The electric screwdriver Metabo PowerMax Bs Basic smokes. TOP-5 professional batteries…

TOP-11 rating Metabo screwdrivers 2022: Review of the best battery and network models

Do I need an electric screwdriver in the house? Is it possible to do with ordinary tools? You will find answers to these and other questions in our article.

The days have gone when repairing tasks with threaded joints and fasteners of the master solved with the help of a heap of wrench and screwdrivers.

These usual tools use us now, but much less often, because they were replaced by screwdrivers: simple, but reliable mechanisms whose spectrum of action includes a dozen different operations.

What features of screwdrivers to pay attention to when choosing?

Before you go to the store, consider: why specifically do you need this device?

Note! Such planning will help to spend money really and choose the most useful model in everyday life.

  • nutrition elements (type and characteristic);
  • The quality of the electric screwdriver.This includes the mechanism of revolutions and the capabilities of the electric drive. An obsolete system with a collector of brushes is reliable, but heating the drive greatly. Plus there is a risk of sprinkling brushes. Brighting modern models and performance increase, and the risk of shock is reduced to naught. The optimal material of the gearbox is metal. He is wear.resistant and durable. The speed of rotation is indicated in the passport, which is invested in the box with the device. For operations with wood and metal, it will be enough 1200 ÷ 1500 revolutions per minute. Speed ​​higher is needed in a professional tool. The greatest torque is also important. To perform uncomplicated operations such as drilling thin boards, you need a force of 25 or more Nm, for metal. 36 nm and above. The ability to adjust the moment of tightening can always be (in all devices this function is). It looks like a ring with a special scale drawn on it: the ring moves, the value is selected from the largest to the smallest. The switch is placed directly under the trigger (in miniature models it is allowed to put not one, but two buttons: for rotation of direct and for rotation in the opposite direction). At the moment when the system recognizes too much effort, it will allow you to work slipping a clutch or ratchet, due to which the torque will stall at the same second.
  • Type of cartridge.For almost all modern models, fast-and-and-in-law cartridges are installed- one- and two-lump. One.way allows you to play it with one hand, in a two.tick when removing and installing you need a second.
electric, screwdriver, metabo, powermax

Be sure to specify: is it installed on the model that you like, the spindle braking function.

Do not take an electric screwdriver without such an option: in your work it will be very inconvenient for you.

  • Is there a shock force on the cartridge of the device?This pleasant addition will help make holes in several building materials at once.
  • Is there an impulse mode of operation?Also a useful function: then your mechanism will be “on the shoulder” of threaded joints acidified from old age, and it will also be possible to accurately note the place of entrance to the drill into the sheet.
  • Built.in flashlight for lighting the place of work is very convenient. But here you need to choose a model in which the LEDs are not placed under the cartridge (otherwise it will close the light), but in the lower part of the device handle.
electric, screwdriver, metabo, powermax

If you work a lot on top, choose a compact and light tool for yourself.

However, in some drilling operations, the severity needs precisely: take into account this too.

The domestic brands “Zubr”, “Caliber”, “Interskol” have proven themselves: not the most ultramodern, agree, but reliable, affordable at and with affordable service.

From foreign ones, “Hilti” and “AEG” (functional, but expensive), “Metabo” and “Dewalt” (“Black” electronics), Bosch and Makita (high.quality and reliable devices are sales leaders), Skil are distinguished. “,” Sparky “,” Hitachi “.

Batabo-Electric screwdriver Metabo PowerMax Bs Basic. reviews

This drill-electrical screwdriver purchased a construction yard in the store in July 2020, when there was a need to speed up the bank of the bathhouse. Electric screwdriver packed in a box. The electrical screwdriver, 2A batteries, instructions and warranty coupon includes.

Metabo PowerMaxx BS / #ПРОДОЛЖИТЕЛЬНОСТЬ РАБОТЫ

The baby who overshadowed his more eminent and older brothers in functionality, speed and quality. Drill-electrical screwdriver Metabo Powermax BSLC40. Our assistant in a private house.

Hi all. My family and I live in our private house, which, a priori, implies constant current repairs of straight hands, to maintain its functionality and a worthy living.

