Oil check in Stig Lawn mowers. Video review of the operation of the lawn mower Stiga Combi 44 e

Stiga brand lawners (Styga): Review of the lineup

Stiga brand belongs to Global Garden Products Sweden AB Corporation. This company is large European manufacturers of garden equipment and tools, equipment for processing soil and other professional and domestic use techniques. The GGP Sweden AB technique is implemented not only in Sweden, but also in other European countries. Ukraine, Belarus, Kazakhstan, and the Baltic countries.

The company produces such types of products:

• trimmers for grass;
• lawn mowers;
• Professional category minibrators;
• Boisters;
• cultivators;
• Garden riders;
• grinders;
• snowmers;
• Electric and gasoline saws.

The quality of the products is not doubted, because the best engineers and mechanics work on the development and production of equipment. For more than 60 years, since the merger of the Swedish concern “Stiga AB” with Italian manufacturers of Castelgarden and Proffessionalgarden, the company produces equipment that facilitates the work of farmers, builders and utilities.

Separately, it is worth mentioning the attention paid by the manufacturer of the safety of the technology and its environmental perfection. GGP Sweden AB takes care of the environment, therefore it produces environmentally friendly electric models of lawn mowers and trimmers, and also guarantees the protection of the buyer in case of breakdowns.

The manufacturer gives a guarantee for a period of 60 months for all branded goods, including lawn mowers and trimmers for grass.

There is also gasoline equipment in the model range, and the number of names of such technology is quite large. A vivid illustration of GGP Sweden AB care about the environmental safety of the planet is the release of gasoline lawn mowers with a distinctive symbol of “Swan” (SWAN). Such a symbol in the Scandinavian countries marks environmentally friendly technology.

Switching range of garden technology

The assortment of the Steig garden technique is very wide. However, it is worthwhile to dwell on a segment such as a lawn mower. Traditionally, like any manufacturer, in Stiga mowers are divided into three large categories: gasoline, battery and electric. Available series of Stiga: Collector, Combi, Turbo, Multiclip, Dino, Exel, Turbo Exel, SLM, Twinclip.

Electric are represented by the following positions:

• COLLECTOR series: 43, 46, 46 b, 46 S, 46 SB, 53SB, 46 SH;
• COMBI series: 46, 48, 48 b, 48 SQB, 48S, 48 SB, 48 SH, 53 SQB, 55 SQB, 55 SQH, 53 SB, 53 SQH, 53 SQ BW B, 48 SQ BW B, 46 SB, 46 S, 46 b;
• Twinclip series: 50 SEQB, 55 Sveqb, 55 SVH;
• Series TURBO: 53 SevQb, 48 S BW Plus H, 48 S BW Plus B;
• EXCEL series: 55 SVQH, 50 SVQB, 55 SQB, 50 SQH, 50 SQB, 50 S4Q Inox B;
• Series Turbo Exel: 55 S4 Inox B, 50 SB, 55 SB;
• DINO series: 47 b, 47 b.
• Multiclip series: 47 ae, 50 SAE;
• SLM series: 3448 AE, 3648 AE, 4048 AE;
• COMBI series: 43 AE, 43 SAE, 48 AE, 48 SAE, 50 SAE, 55 SAE, 40 AE, 36 AE.

The average duration of the battery braids with full charge is about 2 hours.

For example, on the Stiga Multiclip 47 AE lawnapers, a lithium-ion battery is installed. The capacity of such a battery is 4.0 ah.

Advantages of the battery models:

• complete environmental friendliness;
• economy (no need to buy gasoline, constantly look for a current source to include a mowing in the network);
• multi.layer durable plastic of high quality. does not pollute the environment;
• powerful engine;
• the ability to work where and anytime;
• complete autonomy;
• Absolute protection against overheating.

