Lawn mowed gasoline self -propelled Hunter What gasoline to fill.

What can and cannot be poured into a lawn mower and how to mix gasoline and oil

It is difficult to imagine a modern city without neatly trimmed lawns. Such beauty is blocked using gasoline lawn mowers, which are highly productivity, a high.quality result. The engine of such an unit is quite demanding in relation to the quality of fuel and lubrication.

The use of unsuitable gasoline or engine oil significantly reduces the resource of the device, can lead to serious breakdowns. It is important to observe the correct proportions when preparing a refueling mixture, strictly adhere to safety rules.

What gasoline is poured into the lawn mowers

The power unit of lawn mowers in its design is similar to the usual automobile motor, so the fuel system and ignition work according to the same principle. Gasoline through a carburetor or injector enters the cylinder, where it is mixed with air and is set on fire using a spark plug. The engine drives knives that directly cut the grass.

The quality and durability of the apparatus depends on the quality of lubrication, fuel.

Gasoline requirements

For lawnmands, ordinary car gasoline is used, which can be purchased at any gas station. For the motor to work in optimal mode with maximum return, gasoline of the brands of AI 92, 95, 98 is suitable.

Increased octane number reduces detonation.

Engines that were developed in the last century are used here, therefore, the use of modern fuel grades is not always justified. This is due to the fact that it takes more time to complete combustion.

On the other hand, the sulfur and resins are increased compared to the requirements of GOST 32513-2013.

The deposition of resins on the walls of the fuel system violates the proper formation of the air fuel mixture. Sulfur increases gasoline fuel combustion temperature. This leads to increased wear of the internal movable elements of the engine.

lawn, mowed, gasoline, self, propelled, fill

Most of the gas mowers use unhealthy gasoline of the AI-92 brand.

The manufacturer’s recommendations should be followed. In this case, the engine resource will be maximum.

The choice of oil and how to mix properly

Structurally, the gas mowing engine differs from the car power unit with air cooling, the number of cylinders. The closest will be the Mopeda motor. One cylinder is used here, air cooling. For a mower, motor oil for two.stroke or four.stroke engines is completely suitable.

In addition, the design features of the fuel system should be taken into account. For example, for power units with forced fuel injection, a more modern lubricant is needed to classify the API. In other words, engine oil or SL is suitable for injectors.

Motor oil can have a mineral, semi.synthetic and synthetic basis.

For newer engines, synthetics are suitable, for “old men” only mineral water will be the best option, since other types of lubrication can damage rubber seals and gaskets.

Viscosa-temperature properties here do not have a decisive value. This is due to the fact that the grass has to be mowed only in the warm season at moderate temperatures.

In the case of a two.stroke engine, an oil dispenser and a separate tank is absent, so gasoline here needs to be mixed with engine oil. Only a special two.stroke composition is suitable here. Fuel and lubrication in such circumstances does not burn out completely. This explains the overheated oil smell.

Despite this, in no case can I save on grease, because due to friction the moving elements of the engine will wear intensively.

Dimexide from soot in the engine is the real benefit and harm according to the reviews of 2021 of the deposit and the fog inside the engine extremely negatively affect its technical characteristics. Power is lost, fuel consumption increases. Throughout the entire life.

Mix the components of the fuel mixing mixture in certain proportions. For example:

  • Inside the liter tank you need to pour 980 ml of gasoline and 20 ml of engine oil.
  • You can cook 10 liters of solution separately. To do this, you need 9800 ml of fuel and 200 ml of lubrication.

It is important to strictly observe the proportions. If at least a little “overdo it” with an oil component, then soot will form on the walls of the combustion chamber.

In the case of a four.stroke engine, a separate oil tank, a dosage system is structurally provided. Here the lubricant is added automatically in the right proportions. The user only needs to control its level inside the tank and, if necessary, add to normal.

How to refuel correctly

In no case can you save on the quality of fuel and oil. Inappropriate gasoline will contribute to the engine clogging. For refueling it is better to use pure unhealthy gasoline. It is advisable not to shed it to the ground.

It is not recommended to fill the full tank, because when working, the engine heats up hard. This leads to intensive fuel evaporation, increasing pressure inside the gas tank.

Before refueling, it is important to determine the maximum permissible fuel level using the operating instructions.

It is necessary to pour gasoline only in a cold lawn mower. Before pouring, be sure to wipe the lid with a clean rag. It is important to ensure that any garbage does not get inside the fuel tank. It is for this that special watering rods, tips are used.

