Replace a fishing line for a trimmer on a Daewoo gasoline.

How to correct a fishing line for a trimmer to a trimmer coil for grass. step.by.step guides video

The first replacement of the fishing line in the coil will raise many questions. In fact, the process is quite simple. The main thing is to know the algorithm of action. Consider the example of the Fubag tool how to correctly refuel a fishing line for a trimmer to a trimmer for grass. For models of other manufacturers, the instruction will also be relevant.

For any electric or gasoline trimmer for grass, you can use fishing lines of different manufacturers. However, the best option is the consumable of the same brand as the tool. We recommend buying a trimmer fishing line for a trimmer here. It is believed that in this case it will benefit the durability of work and even reduce the consumption.

ВАЖНО ЗАПОМНИТЬ! Нельзя использовать для триммера для травы рыболовную леску для триммера или металлические тросики. Такая замена не эффективна и опасна. Трос может травмировать не только самого косильщика, но и окружающих.

As for the length, it is worth counting on the estimated frequency of using a trimmer for grass. The more often, the more it is worth stocking up.

Information about the possible diameter of the fishing line is found on the case Trimmer coils for grass. Most likely, the range will be indicated there. The thickness varies from 1.2 to 4 mm. Choose a suitable option, taking into account the features of the processed territory. The larger the diameter, the easier it is to mow hard grass.

replace, fishing, line, trimmer, daewoo, gasoline

Preparation. remove and disassemble the rogue

In most models of electroly and benzotrimmers, to replace the fishing line, you will need to remove the coil. FUBAG tool (electrimmers and benzoprimers) allows you to skip this stage. For the instruction to be universal, we will still consider it in detail:

one. Fix the shaft. Insert a stop element into the corresponding hole. They may be a thin screwdriver or a metal rod.

Unscrew the spool body. In our example. strictly in the direction clockwise.

Unscrew the lid in accordance with the direction indicated on the case.

The preparatory stage has been passed. You can go to the winding of the fishing line.

How to wind a fishing line for a trimmer to a coil of a trimmer for grass: Methods of winding and video

Any owner of a garden plot knows how quickly weeds can fill the territory. A trimmer for grass will help to win over them without excessive efforts. This is an incredibly useful device. an indispensable assistant in the ending and mowing of grass.

It’s no secret that an ordinary lawn mower can be used far from everywhere. Unlike it, the trimmer can process even very complex sections. This is especially true for those tools in which the knife does not act as a cutting element, but a fishing line for a trimmer.

Features of the use of trimmers

A trimmer for grass, mowing grass with a fishing line, can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, a row in a garden plot.

Such a convenient, and most importantly, effective device, like a trimmer for grass, exists in several variations:

As the names understands, the types of trimmer for grass are noticeably different from one another. But regardless of the type of this tool, its cutting element can be a fishing line for a trimmer. Of course, a trimmer tilted for the grass for a trimmer is not infinite. And sooner or later it will need to be replaced by a new.

Fishing consumption directly depends on the frequency of using the device and the scale of the work performed. The more herbs are brazen and the more often it is trimmed with a trimmer for grass, the more actively a fishing line for a trimmer is consumed in it. And, accordingly, the faster it will end. In this regard, the question arises: how to refuel a fishing line for a trimmer to a trimmer coil for grass?

Not everyone knows the answer to this question. But the winding of the fishing line on the coil plays an important role in the work of a trimmer for the grass. To make the device normally, it is very important to correctly wind a new fishing line for a trimmer to the reel. About how to change a fishing line for a trimmer on a trimmer, and will be discussed in this article.

Which line for a trimmer to choose

Before you stock up on this material for refueling in a trimmer for grass, you need to decide on the choice. After all, the usual so.called round fishing line for a trimmer is far from the only existing look. How to choose the most suitable? First you need to determine the working conditions.

Type choice. a line for a trimmer with a round section is the most common. It will suit any reels with the rarest exceptions. This type of consumable is suitable in order to mow fresh, juicy grass. But with the mowing of the so.called dryness, this kind may not cope anymore. It is pointless to mention attempts to mow shrubs and mention.

How to add fishing line

In addition to the usual type, there are others with sharp faces. Usually they are made by a “star” or “square”. The presence of sharp faces is the main feature and key difference between these threads.

It is thanks to this feature, the threads of such species are able to mow dry weeds. But the spicy threads are not devoid of disadvantages, the main of which can be called rapid wear and strength, markedly inferior to the round type.

In addition to the already mentioned types of forests, there are still interesting and often encountered varieties. Especially among them can be noted fishing lines, inside which a metal wire is stretched. Threads of this type are often used in tools working on gasoline and having an engine more powerful than one and a half horsepower.

Threads with a metal core come both with a round section and with sharp faces. Regardless of the type of cross section, such threads are the best suited to overcome hard.to.stop plants. Threads related to this type easily mow not only dry grass, but even small shrubs.

The threads with wire inside are favorably different from other types of consumables for their incredible wear resistance. But unfortunately, this feature has a more than noticeable effect on the price of this type. The cost of threads with a core significantly exceeds the cost of threads of other types.