Of the shortcomings of the battery models, according to reviews, the following can be distinguished:

Basic equipment

The basic package of the Stiga turbo 53 lawn mower includes the following components:

• wheels (rear 380 mm., Front 200 mm.);
• housing with an engine;
• gas tank;
• control handle;
• removable grass collector with a capacity of 60 liters;
• knife;
• engine brake lever;
• The drive lever;
• throttle control device;
• protection against stones;

The equipment of the Stiga Combi 53 SB lawn mower model is similar to the set of the above modification.

Specifications

With the instructions for the operation of the lawn mowed Stig Turbbo 53m, you can familiarize yourself with the link.

Description and technical characteristics of models

Stiga produces several model lines of lawnmands, among which are the most famous series as Multiclip, Collector, Combi, Twinclip. Interestingly, both gasoline and electrical/battery models can include one line.

A separate variety is mowing robots-self-propelled devices operating according to a given program and do not need constant control from a person.

Operating instructions, servicing trimmers Stiga

For high.quality work, motorcycles during the warranty period and after it must observe simple operating rules, and maintain maintenance in a timely manner. The basic rules for using a trimmer for grass are as follows:

• Contact the technique neatly, do not use a trimmer for grass in the rain or immediately after the rain;
• Never work with a trimmer in areas whose inclination exceeds 20 degrees;
• refill gasoline motorcycles away from sources of fire;
• gasoline trimmers need to adapt to the load, the adaptation of the engine is called a gluing, it is produced for all new gas stations that have not previously been in work;
• After the full gas tank is generated, let the engine cool the engine, and then, if necessary, share the fuel and continue to work;
• Clean the trimmer for grass after each use;
• Do not store the equipment in a raw room;
• protect children from random inclusion of motorcycles. the cutting parts of the structure are dangerous and very sharp.

Oil and fuel for gasoline trimmers Stig

For four-stroke engines, use AI-95 gasoline and universal engine, SAE 10W30 classification, for two-stroke engines AI-92 gasoline and motor oil with 2T mark. An approximate proportion of mixing oil and gasoline for engines 2t. 1:50. Malfunctions

“I am the owner of the gasoline motokos. Stiga SBC 425 HD. The Honda engine is four.stroke, the power of my lawn mower is 1000 watts, and as for me, this is the perfect assistant to the garden. I do not wave up for large volumes of work, I need a mowing, mainly to maintain the beauty of lawns, haircuts of grass under the trees.

Advantages: Power, this is the very first and most important advantage, then a small weight, is in the set of a belt in order to hang the device on the shoulder. Minimum vibration, good cut quality.

Disadvantages: good fuel consumption, fast enough.

As for high consumption, this is a gasoline technique and wait for it to work and not eat gasoline, this is stupid. Parameters and power. super! Great trimmer for Steg grass! I recommend this particular manufacturer, they know their job and do good equipment “.

“I have a trimmer ectric for the grass Stiga St 750, its power is 700 watts, for small sections. perfectly. During the time from the moment of purchase, and this is already three and a half years, I don’t know grief with him, I didn’t repair it, I didn’t fool around, and mowed and mowed.

Advantages: Great work, the declared power coincides with the actual, the fishing line for the trimmer is double, and this is a big plus, in my opinion. Does not pollute the air, for me it is important.

“I have been using Stiga SBC 653 KD for 2.5 years a trimmer for 2.5 years. The engine is a two.stroke kavasaki, but it gives out a capacity of 2000W, not every lawn mower can, I know, I know, there is experience of using. Yes, he eats up gasoline, of course, but the technique is bought to work. If you save on everything, then you can get to the mowing manual scythe, as in childhood by a grandmother in the village. If without jokes a trimmer for the grass is excellent, I am very pleased. He has a knife that mows any vegetation, in general any! I highly recommend this model for large areas and lawns with dense vegetation “.

How to change oil in a lawn mower: step.by.step instructions

So that this task does not create unnecessary difficulties for you, we recommend that you observe a certain sequence of actions.

Preparatory work

Like any maintenance, oil replacement begins with preparation. First of all, choose a suitable place. Keep in mind that the lubricant can spill, so you should not change it on the grass or ground, on the adjacent platform. Half of the garage or access platform in front of it, household unit, blind area away from the house is well suited for this. The main requirements:

If possible, at least extraneous garbage.