Hello! I want to share with you my impression on the battery electrical screwdriver from Dewalt.Electric screwdriver is quite compact, convenient, although you can’t call it easy.

Metabo Powermaxx BS Basic 10,8v

The main convenience of any battery tools. The absence of a “tail” in the form of a network cord, which has to be dragged behind it, follow it (whether you have caught it, whether you can cut it off if it is stopped to work, if its length is enough, as it adapted in uncomfortable places) and immediately you can choose.

Stanley Fatmax FMC626C2S 07B91 in each family should be a man, and therefore a tool!) This screwdriver may be so deservedly!) I like that there are a lot of speeds, a flashlight for backlight, rubberized, which gives reliability.

My first battery electric screwdriver caliber 5182 did not live long. Although it may be 2 years for an electric screwdriver for 2000 not so little. This tool has both their advantages and their shortcomings. I’ll tell you about everything in order. First, what pleased me. This is the presence of a plastic case.

Dewalt DCD 791 1b090 acquired this screwdriver as an assistant in production more than a year ago. I searched for a long time, chose, in the end I stopped on this model.

Good day to all readers Irek! Today I want to show and talk about such an electric screwdriver as Felisatti Da-12ER. Despite the sort of Italian names of the brand, this brand does not apply to Italia. At first, Interskol became the Felisatti distributor, then it seems like I bought it.

Review of the Metabo Powermax BS battery

Metabo Ultra-M technology provides optimal coordination and excellent communication between the machine engine, battery block and charger. Advantages: effective and careful charging, optimal use of energy and the longest possible service life. This guarantees you the corresponding tool and engine for each areas of application.

Charger LC 40, 10.8 V

No self.discharge during storage. The charged battery is ready to work even after a week of downtime. There is no decrease in the container from the partial charge. Do not have to wait for complete charging if the screwdriver needs only a couple of minutes. Ultra-M technology provides quick charging and increases the durability of the battery. 3 years of guarantees are given on the battery.

The base will inform the LED on the full charge of the battery. The moment of end of charging is easily tracked.

Drill-electrical screwdriver Metabo PowerMax Bs Basic X2 (600080500)

Register on the site and receive special from the first purchase!

This product is delivered by prepaid.

Metabo PowerMax BS X2 is a compact battery drill for drilling wood, metal, plastic and ceramics, as well as working with screws, self-tapping screws and other fasteners. Maximum torque. 34 nm. Works from lithium-ion battery 12 in.

  • Makes holes up to 10 mm in diameter in metal and up to 22 mm. In a tree.
  • Two batteries included. Do not have to interrupt work for recharging. just change the battery to a charged.
  • Warranty 36 months.

reasons to buy

  • No self.discharge during storage. The charged battery is ready to work even after a week of downtime.
  • There is no decrease in the container from the partial charge. Do not have to wait for complete charging if the screwdriver needs only a couple of minutes.
  • Ultra-M technology provides quick charging and increases the durability of the battery. 3 years of guarantees are given on the battery.
  • The base will inform the LED on the full charge of the battery. The moment of end of charging is easily tracked.
  • The screwdriver has two speeds. up to 360 rpm and up to 1400 rpm. The first speed is optimal for fasteners, the second. for drilling.
  • Twisting is tuned in a 20-speed regulator at the cartridge. The denser the material, the higher the torque.

Exploitation

Standard two main rules for working with screwdrivers.

  • The operating mode of the tool must correspond to the set goal. If drilling is supposed, then you should switch to the 2nd speed with a mandatory rotation of the fragmentation ring into the drill mode. Otherwise, critical overheating and engine breakdown is possible.
  • When working with self-tapping screws/bolts/nuts, the 1st speed should be selected, and in order not to disrupt the hats of screws or bolts, the torque ring must be transferred to a position that corresponds to the length/thickness of the fasteners and the density of the material (selected experimentally).

Cartridge, engine and battery. three main units requiring attention and care. The cartridge must be regularly cleaned of pollution. It is impossible to store an electric screwdriver in a humid and/or unheated room, during storage it is advisable to transfer the reverse switch into a neutral (middle, stop) position. Regular recharging of both batteries is also recommended.