The culprits of the blue smoke. oil scrap rings or caps? Blue smoke clubs in a working car indicate the ingress of motor oil inside the combustion chamber. Under the influence of high temperatures, the lubricant burns, forming a carpet on the valves.

The best lawn mowers Huter

Many owners of personal plots and country houses dream that their lawn is an ideal lawn. However, this result can only be achieved by careful care of the grass that was sown. This includes regular lawn haircut. For an excellent result, a full.fledged wheelhouse must be used, which allows you to get grass of strictly fixed length. One of the most famous manufacturers of lawn mowers is Huter. Its assortment has devices for almost any needs. Do not get confused in the variety of models and choose the optimal one will help the rating of the best lawn mowers Huter.

Toro Recycler 22 in. Smart Stow. Undressing and Startup

The lawnmands of this company have established themselves as a fairly high.class and reliable equipment for a summer residence and garden. All products of this brand are provided with a guarantee, and service can be carried out in any of the numerous service centers.

The main task of Huter lawn mowers is to give a certain shape to the lawn and haircut of grass. Judging by users’ reviews, then, in addition, these devices can even cope with such tasks as cutting the traveled herb, hay harvesting and mowing weeds.

Typically, lawnmands are used to work in large areas, from 400 m2 to 1 km2, where the use of a trimmer for grass becomes not effective enough. The advantages of popular lawmakers of Huter include the following characteristics:

  • small mass and ease in management;
  • high wear resistance and long period of work;
  • adjustment of the handles in height;
  • the presence of self.propelled models;
  • the ability to adjust the height of the mowing;
  • A wide price range.

Huter GLM-6.0S

This model is an excellent lawn mower for a large site, up to 1000 m2. Powerful four.stroke engine for 6 liters.With. allows him to effectively cut the lawns for a long time. It is recommended to fill the gasoline of the AI-92 brand in order to significantly increase the service life. The presence of a special handle allows you to quickly change the height of the cut in the range from 25 to 75 mm. This self.propelled lawn mower is recommended for semi.professional use and to all owners of large household plots.

  • control is located on the handle;
  • large grass collector;
  • folding handle;
  • reliable and easy to maintain;
  • cut regulator for 7 provisions;
  • The cutting element is hidden under the case.

Huter ELM-1400

This is a good and inexpensive lawn mower for the house. It is equipped with an electric motor with a capacity of 1.4 kW and a 40.liter grass collector. It is easy to install it enough so as not to cause any inconvenience. This device provides protection against accidental turning on by blocking the start button after each shutdown. To start the engine, you must click on a special button.

It is recommended for caring for small areas, dimensions up to 400 m2 and for clearing garden paths.

  • governing bodies on the handle;
  • relatively small mass;
  • powerful engine;
  • justified value;
  • permissible noise level;
  • cut width 38 cm.

Huter GLM-5.0S

This powerful model is one of the best lawnmands in this review. Its main purpose is to work on the care of a lawn in a park or on a large lawn. One.cylinder four.stroke engine with 5 liters.C, equipped with an air cooling system, is able to work for several hours without a break. The main thing is to refuel it in time with gasoline. All control is focused on the handle, which, moreover, can be adjusted in height. The lawn mower is ideal for caring for large areas and semi.professional use.

  • self.propelled wheels;
  • A spacious grass collector for 50 liters;
  • ease of launch;
  • excellent assembly and components;
  • unpretentious in maintenance;
  • removable, folding and adjustable handle;
  • Adjustable height of the cut.

Huter GLM-4.0

This is the best model of the lawn mower to care for the lawn in the park or the lawn of a medium.sized household plot. For ease of use, all controls are located on the handle. A 60 liter grass collector allows you not to worry too much about the need to get rid of grass for a long time. The adjustment of the height of the cut consists of five positions, and changes using one lever.

  • For work, special knowledge or experience is not needed;
  • Corps made of sheet steel;
  • build quality;
  • permissible noise level;
  • economical fuel consumption;
  • Great grass collector.

Huter ELM-1000

This lawn mower is the most miniature in this review. Speasing width is 320 mm. It is great for haircuts of well-groomed lawns and lawns, but completely not adapted for mowing high grass due to insufficient engine power. The gas mower is controlled using a lever mechanism.

Huter ELM-1100

This lawn mower has a width of the mowing, similar to the previous model, but is equipped with a more powerful engine of 1.1 kW. This means that it is more hardy and is somewhat better cope with high grass. Also, the unit has an increased range of mowing height and equipped with a solid grass collector. Controls are made more conveniently compared to the previous model.