We also recommend covering the working space with a film. She will squeeze the dust, and the clock will not let go.

Before you start replacing, start the engine and let it work for about 5-10 minutes. During this time, the oil warms up and will become more liquid. It will be much easier to drain it. However, a hot engine is a risk of burns, so use protective equipment. At least put on gloves. And to prevent random starting the engine, de.energize the spark plug.

The final stage of preparation is the cleaning of the space around the oil.packed neck. Dust accumulated here and the earth when unscrewing the cork can enter the crankcase. And this, in fact, is a small abrasive that can damage moving elements.

Drainage drainage

Enough the lubrication system can be in various ways. The simplest of them is to use a special drain plug:

Tilt the unit to the side. the cork is usually located on the bottom of the engine;

Find it and unscrew it with a end key. act carefully so as not to disrupt the threads and warehouse edges;

Substitute the container for collecting;

Tilt the lawn mower so that the oil starts to pour out;

After draining the entire lubricant, tighten the cork back.

If you get to the drain neck, then you can remove the old oil through the filling hole. The sequence of actions here is the same, but there are several features. Most importantly. make sure that the resulting development does not get to the air filter. Part the mower so that when it tilted, the filter is at the highest point. In addition, do not tilt the unit too strongly, otherwise the oil can pour the engine.

You can use special devices to remove old oil. siphon or pump. The first works as follows:

Pull the probe and immerse one end of the siphon tube into it, bringing it to the bottom of the crankcase;

Place the second end of the tube in the oil tank;

Tilt the mower to the side and fix it with stops;

Using a siphon, pump oil from the engine to the tank.

A syringe for draining the development works in a similar way. The difference here is that the oil does not drain immediately in a third.party container, but accumulates in the syringe. Having filled it out completely, we pull it out of the crankcase and squeeze it out with the piston.

Pour fresh grease into the engine

Before replacing the oil in a lawn mower, again check the instructions. Make sure you are going to pour a really suitable product that is recommended by the manufacturer of your gas tools. In addition, it should be spelled out how much lubrication needs to be poured into the engine. Pour less. protecting the rubbing parts will be weaker than the required. Pour more. excess pressure in the lubricant can produce engine gaskets. Therefore, strictly follow the recommendations. In most modern gas-coculuscs with an engine, 500-600 ml of motor oil is poured on 4-tact.

Many manufacturers of lubricants equip their canisters with telescopic tubes, allowing oil to serve exactly in the filling neck. If there was no such “assistant” in your chosen version, then use a funnel of the right diameter.

Pour the required volume of oil into the crankcase and leave it for about 2 minutes, so that the lubricant is completely glass into the tank. After that, measure its level with the probe. If everything is in order, then we twist the flooding plug. Also do not forget to return the wire to the electrode of the candle.

Before you start mowing grass in your garden, give the lawn mower for several minutes to prepare for work. After that, the care of your garden equipment can be considered completed. Next, control the level and condition of the oil and track the time.

Replacement recommendations

It is important not only to choose high.quality oil, which in its characteristics will be suitable for your technique. You also need to know how to properly fill it into a lawn mower. The rules are simple, but mandatory for execution:

• We turn on the unit and warm the engine idle for a quarter of an hour;
• Remove the cork from the tank and substitute the container of the desired volume for collecting a spent liquid;
• We tilt the lawn mower and drain the developed material;
• Twist the plug, put the unit on the maximum flat surface. After that, you can open a hole from above;
• Pour a new working fluid, observing the recommendations of the manufacturer of the equipment relatively volume, check the fluid level conveniently with a probe;
• When the amount of liquid has reached the desired volume, you can tighten the cork.

In most cases, about 500 ml of fresh oil should be used to replace the waste fluid. This norm corresponds to most of the units, which are common on the territory of the exception, of course, there are, therefore, you need to study the instructions before the replacement of the waste fluid.

