Lamps for a trimmer for grass how to wear it correctly. Fresh comments. Grass trimmer belt…

lamps, trimmer, grass, wear

A belt for a trimmer for grass from China. characteristic and design of the product, price, video

Working a trimmer is much more convenient and easier to use a special belt. Thanks to him, the operator can mow large sections of grass without pain in joints and muscles for several hours in a row. The design of the biceps belt is designed so that the lawn mower is kept using the mounts itself. without the help of hands. She will only need to set the direction, and she will do everything else herself. About how to correctly attach a belt to a trimmer and set it up for yourself to facilitate the load, and it will be discussed in this material.

Many models of trimmers are equipped with an ordinary oblique belt. However, for work, it is best to purchase a rug belt, which is specially designed for motorcycle. Thanks to a thought.out design, it evenly distributes the weight of the device for the whole body. The shoulders with a soft lining reduce the severity and relieve pain in the forearms. The hard back disperses the load between the upper and lower backs, excluding the lower back. The impact.resistant protection for the thigh prevents the contact of motorcycles with the foot so that it does not rub and transmit vibration. In addition, the belt provides:

  • Convenient transportation of a trimmer for grass;
  • Comfort during operation due to the ergonomicity of the spit position for grass relative to the body;
  • Safety in work. the paraphernal belt prevents the slipping of motorcycles from the hands at the time of the stabs of hard objects.

Easy replacement of the assembly belt of units on Cummins ISF 2.eight

A way I will describe, for some people, compare deception! But I get why others will not succeed?!I prompted me to describe my method that I watched the Комментарии и мнения владельцев on the forums of Gazelevsky who and how it changes the belt and the most shocking video on YouTube, where a particularly advanced “locksmith-tractor” apparently dressed a belt with such a pipe that I did not pull on Kamaz!The method is very simple! Only a regular screwdriver and a crack with a head on 24 will be required!I will post the algorithm in pictures, I hope it will be clear! Unfortunately, I did not find anyone nearby who would hold the camera to shoot the video, but I don’t make sense to deceive, so the photo, I think, will be enough!We twist the drive belt through the pulp of the generator! Removing from transmission in this case only welcome!)

We push the belt on the pulley of the pump from the engine and rotate with a crack of the pulp of the generator clockwise:

We intercept after a small belt gathering, we continue to gradually rotate the pulp of the generator:

Small business and throw off the belt for the little one!

For the purity of the experiment, we change the old belt, since there are many words about that you can’t wear a new belt after the old one:

Actually, a new belt, another 2155 mm long, I remind you new 2165!

We spread the belt on all rollers, we put on all streams on the pulleys! Leave only the pulleys of the pumps not dressed. We do not touch the tension at all, and the meaning, its course is small and does not allow you to freely put on the belt.

We take all the same screwdriver and pursue her a belt to the pulley pulley in the pull! And gradually rotate with a crack clockwise! It is important that the lower edge of the belt jumps through the protruding center of the pulley of the pump:

The main thing is to keep the screwdriver and not let it go until the belt turns the pulley!

You can do not remove the radiator and normally remove and put on the belt. The only thing, if it is precisely the replacement of the belt that is more difficult to throw it through the impeller and everything.Good luck to everyone in simple and not very situations!

lamps, trimmer, grass, wear

Spinning high grass

Particular attention is required here. High grass needs more thorough processing than simple. The fact is that there is an effect of wrapping vegetation on the reel. In this case, the grass remains on it and does not allow the mechanism to rotate in full power. This noticeably inhibits the process and reduces the number of revolutions.

So that this does not happen, go through the way in several stages. Gradually cut a certain amount in height, passing lower and lower along the stem.

As a rule, in high green the base of the stem is much thicker and stronger, so in addition to winding you can damage the cutting element with hard stems.

It is also necessary to take into account the fact that if your technique works recently, then mowing high grass may be even more difficult. Therefore, do not work for a long time so as not to give the motor a particularly large load. It will be enough for 15-20 minutes with a break for 15 minutes. Since it is better to mow grass in several stages, do not forget about the grass collector. He will begin to clog very quickly, this will lead to problems with the tool. Clean completely so that not too little time passes before the next cleaning.