Choice in thickness

In addition, special attention should be paid to the thickness of the consumption material. For mowing young grass, a thread is suitable with a diameter of one and a half millimeters. The larger the diameter of the thread, the more dry and rude weeds it can overpower.

When choosing a fishing line in thickness, there is one “but”. It is important not only to evaluate the capabilities of the material, but also to take into account the features of the trimmer for the grass. You must definitely look into the user’s management, which is attached to the tool, and find information about the requirements for the cutting element.

The use of inappropriate thread can lead to the failure of the tool. The use of too thick thread will entail the overload of the device engine. And the use of too thin thread will significantly increase the wear of the torque.

That is why it is necessary to approach the choice of consumables no less responsibly than to refuel in a trimmer for grass. When a suitable fishing line for a trimmer is found and purchased, you can begin to consider the ways to wind it on the coil.

How to wind a fishing line for a trimmer to a trimmer coil for grass

The refueling of the fishing line in the coil of the tool, at first glance, is not easy. But to carefully study this process carefully-and in the future all the necessary actions will be carried out without any difficulties.

To find out how to refuel a fishing line for a trimmer trimmer for grass, you should read this guide. The step.by.step instruction below takes into account the features of the coils of different types of trimmers, therefore it applies to any tool.

  • The reel with a fishing line is the lower edge of the trimmer for the grass. First, of course, it is necessary to remove this head from the device. To do this, fix the rod (or, in other words, the shaft) on which the coil is attached. Fix it in such a way that it does not scroll at. It is easiest to do this by placing a peculiar stupor between the thread of the shaft through a special hole (best metallic). When the shaft is fixed, you can unscrew the coil.
  • At this stage, it will be necessary to extract a bobbin from the head, on which a fishing line for a trimmer is attached. To do this, you need to disassemble the head to the elements. To do this, you must first find a fixer on its case. It is located on the circumference of the product and is the likeness of the buttons. When the lock is found, you need to press it with an effort. Holding the latch pressed, you need to turn the head cover clockwise. Then you need to remove the lid and remove the bobbin.
  • A tight spring is placed between the bobbin and the head. It must be set aside for a while so that it does not interfere with the winding process. Before proceeding to the winding of the fishing line, it is necessary to inspect the bobbin. If it has the remains of an old fishing line, they must be removed. When the bobbin is cleaned, you can start preparing a new skein.
  • From a pre.prepared skein of a new fishing line, it is necessary to measure and cut off six (maximum. seven) meters. Spulk should be at hand.

How to wind a fishing line for a trimmer to a trimmer coil for grass: Key points

Fishing lines is called consumable, which consists of nylon, and serves as a cutting device. Through this equipment, the grass grows, which is ensured due to rotation of the instrument head with a high frequency. This material has a different thickness, which depends on its use on the corresponding tools of low-power (from 1 to 1.6 mm), electric from 500 W (2-2.4 mm) and gasoline trimmers for grass with motorcycles (from 2.4 up to 3.2 mm).

The more powerful the tool, the accordingly there should be a cutting equipment. This affects not only the quality of the injection of grass, but also on the life of the material. If you ask the question of how to wind the coil of a trimmer for grass, then it’s time to change the reload of the tool. With the onset of spring, this issue is becoming more and more in demand, so it’s time to understand the step.by.step instructions for replacing the fishing line in the coil of the trimmer for grass.

Types of heads for trimmers

A trimmer is a tool that is used to combat vegetation in a summer cottage or household territory. Grassing and hay harvesting for cattle implies the use of benzo or motorcycle. The heads of different types are installed on trimmers for the grass, through which the grass and other vegetation occurs.

The heads are classified into three main types that differ not only in design, but even in price, the method of operation and service life. Consider all types of heads for trimmers, as well as their technical features.

How to remove a coil from a trimmer for grass and extract a fishing line for a trimmer

Initially, before filling the fishing line for the trimmer to the coil of the trimmer for the grass, it is necessary to extract it from there. Coil or tip is a device that is located inside the braid, bobbin or drum. The heads are of different types (depending on the manufacturers), however, the principle of replacing the fishing line on the coil has the same. First of all, we will figure out how to remove the head from the tool, as well as how to get a drum with a fishing line from it.

It is interesting!The replacement of equipment can be done directly on the tool, but if you do it for the first time, it is still recommended to remove the head, and study the detailed process of winding. After the technology is mastered, you can perform work on replacement on a trimmer of a motorcycle or a gas station. Instructions on how to promote a hand head on a trimmer, has the following look:

    Turn the instrument with the head to the top, and if necessary, cleanse it from pollution. Take two fingers of one hand by the cover of the cover (on the mowing head), which are located symmetrically to each other. After a light pressed inward, dismantle the protective cover from the drum

This process is not difficult, and as you know, it is not necessary to dismantle the entire head if you know how replacement is performed. When dismantling, consider the following nuances:

  • It is recommended to remove the head periodically to prevent the corrosion of the threaded connection. If you never unscrew the screw, then if necessary to do it will be difficult and even sometimes impossible
  • If the screw has a tetrahedral boring of the head, then for twisting you should select a screwdriver or bit of a suitable size to eliminate the licking of the faces on the head
  • When assembling the installation, a threaded seat should be treated with lubricants, for example, solidol or machine oil
  • If the edges on the screw are licked, then for its unscruptions you can use special clamping forceps
  • There are drums that do not require preliminary disassembly. To dismantle them, you should take up it, and rotate in the opposite direction of the direction of the clockwise

Knowing how to disassemble the drum, you should continue to clarify the process of replacing a trimmer fishing line for grass. Below the video shows a detailed process how to open a trimmer coil for grass and disassemble it.