Electric screwdriver: torque. The test, to which the electric screwdriver has opposed

Twisting the moment is the power with which the spindle with the cartridge rotates. The torque we measure at the simple stand (its detailed description is given here).

The electrical screwdriver in question is equipped with an effort sensor. This system turns off the engine power after a second or two after blocking. Sometimes screwdrivers with a different character are found, when the engine is turned off almost instantly when overloading, which does not allow me to measure the torque. To trouble, the electric screwdriver in question was precisely with such a disposition, extremely impatient. He withstands the overload no longer than one second. Or even less. In this connection, it becomes almost impossible to measure real torque. The maximum value that was fixed in this second was 10.1 N m. By the way, exactly the same situation arose when testing the BlackDecker BL186K1B2 electrical screwdriver electric screwdriver.

However, the manufacturer indicates the value of the torque equal to 38 N m. Almost all brands exaggerate, do not be surprised. Just everyone measures in their own way, that’s the whole secret.

What to do? It feels like the torque of our electric screwdriver is still more than the measured. But is also definitely less than the manufacturer. Based on the experience of communication with different screwdrivers, we can name the approximate meaning: about 20 N m.

But you can’t bring the sensations in the table. I think there are no other options, except to put a gap. However, our modest stand actually imitates real work with an electric screwdriver. Judge for yourself: if the tool is turned off less than a second after the spindle is stalled. this means that you cannot turn the particularly stubborn self.tapping screw or you will not be able to convert the moody/metal/metal. By the way, we have repeatedly encountered the engine during operation with this electric screwdriver. Especially often, the disconnection occurred precisely during the drilling of unbearable thick wood. Here they are, these steps of a 5-centimeter thickness in which the drill simply gets stuck, and the engine of an electric screwdriver turns off.

The next plate shows the twisting moments of different screwdrivers that have passed through our stand. The tested screwdrivers are sorted by the dates of publication of reviews (above. earlier, lower. later), and the name of the model is a link to the published review of this tool.

Model kr. Passport moment, n m kr. moment measured, n m discrepancy, since
DEKO GCD12DU3 32 7 4.6
Kolner KCD 12M fourteen 7 2.0
Zitrek Green 12 32 four 8.0
Bosch IXO 4.5 3.5 1.3
Stanley SBD201M2K 55 55 1.0
Tonfon 12V 25 12.5 2.0
Worx Aidrill WX178 twenty 8.3 2.4
BlackDecker BL186K1B2 52
Metabo Powermax Bs Basic 34 19.5 1.7
Metabo PowerMaxx BS BL 38

Electric screwdriver makes it possible to adjust the force in the range from 1 to 20 conditional divisions of the adjusting coupling. During operation by an electric screwdriver, we most often used the value of force close to the maximum-approximately 15-18 conditional divisions. If you set less effort, then when entering a long self.tapping screw into the raw wood, a “ratchet” begins to work.

Electric screwdriver: an unsuccessful test that did not surprise

This practical test consists in entering screws with a length of 50 mm and a diameter of 3.5 mm into a dry tree (pine). Before work, the battery is completely charged.

The electric screwdriver in question worked for about 47 minutes almost without interruptions. During this time, 387 screws managed to screw.

This is less than the fellow soldier PowerMax Bs Basic managed to screw. Less is not much. Hence the conclusion: the brilliant engine did not increase the efficiency of the tool. Perhaps not reduced (errors of such a measurement also cannot be ignored). But what did not increase is a fact.

Finally, here is the tablet. a constant element of our screwdriver reviews. It provides a battery capacity of the tested screwdrivers in watt hours and the number of wrapped screws in pieces. Of these numbers, it is not difficult to calculate the amount of energy spent by an electric screwdriver on the entrance of one self.tapping screw. It turns out efficiency. The higher its value. the more effective the electric screwdriver.