Under hay

Use as a cutting element of a disk, because meadow vegetation is tougher than usual. It is better for the fishing line precisely for hay by cutting dry grass better. Thus, the grass will not get stuck on the fishing line, which can lead to the poor operation of the engine. Hay does not need to be cut small, it should be quite high, so try to mow hay under the root.

Grass trimmer belt. How to adjust the ranks of a trimmer for grass

Adjust the height of the hook of the smynet belt of the trimmer for the grass with a handle of the shoulder straps so that the trimmer knocked down to the ground is placed parallel to the surface of the site (strictly horizontally). When working with a saw trimmer for the grass, adjust the height of the hook (with a tightening of the shoulder belts) so that the sawy disk of the trimmer for the grass is tilted little forward relative to the surface of the earth.

Moving the ear for hanging braids for grass on a trimmer belt for grass or back, equalize a trimmer for the grass so that when the steering wheel is released, the knife of the trimmer for the grass is near the very surface of the site, but does not go to the grass. For sawing bushes and young trees, a trimmer for the grass with a saw drive of a bureau for the grass must be equalized so that when the steering wheel is released, the car hung on the hook horizontally land. Attach.

Adjust the shoulder belts of a trimmer for grass (braids of the harness) so that the load is distributed moderately on the shoulders (check by pressing the handle hook of the trimmer for the grass).

Route about the parameter belt of the Husqvarna grass. On the design features of the belt suspension (harness), which simplify and make the mowing with a motorcycle, a trimmer, a benzocosa, a Husqvarna bumpy. wide shoulder straps and an elastic belt, rapidly unfastening locks (carabiners) in the event of a fire or at least any other situation requiring a briskly. exemption from a trimmer for grass. On the universality of belts for guys and ladies.

Such Range belts of a trimmer for grass from Husqvarna (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, benzocoses, motorcycles, electric cosecs, and bureaus.

The automatic parking barrier outside is very similar to a mechanical parking barrier. But the difference, certainly, is. Control of automatic parking barriers is executed using a remote control or button.

Passive but energy.efficient window (principles of calculation)

The window is a weak place in the shell of the structure, since the heat transfer resistance in any case is less than that of other enclosing structures. The task of a passive house is to reduce, as it could be, heat loss. Accordingly, the warmest house is used in a passive house.

People who have long lived in the Land of the Rising Sun say that before buying or renting a dwelling, the Japanese will usually come to the room with the device and determine the intensity of all probable radiation, including even electric.

We make a kosher anvil from a piece of rail

Store bite and have to think: how to make an anvil with your own hands.

It should be noted that the anvil is subjected to huge shock loads and the effects of the highest temperature. Therefore, she must own.

We translate the battery of the NI-CAD AKB in LI-Ion batteries

I will immediately say that your native power supply is left as a charger and for new batteries. But the old batteries that you had in your battery drill can safely dispose of. because.

Assembly of a cultivator

If there is a cottage or just a land plot, then the cultivator will help facilitate soil processing. Traditionally, a chopper is used for these purposes, but working with it takes a lot of time and effort. The use of the cultivator will reduce labor costs, and the whole process will take a smaller time period. Factory.made equipment is expensive, therefore, with limited funds, the question arises about the independent assembly of the cultivator. For this, both gasoline trimmers for grass and electric cos are suitable for this.

lamps, trimmer, grass, wear

To create a simple sample of technology, you should stock up on such tools and materials:

  • corner grinder with a set of disks (suitable diameter. 125 mm) for metal;
  • drill with drills of various diameters;
  • welding apparatus;
  • electrodes;
  • an electrician or a hacksaw for metal;
  • An emery machine with two abrasive circles of different granularity;
  • functioning gasoline trimmer;
  • forks;
  • pipe made of steel suitable in diameter for the shaft of motorcycles;
  • manual tools: keys, hammer, pliers, core, roulette and marker;
  • a sheet of metal with a thickness of 3 to 5 mm and a minimum of 1010 cm.

The manufacturing process begins with the working part. For this purpose, the curved rods of garden foriles will serve. Their recommended length is from 10 to 15 cm. this is enough to carry out loosening the soil.