Instructions

In order to change the fishing line for the trimmer, it is necessary to extract the old one (if it was).

The coil is part of the design of the trimmer for the grass, which is located inside the head of the motorcosa, drum or bobbin. Depending on the manufacturers of the head can be different. But this article discusses only Patriot, although their mechanism is used by many other companies.

How to wind a fishing line for a trimmer to a coil of a trimmer for grass: Methods of winding and video

Any owner of a garden plot knows how quickly weeds can fill the territory. A trimmer for grass will help to win over them without excessive efforts. This is an incredibly useful device. an indispensable assistant in the ending and mowing of grass.

It’s no secret that an ordinary lawn mower can be used far from everywhere. Unlike it, the trimmer can process even very complex sections. This is especially true for those tools in which the knife does not act as a cutting element, but a fishing line for a trimmer.

Features of the use of trimmers

A trimmer for grass, mowing grass with a fishing line, can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, a row in a garden plot.

Such a convenient, and most importantly, effective device, like a trimmer for grass, exists in several variations:

As the names understands, the types of trimmer for grass are noticeably different from one another. But regardless of the type of this tool, its cutting element can be a fishing line for a trimmer. Of course, a trimmer tilted for the grass for a trimmer is not infinite. And sooner or later it will need to be replaced by a new.

Fishing consumption directly depends on the frequency of using the device and the scale of the work performed. The more herbs are brazen and the more often it is trimmed with a trimmer for grass, the more actively a fishing line for a trimmer is consumed in it. And, accordingly, the faster it will end. In this regard, the question arises: how to refuel a fishing line for a trimmer to a trimmer coil for grass?

Not everyone knows the answer to this question. But the winding of the fishing line on the coil plays an important role in the work of a trimmer for the grass. To make the device normally, it is very important to correctly wind a new fishing line for a trimmer to a reel. About how to change a fishing line for a trimmer on a trimmer, and will be discussed in this article.

Which line for a trimmer to choose

Before you stock up on this material for refueling in a trimmer for grass, you need to decide on the choice. After all, the usual so.called round fishing line for a trimmer is far from the only existing look. How to choose the most suitable? First you need to determine the working conditions.

Type choice. a line for a trimmer with a round section is the most common. It will suit any reels with the rarest exceptions. This type of consumable is suitable in order to mow fresh, juicy grass. But with the mowing of the so.called dryness, this kind may not cope anymore. It is pointless to mention attempts to mow shrubs and mention.

In addition to the usual type, there are others with sharp faces. Usually they are made by a “star” or “square”. The presence of sharp faces is the main feature and key difference between these threads.

It is thanks to this feature, the threads of such species are able to mow dry weeds. But the spicy threads are not devoid of disadvantages, the main of which can be called rapid wear and strength, markedly inferior to the round type.

In addition to the already mentioned types of forests, there are still interesting and often encountered varieties. Especially among them can be noted fishing lines, inside which a metal wire is stretched. Threads of this type are often used in tools working on gasoline and having an engine more powerful than one and a half horsepower.

Threads with a metal core are both with a round section and with sharp faces. Regardless of the type of cross section, such threads are the best suited to overcome hard.to.stop plants. Threads related to this type easily mow not only dry grass, but even small shrubs.

The threads with wire inside are favorably different from other types of consumables for their incredible wear resistance. But unfortunately, this feature has a more than noticeable effect on the price of this type. The cost of threads with a core significantly exceeds the cost of threads of other types.

Choice in thickness

In addition, special attention should be paid to the thickness of the consumption material. For mowing young grass, a thread is suitable with a diameter of one and a half millimeters. The larger the diameter of the thread, the more dry and rude weeds it can overpower.

When choosing a fishing line in thickness, there is one “but”. It is important not only to evaluate the capabilities of the material, but also to take into account the features of the trimmer for the grass. You must definitely look into the user’s management, which is attached to the tool, and find information about the requirements for the cutting element.

The use of inappropriate thread can lead to the failure of the tool. The use of too thick thread will entail the overload of the device engine. And the use of too thin thread will significantly increase the wear of the torque.

That is why it is necessary to approach the choice of consumables no less responsibly than to refuel in a trimmer for grass. When a suitable fishing line for a trimmer is found and purchased, you can begin to consider the ways to wind it on the coil.