If your lawn mower is equipped with a two.stroke engine, and this indicates the need to mix a lubricant with gasoline, then this must be done immediately before replacement. It is impossible to make such a composition with a margin, because due to a chemical reaction, the mixture loses its properties. The approximate expiration date is no more than a month. Only components will be spoiled from such actions.

It is strictly forbidden to pour out the waste liquid to the ground or into the sewer. The development should be given to special points for processing. It can also be used for personal purposes. Be responsible and do not pollute the environmental liquids.

How to replace oil in a gozono.core

Wikihow works on the principle of wiki, which means that many of our articles are written by several authors. When creating this article on its editing and improvement, 11 people (a) worked, including anonymously.

The number of views of this article: 19 933.

Simple instructions for replacing oil in the Briggs Stratton engine or another manufacturer engine.

Before any actions for maintenance of the lawn mower, disconnect the wire leading to the spark plug.

Pump gasoline from the tank with manual pomp. This will not allow gasoline to spill onto the lawn mower and prevent a fire that can start from the spark plug. The damaged candle wire or a candle itself can cause the fire spilled on the base of the fuel mower.

Find the oil plug under the base of the lawn mower. Most of them are square and fit for a wiper head by 10 mm. It can also be just a traffic jam or bolt.

Blind or hold the lawn mower while you loosen the oil cork with a wrench. Do not forget to substitute a container for drained oil under the base of the mowing.

After the last drop of oil leaks, return the oil plug or bolt to place, but do not tighten or seal yet. With the help of a funnel, pour the drained oil into a bottle or any other container suitable for sending it for processing. Local utilities must carry out such processing.

After the cork is closed and sealed, prepare new oil to pour it through the filling hole to the desired level. In some lawn mowers, the filling hole is located on top, where the oil probe is located, in others it is below on the base near the engine. The described lawn mower does not have an oil probe. it must be poured with oil through the oil cover almost to the neck. Use standard engine oil 10W30 or 5W30.

Check that the oil cover is worn on the pouring hole and then fill the gas tank and set the wire on the candle.

Tools and materials

You may need a set of tools:

• Oil Container container;
• clean, dry rags, napkins or towels;
• end key with the corresponding nest;
• empty plastic containers (household with lids);
• engine oil;
• set of wrenches;
• trumpet;
• sling syringe;
• siphon.

Removing old oil

Extracting old lubrication is one of the most important stages of the process. To make sure you remove a large amount of old oil, you can use three methods.

• Use a siphon. Insert one end of the tube into the hole for the probe, to measure the oil level until it reaches the bottom of the oil tank. Place the other end of the siphon in a constructively strong container that you will specially use for this and future change of grease. Finally, place wooden blocks or other durable material under the wheel of the mowing on the opposite side of the hole for filling. In the lawn mower under the slope, it is easier to remove almost all the oil.
• Remove the oil cork. Depending on the type of gasoline braid, you can remove the oil cork to drain the old grease. Contact the user’s leadership to determine the location of your drain plug and make sure that you have an end wrench of a suitable size for work. By installing the wrench on the plug, remove it. When the oil is completely dragging, you can replace the cork.
• Use such a special device as a syringe for pumping and filling the oil tank. This is very convenient when the hole of the tank is too narrow, and at the same time it is inconvenient or impossible to fill the new oil from the bottle. The syringe can easily pass through the hole to pump out the old waste oil.

• Tilt method. If you do not have access to a tank with butter, you can drain it by tilting the lawn mower to one side. When tilting the lawn mower, set the lid of the flood neck on the container that you use to collect the waste oil. After the correct location, remove the lid of the flood neck and let the clock completely drain. Using this method, you should know exactly what fuel level is in a lawn mower. It is also important to note where the air filter is located, so as not to pollute it with drain oil.

Questions and answers

You have a question about Stiga Combi 748 S, but you cannot find the answer in the user manual? Perhaps Manoalscat users.COM will be able to help you and answer your question. Fill in the form below. And your question will be displayed under the guidance for Stiga Combi 748 s. Please make sure you describe your difficulties with Stiga Combi 748 S as detail as possible. The more detailed your question is, the higher the chances that another user will quickly respond to it. You will be automatically sent an email to inform you when one of the users answers your question.