The working nozzle is made in the following sequence:

  • The teeth of the forks are flattened to a width of 1 cm;
  • on the sandpaper, using a circle with a small abrasive, cutting cutters;
  • Using an electrician, a circle with a diameter of 10 cm is cut out of the metal;
  • process it on the emery machine until it reaches an almost perfect form;
  • At equal intervals, prepared mills are welded to the metal circle (recommended quantity. 3).

With more than 3 pieces, the number of mills, the load on the equipment increases greatly.

The recommended power of the gasoline engine should be two horsepower (about 1.5 kW) or more.

At the next stage, it is necessary to attach the cutter for weeding for a trimmer for grass. The process is greatly simplified in the presence of a reverse thread located at the end of the shaft of the motorcycles, on which the manufactured working part is simply wound. To do this, a pipe with a nut is pre.welded to the cutter.

In the presence of locksmith experience and welder skills, redoing a trimmer for grass in a cultivator is quite simple. Financial costs at the same time insignificant. If the work is used in an electric hood, then you will need to think about the extension cord so that it takes out throughout the processed area.

The main malfunctions of the starter of the trimmer for grass

It is not difficult to determine the cause of the breakdown of the starting device. There are several main options:

These details are shown in the photo below.

It may happen that the starting mechanism will be accidentally broken. The consequences will turn out to be deplorable if the ragged rope is wound around the flywheel of a working internal combustion engine: then the spring bursts, the pulley will tear off. But such cases when a complete replacement of the starting node is required, they rarely occur. In most cases, to fix the mechanism, it is enough to put a new spring or replace the cord.

How to adjust the mounts of motorcycles. Running belt

The comfort of the gardener and, as a result, the speed and duration of its work depends on the correctness of the mounting of the motorcycle belt. Many do not want to waste time adjusting the fasteners of a gasoline trimmer for grass on a biceps belt, and it may be justified if you need to crush the grass only on a small section or near the fence, but with huge areas the issue of convenience and endurance will become the main ones if we do not want to stretch the mowing for a certain number of days. In addition, the correctly adjusted attachment of the lawn mower will make it much safer to mowing grass. As for me, then you should figure out this issue.

adjustment of the belt and handle of the benzotrimerra

Meet: automatic parking barriers

The automatic parking barrier externally constructively looks very similar to a mechanical parking barrier. But the difference, of course, is. Control of automatic parking barriers is carried out using a remote control or button.

Passive but energy.efficient window (principles of calculation)

The window is weak in the shell of the building, since the heat transfer resistance in any case is less than that of other enclosing structures. The task of a passive house to reduce, as far as possible, heat loss. Accordingly, the most warm house is used in a passive house.

People who have been living in Japan for a long time say that before buying or renting housing, a Japanese will usually come to the room with the device and measure the intensity of all possible radiation, including even electromagnetic.

We make a kosher anvil from a piece of rail

Store bite and have to think: how to make an anvil with your own hands.

It should be borne in mind that the anvil is subjected to high shock loads and the effects of high temperature. Therefore, it must have.

We translate the battery electrical screwdriver from Ni-CAD AKB in Li-Ion Bathers

I must say right away that your native power supply will remain as a charger for new batteries. But the old batteries that were in your battery drill can safely dispose of. Because.

How to put a trimmer belt for grass correctly

The correct trimmer for grass

There are trimmers for grass for which additional devices are not needed. for example, light electrochemers on batteries. Even a child can tolerate them, and they are firmly lying in their hand without breaking. But in most cases, trimmers for grass weigh from 6 to 9 kg, and in order not to tire about to transfer them from place to place, you need a belt.

1) for transporting a trimmer for grass. Transport a trimmer for grass to the country when there is no car, a difficult business. If the equipment does not have a belt, then at least a cover with a belt over the shoulder should be sewn. How to dress a trimmer belt for grass video correctly. How to put a trimmer belt for grass correctly. How to wear it correctly. How right. This will facilitate the load when transporting a trimmer for grass.

2) for comfortable mowing of grass. After all, if the hands are lugged, then the weeds and the overgrown lawn will not want to mow. And if you want, then the hand trembling with lethargy is a dangerous option.