How to wind a fishing line for a trimmer to a trimmer coil for grass

The refueling of the fishing line in the coil of the tool, at first glance, is not easy. But to carefully study this process carefully-and in the future all the necessary actions will be carried out without any difficulties.

To find out how to refuel a fishing line for a trimmer trimmer for grass, you should read this guide. The step.by.step instruction below takes into account the features of the coils of different types of trimmers, therefore it applies to any tool.

  • The reel with a fishing line is the lower edge of the trimmer for the grass. First, of course, it is necessary to remove this head from the device. To do this, fix the rod (or, in other words, the shaft) on which the coil is attached. Fix it in such a way that it does not scroll at. This is the easiest to do this by placing a peculiar stupor between the thread of the shaft through a special hole (best metallic). When the shaft is fixed, you can unscrew the coil.
  • At this stage, it will be necessary to extract a bobbin from the head, on which a fishing line for a trimmer is attached. To do this, you need to disassemble the head to the elements. To do this, you must first find a fixer on its case. It is located on the circumference of the product and is the likeness of the buttons. When the lock is found, you need to press it with an effort. Holding the latch pressed, you need to turn the head cover clockwise. Then you need to remove the lid and remove the bobbin.
  • A tight spring is placed between the bobbin and the head. It must be set aside for a while so that it does not interfere with the winding process. Before proceeding to the winding of the fishing line, it is necessary to inspect the bobbin. If it has the remains of an old fishing line, they must be removed. When the bobbin is cleaned, you can start preparing a new skein.
  • From a pre.prepared skein of a new fishing line, it is necessary to measure and cut off six (maximum. seven) meters. Spulk should be at hand.

Instructions

In order to change the fishing line for the trimmer, it is necessary to extract the old one (if it was).

The coil is part of the design of the trimmer for the grass, which is located inside the head of the motorcosa, drum or bobbin. Depending on the manufacturers of the head can be different. But this article discusses only Patriot, although their mechanism is used by many other companies.

Now you need to understand how to properly remove the head from a trimmer for grass and how to get a drum out of it.

Instructions on how to promote a hand head on a trimmer is described below.

  • First of all, you need to clean the head of dirt and adhering grass if it is contaminated. To do this, you need to raise a motorcycle head up and, holding the casing, remove a special protective cover dressed on the drum.
  • The next step needs to remove the reel from the drum. The coil is easily removed even with one hand, because it is not fixed inside the drum.
  • The drum itself is fixed in the trimmer with a bolt. This bolt must be unscrewed, after which you can easily pull out the drum. To do this carefully, you should support the drum with a coil, while twist the screw counterclockwise.
  • Now you can pull the coil out. As mentioned above, it is not fixed in anything except a hook with a metal shaft, so it does not need to be torn off with force. Neatly, in a circular movement you should pull the coil from the drum.
  • Now it remains to extract an old fishing line for a trimmer and follow the following instructions.

Installation of the coil and drum in its former place is performed according to the opposite algorithm.

Before the process of refueling the fishing line, it is worth making sure that the thread suitable for a trimmer was bought. In the case when the thread is not suitable, the fuel or energy consumption increases, as well as the load on the motor motor.

In order to replace the thread itself directly, you need to prepare a piece of thread of the required size. Most often, this requires about 4 m fishing line. A specific figure will depend on the parameters of the thread, for example, its thickness, as well as on the parameters of the coil itself. If it is not possible to accurately determine the length, it can be done as follows: insert and wind the thread to such a state that the coil is completely charged (the level of the fishing line will be compared with protrusions in the sides of the coil). It is necessary to ensure that the fishing line for the trimmer sits in the coil exactly.

Do not forget that the thick thread will be shorter than thin.

The instructions for refueling the fishing line in the coil is described below.

  • The prepared thread must be taken and turned in half. It should be ensured that one edge is longer than the other by 0.1-0.15 m.
  • Now you need to take the ends in different hands. The one that is smaller must be pulled to more, so that it becomes 2 times shorter. When bending, the indentation should be maintained at 0.15m.
  • Find the slot inside the coil partition. Carefully prick the loop that turned out earlier in this slot.
  • To continue work, it is necessary to determine the direction of winding the thread in the coil. To do this, just examine the coil. there should be an arrow on it.
  • If the gunner could not be found, it is quite possible that there is a written designation. An example is given in the photo below. It is necessary to inspect the head of the coil. It has a direction indicator. However, this is the direction of the coil movement. To get the direction of winding, you need to wind in the opposite direction.
  • Now you need to season the reel with a fishing line. It is worth noting that there are special guide grooves inside the coil. When wrapping a thread, you need to follow these grooves, otherwise you can damage a trimmer for grass. At this stage, you need to charge the coil very carefully.
  • When the user winds up almost the entire thread, you should take the short end (do not forget about the protrusion of 0.15m) and stretch it into the hole located in the coil wall. Now you need to repeat this action similarly with another end (on the other hand).
  • Put the coil itself in the coil head, before that, extinguishing a fishing line for a trimmer through the holes inside the drum.
  • Now is the time to return the drum to your place. After that, you need to take with both hands by the ends of the fishing line and pull them to the sides. Then you need to put the lid in place (here you can safely make efforts until a characteristic click is heard).
  • Remained to perform “cosmetic work”. You need to see if the thread has come out too long. You can start a trimmer for the grass and check in practice whether everything is comfortable. If the thread came out a little long, you can cut it with scissors.