Page 1

Ru. 1 Ru attention!: Before using the machine, carefully read the given operating guide. Save it for future use. Contents 1. General information. 12. SAFETY REGULATIONS. 13. Familiarization with the machine. 3 4. MOUNTING. 4 5. Controls. 4 6. Using the machine. 4 7. MAINTENANCE. 6 8. STORAGE. 6 9. Moving and transportation. 7 12. Additional accessories to order. 8 1. General information 1.1 How to read this leadership in the text of this leadership, individual paragraphs containing especially important information about the technique of non-shaped or the principles of the device, are highlighted as follows: a note or important contains clarifications or other previously mentioned information in order to avoid the car or to break the machine damage. The symbol means danger.Failure to comply with this warning may bring in the receipt and/or damage. The points framed by the gray dashed frame contain a description of the optional characteristics that are not inherent in all the models presented in this guide. Check if there is this characteristic in your model. All designations are “front”, “rear”, “right” and “left” are indicated regarding the operator’s working position. one.2 designations 1.2.1 drawings of drawings in this operation manual for me, vanes 1, 2, 3 and so on. The components shown in the drawings indicate the letter a, b, C and so on. Link to component C in Figure 2 is carried out using the phrase: “see. rice. 2.C “or just” (rice. 2.C) “”. Images in the drawings are approximate. Real details may differ from the depicted. one.2.2 Names of the chapters, this leadership is divided into chapters and paragraphs. Point called “2.1 training “is an subparagraph of the chapter” 2. Safety regulations”. Links to chapters and points are both reduced by. or paragraph and corresponding number. Example: “GL. 2 “or” Clause 2.12. Safety rules 2.1 Learning, read the controls and the proper use of the machine.Learn to quickly stop the engine.Non-compliance with precautions and recommendations can lead to fires and/or serious injuries. In no case do not allow children or persons to use the machine who is not well familiar with the right to handle it. Local legislation is able to establish the minimum age of the user. Never use the car if the user is tired, feels bad or is under the influence of drugs, drugs, alcohol or substances that lower the speed of reflexes and the level of attention. Do not transport children or other passengers by car. Remember that the operator or user carries response for accidents or damage caused to other persons or their property. The user is responsible for evaluating potential risks on the site where he works, in addition, he must take all precautions to ensure his safety and safety of others, in the specialty on the slopes, uneven, slippery or unexplored surfaces. If you intend to transfer or lend the car to other persons, make sure that they got acquainted with the instructions for operation set forth in this manual. 2.2 Preparatory operations of personal protective equipment (PPE) put on suitable clothing, solid working shoes on non.slip soles and long trousers. Do not start the car barefoot or in open sandals. Put on headphones to protect the organs. Using the protection of hearing organs can reduce the ability to hear warnings (screams or avar signals). Pay special attention to what is happening around the working site. In all situations where there is a risk of hand, hope protective gloves. Do not put on shaws, bathrobes, necklaces, bracelets, getting clothes, as well as clothes with laces and ties, as well as any hanging or wide accessories that can get stuck in the car or in objects and materials located at the workplace. Strongly collect long hair. Work plot / car carefully inspect the working area and remove everything that can be thrown out by the machine, or damage the cutting device / rotating organs (stones, branches, wire, bone, etc.D.). Internal combustion engines: fuel danger! The fuel is easily ignited. Keep fuel in special cans of certified for this purpose, in a safe place, far from heat sources and open flame. Clean the canister of the remains of grass, leaves or out of the lubricant. Do not leave canisters within the reach of children. Do not smoke during a gas station or fuel value, but in general when handling fuel. Pour fuel through the funnel, only in the open air.