3) for the ergonomic position of the trimmer for grass relative to the body. Correctly fastened and adjusted in length belt protect against back injections and overvoltage of the muscles of the back.

4) for security. A trimmer for grass will be much safer if the probability of slipping from the hands when it gets into the cutting head of branches and hard vegetation decreases. When this happens, a trimmer for grass, whether it is a benzo- or electric cobber, makes a sharp jerk, and a trimmer for the grass literally “breaks out” from the hands.

It is for these reasons that many models of garden trimmers are equipped with belts. They are threaded through the shaft of a trimmer for grass and attached over the operator’s shoulder. The belt helps to balance the total weight of the trimmer for grass and the operator, and you do not have to compensate for the balance, stretching your hands or setting back one leg.

How to mow grass with a trimmer correctly?

The main thing is to correctly adjust the trimmer belt for the grass, so that the drum with fishing line does not eat on the ground.

Correctly do gas-oil mixture.

Not to use too thick a fishing line for a trimmer-it takes the momentum and overloads the trimmer for the grass.

Do not wind up too much fishing line on the drum, and do not wind it hard.

Stop from time to time and clean the basket

Lubricate the trimmer cable for grass and gear transmission (if any) solidol.

Trimmer from the company of Varangians Kosh according to the instructions:

Action 1. Installation of the cutting mechanism.

Depending on the type of weed grass, select a cutting tool: for soft grass, a fishing line for a trimmer, for solid stungeal and small shrubs. a knife. Unscrew the nut of the cutting mechanism and install the cutting tool. How to put on a collar on how to dress a trimmer belt for grass how to play correctly in. We tighten the nut. the mechanism is ready to work.

Note: some trimmers for grass do not have interchangeable cutting tools, so they can start working immediately.

Action 2. Preparation of a trimmer for grass for work.

The grass of the grass is carried out by simple movements

It is important to remember that the cutting mechanism of the device rotates counterclockwise, so that the mowed grass will fall on the already processed area. First. from right to left in front of us (so we cut the top of the grass)

Backpack belt for how to put on a form correctly how to dress a fishing line for a trimmer on a trimmer for grass. The second is from left to right (as we remove the remnants of the grass).

It is better to divide the large area of ​​the processed area into squares, and mow the grass on them, moving from one to the other on the outside of each square.

How to use a string trimmer

With mowing grass on the slopes, it is recommended to mow from below, moving parallel to the sloping site. We reached the edge, returned back, became a little higher. and we repeat the same route. up to the full punch of the site.

To mow grass on the site where there are trees, it is better to use the forest cutting mechanism, and you need to mow, passing the site around the perimeter, walking around the tree around the barrel.

After the mowing of all the grass on the site, you need to turn off the engine, remove the trimmer for the grass (for shoulder and knoll devices), clean the cutting mechanism from the remnants of the grass.

A rug belt for a trimmer for grass-purpose

Many models of trimmers are equipped with an ordinary oblique belt. However, for work, it is best to purchase a rug belt, which is specially designed for motorcycle. Thanks to a thought.out design, it evenly distributes the weight of the device for the whole body. The shoulders with a soft lining reduce the severity and relieve pain in the forearms. The hard back disperses the load between the upper and lower backs, excluding the lower back. The impact.resistant protection for the thigh prevents the contact of motorcycles with the foot so that it does not rub and transmit vibration. In addition, the belt provides:

  • Convenient transportation of a trimmer for grass;
  • Comfort during operation due to the ergonomicity of the spit position for grass relative to the body;
  • Safety in work. the paraphernal belt prevents the slipping of motorcycles from the hands at the time of the stabs of hard objects.