How the head with a fishing line on a motorcycle works why you need to know the principle of work

Depending on the manufacturer, the heads differ structurally not only externally, but also inside. Most drums have a clamping spring inside (semi.automatic and automatic). The instruction is presented above how to disassemble the head of the trimmer for grass without a spring, t.e. on a manual.type head. The principle of dismantling a semi.automatic head with a spring inside almost identical above described instructions.

The principle of operation of the semi.automatic coil of the trimmer for the grass is as follows:

  • Inside the head is a coil, which is planted on slots that prevent its free movement
  • The coil is affected by a spring that presses it to the slots located in the design of the lid
  • A fishing line for a trimmer is wound for a tip, the length of which depends on the tool itself. Usually this length is from 1 to 4 meters
  • During the work, if it is necessary to increase the length of the fishing line, the protruding part of the drum occurs, through which it comes out of the hook with the slots. In this case, the fishing line for the trimmer is wound from the drum, increasing in the length
  • Having released the required amount of fishing line, you should release the pressing, and continue to perform work on the injection of the grass

The advantage of the tool with a fishing line is that this consumable does not require sharpening compared to metal disks. In addition, if a stone or tree comes across the way, then the fishing line for a trimmer simply breaks off, without having a negative effect on the gearbox and the engine engine, as is the case with metal cutting discs.

Knowing the design and device of the types of mowing or trimmer heads, it is necessary to proceed to the consideration of the process of refueling the fishing line into the coil of the trimmer for the grass. After all, it is precisely this moment that most owners of the Special Instruction causes difficulties.

The choice of fishing line

In order for the dressing of the fishing line to the trimmer head to be successful, it is important not to fail to choose the consumer material. The thicker the cord you refuel, the more thick and hard grass it can cut. A universal fishing line for a trimmer is often used, the diameter of which is 2 mm. You can choose the diameter suitable for the mower in the following ways:

  • See the information about the thickness of the fishing line in the instructions attached to the trimmer.
  • Pay attention to the squash itself. Sometimes information is applied on it about possible fishing line diameters.
  • Another option is to try to insert the cord into the output. If it easily passes into it, then the selected fishing diameter is suitable for use.

You can choose a cord thread by type of engine. If the fishing line for the trimmer is too thick, then the resistance to rotation will increase. the engine in this case will overheat and will soon fail. Useful recommendations:

  • For an electric device with an engine of less than 500 in, a thread of 1.3 mm thick is suitable. If this was not found, then you can use a fishing line for a trimmer by 1.6 mm. If the power is more than 1 kW, then select a cord with a diameter of 2 mm.
  • The gasoline trimmer for grass has a shaft mower. For the bent version, the cord for 2 mm is often used. If the shaft is straight, then set the thread 2.4–2.5 or 3 mm. The thickest fishing line for a trimmer is installed on powerful devices. from 1.3 kW.

Pay attention to the type of cross section of the cordry thread. Some popular options:

replace, fishing, line, trimmer, daewoo, gasoline
  • The most common fishing lines with a round section. They mow fresh herbs well, but they cope worse with shrubs, drows.
  • Twisted (spiral) cord does not differ in high strength, but well suitable for thin young grass.
  • The jagged thread with sharp edges is ideal for a large weeds in a neglected area.
  • You can mow the lawn in a rectangular, starry or square fishing line for a trimmer for grass, but they are not very durable.
  • The most durable is a two.component cord with an internal core and a round section.

Keep in mind that it is impossible to use wire, metal strings and cables, as well as an ordinary fishing thread. The device will be dangerous for both the user and for others. So the cable or similar products will gradually begin to shut down, as a result, their ends will be reacted, and small pieces will scatter at high speed.

Removing and disassembling the coil

The braid trimmer head consists of a casing, a spring (not in every model), bobbins with a cord, cover. Before proceeding to disassemble the coil of the electric unit, be sure to turn off the trimmer for the grass from the network. The disassembly method depends on the mounting of the mowing head. First option:

  • To remove the lid covering the inside of the head, click on the latches (latches), which are located on its two sides.
  • Remove the lid under which you will see the spool. remove it from the body. Some trimmers have a spring under the bobbin coils, which should also be carefully pulled out.
  • Removing the bobbin, you will see the screw in the center of the case. Unscrew it with a screwdriver.
  • After extracting the fasteners, take the case body and, shaking it in different directions, remove the gearbox from the shaft.

In the second version, the head of the trimmer for the grass is twisted onto the shaft of the gearbox. To remove it, you need to fix the shaft. To do this, in such devices there is a hole through which a thin screwdriver or metal rod is inserted. Brief Instruction:

  • Insert a screwdriver into a special hole, then stall the shaft.
  • Get the body of the head and start twist it. This should be done clockwise, t. to. Larva shaft thread.