Page: 2

Ru. 2 Avoid inhalation of fuel vapor. Do not add fuel and do not remove the tank plug when the engine works or when it is hot. Slowly open the tank plug to gradually throw internal pressure. Do not approach the flame to the tank gas station to check its contents. In the case of fuel spill, do not start the engine, take the car from the fuel spill and take measures to prevent the fire until the fuel evaporates and its pairs will not be scattered. Remove all the traces of the fuel that is carried on the car or to the ground immediately. Always return to place and tightly twist the traffic jams and canists with fuel. Do not start the car at the dressing site; The launch of the engine must be carried out at a distance of at least 3 meters from the refueling site. Avoid contact of fuel with clothes and, in this case, change clothes before starting the engine. 2.3 During operation, the working area do not turn on the engine in a closed area where dangerous carbon monoxide can accumulate. Launching operations should be carried out in the open air or in a well.ventilated room. Remember that exhaust gases are toxic. During the launch of the car, do not direct the silencer and, therefore, exhaust gases for flammable materials. Do not use the machine in an explosive environment, close to combustible liquids, gas or dust. Electric barbecue generates sparks that can lead to dust or vapor fire. Work only in daylight or in good excreted light, in good visibility. There should not be adults, children and animals on the working area. It is necessary that another adult is looking for children. Avoid working on wet grass, in the rain or if a thunderstorm is nearing, especially if lightning is possible. Pay special attention to the irregularities of the soil (nomadic, ditches), bias, on hidden dangers and the presence of possible obstacles that may limit the appearance. Caution, working next to cliffs, ditches and the banks of water bodies. The car can call out if one of the wheels moves over their edge or if the edge collapses. On inclined lawns, work in the transverse direction and in no case up/down, be especially careful when changing the direction and always have your own point of the support, and also make sure that the wheels do not encounter obstacles (stones, branches, roots and t.D.), which can lead to lateral slipping or loss of control over the machine. When you work by car next to the roadway, take into account the potential presence of vehicles. In order to avoid fire hazard, do not leave a machine with a hot engine among the leaves, dry grass or other flammable materials. Rules of conduct during work be careful when moving in the back or back. When moving in reversing, look back and during movement to make sure that there are no obstacles. Never work, just step. Avoid situations when the lawn mower pulls the operator. Always hold your arms and legs at a distance from the cutting device both during the launch and during operation by car. Attention: The cutting element continues to rotate within a few seconds after it is turned off or after turning off the engine. Always hold on the distance from the opening for you. Do not touch the engine details that heat up during use. The risk of burns. In the case of breakdowns or accidents during operation, turn off the engine and remove the machine so that it does not cause even greater damage; if the accident is called and the operator or third parties is injured, immediately take measures to help the victims most suitable for the end. a strong situation, and contact a medical institution for the necessary treatment.Carefully remove the Mathel, which can cause damage or injuries to people and animals that may not notice it. Restrictions in use never use a machine with damaged, absent or incorrectly arranged protective devices (grass collector, lateral emission protection, rear emission protection). Do not use the machine if the additional equipment/tool ​​is not installed in the provided places. Do not turn off, do not turn it off, do not remove and do not break the available protective devices/micro-displayed. Do not change the parameters of the engine, this can lead to overload. If the engine works at too much speed, the risk of injury increases. Do not expose the car with excessive loads and do not use a small machine to carry out hard work; Using a suitable machine reduces risk and improves the quality of work. 2.4 Maintenance, storage and transportation regular maintenance and proper chiefing are the key to the safety of the machine and the support of its operational qualities. Maintenance in no case use the car with worn out or damaged parts. Damaged and worn parts must always be replaced, they are not subject to repair. To reduce the risk of fire, you should regularly check the absence of leakage of oil and/or fuel. During the commissioning of the machine, it is necessary to work very carefully in order to avoid fingers in the gap between the moving cutting device and the unreal units of the machine. The values ​​of the noise and vibration level specified in this manual are the maximum work values ​​of the machine.The use of an unsbged cutting element, too high speed, lack of maintenance significantly affect the noise level and vibration. Therefore, it is necessary to take preventive measures to eliminate possible damage caused by high noise and vibration loads;