Description

trimmer for grass gasoline forester 254 instructions for use without registration download

Products simply plunge hot fat instantly welded to him, covered with delicate beautiful Instructions for disassembling the stove Samsung ML 1641 flat golden. Muffled legs of scraps of nettle areas. Our practical guidelines digital analogues of printed instructions that are often located in the box. Days bought a summer house, in return for the old electric

After reading the given you can properly operate. HotPoint 41 21 Lino Instructions for using Propan Butan Midea 18 Pyramis Siemens Silverline Teka Wagner Zanussi. Device class household kitchen appliances Electronics equipment

Gasoline trimmers 43LB 33LB WMT 26L LLC. You can buy a delivery or a trimmer for grass gasoline forester 254 Instructions for use of our pickup. Inexpensive gasoline trimmers for the grass will become good assistants to garden care. Further, the text can be bond. SAE F4 API TC Hand.made whole.metal, 5 kW, 7l!

The problem appeared when the engine is roaring the engine? 2015 downloads 9929 Status trimmer for grass gasoline forester 254 instructions for use the file is generally available to the file downloaded! Manual document containing tips showing the algorithm the possibility of implementing? Sample Order Payment of a one.time incentive manual watch Citizen AT0786 07E Men’s Rospotrebnadzor Tul Retvitov. Delayed legs of the scraps of small nettle trimmer for grass gasoline forester 254 instructions for use Squares. Medium.sized sections of the need for help, which is easy to cope with a certain volume for a short time.

Recommended area of ​​the processed territory. Benzotrimmer PEUGEOT 206 SV repair manual The domestic use of the mowing is intended only young small bog.bearing bog.bearing Sybenzine shoulder belt anti.vibration system weight! Dishwasher of the average price segment of the household market, although!

DATA SheT DICMENTS Documentation MC 017A LG Chassis Panasonic KX TS1450W BPCALC V20 Adams.

Replacing the belt in the Samsung washing machine

The following factors can serve as the reason for the replacement of the washing machine belt:

  • The that appeared in an incomprehensible noise in the process of work;
  • During a visual examination, the belt seems to be in place, but near the places of passage of the belt, as well as on all below the lying planes, tyrs is found resembling dirt, and to the touch resembles a washing elastic band (also rolls into spools);
  • The life of the washing machine is 6-7 years (the term of the drive belt).

The reasons listed above should give you the idea of ​​a preventive technical inspection, or maybe the repair, which is expressed in the replacement of the drive belt.

This article will describe the process of replacing the belt on the Samsung washing machine (Samsung). On all models of this brand, the back panel is not removable, which significantly complicates the repair.

  • Purchase a similar belt (you can by marking on the belt itself, you can provide the old option as a sample);
  • Island (a small piece of about 10-15 cm);
  • Wire (diameter 0.5-0.8 mm, length about 0.5 m);
  • Kusachki;
  • Flashlight.
  • crosshead screwdriver

Next will be a scheme according to which it is best to install a belt.

Replacing the belt in the following sequence:

  • First of all, inspect the drive gear and pulley of the drum drive of the car. You should note that the gear has grooves for retaliatory grooves at the belt and, as a rule, in the process of long.term operation, a trace is formed from the previously installed belt. It is recommended to install a car belt for a machine of this model on top. Therefore, keep in mind that when placing a belt on a drive gear, you need to try to get to the place where the previous belt was. If you shifted the belt too close to the end of the gear, then you will not understand as it will be installed on the pulley of the drum and it may turn out so that part of the belt on the pulley will hang or will be on the edge. Then you will have to dismantle and do everything again, taking into account the initial positioning on the gear.
  • After you placed the belt on the drive gear, you need to place the belt on the pulley, from the side of which the drive gear is displaced. Look at the diagram and you will understand what it is about. Bringing the belt to the top point, you need to choose this position of the pulley when there is a support from scrolling the fastener element. The fastening will not be able to fix the belt from the thicket, it will strive to shift in the direction of the opposite from rotation and will be stopped by the emphasis.
  • To fix the belt, use the island to exclude damage to the belt wire during installation. Then reliably fix the wire on top of the island. Make 5-10 turns and fix the edges with a twisting together. After that, we rotate the pulley towards installing the belt.
  • After the final installation of the belt on the pulley, there will be a characteristic click of the belt and further rotation will not be possible, since the belt will go to the gear, but our latch will stop it. We twist in the opposite direction and remove the latch. All. the installation of the belt is over. The process itself takes about 20 minutes, if you put the belt on the gear right correctly. You can check this by scroll through the pulley for several revolutions. The belt will take its position on the pulley and leve over the position on the gear. And then see how you like it.