Model capacity of the battery, WT h (in mA h) screws screwed up, pcs. Efficiency (more = better)
DEKO GCD12DU3 eighteen 210 11.7
Kolner KCD 12M 12 28 2.3
Zitrek Green 12 eighteen 222 12.3
Bosch IXO 5.4 0 0.0
Stanley SBD201M2K 72 1293 18.0
Tonfon 12V 24 376 15.7
Worx Aidrill WX178 40 750 18.8
BlackDecker BL186K1B2 36 717 19.9
Metabo Powermax Bs Basic 24 413 17.2
Metabo PowerMaxx BS BL 24 387 16.1

Electric screwdriver: torque. A good impression test

Twisting the moment is the power with which the spindle with the cartridge rotates. The torque we measure at the simple stand (its detailed description is given here).

Any electric screwdriver is equipped with an effort sensor. This system turns off the engine power after a second or two three after blocking, this is done in most screwdrivers. Yes, we met screwdrivers and with a different character. Sharp and fast as a stomach disorder. When blocking the spindle, they turned off the engine almost instantly. But the electrical screwdriver in question is rather similar to an apathetic stronger: the engine turns off after three seconds after blocking the spindle. Thanks to this, it was not difficult to remove the necessary indications: 19.5 n m.

Recall that the manufacturer indicates a different value of torque, 34 N m. Nothing special, almost all brands do so. Someone overestimates less than half, like Metabo. And someone-and 8 times, there are such heroes.

The next plate shows the twisting moments of different screwdrivers that have passed through our stand. The tested screwdrivers are sorted by the dates of publication of reviews (above. earlier, lower. later), and the name of the model is a link to the published review of this tool.

Model kr. Passport moment, n m kr. moment measured, n m discrepancy, since
DEKO GCD12DU3 32 7 4.6
Kolner KCD 12M fourteen 7 2.0
Zitrek Green 12 32 four 8.0
Bosch IXO 4.5 3.5 1.3
Stanley SBD201M2K 55 55 1.0
Tonfon 12V 25 12.5 2.0
Worx Aidrill WX178 twenty 8.3 2.4
BlackDecker BL186K1B2 52
Metabo Powermax Bs Basic 34 19.5 1.7

Summing up the measurement of the torque, we note: the electric screwdriver makes it possible to adjust the force in the range from 1 to 20 conditional divisions of the adjusting coupling. In the vast majority of cases, we used the average level of effort, about 10 parrots. Only sometimes, when a self.tapping screw enters the knot, it was necessary to expose an effort close to the maximum. otherwise a rattler was triggered.

Electric screwdriver: an unsuccessful test, sincerely surprised

This practical test consists in entering screws with a length of 50 mm and a diameter of 3.5 mm into a dry tree (pine). Before work, the battery is charged “until it stops”.

The electric screwdriver in question worked for about 50 minutes (with interruptions, of course), for which 413 screws managed to screw.

Finally, here is the tablet. a constant element of our screwdriver reviews. It provides a battery capacity of the tested screwdrivers in watt hours and the number of wrapped screws in pieces. Of these numbers, it is not difficult to calculate the amount of energy spent by an electric screwdriver on the entrance of one self.tapping screw. It turns out efficiency. The higher its value. the more effective the electric screwdriver.

Model capacity of the battery, WT h (in mA h) screws screwed up, pcs. Efficiency (more = better)
DEKO GCD12DU3 eighteen 210 11.7
Kolner KCD 12M 12 28 2.3
Zitrek Green 12 eighteen 222 12.3
Bosch IXO 5.4 0 0.0
Stanley SBD201M2K 72 1293 18.0
Tonfon 12V 24 376 15.7
Worx Aidrill WX178 40 750 18.8
BlackDecker BL186K1B2 36 717 19.9
Metabo Powermax Bs Basic 24 413 17.2

Briefly: 17.2. magnificent indicator! The efficiency of this electric screwdriver has the level of products of such legendary brands as Worx or Stanley. Want!

Electric screwdriver: battery

The attached charger has modest sizes and a “melted” shape. The battery is inserted into the intended nest, while turning on and begins to blink the green LED charging.

Flashing continues until the battery is fully charged. After that, the LED goes into a continuous glow mode. The second LED, which on the right, is designed to notify the battery malfunction or its overheating.