We carry out the winding of the fishing line

Sentlessly completed disassembly of a spray coil without losing its spare parts allows you to go to the main task-winding into a fishing line coil. Technological features of the design of the spool and the number of working antennae determine the sequence of actions.

Coil with one working osik

The easiest option and a simple sequence of actions:

  • The dimensions of the bobbin and the length of the original factory winding determine the length of the fishing line recommended for winding. 2 5 m.
  • One end of the fishing line is inserted into the fixing technological hole located inside the spool.
  • The fishing line for the trimmer is wound on the drum in reverse rotation of the spray in the trimmer product direction. as a rule, on the inside of the bobin, the arrow indicates which direction the winding is carried out.
  • A small section of the fishing line is left free to output it. it is fixed in a specialized border on the inside of the bobbin, designed to keep the winding when assembling a spool in working condition.
  • The left end of the fishing line is passed through the hole of the outer part of the bobbin.
  • Half of the bobbin are collected and put on the bar of the trimmer device.

Two working antennae

In this type of spools, the number of grooves for winding the fishing line lying on the inside of the coil should be determined:

For both cases, a fishing line for a trimmer 2-3 m long is taken. In a single.captable coils, the fishing line for a trimmer stretches into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the back of the rotation of the bobbin on the bar the side. inside the arrow is usually indicated the correct direction of the winding. In the presence of fixing grooves, the ends of the fishing line are threaded in them or hold their free arm fingers, spread into the through hole of the outer half of the bobin, the spool is closed and attached to the bar of the trimmer product.

The difference between the winding of the fishing line in the two-to-dancing coils is that initially a line of fishing line 2-5 m long is folded in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves. Both strains of the fishing line are wound each in its own groove, fixing the antennae and assembly of the coil is similar to the option considered above with one groove.

The first implementation of this procedure may seem long and quite time.consuming, but over time and experience, this task will be solved much faster and easier.

The video below will clearly show how to refuel a fishing line for a trimmer to the coil of a trimmer for the grass and correct it correctly. this operation is not a complicated one and, with some patience, will necessarily be crowned with success:

After the cutting thread as a result of the work is worn out, turn off the braid and remove the lid on the mowing head. Pull out from the slot of the forest, stretching it to the desired length, and insert it again in the slot. The amount of material wound on the coil is enough for 5-10 cycles of work depending on the model of the device. When you install the lid in place, carefully look at whether the grooves were clogged where the latches are inserted, if they are clogged, then carefully clean them.

When the fishing line for the trimmer is worn out, you need to disassemble the braid head again, pull out the coil and wind up the work fishing line for the trimmer again.

Trimmer for grass is the most common unit used to cut grass and cut small shrubs. This device is distinguished by its simplicity in maintenance, simple management during operation, and even women cope with it even a small weight. It is no secret that for the high.quality performance of herbal mowing work, the correct selection of a cutting tool is required. As the latter in trimmers, special cutting nozzles (wheels, knives) or trimmer heads with fishing line inside are used. Nozzles and a fishing line for a trimmer are a consumable tool, but if the knives can be sharpened, then when spending the fishing line you need to replace it. In this article, we will tell you in the most detail how to correctly replace the fishing line for the trimmer.

Field winding algorithm

Depending on which model of the trimmer for grass is used, the type, thickness and length of the fishing line is selected. The diameter of the cord can be from 1.2 to 4 mm. It is not difficult to guess that the thicker you will refuel the cord, the more rigid and thick grass it is able to cut off.

In most cases, a universal fishing line for a trimmer with a diameter of 2 mm is used.

In order to find out which line diameter can be used on your mower, there are 3 ways.

  • View information about the thickness of the cord in the instructions for the apparatus.
  • Look at the squash itself. It can be given information about possible fishing line diameters.

The fishing line for a trimmer is wound on a coil in a mowing head. Therefore, first it needs to be opened (this was mentioned above). There are 2 methods of winding the cord.

The first way

To correctly determine how many meters of the fishing line are required for a specific coil, it is necessary to wind it on the bobbin so that the skein does not exceed the diameter of the sides. If the fishing line for the trimmer will look out beyond the edges of the coil, you cannot insert it into the casing. After you have decided on the length of the material, it must be tucked in a bastard, so do the following.

  • It is necessary to fold the fishing line for double so that one end is 10-15 cm longer from the other.
  • Please note that the bobbin is divided into 2 parts by the central side, from which charging begins. Find a groove on it and insert a cord into it, bent twice, putting a slight effort.

The second method

Some coils provide a second method of fixing the cord: you can charge 2 sections of the thread, instead of one folded in half. Fishing line replacement occurs according to the following algorithm.

  • Before changing or charging a new thread to the coil, determine how many meters it will be required by the way discussed above.
  • Bend one end of the cord in the form of a hook.

There is a very simple and quick way to replace the fishing line for motor.cuts without disassembling the mowing head, which you can see this video.