Which lawn mower is better to buy

The best lawn mowers from Huter are provided in several versions at once. Before you opt for a particular model, it is recommended to familiarize yourself with the parameters that must be taken into account when buying a lawn mower. First of all, it is necessary to choose between the electric and the gasoline apparatus. Each of them has its own advantages and disadvantages that play a significant role depending on the conditions of their use.

It is worth mentioning that electric models are also divided into two types: battery and working from the network. The advantage of the former is complete autonomy, without reference to the eclectic network. However, they are not adapted for long.term operation for several hours. All these nuances should be taken into account at the stage of choice. Their advantages include low noise, environmental friendliness and ease of caring for them. Of the shortcomings, it is worth noting the impossibility of their use during and immediately after the rain.

Gasoline lawnmands are characterized by significant autonomy and high power. Depending on the power of the engine, they are divided into professional and household. The former have a power of more than 5 kW, and the latter. up to 5 kW. Naturally, the working resource of professional ones is almost 2 times higher than household. The disadvantages include considerable weight, the need to regularly season with gasoline and the presence of exhaust gases.

In addition, it is recommended to pay attention to the general characteristics, which are of great importance in the process of working with the lawn mower. These include:

  • The width of the mowing strip. The larger the processed area, the more this parameter should be.
  • Wheel shape. If the lawn is replete with irregularities, it is better to take a model with wide wheels and on the bearing.
  • The possibility of adjusting the height of the grass mowing, as well as the minimum and its maximum values.
  • Engine power. The more powerful, the better. For household needs, gasoline models have enough up to 5 kW, and electric. from 800 watts to 2 kW.

Also, before buying a lawn mower, it is recommended to read the reviews of users who use it for some time. This will help to learn more about its positive and negative aspects of a particular model and understand whether it really is needed or not.

Huter GGT-1500TX

Warranty and Service Official Warranty in the Service Center

The Huter GGT-1500TX trimmer belongs to the class of gasoline trimmers, optimally designed to work on lawns and gardens. The GGT-1500TX model received a two-stroke engine that significantly expands the capabilities of the device, that is, for example, not tied a motorcycle to power sources, as is characteristic of trimmers with an electric drive. In this sense, the described model can also be used for the processing of large territories, since the main factors in this case will be: the presence of a sufficient amount of fuel and the optimal technical condition of the device. The power of the Huter GGT-1500TX is 1.5 kW, which, along with the features of the cutting tool (fishing line for trimmer/knife), attributes it to the semi-professional class of such devices. Therefore, the model can be used not only on dachas and suburban farms, but also in small farms. The GGT-1500TX will perfectly cope with both the mowing of the grass and the putting in order of plots with a small shrub. The weight of the trimmer for grass is 6.78 kg, which makes the issue of transportation relatively simple, including in a regular passenger car.

Advantages of Huter GGT-1500TX

  • The presence of a gasoline two.stroke engine makes the device more autonomous compared to electric types of motorcycle.
  • The engine is characterized by sufficiently to solve problems with power and high reliability. It is also equipped with an anti.vibration system and is easily launched into operation.
  • In the design of the trimmer for the grass, a translucent fuel tank is provided, which is convenient to fill with fuel and monitor its level.
  • A convenient and reliable trimmer control system is provided, located on the ergonomic handle.
  • The 1500TX bar has a detachable mechanism for light and convenient transportation.
  • The trimmer for the grass is easily disassembled and assembled, but at the same time in the collected state is characterized by the reliability of all nodes and fasteners.
  • The model of the model receives a convenient paramedic type, glasses to protect the eyes during operation and a 40 TR dispery.

Work conveniently and safely

Of course, the operator must follow all the recommendations and safety requirements, comply with the rules of operation of a trimmer for grass. However, in addition, the manufacturer took a number of measures regarding the design of the device in order to increase the level of security when working with a motorcycle. They, in particular, include the presence:

  • protective casing to prevent bouncing stones and particles of garbage on the user,
  • a trigger blocking the gas so that the operator could not accidentally press the trigger and start rotation
  • cutting tool when the engine is launched,
  • anti.vibrational system to prevent the harmful effects of vibrating elements of a trimmer for grass on hand and other parts of the operator’s body.

Selection of oil

The first document that should be addressed when choosing an oil brand is a passport for a tool. The manufacturer not only indicates the characteristics of the lubricant, but also offers specific brands and trading names.