Reviews Metabo Powermax Bs Basic

Often blocking the start buttons, the battery contacts depart, the gearbox hangs and ultimately it falls forward! After a couple of months, the cartridge begins to click in the frequent place of squeezing the equipment and has a larger backlash on the axis. The battery hangs in the handle of an electric screwdriver. The equipment is slightly better than Chinese for hiring, the bats break with a bang. Drill 6mm laminated wood-brown plate 25 percood shurik turns off from overload.

The screwdrivers were used to assemble furniture, the maximum euro.flower 70mm in the prepared holes and nuts M6 in children’s chairs for kindergarten. His German version with Chinese is the earth and the sky! Even the battery failed and were replaced under the guarantee. I do not recommend the quality of cheap electric screwdriver for 4 thousand! There are the best analogues for the same price.

I bought it a year ago to replace Makita, from which the batteries began to die (she correctly served me 7 years in non-stop without a single breakdown). I needed a universal, relatively light and reliable electric screwdriver. I got used to the balance and weight very quickly, I used mainly on the partitions of the GCL, it is very convenient with the holster. I practically did not use a change of head, but in general it is very convenient. The suitcase is huge! A different little things like roulette, corner, scissors, bit, etc. got into it. p t. e. what had to be worn separately. In general, it would be the perfect electric screwdriver if after three months of use from the vent. holes on the sides would not fly out pieces of impeller (plastic thing that cools the motor). It seemed to be not interfering with work, but recently at the responsible object the engine stupidly died, a little rise. There were no loads! I understand that the wreckage of plastic from the impeller beat the motor and it burned down. The case is initially unarantal, since mechanical damage. Ordered a new motor (1200 rupees). A month of downtime. T. e. The impeller was with a defect from the plant and my case is not the first. I have a trowel and a Metabo peorator, while everything works fine, but with an electric screwdriver sadness. It is a pity that the manufacturer does not follow the quality of such important components, and Chinese quality may be good. The tool is not cheap and the next time I will think very well when buying a Metabo tool. I will not recommend it either, t. to. There is a high risk to stay in the middle of an object without a tool.

Small, light, powerful, battery charge for a couple of days exactly with average use (4 ampere hours), convenient suitcase, good equipment. Good backlight.

In the second generation, some problems with the battery periodically appear, do not want to twist until you knock on a shur, reliability, sunk with 80 cm and something broke inside (some pieces of plastic and magnets), but twisted. The corner nozzle was covered on 3 use (a squeezer ring burst. no protection against overload. Furious 1.5 years.

I took it to a construction site. The choice fell on Metabo because only he had 4 A batteries. h. Before him was Bosch 9.6, I have grown up for 4 years and for another 3 years in a garage from a familiar car mechanic. The battery died. Then AEG is still blue-8 years old, and still tries to twist, AEG orange and Dewalt at the age of 2 planted batteries. Metabo is the first in which the engine died. When I dismantled the case, something reminiscent of a brush fell out. When the engine was opened, I saw that a plate was erased about the collector into which the brush was inserted (the plate plays the role of the spring, the fasteners of the brush and wires at the same time) the engine is assembled on the bushings and not on the bearings. It is good that there is a second one (used for about six months, and the engine is already hiding), otherwise I would not know where to put the batteries (although 4 batteries of 4 A. h. Busting for one electric screwdriver). P. S. took 8 thousand each. The price is clearly overstated. In return I bought Bosch 10.8 with a bronnial engine.

I bought an electric screwdriver, made a guarantee for 3 years, after 14 months of work without special loads (installation of drywall, plastic)-the gear was broken, the service is used to repair, the meaning of the guarantee, take a professional electric screwdriver for one year of work. Too cool! I do not recommend anyone. for myself I decided to better take the cheap, it is not a pity to throw it out!

Efficiently made, capacious batteries (I have 2A), perfectly balanced, no beats. There is a backlight, a battery discharge indicator. Good, roomy case.

Powerful and convenient screwdriver. The pen may seem too thick for someone, but for my claw. Most. I took the rally with 45 rampages in a suitcase, in the form of bit and a no worse quality. Type of “young fighter” set. I went to take Bosch GSR 10.8-2-Li, but this one somehow liked it, although more expensive by 35%.

