Ratio of oil and gasoline for Husqvarna chainsaw

What is the proportion of oil and gasoline for a chainsaw

Benefits of branded oils

Many domestic and foreign manufacturers specialize in the production of special motor oils, but the highest ratings are for branded products from Stihl, Husqvarna and Makita.

Only in certain parameters are the domestic motor oils of the Lukoil trademark inferior to the branded assortment.

The list of advantages of branded motor oils includes:

  • economical consumption;
  • stability of performance under difficult operating conditions and during long-term storage;
  • minimum amount of toxic compounds in exhaust gases;
  • almost complete absence of carbon deposits.

According to the American classification, API-TB oils can be used for work in household and professional models. The Japanese counterpart is JASO-FB and JASO FD. Preparation of a combustible mixture using oil for 4-stroke engines is strictly excluded..

Red, green or any other color of oil determines the product’s belonging to the assortment of a certain manufacturer, therefore, when determining the characteristics of the material, it is not taken into account. Be extremely careful when choosing a motor oil of unknown composition and origin..

Until you receive additional information about the quality and operational parameters, it is better to temporarily refuse to use such material..

It is allowed to mix motor oils of the same type in composition and purpose, produced by brands known for the quality of their assortment. Under no circumstances is it allowed to mix mineral and synthetic oils..

Proportions for Swedish Husqvarna chainsaws

ratio, gasoline, husqvarna, chainsaw

Depending on what power is required to be obtained from the units, the appropriate component dilution is selected:

In one liter of fuel, 40 to 50 parts of oil are diluted. These are the ideal proportions of gasoline and oil..

Along the way, we inform you that only unleaded gasoline of the AI-92 or AI-95 brands is used. Leaded combustible product is considered a poor choice for internal combustion engines, as it shortens the engine’s service life..

How to increase the life of your chainsaw?

The chainsaw will be technically sound on one condition:

when buying a tool, read in detail the instructions and recommendations of the manufacturer for use.

Strictly adhere to and comply with the requirements for the selection of components for the formation of a combustible mixture consisting of gasoline and the recommended oil.

It is impossible to use oils intended for motor vehicles to form a working product. It is strictly forbidden to do this..

How to mix fuel for chainsaw

Why add oil

At the heart of any chainsaw is a two-stroke internal combustion engine. It is one of the simplest single-cylinder mechanisms and does not have a separate lubrication system. The technology is such that the lubricant must enter the cylinder along with the fuel mixture, settle there, and lubricate the cylinder walls, piston rings, etc. The simplicity of the design of the tool has many advantages, among which the main one is the ability to carry out repair work on the engine and component parts independently.

Diluting gasoline that is poured into the chainsaw is required in order to extend the life of the tool. It is imperative to dilute fuel with chainsaw oil, and if, for some reason, you forgot to do this, then the operation of the tool is absolutely contraindicated.

It is important to know! Chainsaws do not have a special tank for filling oil, which would be used to lubricate the rubbing engine parts, like on cars. This is due to the simplest design of a two-stroke motor. The present tank for oil in chainsaws is designed to lubricate the chain and bar during the operation of the tool.

Read more:  Chainsaw Stihl 660: Chinese Version.

Important conditions

Power plants in chainsaws are internal combustion engines fueled with certain brands of gasoline diluted with the required parts of oil..

Knowledge and strict adherence to the preparation of a combustible mixture is the key to long-term operation, productive use of small-scale mechanization units.

The main fuel component is the AI ​​grade. It is not recommended to use below or above 92 octane number. Optimal for many types of mechanized sawmills of domestic or foreign manufacture.

The ideal ratio of gasoline to chainsaw oil:

  • increases the performance of the unit;
  • increases the service life;
  • saves money.

Husqvarna HP structural firm

The brand structure of the Swedish manufacturer Husqvarna HP includes a company that produces mechanized hand tools and lubricants for them, effective chemical additives.

The manufacturer for the chainsaw Partner has developed an original ratio of the proportion of fuel and oil for two-stroke power plants:

The mixing ratio of the fuel consistency is derived from the standard formula 1:50. This is a constant. That is, 20 milliliters per 1 liter of AI-92.

There are moments of non-compliance with the standard approach to dilution with a lubricant of the company’s own production. This is when the internal combustion engine goes through the running-in stage. A combustible mixture is allowed for the engine in a value of 1:40.

Impression of the availability of official information

Husqvarna chain oil

This type is represented by two brands at once. For ease of comparison, their characteristics are presented in the table..

Obviously, all other things being equal, Vegoil has a wider range of applications and lower consumption. The manufacturer sells these two brands at the same price, so the younger Vegoil brand is the most preferable..

This is what Husqvarna chainsaw chain oil looks like.