If there is no opportunity to contact the instructions, it is recommended to use only two options for lubricants:

  • Semi.synthetic motor oils that have the average cost (slightly higher than mineral). It is carried out by the shooting of high molecular weight petroleum products, produces slightly smoke and have good protection indicators of structural elements of the motor. Can be used both in domestic and foreign trimmers;
  • Synthetic motor oils that usually have the maximum cost in the assortment. This is the most reliable protection of the engine from wear, compatible with any power unit.

In addition to the fundamental type of oil, it will also be useful to read its letter marking to choose a compatible type according to the parameters. According to the European classification of the API, there are the following designations for two.stroke engines:

  • That. oil for small power plants (not more than 50 cubic meters. cm.), which allows us to recommend this particular type for motorcycles;
  • TV. lubricant for more voluminous engines, the working volume of which lies in the range from 50 to 200 cubic meters. cm. It is allowed to use this for motorcycles;
  • TS. motor oil for serious equipment (motorcycles, snowmobiles, scooters), which involves mixing with gasoline;
  • TD. lubricant for flood vehicles.

There is also a classification of the Japanese organization JASO, which in the assignment of marking has focused on the level of smoke secretion. These designations must be deciphered:

  • FA. when combustible, the release of smoke is slightly and barely noticeable with the naked eye. For countries where strict requirements for emissions into the atmosphere apply;
  • FB. slightly more noticeable smoke of white color, but more than in FA;
  • FC. transparent smoke that is not visible at first sight;
  • FD. oils that do not secrete smoke used to refuel water modes of transport.

You can also see the designations at the cans of “Self Mix” and “Pre mix”. The first option means that after adding to fuel, the mixture is not required to mix forcibly. The second option is that the gasoline-oil mixture must be mixed manually.

Using these three labeling options, just select the type and brand of the required lubricant. The question remains only in the ranking of manufacturers. Here are the most famous brands that produce only high.quality combustible materials:

  • Shtil is a popular manufacturer of gasoline equipment and consumable components for them;
  • Shell Helix Ultra. used for both cars and fine motor vehicles;
  • Motul. a universally recognized leader in the production of lubricants;
  • Lukoil is a brand of domestic production, which is not inferior in quality to foreign analogues.

It is recommended not to save in motor oil, since the uninterrupted operation of the power unit depends on this.

Rating of gasoline lawn mowers in quality and reliability, which is better for an uneven site

The assortment of lawn mowers, presented in a modern specialized market, is able to impress even the most sophisticated gardener: manual and self.propelled, gasoline and electric, at the most diverse prices, with many additional functions and capabilities.

A similar variety is both an advantage and a disadvantage. The advantage, because the user is given complete freedom of choice, and the disadvantage for the simple reason that not everyone can take advantage of this freedom in the absence of proper knowledge and experience.

To correct the situation, the following rating of gasoline lawn mowers was compiled by reliability and popularity among buyers. Having familiarized yourself with the information below, you will find out which gasoline lawn mower is the best, and you can make the right choice.

For greater information, the rating includes models from different manufacturers, presented in various price categories. And also if you are interested in which electric self.propelled lawn mower is better, we suggest you familiarize yourself with the rating of the best models of electric lawn mowers.

Read more: A mower: DIY Rotor haymaking, how to make homemade vases from the rear axle, how to remake a gearbox in the taiga

Husqvarna R 152SV gasoline gas mowing model

High.power productive unit to perform a large Spectra tasks. The model is equipped with a wide durable cutting deck made of high.quality stainless steel.

The user’s service is excellent for their technical and operational characteristics of the engine from Briggs Stratton. Among its additional positive features, the ease of launch and excellent dynamic indicators can be noted.

The related advantages of the model under consideration include the presence of a pre.installed Trioclip system (3 haircut modes are combined in one deck), as well as ball.bearing wheels, the reliability of which is evidenced by many positive reviews of satisfied customers.

To add the efficiency and comfort of operation, the Husqvarna gas station is equipped with a function of changing speed.

The gasoline lawn mower is equipped with a 1.5-liter fuel tank and rear-wheel drive. The maximum speed that this model is able to develop is 5 km/h. 2 haircut height options are available.

In the video the technical characteristics of this mowing.


Application area

Half.synthetics was developed for loaded technology of small mechanization: motorblocks, lawns, snowball players, pumps with gasoline engines and motorcycle, other air.cooled units, used for generators. Oil is also suitable for sports motorcycles with wet clutch, snowmobiles, ATVs, other loaded vehicles with an engine of 4T.