The ends of the cord sticking out of the holes in the casing can be cut to the required length, already when the part is installed in the trimmer. You can do this in two ways:

  • By turning on the trimmer for the grass (when rotating, the ends of the fishing line will part on the knife, fixed for these purposes on the protective casing);
  • Cutting the extra ends with scissors so that they do not touch the casing body.

The second method is used if I had to put a large diameter cord, and a trimmed knife cannot shorten it.

If the thread was charged into a mowing head, but the length of the protruding ends of the cord is insufficient, then before starting the device they must be lengthened. this applies to the head with manual adjustment. However, there are cases when using a semi-automatic mowing head, when, due to the insufficient length of the protruding ends of the cord, they do not automatically lengthen. In this case, it is necessary to turn off the unit (on the electric device you need to pull the fork out of the outlet), manually press the button located at the bottom of the part, and stretch a little fishing line. After this procedure, the cord will be able to advance again thanks to centrifugal strength, if you put the maximum spindle speed.

No matter how thick the fishing line for the trimmer you should remember: in order not to constantly interrupt the work and do not change the cord, you should avoid areas where a working tool can touch hard surfaces (stones, borders, thick dry branches, etc.D.).

How to remove a coil from a trimmer for grass and extract a fishing line for a trimmer

Initially, before filling the fishing line for the trimmer to the coil of the trimmer for the grass, it is necessary to extract it from there. Coil or tip is a device that is located inside the braid, bobbin or drum. The heads are of different types (depending on the manufacturers), however, the principle of replacing the fishing line on the coil has the same. First of all, we will figure out how to remove the head from the tool, as well as how to get a drum with a fishing line from it.

It is interesting!The replacement of equipment can be done directly on the tool, but if you do it for the first time, it is still recommended to remove the head, and study the detailed process of winding. After the technology is mastered, you can perform work on replacement on a trimmer of a motorcycle or a gas station.

Instructions on how to promote a hand head on a trimmer, has the following look:

This process is not difficult, and as you know, it is not necessary to dismantle the entire head if you know how replacement is performed. When dismantling, consider the following nuances:

  • It is recommended to remove the head periodically to prevent the corrosion of the threaded connection. If you never unscrew the screw, then if necessary to do it will be difficult and even sometimes impossible
  • If the screw has a tetrahedral boring of the head, then for twisting you should select a screwdriver or bit of a suitable size to eliminate the licking of the faces on the head
  • When assembling the installation, a threaded seat should be treated with lubricants, for example, solidol or machine oil
  • If the edges on the screw are licked, then for its unscruptions you can use special clamping forceps
  • There are drums that do not require preliminary disassembly. To dismantle them, you should take up it, and rotate in the opposite direction of the direction of the clockwise

Knowing how to disassemble the drum, you should continue to clarify the process of replacing a trimmer fishing line for grass. Below the video shows a detailed process how to open a trimmer coil for grass and disassemble it.

How to change a fishing line for a trimmer on a lawn mower: detailed instructions

In 1971, American entrepreneur George Bollas invented a mower for grass, where a fishing line for a trimmer played the role of a cutting knife. A lot of time has passed since then, the drive has become more powerful, a modern trimmer can easily damage the bark, so that the idea itself was transformed into mowing around obstacles without damage to the very cutting apparatus of a mowing room. For a neat mowing around obstacles, you can have a head with a smaller fishing line, it is easy to change it when moving from mowing large areas to delicate blocking. However, periodically and the cutting tool itself requires replacement. We tell you how to disassemble the head of the lawn mower (trimmer for grass) and wind a new fishing line for a trimmer.

All about the replacement of fishing line with a trimmer head

There are many types of heads that are designed for different types of fishing line. The latter is also available in several diameters: from 1.0 mm to 3.2 mm. At the same time, its section is round (including with a special groove to reduce noise), square, twisted and in the shape of a star.

There are no clear preferences, and this explains the wide variety of forms and diameters in the market. The round shape is usually stronger, but has a worst cutting ability, in addition, when rotation, it makes a characteristic sound. Therefore, sometimes they make an acoustic groove, however, the use of this fishing line makes sense only on battery trimmers, in machines with gasoline and network drive, the sound level of the drive itself practically drowses the sound from the fishing line. The square has a good cutting ability, and despite the fact that such a fishing line for a trimmer is less durable than round, on average it is consumed less. A square fishing line for a trimmer quite easily cuts the shoots of the same Ivnyak up to 1 cm in diameter. The star has the maximum number of cutting faces, mows best and is the fastest consumed.

The next nuance when choosing is stiffness. The fact is that in the production of nylon, a modifier (often maleine anhydride) is added to it, which improves its strength and prevents gaps. However, modifiers are not the cheapest component, they are trying to save on it. Therefore, it seems to be a good fishing line for a trimmer that remained for the winter, in the spring suddenly behaves completely differently. it breaks, stops doing normally from the reel. There is a recommendation to soak a fishing line for a trimmer in the water before work, but I do not see much sense in this, malein anhydride interacts with water, but if it is not enough in the nylon, then there will be nothing to interact. Therefore, it makes no sense to stock up on fishing line for a long period of time, a breakdown or constantly torn fishing line for a trimmer, which also does not want to leave the reel itself, can significantly complicate the work.