Husqvarna Air Filter Oil

The range is represented by one product Air filter oil. It is a pale yellow liquid with a characteristic odor. Supplied in opaque white canisters with a capacity of 1 liter. The product guarantees effective trapping of airborne particles and prevents them from entering the combustion chamber.

In the photo on the right, oil for the air filter of the Husqvarna chainsaw

And the rest?

Husqvarna 2-stroke engine oil

Husqvarna chainsaws are equipped with two-stroke engines only. For all engine models, the manufacturer currently offers one universal brand – Husqvarna HP – which is often referred to by sellers as Husqvarna 2t oil. It is a brown liquid with an organic solvent odor. The viscosity at 40 ° C is 57.5 mm 2 / s. Very slightly soluble in water. In terms of chemical composition, it is classified as semi-synthetic. The company’s engineers emphasize the orientation of their product towards operating conditions in Russia and declare the content of additives that prevent the growth of deposits when using low-quality gasoline.

Supplied in 1 liter black cans with labels on opposite sides of the container. Note that on the reverse side of the label, in addition to the classic mandatory information, there is a recipe for preparing a fuel mixture for a Husqvarna chainsaw (and other saws). The canister is equipped with a translucent strip with risks for the convenience of assessing the remaining volume of liquid. Now, unfortunately, a dispenser is not included in the purchase package, but this is not critical.

To prepare the fuel mixture for your Husqvarna chainsaw, you must strictly observe the oil to gasoline ratio..

It is well known that if you reduce the proportion of the first component, then in the engine of the chainsaw there is increased friction, which contributes to accelerated wear. If the oil is added above the norm, then carbon deposits will appear on the spark plug, which complicates the start of the chainsaw and can lead to the disappearance of the spark, and carbon deposits on the piston can even lead to burnout due to a decrease in the cooling intensity.

The proportion of oil and gasoline for a Husqvarna chainsaw is indicated as 1:40. This means that 1 liter of fuel requires 25 ml of lubricant..

Before buying, make sure you are purchasing a 2t letter canister and not a 4-stroke (4t) lawnmower lubricant. The two-stroke oil differs significantly from the four-stroke oil in terms of its characteristics and scope. To reduce the likelihood of an error, 2t and 4t of products are packed in cans of different shapes.

Which Husqvarna oil to choose for your chainsaw?

Our review – Husqvarna chainsaw oil – is devoted to a description of the lubricants offered by the manufacturer for their own and third-party gasoline saws. We are based on the official information of the developer company, and when using other sources, we clearly indicate this in the text.

Read more:  What You Can Do From A Chain From A Chainsaw

How to refuel your Husqvarna chainsaw

In addition to gasoline, your Husqvarna chainsaw needs three more fluids to function:

How to Mix Fuel for a Husqvarna Two Stroke Engine Chainsaw

  • two-stroke oil;
  • chain oil;
  • air filter impregnation oil.

Let’s talk about them in order.

Risks of using fuel and oil surrogates

To avoid premature failure of the chainsaw, it is recommended to refuel the tool with exclusively high-quality and branded consumables. Finding such materials is not difficult, as they are usually sold in branded retail outlets. The use of low-quality gasoline can lead to engine failure, therefore, it is recommended to buy fuel at such filling stations where high-quality fuel is guaranteed..

It is categorically contraindicated to mix gasoline with motor oil for cars, since it is not at all intended for such purposes. Compliance with the number of proportions, as well as the use of high-quality materials will extend the life of your tool for many years.

Important conditions

The power plants in chainsaws are internal combustion engines fueled with certain brands of gasoline diluted with the required parts of oil..

Knowledge and strict adherence to the preparation of a combustible mixture is the key to long-term operation, productive use of small-scale mechanization units.

The main fuel component is the AI ​​grade. It is not recommended to use below or above 92 octane number. Optimal for many types of mechanized sawmills of domestic or foreign manufacture.

The ideal ratio of gasoline to chainsaw oil:

  • increases the performance of the unit;
  • increases the service life;
  • saves money.

The proportions of gasoline and oil for chainsaws: features of the preparation of the fuel mixture

The fact that it is prohibited to pour “clean” gasoline into chainsaws is warned by sellers of buyers at the time of purchasing the tool. Many buyers find out about this for the first time, wondering why it is necessary to dilute gasoline with oil. If you neglect this rule, then the consequences for the tool can be simply catastrophic. In most cases, even a major overhaul of the engine will no longer be able to help. In the material, we will find out what the proportions of gasoline and oil should be for refueling a chainsaw, and also what the risk of non-compliance with this rule.

The highest quality product is considered to be the product of Husqvarna, followed by Lukoil machine oil..

The advantages of these oils:

  • Low consumption.
  • Maintaining quality.
  • Ability to maintain technological qualities for a long time.
  • Can work in extreme conditions.
  • No toxins.
  • The minimum amount of carbon deposits.