The lubricant Huter for four.stroke engines is adapted for conditions, designed for long.term operation of the internal combustion engine, due to additives extends the resource of units. Provides quick launch of low mechanization in the cold season.

How to navigate in prices

And the price of a lawn mower reaches up to 35000. Reiders or mini-tractor are more expensive, which, in addition to mowing, are endowed with many other functions.

The cheaper to purchase products right from the manufacturer or its representative. The price of the goods will include a percentage of the services rendered, which can significantly increase the amount.

In addition, the cost is affected by the material of manufacture, the country of origin, the popularity of the brand in the market and other factors.

How to choose a suitable brand of lawn mowers

When choosing a brand of a lawn mower, you need to take into account the fact that the main component of the device is the engine.

lawn, mowed, gasoline, self, propelled, fill

There are several manufacturers who make power units for garden equipment.

One of the most popular among them is the product of the American company Briggs Stratton. Usually these are four.stroke engines with a capacity of 3 to 6 liters. With. This brand has established itself well all over the world as a manufacturer of internal combustion engines.

Another famous manufacturer is Japanese Honda. A large margin of safety and an excellent motorcycle runs made lawmakers with such a motor, very in demand in the garden technique market. In addition, this company also produces lawnmands under its brand.

Among the high.quality power units can be distinguished by minarelli, Tecumzeh, Lombardini, Minsel. They develop power up to 7 liters. With. and provide the device for a long, reliable operation.

Among popular imported models, Japanese Makita, Swedish Husqvarna, American Partner can be noted. Craftsman and Bosch models are widespread in the market. The last two brands occupy a leading position in the ranking of garden technology of this class.

You can read everything here about what the semi.trailers are and how they are disassembled.

Domestic manufacturers in the garden equipment market are represented by plants of Garden Equipment Caliber LLC, INTERSKOL CJSC, Energomash, Enkor, ZAO ZAO OVK, Profer.

Before buying, make sure that the manufacturer has a service center near the buyer. If there is no one, even the smallest repairs can be a big problem due to the lack of components and specialists.

Let’s watch a video that shows a review of gasoline lawn mowers:

Choosing and using oil

By design, the engine of the gasoline lawn mower differs from the car engine only by the number of cylinders and air cooling.

Its closest analogue is moped engines, because they also have only one cylinder and air cooling. Therefore, the same oil is suitable for engines of gasoline lawn mowers as for cars or mopeds, which meets the requirements of the manufacturer for SAE and API.

Sometimes manufacturers recommend oil of a certain brand, but this is not due to the fact that it is more suitable for this engine, but with the desire to earn money or the obligations of partners, because the manufacturer advertises his products or products of his partner.

At the same time, such oil for “lawn mowers” has no real advantages, since automobile engines operate in much more severe modes, which means that the requirements for them are much higher.

In addition, it is important to choose the right oil depending on the type of base, because it can be:

The choice of the base depends on the age of the mowing and the presence of a carburetor:

  • 20 years or more. Only mineral.
  • 0-20 years old, carburetor. Mineral or semi.synthetic.
  • 10-20 years, injection. semi.synthetics.
  • 0-10 years old, fuel injection. Synthetic or semi.synthetic.

Webb Classic 41cm Self-Propelled Petrol Rotary Lawn Mower WER410SP

The use of properly selected oil and gasoline allows the gas mowing engine very carefully using their safety margin, so their service life can be decades.

The main parameter that determines the choice of gasoline or oil is the recommendation of the manufacturer, which can be found in the instructions for the operation of the device.

If there are no instructions at hand, you can use the advice that you found in the article. This will help you decide what kind of fuel to fill and what kind of oil is used for your gasoline lawn mower, regardless of the brand or specifications.

What gasoline to pour into a lawn mower with a four.stroke engine?

Now let’s tell you what gasoline to pour in a lawn mower with a four.stroke engine, the main difference of which is the presence of a crankcase. It contains oil for lubrication of the motor, therefore, in order for the device of this type to function normally, it is enough to season it only with gasoline. However, there are its own characteristics. Since the technique does not have an oil filter, which means it is not cleaned, it must be changed approximately every 50 hours of operation.

As for gasoline, who need to refill the lawn mower, it should not be a higher brand than recommended by the manufacturer of equipment. Since the higher the octane number, the longer the fuel burns. And this, in turn, can lead to significant problems and premature breakdown of the tool.