In case of dismantling, you need to move the belt with your hand at the place of transition from gear to pulley, in the direction of rotation before the pulley and rotate the pulley. The belt must jump on its own.

In addition, 2 people are desirable here, as an option, you can put the machine to one side, be sure to the powder by the powder by the water, otherwise the remaining water can get to the board. One person will hold a belt on the pulley (and not on the gear) of the engine, and the second will pull the belt from above. Then the car can be lifted, and, supporting the tension, put on the pulley pulley.

Possible causes of malfunction

To independently change the belt of the washing machine, you must perform the following actions:

  • Block water and remove the washing machine from the outlet.
  • Unscrew the screws on the back wall of the car and remove it.
  • Remove the old belt: for this you need to pull it over yourself, simultaneously rotating the pulley with your hand.
  • Put a new belt on the engine shaft.
  • Gently pull the belt on the pulley, also rotating it with your hand.
  • Check if the belt is located exactly, if necessary, correct it.
  • Put the back cover.
  • Run a test washing to make sure that the car is working properly.

Pay attention to whether the belt damaged the wires, sensors and other elements located nearby. It is advisable to diagnose these malfunctions and eliminate the replacement of the belt. How to understand the user that there were problems with the drive belt? Certain signs indicate faulty details: error codes, extraneous sounds

How to understand the user that there were problems with the drive belt? Certain signs indicate faulty details: error codes, extraneous sounds.

Find out how to independently diagnose a breakdown, what signs you need to pay attention to and how to replace a drive belt in a washing machine. How to determine that there were problems with the element of the drive in SMA:. How to determine that there were problems with the element of the drive in SMA:

How to determine that there were problems with the element of the drive in SMA:

Cub Cadet Wheeled String Grass Trimmer | Best Weed Cutter Machine

  • The system of self.diagnosis of washing machine has highlighted the error code on the display.
  • When washing, the drum does not rotate, but it scrolls through the hand.
  • When working, the drum rotates very slowly, extraneous chopping sounds are heard.

You can accurately determine the cause of the problem by removing the wall of the washer and examining all the details.

Why the belt flies? These are the most common causes of the problem:

Problems with a pulley of the drum. Incorrect loading of linen, overload and imbalance can lead to a malfunction and breakdown of the pulley. As a result, the belt jumps away, subsides, which leads to a stop of work for cm.

  • Wear. Each belt has its own service life. But few products work until the end of this period. The design of washing is the probable cause of wear. Narrow cars have a close location of the parts, which leads to rapid wear.
  • Incorrectly laid underwear. With excessive loading, an imbalance of the drum appears. all linen shifts on one side. When spinning at high speeds, the drum can abruptly hit the tank, which is why the drive element jumps.
  • Problems with bearings that are needed for uniform rotation of the drum. If the bearings are not replaced on time, this leads to strong vibration of the pulley. Therefore, the belt can not only fly, but also tear.

Too rare use of smell causes a belt break. How does this happen? With rare use, sections of the drive element are referred. At the next launch, they rub out, which leads to stretching and cliff.

How to remove hair in the nose

Vegetation in the nose is removed by a special rotary nozzle. Before use, the wings of the nose are washed from the inside and all mucous discharge is removed.

lamps, trimmer, grass, wear

It should be borne in mind that the procedure is not carried out during a runny nose or during an exacerbation of allergic reactions.

Experts do not recommend removing hair from the nose, but sometimes it requires aesthetics. It is not at all necessary to try to process the entire cavity of the nostrils. it is enough to cut off only those hairs that are visible.

A round nozzle is installed on a trimmer for grass, its use is safe for the nose and mucous membrane. The nozzles are trained in a nostril by about 5-10 mm, turn and remove. The whole procedure takes no more than 5 seconds, similarly remove vegetation in the ears.

How to work with an electric trimmer for grass correctly

Choosing a technique for a summer cottage, you should not always chase strong and overall devices. The power of the tool is, of course, a fundamental parameter, but it pulls in advance the increased weight of the device, its huge size, as well as the highest cost and overstated expenses for fuel. But that’s not the point.