Many professional tools use a lubricant made using API-TB technology (USA). Products made according to the JASO-FB method (Japan) are also popular..

It is permissible to mix oils from different brand manufacturers with similar characteristics. Mineral and synthetic oils are incompatible. The best oil for household chainsaws is considered “Standard”, for professional equipment the technical fluid “Ultra” is optimal.

Some oils can successfully replace each other. For example, substances produced by Husqvarna and Stihl. Lubrication for scooter engines or motor boats is not suitable for chainsaws, the oil quality in them is low. If the proportions of oil and gasoline are not maintained, then the tool will quickly fail due to the abundant formation of carbon deposits..

How much oil is required to add to gasoline?

Types of oils used for dilution in gasoline

Chainsaws do not have oil pumps, so combustible mixture alone cannot be used. You should carefully read the instructions that are attached by the manufacturer to each product. There is a lot of information on the Internet, it is not difficult to find it.

If there is no lubrication, the saw will fail after a short time. It is recommended to do preventive maintenance of the unit, fill in correctly diluted fuel, in this case the tool will function for many years.

If you take, for example, a Husqvarna chainsaw, then unleaded gasoline with the first addition of grade 92 is suitable. If the composition has a greenish color, this indicates that the product is a premium class. AI-92 is the optimal product that can be suitable for such a device. On average, professionals advise adding 20 to 50 ml of machine oil per liter. If the power of the unit is one and a half kilowatts, then only 25-27 ml of oil will be required.

Read more:  How to Find the Chainsaw Tire Size

How to dilute engine oil and gasoline, in what proportions? This question arises for all users. First you need to stock up on containers:

  • Measuring liter bottle
  • A watering can, which will allow you to pour the substance into the tank

The process of mixing oil and gasoline is technologically simple. It is important to observe safety precautions so that static electricity does not accumulate, not a drop of water gets into the fuel.

Types of oils used for dilution in gasoline

What proportions should be done? The engines are mostly two-stroke, so the mixture is usually 1:50. Russian-made chainsaws function with products of the following brands:

For foreign analogues, it is permissible to use two liters of gasoline per 80 grams of oil. Foreign saws are distinguished by economical fuel consumption, the proportions of oil in them vary from 40 to 49 shares.

Oil shades can vary significantly, this should be taken into account during operation. For example, HP produces reddish engine oil. If the composition has a greenish (sometimes blue) tint, then this is a sure sign that the product is synthetic premium. The quality of such compositions is high, the cost is also rather big.

How to refuel the saw

A plastic bottle is best for refueling your chainsaw. The volume of the container should be equal to two liters if you will use the tool frequently. A smaller container should be used when you rarely use the saw..

Dilute fuel and lubricant in a separate bottle. It is necessary to observe the exact proportions, which are indicated in the instructions. It is recommended to leave an empty space in order for the liquid to mix well..

Such a mixture should be stored no more than two weeks. Be sure to shake the bottle before use. Experts do not recommend diluting a large amount of the mixture at once and storing it for years. The storage temperature should not exceed twenty-five degrees Celsius. If more, then the shelf life is reduced..

Refueling your chainsaw with oil

Long-term storage of the mixture greatly impairs the traction capabilities of the engine. Carbon deposits form, the ability of the pistons to move quickly is reduced.

How to dilute gasoline with chainsaw oil

The chainsaw is used when cutting trees, in repair work. The popularity of this tool is growing every year. Each owner buys it for his own house. However, in order to use it for a long time, it is necessary to properly care for the instrument. Only with good care will the saw serve a long life and will not harm your health..

This is especially true in a gasoline-oil mixture. It must be diluted and poured strictly according to the instructions that will be given below..

Overview of manufacturers of oils for internal combustion engines

Synthetic materials retain their lubricating qualities for a long time. With an increase in temperature, they are able to not burn out after the first heating. Do not emit toxic substances that can harm the health of the owner.

Husqvarna lubricant is used to lubricate engines of the same company chainsaws. It must be diluted in gasoline at a ratio of 1:50. Or 20 grams per liter of fuel. Lubrication of engines from manufacturers of another company must be diluted in a proportion equal to 1 to 33. That is, 30 grams per liter of gasoline. This component for fuel dilution consists of seventy percent mineral elements. Synthetic impurities have been added as well. But their share is a small part – 30 percent. This grease is intended for the CIS countries where there are problems with high-quality gasoline..

The Kreissman, an example of which was given above, is used for two-stroke chainsaw engines. It is necessary to dilute oil with fuel in the same proportions as indicated above. “Kreissman” prevents the formation of soot, perfectly lubricates pistons and other engine parts.

Tool manufacturers usually pack a chainsaw with their own lubrication material. This achieves the best ratio of lubricating properties and extends the service life of the saw..