Everyone knows well that gasoline is a very easily inflammable substance, and its pairs are explosive. Based on this, we recommend always observing several simple rules that will ensure security for each user:

  • Before refueling, you need to let the engine cool down.
  • Pour only 92nd gasoline (not lower);
  • You can not work with fuel if there is open fire nearby, it is also forbidden to smoke.
  • To avoid poisoning with exhaust gases, pour fuel and launch in the open air or indoors with good ventilation.
  • It is not recommended to refuel the tank completely, it is necessary to leave a place to “expand” gasoline, which always occurs when it is heated.
  • Try to so that fuel does not fall on your clothes and shoes.

In general, the maintenance of gasoline engines of the lawn mower. A rather simple thing that does not require any special knowledge and skills from you. For units with a two.stroke engine, you need to learn how to prepare the combustible mixture correctly, as well as to clean the air filter in a timely manner. It is enough to change the oil with a four.stroke engine to change the oil and clean the air filter so that it serves you for many years by faith and truth.

Online store “Gardener”. make shopping from us is always pleasant

It is beneficial and convenient to cooperate with us because we:

  • We sell high.quality products, which is confirmed by certificates;
  • We allow, using our site, making purchases without leaving home;
  • We deliver to any region in more detail about the conditions for transporting goods can be found on our website;
  • All goods are provided with a mandatory guarantee and service is carried out.

If you could not decide which gasoline to pour in the lawnical mower, ask our specialists of interest to our specialists by phone: 7 (495) 135-29-39 every day from 10.00 to 20.00. They will provide all the necessary information for free for free.

How to prepare a fuel mixture

Pure gasoline is not used for engines with a working cycle of 2 strokes. The fuel mixture of fuel and lubricating fluid is prepared. Typically, proportions for the mixture are written on a gas tank. However, the general rule is applied here. Synthetic or semi.synthetic oil for the engine of the lawn mower is added to gasoline in the proportion: 1 part of the oil for 50 parts of gasoline. That is, a 0.5 liter of fuel is taken by a lubricant proportion of 10 ml. The mineral type of oil product is added to the fuel in the ratio of 1 part to 35 parts. That is, from 0.5 liters of gasoline it is required to mix 14 ml of oil. In order to measure the desired volume of lubrication, the most ordinary syringe will come to the rescue, having a standard or increased volume cylinder.

Preparation of fuel mixture for two.stroke engines

Experienced gardeners advise preparing a combustible mixture for the whole season at once. To determine how many solution it is necessary, you need to do simple calculations. The standard braid has a tank volume of about one liter. A liter of fuel is enough for an hour of continuous operation. This time is enough to put the lawn in front of the house. During the season, cut the lawn will need about 10 times. Then a ten.liter fuel canister is taken, 200 ml of synthetic oil for a gasoline lawn mowed is poured into it. Mineral lubrication will require 280 ml. It is best to store such a solution in metal containers.

Important! Specialists working in the field of service of garden equipment advise increasing the amount of lubricant if the motor is no longer new, strongly worn, or the mower is working with increased load. In this case, you can prepare a combustible mixture from the calculation of 25 parts of fuel per 1 part of oil. That is, 40 ml of oil should be used per liter of fuel. For 10 liters of fuel. 400 ml of lubricants.

Oil change

Oil replacement in the lawn mower is carried out once a year, provided that the equipment puts the lawn in order only in the summer. The right time is before the start of the season. It is necessary to replace the oil if in the midst of summer it changed color to black. It is also recommended to change the lubricant after running in the technique, that is, after 3-5 hours of work since the first launch.

For the convenience of consumers, manufacturers of garden equipment offer special for replacing an oil product. The set includes several items:

  • Before changing the old oil, the mower is turned for 10 minutes. Warm oil merges easier, it also removes along with impurities and garbage.
  • After they are waiting for the technique to cool down. This requires 5 minutes.
  • It is important to disconnect the spark plug and drain gasoline.
  • Further, using a pump or syringe, a lubricant is pumped out. Some models have a cork through which fluid remains come out. It is located in the lower part of the case. It is necessary to completely remove the worked out product.
  • If the owner saw the oil in the air mowing filter, then during the replacement of the lubricant, the filter is cleaned and the filter.
  • Fresh oil shimmers through the neck with the help of a funnel into the crankcase. The fluid level is checked by the probe. Usually, to fill the oil container, 0.5 liters of material are enough.

Figure out how to refuel a lawn mower, what kind of oil and fuel to buy, it is easy. In general, it takes about half an hour to replace the lubricant. For the preparation of the fuel mixture and refueling the time of time, it takes even less.