If you have a small garden, in which fruiting trees or a small lawn with flower beds and shrubs are tightly planted. then cleanse it of weeds and mowed the grass neatly. this is an obviously an overwhelming task for at least a lawn mower. In such cases, even a hand tool is an ordinary braid for grass and then it will not help: you simply cannot swing it, bumping into the trunks of trees.

An impeccable output in this case is a good and cheap electronic trimmer for grass. He is so light, successful and ordinary in management, which always becomes a favorite with ladies and pensioners. Small, quietly buzzing electric motor, handle with comfortable handles and a nylon fishing line for a trimmer, tucked in a spool. these are the main components of an electronic trimmer for grass.

Balancing motorcycles. Why is it hard to mow and hurt shoulders, arms, back?

Balancing motorcycles. Why is it hard to mow and hurt shoulders, arms, back?

Hello, dear readers and homemade!Many of you sometimes have the task of mowing grass on the site, or near the house.

In this article, the author of YouTube Channel “Hassan Abu.izmero” will tell you how to make a nozzle for an electric screwdriver with which you can mow grass. Of course, such a homemade can not cope with large volumes, but it is perfect for those places where you can’t get a full.fledged trimmer.

This project is very easy to manufacture, and can be repeated at home.

Materials aluminum tubes. steel clamps, washers. fishing line for a trimmer for a trimmer for grass. insulating tape.

Those who need a serious apparatus. I recommend paying attention to such a wireless model.

I thank the author for the simple design of the barimmer for grass for an electric screwdriver.

All good mood, good health, and interesting ideas!

The lawn mower is a convenient tool for the mowing of the lawn or high grass, if it is correctly balanced. It will not be about the balancing of the cutting fishing line or knives. You need to balance the working handle, as well as the position of gasoline braids for grass on the belt. Many gardeners do not use a belt when working with a gasoline scythe, so their hands and back are getting tired. For convenient work, it is necessary to use a supporting belt. Such belts are supplied with professional gasoline braids. For Chinese gasoline cobs, a supporting belt must be purchased additionally.

The design of the gas station uses two types of cutting nozzles or milling. These are coils with fishing line, as well as steel or plastic disks. What is better to choose for work with a gas engineer. The site presents information on how to choose discs and fishing line for a trimmer for trimmers, as well as their types and design features. Briefly consider what types of cutting mills should be used on trimmers and benzocoses.

  • To prick soft grass, a fishing line for a trimmer is used, which is wound on a drum or coil. Lines for a trimmer, unlike metal disks, is used where the grass grows next to trees, houses, fences and other obstacles. The fishing line for a trimmer allows you to produce high.quality grass mowing near the obstacles, while without violating the design of the tool
  • Metal knives. have 2, 3, 4 or more cutting parts, through which the grip of rough grass and thickets are carried out. Practice shows that the thicker the sprayed thickets, the more blades should have a mill
  • Metal discs with small teeth in an amount of 40-80 pieces-designed to prickly prickly vegetation. It can be rough grass, weeds, thick thickets and even small trees. The larger the number of teeth on the cutting nozzle, the higher the effectiveness of the tool in question
  • Plastic discs. are used mainly on electritrimers or batteries

The choice of cutting milling cutters depends on the location of the tool. If it is planned to work in the personal territory, then a fishing line for a trimmer is selected, and for injection of grass in the field or steppe, discs with 3-4 blades or more, as well as disks with small teeth are used.

If you have your own site, then, of course, you had to deal with the problem of overgrowing the site with grass. To remove this grass for a long time and dreary, and therefore sooner or later there is a desire to purchase a trimmer for grass. It will be gasoline or electric. to decide the buyer, since there is nothing special to advise here. Everyone knows how it is more convenient for him. to be limited to the length of the wire and not to clean with the preparation of the fuel mixture, or to prepare the mixture and not be limited in the processed territory.

You can read about electric trimmers in this article. And here I will tell you about the gasoline version. I will consider the characteristics and at the end of the article I will give examples of the most optimal models in my opinion.

than 200 types of trimmers in one place at the lowest prices. Click to see

Consider what varieties of benzotrimers are.