How to wind a fishing line for a trimmer to a trimmer coil for grass

Winding algorithm

Lay the fishing line for the trimmer in accordance with the indicated direction on the element case.

Insert the short end into the groove on the side of the coil.

Fasten the long end in the opposite groove.

Place the coil with a wound fishing line in the spray building.

Cut the ends of the fishing line, leaving 10 to 15 centimeters.

The replacement of the fishing line is completed and now it remains only to fasten the bobbin on the trimmer for the grass and you can work.

ATTENTION! Typical problems with fishing line

No wonder they say: “”Forewarned is forearmed“”. Knowing the possible problems and causes of occurrence, one can prevent them in a timely manner. We recommend remembering or leaving a memo.

Problem Cause Solution
Crack by fishing line Stones, branches and hard objects in the grass Avoid the collision
Low quality of the cord Replace with a quality analogue
Example of the output holes in the head A complete replacement of the part is required
The fishing line for the trimmer is unwound Weakened the spring in the coil Check the spring and replace in case of damage
Trimmer fishing line sticks together Low quality of the fishing line, due to which it can melt under the influence of the temperature from the heated head Wrap less fishing line or replace with better consumption

For a better understanding of the mechanism of the process of replacing fishing line in a spool with video assistance prepared by Fubag specialists:

There was a gentleman’s set in the box: shoulder belt, instructions, keys set, knife, fishing line, warranty ticket. Of the weekend, it is clear: South Korean brand, Chinese assembly.Men examined the purchase, approved, brought a trimmer for the grass to combat readiness. Mom put on glasses, belt on her shoulder. and in the garden!Well, as a result, my mother shaved 5 minutes with her own trimmer and calmed down, and gave a solemnly new gadget to his uncle, and he now mows where his mother will indicate. And mom walks for his uncle and worries that he does not accidentally mowed the wire with a fellow scope (once).

I also tested the new electric costs, it was interesting to compare with my usual trimmer (Carver TR-1500S/BH) link to the review what my impressions? Mom Daewoo is harder for the rise, it is less convenient to hold (there are no bicycle handles), but it mows perfectly, more powerful, indeed, the “Start” button convenient. Noise level (for observers) is the same, average, quite acceptable. But this trimmer is not for me for the grass. This is a tool for men. Glating Daewoo, I had the impression that I waved a working motorcycle.

Uncle mowed them all summer and small grass and tall at the end of the site, and it was not even necessary to change the fishing line for the trimmer to the knife. Where I had its Carver to cut high grass in several tricks, first the top, then the middle, then to the state of the rug, then Daewoo often cuts off the high grass at a time and with such force and rage blushes it on the sides that the grass does not have time wrap up with a reel, in short “not leaks”.After 20-30 minutes of work, the trimmer needs to cool and rest. Well, after such a time, usually the owner of a trimmer for grass needs time to cool and relax, so complete harmony and mutual understanding.Here in the photo, both trimmers for the grass are resting together after work.

Now we are waiting for the whole family: a new summer season would begin as soon as possible. And nightingales, and mosquitoes, and mow, mow, mow.

Having your own economy, or living in your own house, it is often just necessary to have a trimmer for grass electric or gasoline, for haircuts of grass, bushes, and other vegetation. And such a consumable material as a fishing line for a trimmer, in a trimmer head can end at the most inopportune moment of work on haircuts of grass. Therefore, for a simple replacement of fishing line, without searching for operating instructions on the Internet or boxes from a trimmer for grass somewhere in the garage, with this article. If you want to know how to change a fishing line for a trimmer on a trimmer? Read on.

To carry out work to replace the fishing line, you will need several tools:

Manufacturers of garden trimmers usually recommend using certain types of fishing line in their models, and also advise to choose the right thickness of the diameter. It usually varies from 1 to 4 mm. Therefore, you need to consult with a specialist, or see the parameters of the cord you need. Depending on the type of grass that you are going to mow, it is worth using different thicknesses of the cutting thread. And this is the first important parameter. The softer and younger the grass, the thinner the cutting material can be. over, it is worth considering the features of your trimmer for grass, because many models do not allow you to insert a cord thicker than 3mm.

The second important parameter. This is a cross.section of the fishing line. For example, a twisted cord. is the softest and suitable for thin and young grass. While round. This is the most persistent look, and is suitable even for wild weeds.

The third parameter. The length of the winding. If you use a trimmer for grass for the garden, or for cutting grass along the path on the estate, then you should not buy a fishing line of 500 meters long, because there is a chance not to use it.

For refueling the cutting material to the head, usually there is enough segment of 2-3 meters. You do not need to use large segments, in view of the difficulties of moving and pulling the cutting rod.

How to Replace the Fuel Line in a Line Trimmer

To install the cord on a trimmer for grass, you will have to remove the head from the device. This is usually done very simply: unscrewing a special latch, or by elimination of special holders. We recommend using gloves to fix the moving parts more reliably, and exclude their slippage.