I make cabinet furniture and before that I worked with screwdrivers of different brands. Makita, which has been produced in recent years, has greatly disappointed. The gearbox breaks, the batteries die, bulky. Bosch, is also not the one that was before. This tool connects all the best to work with furniture. The size is recordly small, allows you to crawl into any inaccessible places, and when you like a cartridge, it becomes generally short. The backlight is made successfully, it is a pleasure to twist in the corner sections, now you don’t have to hold a flashlight with your second hand. The battery in the handle, you can’t think of it better, the minimum dimensions for an electric screwdriver, with a powerful (2Ach) battery. The best combination. Although some write that the pen is too big, I can’t agree. The girth of the thumb and index fingers is ergonomic, the amusing, which is necessary. Holds one battery all day intensive work (10 hours) and this is more than a decent result. There were no defects described above, apparently it depends either on the party or an identical fake caught.I advise this model, but take advice in specialized stores. Compared with Devolt 10 Tyvatov, but he has a battleship of the battery and problems with the anchor (illness or low.quality fasteners), when the hit is telephone in the case.As for the case, I can only add that this is a wonderful spacious suitcase, I do not wear an electric screwdriver in it, but for a different small tool that I need.

Convenient and balanced, strong case, a removable cartridge (very pleased), I liked it and after 6 months I bought the 2nd such

I bought it in vain! Which is younger at the load at the 1st speed tries to switch to the 2nd stuck in the middle and cracks. “Old” a year later twists through (from a pusher) the LED burns when pressed (as expected). Expected more from Metabo more, I will send it to the service I will see what they will please.

Reviews Metabo Powermax Bs Quick Basic 2.0ah X2 Case

Be careful with screwdrivers without protection against overload. Situation: I bought one for the assembly of furniture, gave two jamshuts and went for lunch. I come. They say “does not work”. And they plowed him corny, not understanding that it was impossible to squeeze the button after a complete tightening without rotation. burn.

But in general, the device is excellent, lightweight, convenient. It’s good to stab in burned nuts)) I bought another one, but I don’t give jamshuts))

Neat and compact, and with a cartridge removed. so the baby.2. A very decent moment (34 Nm)-at the level of “full-size” shuriks of 5-7 years ago on Nickel-Kadmia.3. “Adult” cartridge 1 10 mm. And he is one.button. t.e. for (from-) it is twisted with one hand, because in the gearbox there is a brake of a free move.four. Great 2 Ach batteries are very long.lasting! It is difficult to describe the duration of work, but their superiority over the usual 1.3 1.5 ah is clearly visible.5. Ergonomic. sits comfortably in the hand. Since this is individually, I note that my brush is narrow with long fingers that fully cover the handle. Obviously, short.fingered or broad.minded will not be so good 6. Nonal. The handle is partially rubbed. over, the rubber is dense, I will even assume that the durable.7. Adequate charge indicator and backlight. The backlight shines quite decently, despite the flawed location under the cartridge. in this version it is quite shaded by it. However, the diffuser saves the situation (on the “full.sized” shuriks, the “correct” backlight is done on the basis, immediately above the battery. the best lighting is obtained).eight. Immediately equipped with a clip for hanging on a belt, rearranged on one side to the other.9. High.quality performance. despite the survey, the backlash of the cartridge is imperceptible.ten. Good quality of the case: hinge loops, metal fasteners, non.fragile thick plastic.

In my opinion, the main drawback of the Quick version (for some reason not indicated in other reviews) is that the fasteners are almost not magnetizing to the beats inserted into the spindle instead of the cartridge (and the bats themselves magnetize in the spindle with a click). Only the smallest screws are kept more or less, caliber 3.512.16 mm. This is done so that the spindle does not pour with sawdust, but how inconvenient it is! After all, you remove the cartridge to reduce dimensions in a cramped place, but instead of the bat, you have to insert a magnetic holder of the bat, otherwise the self.tapping screw will fall. and where is the winnings? There are separate external magnets and holders, for example, Dwalt Dwa2SLVIR and DWA3HLDIR, or USH BIG II, or Wiha 36800 and T.P., But they are expensive, rare, long and twice as thick as.

