need. Well, if you like to ride like that, then there is nothing wrong with doing this procedure yourself. The main thing is desire, hands and tools.
So, in order to sharpen skates ourselves without special devices, we need:
- A vise that allows you to clamp the skates up with the blade. Without this, you will have a hard time and you will definitely not be able to get the expected result;
- A small thin round file, otherwise called a file, the diameter of which will be equal to the thickness of the ridge. We need it to make the groove of the blade even;
- And finally, it is necessary to make some device from a block of wood. To do this, we saw through a longitudinal hole, identical to the width of the blade of the skates and in depth to the height of the blade. To the very depth, the groove must be widened so that the file will enter there.
The process itself is not complicated, but it requires perseverance and attentiveness.
Scott “Scooter” Jess Shows The Proper Way To Sharpen Skates
- We grip the skate horizontally in a vice and put on a piece of the bar made by us with a file inside;
- With this device, you need to make a small and even groove right in the center of the blade. We drive back and forth with our piece of wood until you outline it;
- Next, you can start applying force and deepening;
- We continue to sharpen until we achieve a sharp edge.
As you can see from the photo, there are notches. This is not scary and it always happens, even if a special machine is used. Later they are removed.
How to sharpen skates correctly: is it available to everyone?
Many people who buy new skates make the same common mistake. They are sure that in this case, sharpening them is not necessary. A new product doesn’t mean it’s perfect for you, as the default blade contours that come from the factory are not for everyone. Better even to put it in another way: they will fit units.
Fortunately, no one bothers us to independently make from the blade profile what we need.
One of the questions that amateurs or beginners ask is why do you need to sharpen skates at all? There are several reasons for this:
- You have more enjoyment and confidence in ice riding;
- With a well-sharpened blade, the balance is better controlled;
- It is much easier to carry out accelerations and other maneuvers, for example, rotations;
- And, of course, sliding. It is better.
When buying skates, forget that leather skates supposedly have a better blade quality than other types. It is a myth.
Final sharpening of skates, finishing of the blade
Naturally, you shouldn’t quit your job halfway. The worst is over, it remains a little “polish” the result.
To do this, we need a regular file (thinner), which must be wrapped with sandpaper. By the way, the one that you used when making the groove is also suitable. Remove all notches, but be careful not to touch the edges.
That’s all. As they say, the devil is not so terrible as he is painted. Ride for health and have a double dose of pleasure. And if you want more clarity, take a look
When to sharpen skates?
It is not uncommon for brand new ice skating equipment to be sold unsharpened. it may not even have the necessary groove on it. It will either have to be taken to the workshop near the rink, or processed by yourself before the first use.
And, of course, sharpening is also regular maintenance of the blade, which is carried out as needed:
- before the new season;
- if rust appears on the blade;
- when there are deep scratches in the groove;
- when the groove is completely erased.
Not everyone knows this, but there are fairly simple ways to sharpen skates on your own. Why this might be a better option than asking a master?
Even amateurs already have their own preferences in skiing, so it is better for them to know which sharpening level is more comfortable to ride. So, for beginners, too sharp a blade is not recommended.
A sharpener usually focuses on his personal knowledge and standards for skate processing:
- for figure skating, a deep groove is used. 10-15 mm;
- for hockey. gutter only 0.5 mm.
And, of course, it is not so important for a workshop employee how carefully the process is going, whether the case itself is not scratched, how firmly and securely the blade is fixed. It is easier for the owner to take care of his equipment himself, as well as for ordinary shoes. you can notice critical wear in time.
Even not all professional athletes rely on sharpening specialists before training, with whom they work from year to year. Their trainers always check and correct the work of the grinders.
How to sharpen skates at home?
Athletes and amateurs who are seriously keen on ice skating often buy themselves sharpening machines for their home workshop. How convenient it is is a moot point. In addition to the high cost, it is important to take into account that such a device takes up space and requires certain control skills. At the same time, sharpening skates correctly at home using a grinding wheel is also not an easy task.
You should not be overly zealous with sharpening, just starting to ride. For beginners, use a medium sharp blade for easier handling.
The first option, more reliable, is a grinding wheel. In addition to this, you will need emery and a guide plate. This method is suitable for sharpening very blunt skates. Correct groove shape is corrected with a round file.
The grinding wheel will work well to sharpen the edges of the blade, but it is important to make sure that the groove does not “move” to one side and burrs do not appear. With the latter, nevertheless, a neat grinding with a bar will help to cope, and you can bring the chute back into an even arc with a file or sandpaper.
You can do without the circle. It is worth trying to sharpen skates at home at home using a round file, a vice and a wooden block:
- The ridge with the blade upward must be clamped in a vice (so as not to damage the body, it can be wrapped with a film).
- The file is inserted into a recess cut in a wooden block. it should correspond to the width of the sharp part of the blade.
- Then, with this improvised machine, a groove is cut along which a further sharpening of the ridge takes place to the very edge.
- Sharpening is done with a round file or a file wrapped in sandpaper, it also removes scratches.
On ice like clockwork: we will tell you how to perfectly sharpen skates at home
Sharpening the blade until you need sharpness every season, if not more often, is part of routine ice skating maintenance. Someone prefers to just give them to the workshop, without even imagining how to sharpen skates at home, while someone finds it easier to monitor the condition of their sports equipment themselves.
It is quite possible to put the blade in order on your own, but this will require some tools.
Care of sharpened skates
Sports equipment must be protected, despite the fact that it is designed for high loads. All tests to which it is subjected should not go beyond its intended purpose. Having spent the effort to sharpen skates at home, you need to properly care for the blade in the future.
- leave equipment wet, dirty;
- skating on stones, concrete, tiles;
- put plastic and other covers on wet blades;
- clean skates with rough materials or detergents.
Skates should be stored in covers with special protection on the blades. They need to be transported in the same form. This will keep the blades sharp for a longer time, but still, before each new season, the sharpening will have to be updated.
Sharpening skates on your own at home is not as difficult as you might think, but it will still take some tooling skills. But this is how you will most likely be able to sharpen the blade “for yourself” and ride with pleasure and comfort. Taking care of the equipment yourself, you begin to treat it differently. more carefully and responsibly. Well-watched skates will last for a very long time and possibly for more than one generation.