In other words, it is inconvenient to use a shur without a cartridge. the fasteners falling from the bat are pretty picked up; And with the holder-it is somehow pointless, because I wanted to be shorter.

In general, a very controversial solution spoiling the very idea of ​​a removable cartridge.

Spindle, second claim (in fact, an error of inattentive reviewers): in some places the idea is that you can supposedly insert a short bit of 25 mm and put a cartridge right on top of it. No, you can’t. Either a bit or a cartridge. By the way, to extract 25 mm bits from a spindle is still a task, it is deep. 3. Large ventilation holes in the housing: it is very easy to fill the engine with sawdust strokes. Steel, “hanging” inside on magnets, will finish its windings.four. I regularly cross the reverse switch to another position just when the grip changes. I used to sin on himself, clubfoot. No, others have the same.5. On _MA_ _LICHALAUS. a huge stupid case. To assess the size: if you remove the partitions inside, then 8 (eight) such shuriks can be put in it, four in two layers. Or one large vertical SDS-PLUS peorator, such as Makita HR2810, also with drill. And if the partitions are not removed, then the case is so combined that there remains a lot of free, but an uncomfortable place.

(did not fit into the “shortcomings”) (I know that the case is common for both Quick’s configurations. but it is also very redundant for “upper” with the battery of 24 Ah and the corner adapter) in the photo compared to the case from the same Shurik Makita DF330.6. The cartridge is very “shallow” due to the survey and small size. This is not a drawback, but rather a feature. However, in the review below there is a complaint about self.disclosure (weakening of the cams) of the cartridge. perhaps this is a consequence of compactness.7. There were some doubts about reliability with an advance. here in the reviews there are already a bunch of complaints to the stiff gears, a trigger, even an engine; and to assess the “guarantee” of cases by services.

How to evaluate it? I’ll try to reduce the particular in community 🙂

As an electric screwdriver in general. It is excellent: convenient, light, small and powerful; able to be the only one in the house. For this “5” without reservation.

Is it worth the version of Quick of a significant surcharge, having a serious flaw in the main “highlight” and sincerely “charged” price? Hardly. Therefore, I know the listed ahead of time. for the second time, QUICK would not buy; BS is no worse.

For most matters, more than a fairly cheap version of BS, especially after refinement; even with one battery. If anyone does not know: in the basic version of this Shurik (just BS. without quick) there is an undercamed opportunity to make “fast.time” bits with puck drilling in the cartridge, see. YouTube “Metabo Powermax Bs (Magic Refinement)”.

And the execution of BS in 1.5. 2 times cheaper than Quick of different completings: 6 tons.R. Against 9.5 t.R. (my quick 2akb 2 ah zm) and up to 12-14 tons.R. (Quick ACB 24 Ach ZU corner adapter) (12.2017).

Flaws

Surprisingly, this model has very few deficiencies. In this case, the detected defects are mainly associated with the convenience of operation. This is how it looks:

  • Constantly working backlight. The diode lantern does not turn off until the “Start” key is pressed, respectively, the battery is discharged faster.
  • Noticeable beating of the drill when working with a clamping cartridge.
  • Clips for waist wearing of the tool is not made up: dinters may fall.
  • Batteries are sensitive to minus temperatures.
  • Strange shape of the handle of the plastic case: the load is distributed to the fingers, leaving the palm of the unchained.

If the battery drill is purchased for frequent use, then it is the best option. The product has good power, which organically combines with compact dimensions. Please note that even after a year of work, the tool works with the previous performance, which indicates high quality assembly.

However, this tool is poorly suitable for accurate drilling solid materials. When working with metal, accuracy falls, the tool begins to heat up and vibrate. Given that we are talking about a screwdriver, we will not find fault with this nuance.

, However, given the high wear resistance of the details, the purchase justifies itself for a long service life. By the way, the manufacturer offers an expanded warranty period: 3 years against standard 12 months. To use the service, just go through the registration procedure on the official website of Metabo.

Considering that this model is fully consistent with the declared characteristics, the Metabo drill can be evaluated to the maximum: 10 balls out of 10.